Surgical Treatment of Meniscal Extrusion: A Biomechanical Study on the Role of the Medial Meniscotibial Ligaments With Early Clinical Validation

Centralization reduces meniscal extrusion, improves joint mechanics and functional outcomes in patients undergoing meniscus surgery: A systematic review and meta-analysis

PURPOSE

To perform a systematic review and meta-analysis of the existing literature on meniscal centralisation procedures, analysing its impact on meniscal extrusion, joint biomechanics and clinical and radiological outcome measures.

METHODS

The Cochrane Controlled Register of Trials, PubMed (MEDLINE) and Embase were used to perform a systematic review using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria. Biomechanical studies on healthy animal or human cadaveric knee joints that assessed meniscal extrusion or tibiofemoral contact mechanics (contact area and pressure) following centralization for meniscal pathologies were included. For clinical studies, those that prospectively or retrospectively assessed patient-reported outcome measures (PROMs), postoperative knee motion, complications and radiological extrusion following centralization for meniscal pathologies were included.

RESULTS

Fifteen studies were included in the analysis, comprising eight biomechanical, six clinical and one both. There were 92 knee specimens for biomechanical testing, of which 40 were human cadaveric and 52 porcine models. Biomechanical data revealed centralization to be commonly performed for posterior meniscal root tears and significantly reduced extrusion and contact pressure whilst improving contact area following a tear (p < 0.00001). Centralization restored extrusion to that of the native knee at all flexion angles described (0-90°, p = 0.25) and, compared to the torn state, brought tibiofemoral contact mechanics 3.2-5.0 times closer to the native state. Clinical data showed that 158 patients underwent centralization for extrusion. It improved postoperative Knee Injury and Osteoarthritis Outcome score (KOOS) (p = 0.006) and Lysholm scores (p < 0.00001) at 25.0 months, maintained extrusion reduction at 17.1 months (p < 0.00001) and preserved knee motion.

CONCLUSION

Centralisation for various meniscal injuries associated with extrusion can reduce meniscal extrusion and improve joint biomechanics, along with clinical and radiological outcomes. Existing evidence is still scarce and exhibits a notable amount of methodological heterogeneity.

LEVEL OF EVIDENCE

Systematic review of Level IV evidence.

Arthroscopic Repair of Extruded Meniscus Tears: Impact on Symptom Relief and Functional Improvement - A 2-Year Follow-Up Study

BACKGROUND This retrospective study from a single center in Turkey aimed to evaluate 2-year outcomes of 21 patients undergoing knee arthroscopic repair of extruded meniscus tears without root tear. MATERIAL AND METHODS The retrospective study comprised 21 individuals who underwent arthroscopic extruded meniscus repair and were followed up for at least 2 years. The study analyzed the meniscus extrusion amounts in preoperative and postoperative MRI scans, the Kellgren-Lawrence stages in knee radiographs, and the Lsyhom and The International Knee Documentation Committee (IKDC) scores of the included patients. RESULTS In this study, the repair operation extrusion levels were 3.30 mm from 4.01 mm preoperatively (P<0.001). After the repair, there was a significant increase in the Lsyhom and IKDC scores (P<0.001). According to the Kellgren-Lawrence scale, 12 patients were evaluated as stage 0, 6 patients as stage 1, and 3 patients as stage 2. According to the radiographs taken at the last follow-up, 2 patients progressed from stage 0 to stage 1, 2 patients progressed from stage 1 to stage 2, and 1 patient progressed from stage 2 to stage 3. CONCLUSIONS Arthroscopic treatment of extruded meniscus tears can enhance functional status and increase patients' functional status. Nevertheless, the absence of successful centralization extruded meniscus tears. This study discovered that radiological extrusion did not diminish beyond the critical threshold of 3 mm, which is associated with the development of osteoarthritis. This highlights the necessity of taking these elements into account when devising a treatment plan.

Effectiveness of capsulodesis in ganglion cysts caused by a medial meniscotibial ligament tear and medial meniscus extrusion

INTRODUCTION AND IMPORTANCE

Meniscotibial ligament (MTL) has received attention as a major meniscus stabilizer. An MTL injury results in instability and extrusion of the meniscus. Cases of knee ganglion cyst formation due to an MTL tear and medial meniscus extrusion (ME) are extremely rare.

CASE PRESENTATION

A 42-year-old female Japanese childcare worker presented painful ganglion cysts on the proximal medial side of her left tibia. An MTL tear and medial ME were thought to be involved in the ganglion formation. Joint fluid flowed through the meniscotibial side of the extruded meniscus into the space between the medial collateral ligament and tibia, where the MTL tear acted as a check valve, forming ganglion cysts. Ultrasonography-guided aspiration of the ganglion was attempted, but ganglion cysts recurred within 1 month. We used an open excision for the ganglion cysts, and arthroscopic capsulodesis was performed to repair the MTL and internalize the medial meniscus to block the inflow route from the intra-articular space.

CLINICAL DISCUSSION

We performed capsulodesis, which repaired the MTL and internalized the medial meniscus to prevent the recurrence of the ganglion cyst. Three months have passed since the surgery, with no recurrence of knee pain or ganglion cysts, indicating good short-term results.

CONCLUSIONS

We encountered a rare case of ganglion cyst formation in the knee joint due to MTL tear and medial ME. Arthroscopic MTL repair and internalization of the meniscus by capsulodesis were effective in treating the ganglion cysts.

The meniscotibial ligament does exist: An anatomic and histological description

Purpose

To describe the anatomical and histological characteristics of the human MTL (meniscotibial ligament) that keeps the meniscus stable and are rarely discussed.

Study design

Descriptive laboratory study.

Methods

In total, six fresh-frozen adult cadaver knees were dissected, and the dissection protocol were designed by two experienced anatomy professors. The anatomical morphology of MTL was observed. The main anatomical specimens included meniscus, tibial plateau, MTL. The osteotome was used to excise the portion of the tibial plateau, which could obtain the complex including partial meniscus, MTL, and a tibial fragment. A histopathologic study was performed by two experienced pathologists.

Results

Macroscopically, the MTL could be divided into two parts: medial meniscotibial ligament (MMTL)and lateral meniscotibial ligament (LMTL). The MMTL is distributed continuously, whereas the LMTL is discontinuous on the tibial plateau. The average length from the tibial attachment of the LMTL to the articular surface was 19 ± 1.0mm (mean ± SD). The average length from the tibial attachment of the MMTL to the articular surface was 10 ± 1.2 mm (mean ± SD). Microscopy of the MTL showed that the MTL is a ligamentous tissue, composed of a network of oriented collagenous fibers.

Conclusions

In all knees, the MTL was inserted on the outer edge of the meniscus, attaching to the tibia below the level of articular cartilage, which was key to maintaining the rotational stability of knee and the meniscus in the physiological position on the tibial plateau. Histological analysis of this ligament demonstrated that the MTL is a veritable ligamentous structure, which is made up of collagen type I-expressing fibroblasts.

Clinical relevance

This article contributes to the understanding of the anatomical and histological characteristics of the MTL. It is beneficial to promote the development of relevant surgical techniques for the MTL lesion.

Effect of Injury to the Lateral Meniscotibial Ligament and Meniscofibular Ligament on Meniscal Extrusion: Biomechanical Evaluation of the Capsulodesis and Centralization Techniques in a Porcine Knee Model

Background

Previous biomechanical studies of the meniscotibial ligament have determined that it contributes to meniscal stability. An injury to it can cause the meniscus to extrude, and reconstruction of that ligament significantly reduces extrusion.

Purpose

To assess the biomechanical effects of sectioning the lateral meniscotibial ligament (LMTL) and the meniscofibular ligament (MFL) with respect to the radial mobility of the lateral meniscus and to evaluate the biomechanical effects of the capsulodesis and centralization techniques.

Study Design

Controlled laboratory study.

Methods

The lateral meniscus of 22 porcine knees was evaluated. They were mounted on a testing apparatus to apply muscle and ground-reaction forces. The meniscus was evaluated at 30° and 60° of knee flexion using 2 markers placed on the posterior cruciate ligament and the lateral meniscus after applying an axial compression of 200 N to the knee joint. Measurements were recorded under 5 conditions: intact lateral meniscus, injury of the LMTL, subsequent injury of the MFL, the use of the open capsulodesis technique, and the reconstruction of the LMTL and the MFL with the centralization technique.

Results

The distance between the 2 markers was significantly greater in the extrusion group (combined lesion of the LMTL and MFL) than in the intact or reconstruction groups (capsulodesis and centralization techniques; P < .001 in all cases). In the cases of load application, no significant differences were observed between the control group (intact meniscus) and the groups on which the reconstruction techniques were performed. There were also no differences when comparing the results obtained between both reconstruction techniques. In all settings, the distance between the 2 markers increased with the increase in the knee flexion angle.

Conclusion

In a porcine model, the LMTL and the MFL participated as restrictors of the radial mobility of the lateral meniscus during loading. Their injury caused a significant increase in lateral meniscal extrusion, and the centralization and the capsulodesis procedures were able to reduce extrusion.

Clinical Relevance

This study demonstrates the capacity of the LMTL and the MFL to restrict the radial mobility of the lateral meniscus during loading and how it is affected when they are injured.

Meniscotibial Ligament Insufficiency Increases Force on the Posterior Medial Meniscus Root

BACKGROUND

Posterior medial meniscus root (PMMR) tears are a challenge to assess and treat. However, the forces sustained at the PMMR are yet to be fully characterized. In addition, it has been shown that meniscotibial ligament (MTL) injuries happen before PMMR tears, suggesting that insufficiency of the MTL results in a change of forces acting on the PMMR.

PURPOSE/HYPOTHESIS

The purpose of this study was to evaluate the 3-dimensional forces acting on the PMMR in the intact, MTL cut, and MTL tenodesis states. It was hypothesized that the MTL cut state would increase medial shear forces seen at the PMMR, whereas the medial shear force in the MTL tenodesis state would return PMMR forces to that of the intact state.

STUDY DESIGN

Controlled laboratory study.

METHODS

Ten fresh-frozen cadaveric knees were tested in 3 states (intact, MTL cut, and tenodesis). A 3-axis load cell was installed below the posterior tibial plateau and attached to the enthesis of the PMMR. The specimen was mounted to a load frame that applied an axial load, an internal torque, and an external torque. The amount of compression-tension, mediolateral shear force, and anteroposterior shear force acting on the PMMR was measured.

RESULTS

When the joint was loaded in compression, the MTL cut state significantly increased compression of the PMMR (P = .0368). The tenodesis state did not significantly restore forces of the PMMR (P = .008). When the joint was loaded in external torque, the MTL cut state significantly increased compression (P < .0001) and significantly decreased anterior shear on the PMMR (P = .0003). The tenodesis state did not significantly restore forces on the PMMR to the intact state (P < .0001). Increased flexion angle significantly increased medial shear forces of the PMMR when the joint was loaded in compression (P < .007 at every angle).

CONCLUSION

When evaluated biomechanically, MTL insufficiency resulted in increased compressive force at the PMMR. A single-anchor centralization procedure did not restore PMMR forces to that of the intact state. Increased knee flexion angle resulted in increased medial shear force on the PMMR.

CLINICAL RELEVANCE

The findings in this study provide clinicians information on PMMR forces when the MTL is disrupted. These data can aid in the decision-making for adding an MTL repair to augment PMMR repairs.

Relationship between medial meniscus extrusion and damage to medial stabilizers: Should extrusion be considered significant only when more than 3 mm?

BACKGROUND

This study was conducted with patients with anterior and medial extrusion of the medial meniscus (MM-AE, MM-ME) to investigate the relationship of the amount of extrusion with damage to the meniscus, meniscofemoral ligament (MFL), meniscotibial ligament (MTL), presence of effusion, osteoarthritis (OA) grade and other medial stablizers. A cut-off value for significant MM-ME was also suggested.

METHODS

All patients aged 18 and above who had measurable MM extrusion on knee MRI were included. Patients with acute injury detected on knee MRI and any disease that could disrupt the anatomy were not included. The relationship between the amount of MM-AE, MM-ME and the investigated comorbidities were evaluated. The patients were divided into two: those with and without positive findings for each comorbidities. The amount of MM-AE, MM-ME were evaluated. ROC analysis was undertaken for significant differences, and cut-off values were determined.

RESULTS

There was a correlation between MM-ME and age, weight, and BMI (p < 0.001, p = 0.027, p = 0.025, respectively). The amount of MM-ME was higher in the groups with OA (p = 0.007), MTL damage (p < 0.001), MFL damage (p < 0.001), meniscus damage (p < 0.001), effusion (p < 0.001), and the amount of MM-AE was higher in the groups with OA (p = 0.042), effusion (p = 0.002). The cut-off values of MM-ME were determined to be 2.69 mm (MTL), 2.65 mm (MFL), 2.49 mm (meniscus), and 2.85 mm (OA).

CONCLUSION

OA grade, effusion, and meniscus, MTL, and MFL damage were all found to be related to the amount of MM-ME. MM-ME values 2.49-2.85 mm may indicate meniscus, MFL, MTL damage and OA.

Biomechanical Analysis of Meniscotibial Ligament Tenodesis to Treat Meniscal Extrusion in the Setting of Posterior Medial Meniscus Root Repair

BACKGROUND

Meniscal extrusion often persists after a medial meniscus root repair. If the meniscus is extruded, the function of the meniscus as a load-sharing device and secondary knee stabilizer is compromised.

HYPOTHESIS

It was hypothesized that repairing the meniscotibial ligament (MTL) would decrease meniscal extrusion in the settings of both an isolated MTL tear and a repaired medial meniscus root while also improving medial compartment contact mechanics.

STUDY DESIGN

Controlled laboratory study.

METHODS

Ten fresh-frozen cadaveric knees (mean age, 50.5 years) were tested in 5 conditions: intact, MTL deficiency, MTL deficiency + posterior medial meniscus root deficiency, MTL deficiency + posterior medial meniscus root repair, and MTL tenodesis + posterior medial meniscus root repair. Specimens were mounted to a load frame that applied a 1000-N axial load. Joint contact pressures were measured using thin pressure sensors, and the peak and mean pressures were analyzed. Ultrasound was used to measure meniscal extrusion.

RESULTS

The MTL tear in isolation resulted in significant meniscal extrusion compared with the intact state (P = 0.035) without a detectable difference in medial compartment pressures. The addition of a root tear to the MTL tear state resulted in significantly more extrusion (P = 0.001) and significant increases in medial compartment pressure (P = .030) compared to the MTL tear state. Root repair alone restored extrusion, mean contact pressure, and peak contact pressure back to the intact state (P > .05).

CONCLUSION

This study showed that MTL disruption led to increased meniscal extrusion in a cadaveric model. Unlike the root tear state, MTL disruption did not change contact mechanics. Furthermore, root repair alone was sufficient in restoring intact biomechanics and extrusion.

CLINICAL RELEVANCE

This study may help clinicians understand the origin of medial meniscus root tears and aid in the decision-making process for whether to add an MTL tenodesis in the setting of root repair.

The meniscotibial ligament role in meniscal extrusion: a systematic review and meta-analysis

INTRODUCTION

The meniscotibial ligament (MTL) limits extrusion of the medial meniscus (MM). While meniscal extrusion may be detrimental to knee joint biomechanics, the role of the MTL in meniscal extrusion is debatable. We sought to perform a systematic review and meta-analysis to evaluate the role of the MTL and surgical techniques for MTL repair.

MATERIALS AND METHODS

Following Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines we searched PubMed, Cochrane Library, and Embase for: (("Meniscotibial") OR ("Coronary") OR ("Ramp")) AND ("Extrusion"). After screening and applying eligibility criteria, data were extracted for MTL pathology types ("traumatic" ruptures or "induced" injuries) and meniscal extrusion. A meta-analysis evaluated the mean difference of extrusion between "intact" MTLs (native or repaired) and "injured" MTLs (induced or traumatic). We further performed a subgroup analysis between traumatic and induced MTL lesions.

RESULTS

This systematic review included six studies, which all evaluated MM extrusion. There were 74 knees with induced MTL injuries and 19 knees with traumatic MTL ruptures. Study designs were heterogenic and utilized three types of MTL repair procedures. The meta-analysis included 18 human knees and revealed that sectioning the MTL created a 2.92 mm [- 0.18 to 6.03] MM extrusion, while MTL repair decreased MM extrusion by - 2.11 mm [- 3.03 to - 1.21].

CONCLUSIONS

MTL injury may result in approximately 3 mm of MM extrusion, while repair of the MTL can decrease extrusion by 2 mm. Several novel surgical techniques exist to repair the MTL. However, studies reporting clinical outcomes of these various procedures are scarce.

Biomechanical Analysis Evaluating Meniscal Extrusion After Knotless Suture Anchor Fixation for Segmental Medial Meniscal Allograft Transplantation

Background

Segmental medial meniscal allograft transplantation (MAT) has been shown to restore knee biomechanics; however, stable fixation of the transplantation is critical to avoid extrusion and maximize healing.

Purpose

To evaluate the degree of meniscal extrusion and biomechanical function of segmental medial MAT performed with meniscocapsular sutures versus repair augmentation with knotless suture anchors.

Study Design

Controlled laboratory study.

Methods

Segmental midbody medial meniscectomy and subsequent segmental medial MAT were performed on 10 fresh-frozen cadaveric knees. The knees were then loaded in a dynamic tensile testing machine to 1000 N for 60 seconds at 0°, 30°, 60°, and 90° of flexion, and 4 conditions were tested: (1) intact, (2) segmental defect, (3) inside-out segmental repair, and (4) anchor plus inside-out segmental repair of the medial MAT. Meniscal extrusion was measured using high-fidelity ultrasound imaging. The mean contact area and the mean and peak contact pressures were assessed with submeniscal pressure-mapping sensors. Data from testing conditions were compared with 2-way repeated-measures analysis of variance, with pairwise comparison using the Bonferroni method.

Results

At 90° of flexion, the segmental defect state showed a higher degree of meniscal extrusion compared with all other states (P ≤ .012). There was no difference in the degree of meniscal extrusion between the intact state and the inside-out repair or anchor plus inside-out segmental repair states at all knee flexion angles (P > .05). There was no significant difference in the mean and peak contact pressures among the 4 states at all flexion angles except that at 0° of knee flexion there was significantly lower peak contact pressure at the medial compartment after anchor plus inside-out segmental repair compared with the segmental defect state (P = .048).

Conclusion

Meniscal extrusion was not significantly increased at any flexion angle after segmental resection. The addition of knotless anchors did not improve meniscal extrusion or contact pressures/area compared with capsular repair alone. The addition of knotless anchors did improve contact mechanics from the segmental defect state, but only at 0° of flexion.

Clinical Relevance

The addition of knotless suture anchors to segmental meniscal transplantation increased stabilization of the meniscus at full extension compared with repair with sutures alone. This increased stabilization may lead to better long-term outcomes.

Meniscal extrusion: risk factors and diagnostic tools to predict early osteoarthritis

Meniscal extrusion (ME) is strongly correlated with cartilage wear and osteoarthritis (OA), be-cause of the altered kinematic and the decreased contact area between the tibia and femur. The aim of this narrative review is to analyze the process of ME, focusing on the possible causes, and to evaluate the correlation between ME and knee OA, in order to provide early diagnosis and treatments. Studies written in English that analyzed the causes of ME, provided indications re-garding diagnosis and treatment, and evaluated the relation between ME and early OA were in-cluded. Injuries, degeneration of the meniscal substance and meniscus root tears are associated with significantly increased ME. An extruded meniscus could be a manifestation of other pa-thologies such as disruption of coronary ligaments, cartilage loss, knee malalignment, ligament injuries, or OA. ME is strongly associated with osteoarthritis features, particularly with bone marrow lesion and cartilage damage. Magnetic resonance imaging represents the gold standard for the detection of ME. The severity of the medial meniscus extrusion may also affect healing af-ter repair, and meniscus extrusion is not completely reduced by meniscus posterior root tear re-pair. In this study, we proved that ME represents an important risk factor for early knee OA. We provided alternative theories of ME, such as meniscal fibers injury first and "dynamic extrusion of the menisci". The phenomenon of aging has been described as a new concept in the etiology of ME. Finally, we stated all the main techniques and characteristics of the diagnostic process, as well as the current knowledge in the therapeutic field.

Study of the nerve endings and mechanoreceptors of the medial meniscotibial ligament of the knee: A structural and distribution analysis

BACKGROUND

The aim of the present study is to describe the morphology and distribution of the nerve endings of the meniscotibial ligament (MTL) of the knee, in order to understand the interaction between the proprioceptive system and knee mechanics.

METHODS

Twenty medial MTLs were obtained from deceased organ donors. The ligaments were measured, weighed and cut. Sections (10 mm) were prepared on hematoxylin and eosin-stained slides for analysis of tissue integrity, and 50 mm sections were submitted to immunofluorescence with the protein gene product (PGP) 9.5 as primary antibody and Alexa Fluor 488 as secondary antibody, followed by microscopic analysis.

RESULTS

The medial MTL was identified in 100% of the dissections, with average length, width, thickness and weight of 7.07 ± 1.34 mm, 32.25 ± 3.09 mm, 3.53 ± 0.27 mm and 0.67 ± 0.13 g, respectively. The hematoxylin and eosin-stained histological sections exhibited typical ligament structure, with dense well-organized collagen fibers and vascular tissue. All the specimens analyzed contained type I (Ruffini) mechanoreceptors and free (type IV) nerve endings, varying from parallel to intertwined fibers. Nerve endings not classified with different irregular shapes were also found. Most type I mechanoreceptors were found close to the MTL insertions on the tibial plateau, while the free nerve endings were found adjacent to the capsule.

CONCLUSION

The medial MTL showed a peripheral nerve structure, primarily type I and IV mechanoreceptors. These findings suggest that the medial MTL is important for proprioception and medial knee stabilization.

Quantifying Meniscal Extrusion Using Ultrasound in the Setting of Concomitant Cadaveric Knee Lesions: Part I: The Medial Meniscotibial Ligament and Posterior Medial Meniscal Root

PURPOSE

1. Evaluate how the meniscotibial ligament (MTL) affects meniscal extrusion (ME) +/- concomitant posterior medial meniscal root (PMMR) tears. 2. Describe how ME varied along length of meniscus.

METHODS

ME was measured using ultrasonography in 10 human cadaveric knees in conditions: (1) control, either (2a) isolated MTL sectioning, or (2b) isolated PMMR tear, (3) combined PMMR + MTL sectioning, and (4) PMMR repair. Measurements were obtained 1 cm anterior to the MCL (anterior), over the MCL (middle), and 1 cm posterior to the MCL (posterior) +/- 1000N axial loads in 0° and 30° flexion.

RESULTS

At 0°, MTL sectioning demonstrated greater middle than anterior (P<0.001) and posterior (P<0.001) ME, while PMMR (P=0.0042) and PMMR+MTL (P<0.001) sectioning demonstrated greater posterior than anterior ME. At 30°, PMMR (P<0.001) and PMMR+MTL (P<0.001) sectioning demonstrated greater posterior than anterior ME, and PMMR (P=0.0012) and PMMR+MTL (P=0.0058) sectioning demonstrated greater posterior than anterior ME. PMMR+MTL sectioning demonstrated greater posterior ME at 30° compared to 0° (P=0.0320). MTL sectioning always resulted in greater middle ME (P<0.001), in contrast with no middle ME changes following PMMR sectioning. At 0°, PMMR sectioning resulted in greater posterior ME (P<0.001), but at 30°, both PMMR and MTL sectioning resulted in greater posterior ME (P<0.001). Total ME surpassed 3 mm only when both the MTL and PMMR were sectioned.

CONCLUSION

The MTL and PMMR contribute most to ME when measured posterior to the MCL at 30° of flexion. ME greater than 3 mm is suggestive of combined PMMR + MTL lesions.

CLINICAL RELEVANCE

Overlooked MTL pathology may contribute to persistent ME following PMMR repair. We found isolated MTL tears able to cause 2-2.99 mm of ME, but the clinical significance of these magnitudes of extrusion is unclear. The use of ME measurement guidelines with ultrasound may allow for practical MTL and PMMR pathology screening and pre-operative planning.

Isolated Posterior Lateral Meniscofemoral Ligament Tears Show Greater Meniscal Extrusion in Knee Extension, and Isolated Posterior Lateral Meniscal Root Tears Show Greater Meniscal Extrusion at 30° Using Ultrasound: A Cadaveric Study

PURPOSE

To quantify the effects that posterior meniscofemoral ligament (pMFL) lesions have on lateral meniscal extrusion (ME) both with and without concomitant posterior lateral meniscal root (PLMR) tears and describe how lateral ME varied along the length of the lateral meniscus.

METHODS

Ultrasonography was used to measure ME of human cadaveric knees (n = 10) under the following conditions: control, isolated pMFL sectioning, isolated PLMR sectioning, pMFL+PLMR sectioning, and PLMR repair. ME was measured anterior to the fibular collateral ligament (FCL), at the FCL, and posterior to the FCL in both unloaded and axially loaded states at 0° and 30° of flexion.

RESULTS

Isolated and combined pMFL and PLMR sectioning consistently demonstrated significantly greater ME when measured posterior to the FCL compared with other image locations. Isolated pMFL tears demonstrated greater ME at 0° compared with 30° of flexion (P < .05), whereas isolated PLMR tears demonstrated greater ME at 30° compared with 0° of flexion (P < .001). All specimens with isolated PLMR deficiencies demonstrated greater than 2 mm of ME at 30° flexion, whereas only 20% of specimens did so at 0°. When the pMFL was sectioned following an isolated PLMR tear, there was a significant increase in ME at 0° (P < .001). PLMR repair after combined sectioning restored ME to levels similar to that of controls in all specimens when measured at and posterior to the FCL (P < .001).

CONCLUSIONS

The pMFL protects against ME primarily in full extension, whereas the presence of ME in the setting of PLMR injuries may be better appreciated in knee flexion. With combined tears, isolated repair of the PLMR can restore near-native meniscus position.

CLINICAL RELEVANCE

The stabilizing properties of intact pMFL may mask the presentation of PLMR tears and delay appropriate management. Additionally, the MFL is not routinely assessed during arthroscopy due to difficult visualization and access. Understanding the ME pattern of these pathologies in isolation and combination may improve detection rates so that the source of patients' symptoms can be addressed to satisfaction.

Cumulative knee adduction moment during jogging causes temporary medial meniscus extrusion in healthy volunteers

PURPOSE

The cumulative knee adduction moment (KAM) is a key parameter evaluated for the prevention of overload knee injuries on the medial compartment. Medial meniscus extrusion (MME), typical in hoop dysfunctions, is a measure for the cumulative mechanical stress in individual knees; however, its correlation with cumulative KAM is unknown. The aim of this study was to investigate the effect of temporary overload stress on MME and its correlation with cumulative KAM.

METHODS

Thirteen healthy asymptomatic volunteers (13 knees) were recruited for a cohort study (mean age, 23.1 ± 3.3 years; males: n = 8). The cumulative KAM was calculated using a three-dimensional motion analysis system, in addition to the number of steps taken while jogging uphill or downhill. MME was evaluated using ultrasound performed in the standing position. The evaluations were performed four times: at baseline (T0), before and after (T1 and T2, respectively) jogging uphill or downhill, and 1 day after (T3) jogging. Additionally, the Δ-value was calculated using the change of meniscus after efforts as the difference in MME between T1 and T2.

RESULTS

The MME in T2 was significantly greater than those in T0 and T1. Conversely, the MME in T3 was significantly lesser than that in T2. No significant difference was found between those in T0 and T1, and T3. ΔMME exhibited a significant positive correlation with the cumulative KAM (r = 0.68, p = 0.01), but not for peak KAM.

CONCLUSION

The temporary reaction of MME observed in ultrasound correlates with the cumulative stress of KAM.

Concomitant Meniscotibial Ligament Reconstruction Decreases Meniscal Extrusion Following Medial Meniscus Allograft Transplantation: A Cadaveric Analysis

PURPOSE

To compare meniscal extrusion (ME) following medial meniscus allograft transplantation (MMAT) with and without meniscotibial ligament reconstruction (MTLR).

METHODS

Ten cadaveric knees were size-matched with meniscus allografts. MMAT was performed via bridge-in-slot technique. Specimens were mounted in a testing system and ME was assessed via ultrasound anterior, directly over, and posterior to the medial collateral ligament at the joint line under 4 testing conditions: (1) 0° flexion and 0 newtons (N) of axial load, (2) 0° and 1,000 N, (3) 30° and 0 N, and (4) 30° and 1,000 N. For each condition, "mean total extrusion" was calculated by averaging measurements at each position. Next, MTLR was performed using 2 inside-out sutures through the remnant allograft meniscotibial ligament and secured to the tibia using anchors. The testing protocol was repeated. Differences in ME between MMAT alone versus MMAT + MTLR were examined. Within-group differences between the measurement positions, loading states, and flexion angles also were assessed.

RESULTS

"Mean total extrusion" was greater following MMAT alone (2.56 ± 1.23 mm) versus MMAT + MTLR (2.14 ± 1.07 mm; P = .005) in the loaded state at 0° flexion. ME directly over the MCL was greater following MMAT alone (3.51 ± 1.00 mm) compared with MMAT + MTLR (2.93 ± 0.79 mm; P = .054). Posteriorly, in the loaded state at 0°, ME was greater following MMAT alone (2.43 ± 1.10 mm) compared with MMAT + MTLR (1.96 ± 0.99 mm; P = .010). In all conditions, ME was greater in the loaded state versus the unloaded state.

CONCLUSIONS

Following MMAT, the addition of MTLR significantly reduced overall ME when compared with isolated MMAT during loading at 0° of flexion in a cadaveric model; given the small absolute values of change in extrusion, clinical significance cannot be gleaned from these findings.

CLINICAL RELEVANCE

During medial meniscus allograft transplantation, augmentation with meniscotibial ligament reconstruction may limit meniscal extrusion and improve the biomechanical milieu of the knee joint following transplant.

Clinical significance and management of meniscal extrusion in different knee pathologies: a comprehensive review of the literature and treatment algorithm

The menisci are crescent-shaped, fibrocartilaginous structures that play a crucial role in the load transition and distribution of the contact forces along the tibiofemoral articulation. Meniscal extrusion (ME) is a radiological finding, especially in magnetic resonance imaging (MRI) scans, for which there has been growing interest in recent years. ME, in the coronary plane, is defined as the maximum distance of the most distal end of the meniscus from the border of the tibial plateau, where the tibial eminences are the most prominent, without taking into account the osteophytes. Although there is still controversy in the literature in respect of the optimal cutoff value, a threshold of 3 mm is considered significant. ME has no specific clinical finding or sign and it is encountered in many knee pathologies. It is associated with either rapidly progressive knee osteoarthritis or early onset of knee osteoarthritis and increased morbidity. In this review, we delineate the clinical significance of ME in various knee pathologies, as well as when, why and how it should be managed. To the best of our knowledge, this is the first study to elaborate on these topics.

Meniscal Extrusion: A Critical Analysis Review

➢

Pathologic meniscal extrusion can compromise meniscal function, leading to increased contact forces in the tibiofemoral compartment and the acceleration of osteoarthritic changes.

➢

Extrusion is typically defined as radial displacement of ≥3 mm outside the tibial border and is best diagnosed via magnetic resonance imaging, although ultrasonography has also demonstrated encouraging diagnostic utility.

➢

Surgical management of meniscal extrusion is based on the underlying etiology, the patient's symptom profile, the preexisting health of the articular surface, and the risk of future chondral injury and osteoarthritis.

Isolated Meniscotibial Ligament Rupture: The Medial Meniscus "Belt Lesion"

Ramp lesions play a major role in both anteroposterior and rotational instability following anterior cruciate ligament rupture. The meniscotibial ligament (MTL) is the most important structure to repair and is the primary stabilizer of the posterior horn of the medial meniscus. The posteroinferior insertion of the MTL on the posterior horn of the medial has been described, forming a posterior "belt." Isolated MTL lesion diagnosis can be challenging, as the absence of a meniscocapsular ligament lesion prevents its correct visualization through transnotch vision. This article details a technique to diagnose and repair the "belt lesion" of the medial meniscus.

Meniscal Extrusion: A Narrative Review

Background:

Meniscal extrusion, referred to as an external displacement of the meniscus, is a commonly encountered but often overlooked magnetic resonance imaging finding in the knee joint. Meniscal extrusion alters the biomechanical properties of the meniscus, leading to accelerated cartilage degeneration and early osteoarthritic changes. The literature contains discrepancies about meniscal extrusion on topics ranging from definition to diagnosis. This narrative review outlines the pathogenesis, natural history, diagnosis, and treatment of meniscal extrusion.

Purpose:

To review the current literature on meniscal extrusion, from pathogenesis to treatment, and to provide recommendations for future research.

Study Design:

Narrative review.

Methods:

A computer-based search of the PubMed, Ovid Medline, and Cochrane Library databases was used to perform a comprehensive literature review on meniscal extrusion. A total of 81 studies was ultimately included in the review.

Results:

The literature review highlighted the current ambiguity in definition, difficulty in clinical diagnosis, and low level of awareness of this condition. This review covers all aspects related to meniscal extrusion and identifies many of its lesser known aspects.

Conclusion:

In the current literature, meniscal extrusion remains a lesser known albeit common condition because of its relatively silent nature along with lack of knowledge among orthopaedic surgeons. Further studies are warranted to provide better understanding and management of this condition.

Medial meniscal extrusion greater than 4 mm reduces medial tibiofemoral compartment contact area: a biomechanical analysis of tibiofemoral contact area and pressures with varying amounts of meniscal extrusion

PURPOSE

The primary objective of this study is to evaluate the contact areas, contact pressures, and peak pressures in the medial compartment of the knee in six sequential testing conditions. The secondary objective is to establish how much the medial meniscus is able to extrude, secondary to soft tissue injury while keeping its roots intact.

METHODS

Ten cadaveric knees were dissected and tested in six conditions: (1) intact meniscus, (2) 2 mm extrusion, (3) 3 mm extrusion, (4) 4 mm extrusion, (5) maximum extrusion, (6) capsular based meniscal repair. Knees were loaded with a 1000-N axial compressive force at 0°, 30°, 60°, and 90° for each condition. Medial compartment contact area, average contact pressure, and peak contact pressure data were recorded.

RESULTS

When compared to the intact state, there was no statistically significant difference in medial compartment contact area at 2 mm of extrusion or 3 mm of extrusion (n.s.). There was a statistically significant decrease in contact area compared to the intact state at 4 mm (p = 0.015) and maximum extrusion (p < 0.001). The repair state was able to improve medial compartment contact area, and there was no statistically significant difference between the repair and the intact states (n.s.). No significant differences were found in the average contact pressure between the repair, intact, or maximum extrusion conditions at any flexion angle (n.s.). No significant differences were found in the peak contact pressure between the repair, intact, or maximum extrusion conditions at any flexion angle (n.s.).

CONCLUSION

In this in vitro model, medial meniscus extrusion greater than 4 mm reduced medial compartment contact area, but meniscal extrusion did not significantly increase pressure in the medial compartment. Additionally, meniscal centralization was effective in restoring the medial tibiofemoral contact area to intact state when the meniscal extrusion was secondary to meniscotibial ligament injury. The diagnosis of meniscal extrusion may not necessarily involve meniscal root injury. Since it is known that meniscal extrusion greater than 3 or 4 mm has a biomechanical impact on tibiofemoral compartment contact area and pressures, specific treatments can be established. Centralization restored medial compartment contact area to the intact state.

Arthroscopic Centralization Using Knotless Anchors for Extruded Medial Meniscus

The load-distributing function is most critical in meniscal function, and meniscal extrusion suggests failure of this function, leading to the progression of osteoarthritis. The arthroscopic centralization technique has been developed to reduce meniscal extrusion; however, existing arthroscopic techniques sometimes fail to reduce the most extruded region, especially in cases with a medial meniscus (MM) posterior root tear, in which the most extruded region is on the posterior border of the medial collateral ligament, which is very difficult to approach. This Technical Note describes an arthroscopic technique for extrusion of the MM in which a centralization technique using knotless anchors efficiently reduces the MM extrusion at the posteromedial part and consequently restores the MM function. This technique efficiently reduces MM extrusion and restores its function, thus preventing the progression of osteoarthritis.