Estimating Hearing Thresholds From Stimulus-Frequency Otoacoustic Emissions

Joint Profile Characteristics of Long-Latency Transient Evoked and Distortion Otoacoustic Emissions

PURPOSE

In clinical practice, otoacoustic emissions (OAEs) are interpreted as either "present" or "absent." However, OAEs have the potential to inform about etiology and severity of hearing loss if analyzed in other dimensions. A proposed method uses the nonlinear component of the distortion product OAEs together with stimulus frequency OAEs to construct a joint reflection-distortion profile. The objective of the current study is to determine if joint reflection-distortion profiles can be created using long-latency (LL) components of transient evoked OAEs (TEOAEs) as the reflection-type emission.

METHOD

LL TEOAEs and the nonlinear distortion OAEs were measured from adult ears. Individual input-output (I/O) functions were created, and OAE level was normalized by dividing by the stimulus level yielding individual gain functions. Peak strength, compression threshold, and OAE level at compression threshold were derived from individual gain functions to create joint reflection-distortion profiles.

RESULTS

TEOAEs with a poststimulus window starting at 6 ms had I/O functions with compression characteristics similar to LL TEOAE components. The model fit the LL gain functions, which had R ² > .93, significantly better than the nonlinear distortion OAE gain functions, which had R ² = .596-.99. Interquartile ranges for joint reflection-distortion profiles were larger for compression threshold and OAE level at compression threshold but smaller for peak strength than those previously published.

CONCLUSIONS

The gain function fits LL TEOAEs well. Joint reflection-distortion profiles are a promising method that could enhance diagnosis of hearing loss, and use of the LL TEOAE in the profile for peak strength may be important because of narrow interquartile ranges.

SUPPLEMENTAL MATERIAL

https://doi.org/10.23641/asha.20323593.

Objective Assessment System for Hearing Prediction Based on Stimulus-Frequency Otoacoustic Emissions

Stimulus-frequency otoacoustic emissions (SFOAEs) can be useful tools for assessing cochlear function noninvasively. However, there is a lack of reports describing their utility in predicting hearing capabilities. Data for model training were collected from 245 and 839 ears with normal hearing and sensorineural hearing loss, respectively. Based on SFOAEs, this study developed an objective assessment system consisting of three mutually independent modules, with the routine test module and the fast test module used for threshold prediction and the hearing screening module for identifying hearing loss. Results evaluated via cross-validation show that the routine test module and the fast test module predict hearing thresholds with similar performance from 0.5 to 8 kHz, with mean absolute errors of 7.06–11.61 dB for the routine module and of 7.40–12.60 dB for the fast module. However, the fast module involves less test time than is needed in the routine module. The hearing screening module identifies hearing status with a large area under the receiver operating characteristic curve (0.912–0.985), high accuracy (88.4–95.9%), and low false negative rate (2.9–7.0%) at 0.5–8 kHz. The three modules are further validated on unknown data, and the results are similar to those obtained through cross-validation, indicating these modules can be well generalized to new data. Both the routine module and fast module are potential tools for predicting hearing thresholds. However, their prediction performance in ears with hearing loss requires further improvement to facilitate their clinical utility. The hearing screening module shows promise as a clinical tool for identifying hearing loss.