A Tribological Comparison of Facet Joint, Sacroiliac Joint, and Knee Cartilage in the Yucatan Minipig

Biochemical and biomechanical characterization of the cervical, thoracic, and lumbar facet joint cartilage in the Yucatan minipig

Facet joint arthrosis causes pain in approximately 7 % of the U.S. population, but current treatments are palliative. The objective of this study was to elucidate structure-function relationships and aid in the development of future treatments for the facet joint. This study characterized the articular surfaces of cervical, thoracic, and lumbar facet cartilage from skeletally mature (18-24 mo) Yucatan minipigs. The minipig was selected as the animal model because it is recognized by the U.S. Food and Drug Administration (FDA) and the American Society for Testing and Materials (ASTM) as a translationally relevant model for spine-related indications. It was found that the thoracic facets had a ∼2 times higher aspect ratio than lumbar and cervical facets. Lumbar facets had 6.9-9.6 times higher % depth than the cervical and thoracic facets. Aggregate modulus values ranged from 135 to 262 kPa, much lower than reported aggregate modulus in the human knee (reported to be 530-701 kPa). The tensile Young's modulus values ranged from 6.7 to 20.3 MPa, with the lumbar superior facet being 304 % and 286 % higher than the cervical inferior and thoracic superior facets, respectively. Moreover, 3D reconstructions of entire vertebral segments were generated. The results of this study imply that structure-function relationships in the facet cartilage are different from other joint cartilages because biochemical properties are analogous to other articular cartilage sources whereas mechanical properties are not. By providing functional properties and a 3D database of minipig facet geometries, this work may supply design criteria for future facet tissue engineering efforts.

Navigating regulatory pathways for translation of biologic cartilage repair products

Long-term clinical repair of articular cartilage remains elusive despite advances in cartilage tissue engineering. Only one cartilage repair therapy classified as a "cellular and gene therapy product" has obtained Food and Drug Administration (FDA) approval within the past decade although more than 200 large animal cartilage repair studies were published. Here, we identify the challenges impeding translation of strategies and technologies for cell-based cartilage repair, such as the disconnect between university funding and regulatory requirements. Understanding the barriers to translation and developing solutions to address them will be critical for advancing cell therapy products for cartilage repair to clinical use.

Yucatan Minipig Knee Meniscus Regional Biomechanics and Biochemical Structure Support its Suitability as a Large Animal Model for Translational Research

Knee meniscus injuries are the most frequent causes of orthopedic surgical procedures in the U.S., motivating tissue engineering attempts and the need for suitable animal models. Despite extensive use in cardiovascular research and the existence of characterization data for the menisci of farm pigs, the farm pig may not be a desirable preclinical model for the meniscus due to rapid weight gain. Minipigs are conducive to in vivo experiments due to their slower growth rate than farm pigs and similarity in weight to humans. However, characterization of minipig knee menisci is lacking. The objective of this study was to extensively characterize structural and functional properties within different regions of both medial and lateral Yucatan minipig knee menisci to inform this model’s suitability as a preclinical model for meniscal therapies. Menisci measured 23.2–24.8 mm in anteroposterior length (33–40 mm for human), 7.7–11.4 mm in width (8.3–14.8 mm for human), and 6.4–8.4 mm in peripheral height (5–7 mm for human). Per wet weight, biochemical evaluation revealed 23.9–31.3% collagen (COL; 22% for human) and 1.20–2.57% glycosaminoglycans (GAG; 0.8% for human). Also, per dry weight, pyridinoline crosslinks (PYR) were 0.12–0.16% (0.12% for human) and, when normalized to collagen content, reached as high as 1.45–1.96 ng/µg. Biomechanical testing revealed circumferential Young’s modulus of 78.4–116.2 MPa (100–300 MPa for human), circumferential ultimate tensile strength (UTS) of 18.2–25.9 MPa (12–18 MPa for human), radial Young’s modulus of 2.5–10.9 MPa (10–30 MPa for human), radial UTS of 2.5–4.2 MPa (1–4 MPa for human), aggregate modulus of 157–287 kPa (100–150 kPa for human), and shear modulus of 91–147 kPa (120 kPa for human). Anisotropy indices ranged from 11.2–49.4 and 6.3–11.2 for tensile stiffness and strength (approximately 10 for human), respectively. Regional differences in mechanical and biochemical properties within the minipig medial meniscus were observed; specifically, GAG, PYR, PYR/COL, radial stiffness, and Young’s modulus anisotropy varied by region. The posterior region of the medial meniscus exhibited the lowest radial stiffness, which is also seen in humans and corresponds to the most prevalent location for meniscal lesions. Overall, similarities between minipig and human menisci support the use of minipigs for meniscus translational research.

A review of advances in tribology in 2020–2021

Around 1,000 peer-reviewed papers were selected from 3,450 articles published during 2020–2021, and reviewed as the representative advances in tribology research worldwide. The survey highlights the development in lubrication, wear and surface engineering, biotribology, high temperature tribology, and computational tribology, providing a show window of the achievements of recent fundamental and application researches in the field of tribology.