Mammalian Genotyping Using Acoustic Droplet Ejection for Enhanced Data Reproducibility, Superior Throughput, and Minimized Cross-Contamination

Flexible Pico-Liter Acoustic Droplet Ejection Based on High-Frequency Ultrasound Transducer

Acoustic droplet ejection (ADE) uses the acoustic energy produced by a focused ultrasound beam to provide a noncontact, highly precise, automatic, and cost-effective liquid transfer method for life science applications. The reported minimum precision of the current acoustic liquid transfer technology is 1 nL. Since precision improvement always brings valuable results in biological research, it is highly necessary to develop pico-liter precision liquid transfer technology. In this work, we developed a 40-MHz ultrahigh -frequency focused ultrasound transducer with a large aperture of 7×7 mm² and a wide bandwidth of 76.4%. The designed transducer can successfully eject pico-liter droplets, and the droplet ejection accuracy ranges from 28 to 439 pL. The effects of the acoustic parameters, including excitation amplitude, pulsewidth, and frequency, on the size of the ejected droplet were studied. A wide range of ejected droplet sizes could be obtained by adjusting the acoustic parameters, thereby making liquid transfer flexible. The flexible pico-liter liquid transfer based on the wide-bandwidth, high-frequency ultrasound transducer is easier to achieve automatically, and thus it has broad prospects in biological research and industrial applications.

A review on acoustic droplet ejection technology and system

The pace of change in chemical and biological research enabled by improved detection systems demands fundamental liquid handling and sample preparation changes. The acoustic droplet ejection (ADE)-based liquid handling method has the advantages of improving precision and data reproducibility, reducing costs, hands-on time, and eliminating waste. ADE gradually replaced traditional aspiration-and-dispense liquid-handling robots in applications such as synthetic biology, genotyping, personalized medicine, and next-generation sequencing. This review emphatically introduces the setup of the ADE system and the critical technologies of each part, including acoustic droplet generation, optimized design of the source fluid wells, droplet coalescence, and power control. The advantages and disadvantages of these technologies are discussed, and the future development of acoustic droplet ejection technology is also predicted.

Unlocking the efficiency of genomics laboratories with robotic liquid-handling

In research and clinical genomics laboratories today, sample preparation is the bottleneck of experiments, particularly when it comes to high-throughput next generation sequencing (NGS). More genomics laboratories are now considering liquid-handling automation to make the sequencing workflow more efficient and cost effective. The question remains as to its suitability and return on investment. A number of points need to be carefully considered before introducing robots into biological laboratories. Here, we describe the state-of-the-art technology of both sophisticated and do-it-yourself (DIY) robotic liquid-handlers and provide a practical review of the motivation, implications and requirements of laboratory automation for genome sequencing experiments.

Quantifying and Understanding Well-to-Well Contamination in Microbiome Research

Microbial sequences inferred as belonging to one sample may not have originated from that sample. Such contamination may arise from laboratory or reagent sources or from physical exchange between samples. This study seeks to rigorously assess the behavior of this often-neglected between-sample contamination. Using unique bacteria, each assigned a particular well in a plate, we assess the frequency at which sequences from each source appear in other wells. We evaluate the effects of different DNA extraction methods performed in two laboratories using a consistent plate layout, including blanks and low-biomass and high-biomass samples. Well-to-well contamination occurred primarily during DNA extraction and, to a lesser extent, in library preparation, while barcode leakage was negligible. Laboratories differed in the levels of contamination. Extraction methods differed in their occurrences and levels of well-to-well contamination, with plate methods having more well-to-well contamination and single-tube methods having higher levels of background contaminants. Well-to-well contamination occurred primarily in neighboring samples, with rare events up to 10 wells apart. This effect was greatest in samples with lower biomass and negatively impacted metrics of alpha and beta diversity. Our work emphasizes that sample contamination is a combination of cross talk from nearby wells and background contaminants. To reduce well-to-well effects, samples should be randomized across plates, samples of similar biomasses should be processed together, and manual single-tube extractions or hybrid plate-based cleanups should be employed. Researchers should avoid simplistic removals of taxa or operational taxonomic units (OTUs) appearing in negative controls, as many will be microbes from other samples rather than reagent contaminants.IMPORTANCE Microbiome research has uncovered magnificent biological and chemical stories across nearly all areas of life science, at times creating controversy when findings reveal fantastic descriptions of microbes living and even thriving in what were once thought to be sterile environments. Scientists have refuted many of these claims because of contamination, which has led to robust requirements, including the use of controls, for validating accurate portrayals of microbial communities. In this study, we describe a previously undocumented form of contamination, well-to-well contamination, and show that this sort of contamination primarily occurs during DNA extraction rather than PCR, is highest with plate-based methods compared to single-tube extraction, and occurs at a higher frequency in low-biomass samples. This finding has profound importance in the field, as many current techniques to "decontaminate" a data set simply rely on an assumption that microbial reads found in blanks are contaminants from "outside," namely, the reagents or consumables.

High-Throughput Miniaturized 16S rRNA Amplicon Library Preparation Reduces Costs while Preserving Microbiome Integrity

Next-generation sequencing technologies have enabled many advances across biology, with microbial ecology benefiting primarily through expanded sample sizes. Although the cost of running sequencing instruments has decreased substantially over time, the price of library preparation methods has largely remained unchanged. In this study, we developed a low-cost miniaturized (5-µl volume) high-throughput (384-sample) amplicon library preparation method with the Echo 550 acoustic liquid handler. Our method reduces costs of library preparation to $1.42 per sample, a 58% reduction compared to existing automated methods and a 21-fold reduction from commercial kits, without compromising sequencing success or distorting the microbial community composition analysis. We further validated the optimized method by sampling five body sites from 46 Pacific chub mackerel fish caught across 16 sampling events over seven months from the Scripps Institution of Oceanography pier in La Jolla, CA. Fish microbiome samples were processed with the miniaturized 5-µl reaction volume with 0.2 µl of genomic DNA (gDNA) and the standard 25-µl reaction volume with 1 µl of gDNA. Between the two methods, alpha diversity was highly correlated (R 2 > 0.95), while distances of technical replicates were much lower than within-body-site variation (P < 0.0001), further validating the method. The cost savings of implementing the miniaturized library preparation (going from triplicate 25-µl reactions to triplicate 5-µl reactions) are large enough to cover a MiSeq sequencing run for 768 samples while preserving accurate microbiome measurements. IMPORTANCE Reduced costs of sequencing have tremendously impacted the field of microbial ecology, allowing scientists to design more studies with larger sample sizes that often exceed 10,000 samples. Library preparation costs have not kept pace with sequencing prices, although automated liquid handling robots provide a unique opportunity to bridge this gap while also decreasing human error. Here, we take advantage of an acoustic liquid handling robot to develop a high-throughput miniaturized library preparation method of a highly cited and broadly used 16S rRNA gene amplicon reaction. We evaluate the potential negative effects of reducing the PCR volume along with varying the amount of gDNA going into the reaction. Our optimized method reduces sample-processing costs while continuing to generate a high-quality microbiome readout that is indistinguishable from the original method.

Efficient mapping of transgene integration sites and local structural changes in Cre transgenic mice using targeted locus amplification

Cre/LoxP technology is widely used in the field of mouse genetics for spatial and/or temporal regulation of gene function. For Cre lines generated via pronuclear microinjection of a Cre transgene construct, the integration site is random and in most cases not known. Integration of a transgene can disrupt an endogenous gene, potentially interfering with interpretation of the phenotype. In addition, knowledge of where the transgene is integrated is important for planning of crosses between animals carrying a conditional allele and a given Cre allele in case the alleles are on the same chromosome. We have used targeted locus amplification (TLA) to efficiently map the transgene location in seven previously published Cre and CreERT2 transgenic lines. In all lines, transgene insertion was associated with structural changes of variable complexity, illustrating the importance of testing for rearrangements around the integration site. In all seven lines the exact integration site and breakpoint sequences were identified. Our methods, data and genotyping assays can be used as a resource for the mouse community and our results illustrate the power of the TLA method to not only efficiently map the integration site of any transgene, but also provide additional information regarding the transgene integration events.

Acoustic Droplet Ejection Technology and Its Application in High-Throughput RNA Interference Screening

The development of acoustic droplet ejection (ADE) technology has resulted in many positive changes associated with the operations in a high-throughput screening (HTS) laboratory. Originally, this liquid transfer technology was used to simply transfer DMSO solutions of primarily compounds. With the introduction of Labcyte's Echo 555, which has aqueous dispense capability, the application of this technology has been expanded beyond its original use. This includes the transfer of many biological reagents solubilized in aqueous buffers, including siRNAs. The Echo 555 is ideal for siRNA dispensing because it is accurate at low volumes and a step-down dilution is not necessary. The potential for liquid carryover and cross-contamination is eliminated, as no tips are needed. Herein, we describe the siRNA screening platform at Southern Research's HTS Center using the ADE technology. With this technology, an siRNA library can be dispensed weeks or even months in advance of the assay itself. The protocol has been optimized to achieve assay parameters comparable to small-molecule screening parameters, and exceeding the norm reported for genomewide siRNA screens.