The distribution of bone mineral density in the femoral heads of unstable intertrochanteric fractures

3D extrusion printing of density gradients by variation of sinusoidal printing paths for tissue engineering and beyond

During extrusion printing of pasty biomaterials, internal geometries are mainly adjusted by positioning of straightly deposited strands which does not allow realization of spatially adaptable density gradients in x-, y- and z-direction for anisotropic scaffolds or anatomically shaped constructs. Herein, an alternative concept for printing patterns based on sinusoidal curves was evaluated using a clinically approved calcium phosphate cement (CPC). Infill density in scaffolds was adjusted by varying wavelength and amplitude of a sinus curve. Both wavelength and amplitude factors were defined by multitudes of the applied nozzle diameter. For CPC as a biomaterial ink in bone application, porosity, mechanical stiffness and biological response by seeded immortalized human mesenchymal stem cells - adhesion and pore bridging behavior - were investigated. The internal structure of a xyz-gradient scaffold was proven via X-ray based micro computed tomography (µCT). Silicone was used as a model material to investigate the impact of printing velocity and strand distance on the shape fidelity of the sinus pattern for soft matter printing. The impact of different sinus patterns on mechanical properties was assessed. Density and mechanical properties of CPC scaffolds were successfully adjusted without an adverse effect on adhesion and cell number development. In a proof-of-concept experiment, a sinus-adjusted density gradient in an anatomically shaped construct (human vertebral body) defined via clinical computed tomography (CT) data was demonstrated. This fills a technological gap for extrusion-based printing of freely adjustable, continuously guidable infill density gradients in all spatial directions. STATEMENT OF SIGNIFICANCE: 3D extrusion printing of biomaterials allows the generation of anatomically shaped, patient-specific implants or tissue engineering scaffolds. The density of such a structure is typically adjusted by the strand-to-strand distance of parallel, straight-meandered strands in each deposited layer. By printing in a sinusoidal pattern, design of density gradients is possible with a free, spatial resolution in x-, y- and z-direction. We demonstrated that porosity and mechanical properties can be freely adapted in this way without an adverse effect on cell adhesion. With the example of a CT dataset of a human spine, the anisotropic pattern of a vertebral body was resembled by this printing technique that can be translated to various patterns, materials and application.

Assessment of the Bone Mineral Density and Microstructure of the Human Femoral Head according to Different Tip-apex Distances Can Guide the Treatment of Intertrochanteric Hip Fractures

Purpose

We analyzed the microstructure and bone mineral density (BMD) of the trabecular bone in the femoral head of patients with osteoporosis.

Materials and Methods

Sixteen femoral heads with osteoporotic femoral neck fractures underwent micro-computed tomography scanning. In each tip-apex distance (TAD) of 15, 20, and 25 mm, five regions of interest (ROIs) were extracted from the central, anterior, posterior, superior, and inferior sections. A total of 15 ROIs were extracted from TADs of 15, 20, and 25 mm. The measurement parameters included BMD, percent bone volume: bone volume/total volume (BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), structural model index (SMI), and degree of anisotropy (DOA).

Results

The lowest BMD and BV/TV values were observed in the inferior region and differed significantly from those in other regions (P<0.05). Lower Tb.Th and Tb.N values were observed in the inferior region compared with those in the central region (P<0.05). The highest SMI value was observed in the inferior region (P<0.05). With TAD of 15 and 20 mm, the DOA values in the inferior region were lower than those in the anterior region (P<0.05). Lower BMD and BV/TV values were observed in the anterior, central, and inferior regions of TAD of 15 mm compared with those in the corresponding regions of TAD of 25 mm (P<0.05).

Conclusion

Positioning the lag screw between TAD of 20 to 25 mm and in the inferior region is recommended, and TAD of less than 15 mm is not recommended.

Automated segmentation of an intensity calibration phantom in clinical CT images using a convolutional neural network

PURPOSE

In quantitative computed tomography (CT), manual selection of the intensity calibration phantom's region of interest is necessary for calculating density (mg/cm³) from the radiodensity values (Hounsfield units: HU). However, as this manual process requires effort and time, the purposes of this study were to develop a system that applies a convolutional neural network (CNN) to automatically segment intensity calibration phantom regions in CT images and to test the system in a large cohort to evaluate its robustness.

METHODS

This cross-sectional, retrospective study included 1040 cases (520 each from two institutions) in which an intensity calibration phantom (B-MAS200, Kyoto Kagaku, Kyoto, Japan) was used. A training dataset was created by manually segmenting the phantom regions for 40 cases (20 cases for each institution). The CNN model's segmentation accuracy was assessed with the Dice coefficient, and the average symmetric surface distance was assessed through fourfold cross-validation. Further, absolute difference of HU was compared between manually and automatically segmented regions. The system was tested on the remaining 1000 cases. For each institution, linear regression was applied to calculate the correlation coefficients between HU and phantom density.

RESULTS

The source code and the model used for phantom segmentation can be accessed at https://github.com/keisuke-uemura/CT-Intensity-Calibration-Phantom-Segmentation . The median Dice coefficient was 0.977, and the median average symmetric surface distance was 0.116 mm. The median absolute difference of the segmented regions between manual and automated segmentation was 0.114 HU. For the test cases, the median correlation coefficients were 0.9998 and 0.999 for the two institutions, with a minimum value of 0.9863.

CONCLUSION

The proposed CNN model successfully segmented the calibration phantom regions in CT images with excellent accuracy.

Lack of periosteal apposition in the head and neck of femur after menopause in Chinese women with high risk for hip fractures - A cross-sectional study with QCT

In elderly subjects and in particular in those with osteoporosis the evidence on age related volume changes of the hip is still very limited. Even less is known about bone changes of the femoral head. The aim of this study is to explore associations of bone size of the femoral head and neck with age in postmenopausal women with very high risk of hip fracture and to investigate associations of femoral head and neck bone mineral density. MIAF (medical image analysis framework)-Femur was used for the analysis of CT datasets from 319 females with acute hip fractures age 50 to 98. Integral BMD and volume of the head and neck were assessed. The femoral head was divided into four quadrants to address differential vBMD and volume responses of its superior, inferior, posterior and anterior parts. Areal BMD (aBMD) of femoral neck was also obtained. In this population of postmenopausal women we did not observe age-related changes in bone volume of the femoral head or neck between ages 50 and 98 years. Integral vBMD in the head in the 90-98 year group was 48.0 mg/cm³ lower than that in 50-59 year group, which accounts for nearly 30% decrease in vBMD with 40 years increase. Age-related vBMD changes in the head quadrants were similar to that in total. With age, the trend line correlation coefficients for vBMD in quadrants were relatively small, but significant (p < 0.001) for all. The femoral head integral vBMD correlates well with neck vBMD and FN aBMD. FN aBMD explained 45% of head integral vBMD variance (p < 0.0001). Elderly women had relative preservation of femoral head and neck bone volume from 50 yrs. over four decades but markedly lower integral vBMD of proximal femur. The findings of our study call in question about the concept of bone expansion with aging even in elderly age.

A cross-sectional study on the age-related cortical and trabecular bone changes at the femoral head in elderly female hip fracture patients

Bone is in a continuous state of remodeling whereby old bone is absorbed and new bone is formed in its place. During this process, new formations reinforce the bone in the direction of the dominant stress trajectories through a functional adaptation. In normal aging, the balance between bone resorption and formation can be shifted. How this affects the functional adaptation remains to be investigated. Furthermore, how or whether the bone continues to change beyond the age of 85 is not yet studied in detail. In this study we examined the age-related changes in the cortical and trabecular bone in old age, and assessed whether we can find evidence of the presence of functional adaptation. We measured cortical and trabecular parameters from micro-computed tomography scans of the femoral head extracted from hip fracture patients between the age of 70 and 93 years. A significant decrease in global trabecular bone mineral density (38.1%) and cortical thickness (13.0%) was seen from the 9th to the 10th decade of life. The degree of anisotropy was maintained globally as well as locally in both high and low stress regions. The local trabecular bone mineral density decreased in both high stress and low stress regions between the 9th and 10th decade of life with similar trends. This suggests that the role of functional adaptation in maintaining the bone structural integrity in old age may be limited. This study highlights the need for a controlled clinical trial examining the cause of the continued bone degradation throughout old age.