Review article: Total wrist arthroplasty

The Three-Dimensional Relationship of the Axes of the Capitate and Third Metacarpal

PURPOSE

We quantified the morphology and angulation of the third metacarpal (MC3) relative to the capitate using three-dimensional computed tomography data to inform surgical procedures such as total wrist arthroplasty and wrist arthrodesis. Specifically, we report the three-dimensional location of the intersections of the long axis of MC3 axis with the capitate cortical surface, the sagittal and coronal angles between the MC3 and capitate axes, and the MC3 shaft angle in the sagittal plane. We tested the hypothesis that these metrics did not differ between women and men.

METHODS

Three-dimensional bone models of the capitate and MC3 were analyzed in 130 subjects (61M and 69F). Long axes of the MC3 and capitate were computed. The intersection of the metacarpal long axis with the cortical surface of the capitate, the angle between the metacarpal-capitate axes, and metacarpal shaft angle were calculated and compared between men and women.

RESULTS

The long axis of the MC3 intersected the capitate at two locations on the outer cortical surface of the capitate. The proximal intersection was located near the midportion of the capitate, whereas the distal intersection was typically located within the capitate-MC3 articulation. The angle between the axes of the capitate and MC3 in the sagittal plane was a mean of 15°, ranging from 5° to 23°. The mean sagittal MC3 shaft angle was 166° and ranged from 158° to 173°.There were only subtle differences in these metrics between the sexes.

CONCLUSIONS

The long axis of the MC3 penetrates the dorsal surface of the capitate about its midportion, but there is notable variation in this location as well as in the angular relationships.

CLINICAL RELEVANCE

Three-dimensional measurements of the relationships between the third metacarpal and the capitate may serve as an important reference for the placement of intramedullary wires, plates, devices, and prosthetics.

Total Wrist Replacement Outcomes in the Asian Pacific Population - A Single-Centre Result

Background: Total wrist replacement (TWR) is rarely done in the Asia-Pacific region. The aim of this study is to report the surgical outcomes and experience of TWR in patients with advanced arthritis. Methods: This is a retrospective review of all TWR patients in the Department of Orthopaedics and Traumatology, Prince of Wales Hospital, Hong Kong, which is a university tertiary centre, from January 2004 to March 2023. Recorded demographic parameters include gender, age upon surgery, pathology, types of implants and follow-up period. The surgical outcome parameters include range of motion, grip strength, wrist function assessment, radiological and clinical complications and any related secondary operations. Postoperative X-ray and clinical notes were reviewed. All wrist function assessments were performed by specialised occupational therapists according to protocol. Results: The study included a total of 12 wrists of 10 patients, all Chinese-Asian, with a mean age of 61.4 years at surgery. Larsen grade V arthritis constituted 50% and grade IV 16.7% of the patients, amongst which 33% had volar subluxation. The mean follow-up period was 97.4 months (21-205 months). The mean grip strength was 64.2% of the unaffected side. The mean postoperative Disabilities of Arm, Shoulder and Hand (DASH) score was 41.12% and patient-rated wrist/hand evaluation (PRWE) score 18.0. Complication incidence was 16.67% for loosening, 8.3% for metallosis and 8.3% for infection. One patient required conversion to total wrist arthrodesis due to metallosis. No patient suffered from dislocation, periprosthetic fracture and infection. Conclusions: TWR is an effective and safe alternative to total wrist arthrodesis with comparable outcomes. Our series outcomes are satisfactory and in line with literature. With meticulous soft tissue release and balancing, volar subluxation can also be corrected and may not be a contraindication. Level of Evidence: Level IV (Therapeutic).

Intra Articular Injection of Autologous Microfat and Platelets-Rich Plasma in the Treatment of Wrist Osteoarthritis: A Pilot Study

No injection treatment has been proven to be effective in wrist osteoarthritis. When conservative measures fail, its management involves invasive surgery. Emergence of biotherapies based on adipose derived stem cells (ADSC) offers promising treatments for chondral degenerative diseases. Microfat (MF) and platelets-rich plasma (PRP) mixture, rich in growth factors and ADSC could be a minimally invasive injectable option in the treatment of wrist osteoarthritis. The aim of this uncontrolled prospective study was to evaluate the safety of a 4 mL autologous MF-PRP intra-articular injection, performed under local anesthesia. The secondary purpose was to describe the clinical and MRI results at 12 months of follow-up. Patients' data collected were: occurrence of adverse effects, Visual analog scale (VAS), Disabilities of the Arm, Shoulder and Hand score (DASH) and Patient-Rated Wrist Evaluation (PRWE) scores, wrist strength, wrist range of motion and 5-level satisfaction scale. No serious adverse event was recorded. A statistically significant decrease in pain, DASH, PRWE and force was observed at each follow-up. Our preliminary results suggest that intra-articular autologous MF and PRP injection may be a new therapeutic strategy for wrist osteoarthritis resistant to medical symptomatic treatment prior to surgical interventions.

Prosthetic and robotic wrists comparing with the intelligently evolved human wrist: A review

Both prosthetic and robotic research communities have tended to focus on hand/gripper development. However, the wrist unit could enable higher mobility of the end effector and thus more efficient and dexterous manipulation. The current state of the art in both prosthetic and robotic wrists is reviewed systematically, mainly concerning their kinematic structures and resultant capabilities. Further, by considering the biomechanical advantages of the human wrist, an evaluation including the mobility, stability, output capability, load capacity and flexibility of the current artificial wrists is conducted. With the pentagonal capability radar charts, the major limitations and challenges in the current development of artificial wrists are derived. This paper hence provides some useful insights for better robotic wrist design and development.

Total Wrist Arthroplasty-A Systematic Review of the Outcome, and an Introduction of FreeMove-An Approach to Improve TWA

The Swanson silicone prosthesis was one of the first devices to realize total wrist arthroplasty (TWA). It has been used regularly since the early 1960s. This systematic review of the literature evaluated the status quos of TWA. The present study was conducted according to the PRISMA guidelines. A literature search was made in Medline, PubMed, Google Scholar, and the Cochrane Library databases. The focus of the present study was on implant survivorship and related functional outcomes. Data from 2286 TWA (53 studies) were collected. Fifteen studies were included for the analysis of implant survivorship. Fifteen studies were included for the analysis of pain. Twenty-eight studies were included for the analysis of the Disabilities of the Arm, Shoulder, and Hand (DASH) score. Grip strength was tracked in 16 studies. The range of motion (RoM) was evaluated in 46 studies. For supination and pronation, 18 articles were available. Despite some methodological heterogeneities, TWA may be effective and safe in pain reduction and improving function and motion. There is still a range for a future improvement of the procedure.

Long-Term Results of Universal 2 Total Wrist Arthroplasty

Background  The Universal 2 is a widely used total wrist implant that aims to maintain function of the wrist. Purpose  Promising mid-term results of the Universal 2 total wrist implant are described in the literature. This study evaluates the long-term results in terms of implant survival and patient satisfaction. Patients and Methods  Patients who received a Universal 2 implant between 2004 and 2009 were retrospectively identified through a database search. Clinical outcome and complications of the implant were assessed by examination of the patient's medical records, X-rays, and a questionnaire, consisting of the Patient-Rated Wrist and Hand Evaluation questionnaire (PRWHE) and Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaires and additional questions. Results  Twenty-five patients (26 wrists) were included in this study. Twenty-one (81%) Universal 2 implants remained in situ after a mean follow-up of 11 years. Moderate PRWHE (44) and QuickDASH (41) scores were found in these cases. Five Universal 2 implants failed and were converted to a total wrist arthrodesis after a mean period of 9.2 years due to distal component loosening ( n  = 3), recurrent luxation ( n  = 1), or recurrent synovitis ( n  = 1). Twenty-three (92%) patients were (very) satisfied with the Universal 2 implant. Conclusion  The Universal 2 demonstrates a high (81%) implant survival with a high patient satisfaction after a mean follow-up of 11 years. Prospective studies of the Universal 2 implant are necessary to objectify improvement in wrist function and to provide a better comparison to other fourth generation wrist implants.

Update on the operative treatment of scapholunate instability for radiologists. II. Salvage procedures, total wrist arthrodesis, and total wrist arthroplasty

Scapholunate (SL) instability is the most common form of carpal instability. Imaging (especially radiography) plays an important role in the staging, management, and postoperative follow-up of SL instability. In the final stage of SL instability, known as scapholunate advanced collapse, progressive degenerative changes occur at the carpal level. The goals of this article are to review the surgical options available for addressing the different stages of scapholunate advanced collapse, along with an emphasis on normal postoperative imaging and complications associated with each surgical option.

Strain shielding in distal radius after wrist arthroplasty with a current generation implant: An in vitro analysis

A systematic review of peer reviewed articles has shown that the main cause for wrist arthroplasty revision is carpal and radial prosthetic loosening and instability. To improve arthroplasty outcomes, successive generations of implants have been developed over time. The problem with the current generation of implants is the lack of long-term outcomes data. The aim of the present work was to test the hypothesis that the current generation Maestro WRS implant has a stress, strain and stability behaviour which may be associated with a reduced risk of long-term radial component loosening. This study was performed using synthetic radii to experimentally predict the cortex strain behaviour and implant stability considering different load conditions for both intact and implanted conditions. Finite element models were developed to assess the structural behaviour of cancellous-bone and bone-cement, these models were validated against experimentally measured cortex strains. Measured cortex strains showed a significant reduction between intact and implanted states. Cancellous bone adjacent to the radial body component suffers a two to threefold strain reduction, comparing with the intact condition, while along the radial stem, in the axial direction, a strain increase was observed. It is concluded that the use of contemporary Maestro WRS implant changes the biomechanical behaviour of the radius and is associated with a potential risk of bone resorption by stress-shielding in the distal radius region for wrist loads in the range of daily activities.