Al and Zr Porous Clay Heterostructures as Removal Agents of Basic Blue-41 Dye from an Artificially Polluted Solution: Regeneration Properties and Batch Design

The removal of Basic Blue-41 dye molecules was carried out by using two doped porous clay heterostructures by aluminum (Al) or zirconium (Zr) species. The proposed method of synthesis showed its efficiency, starting from Al or Zr intercalated hydrolyzed species, prior to its reaction with dodecylamine (C12 amine) and tetraethyl orthosilicate (TEOS) as a silica source. The intercalated precursors and their porous clay heterostructures (PCH) derivatives were characterized by different techniques. Solid NMR technique proved the presence of Al species into the intercalated silica between the clay sheets, and in addition to Si in different environments within the PCH materials. The Zr-PCH material exhibited a higher surface area and pore volume compared to its Al-PCH counterpart, with a mesoporous character for both materials. A maximum removed amount of 279 and 332 mg/g was achieved and deduced from the Langmuir equation. The regeneration tests revealed that the removal efficiency of Zr-PCH was retained after five regeneration runs, with a loss of 15% of the original value; meanwhile, the Al-PCH lost 45% of its efficiency after only three cycles. A single-stage batch design was proposed based on the Langmuir isotherm parameters. The increase of the removal capacity of Zr-PCH led to the reduction of the required amounts for the target removal of BB-41 dye compared to Al-PCH.

Interactions between C.I. Basic Blue 41 and aluminosilicate sorbents

Four aluminosilicate sorbents (montmorillonite, bentonite, raw perlite, and expanded perlite) were employed for retention of the cationic dye C.I. Basic Blue 41. Interactions between the clay and the dyestuff were investigated at several temperatures and clay:dye ratios. The mechanism behind the adsorption involves the formation of H-aggregates of the dye on both clays, followed by dye migration into the interlayer in the case of montmorillonite. Time-dependent absorbance spectra revealed the presence of various dye species in montmorillonite. Introduction of the dye molecules into the interlamellar space occurs more rapidly in bentonite than in montmorillonite. The dye molecules inserted between the clay leaves adopt different orientations and, eventually, stack in layers at increased dye loadings for both montmorillonite and bentonite. Higher dye aggregates are then present as suggested by diffuse reflectance spectroscopy. Dye sorption on both raw and expanded perlite proceeds via H-aggregate formation as well.

Basic blue 54: a new colorant for monocytes

C.I. basic blue 54, a sulfur containing azo textile dye, stained the nucleus and cytoplasm of normal and leukemic monocytes bright red-violet. Essential for the staining reaction was a brief final rinse in a pH 3.6 acetic acid-sodium acetate buffer. Coloration of the type found in monocytes was not observed in other types of mature and immature leukocytes.

New stains for blood and bone marrow cells

Traditionally, blood and bone marrow cells have been identified based on their characteristic shapes and colors when stained with one of several panoptic stains including Wright's or Giemsa's. As questions arose regarding the origin of normal and leukemic cells, cytochemical stains were developed. These stains help identify cells on the basis of a distinctive metabolite or enzyme. As part of an ongoing tradition in which textile dyes are used for biological staining, several new stains have been applied to hematologic staining. These include C.I. basic blue 41, basic blue 141, basic blue 93, and an asymmetrical polymethine dye. As additional cell-selective stains are developed, we can anticipate further improvements in our ability to identify normal and malignant hematopoietic cells.