Synthetic xylan-binding modules for mapping of pulp fibres and wood sections

Binding affinity of family 4 carbohydrate binding module on cellulose films of nanocrystals and nanofibrils

The binding affinity and thermodynamics of family 4 carbohydrate-binding module (CBM4), belonging to type B CBM, on model surfaces of cellulose nanocrystals (CNC) and nanofibrils (CNF) were investigated by quartz crystal microbalance with dissipation monitoring (QCM-D) technology in real-time at different temperatures. The thermodynamic parameters associated with the interaction, such as Gibbs free energy, enthalpy change, entropy change and heat capacity were obtained using the van't Hoff analysis via a nonlinear parameter estimation. The results demonstrated CBM4 binds preferentially to both CNF and CNC, whereas the driving forces behind them were very different. The former was related to the hydrogen bonds formed in the CBM4 clefts, resulting in a favorable enthalpy but compensated by unfavorable entropy change; on the contrary, the latter was mainly driven by favorable entropy but compensated by unfavorable enthalpic change due to water rearrangement.

Visualizing cellulase adsorption and quantitatively determining cellulose accessibility with an updated fungal cellulose-binding module-based fluorescent probe protein

BACKGROUND

Cellulose accessibility to cellulases (CAC) is a direct factor determining the enzymatic digestibility of lignocellulosic cellulose. Improving CAC by pretreatment is a prerequisite step for the efficient release of fermentable sugars from biomass cell wall. However, conventional methods to study the porosimetry of solid materials showed some limitations to be used for investigating CAC. In this work, an updated novel fusion protein comprising a fungal cellulose-binding module (CBM) from Cel7A cellobiohydrolase I (CBH I) of Trichoderma reesei QM6 and a di-green fluorescent protein (GFP₂) was constructed for quantitative determination of CAC.

RESULTS

The obtained probe protein had similar molecular size (e.g., weight) with that of Cel7A and could give detectable signal for quantitative analysis. Several construction strategies were compared with regard to the site of His-tag and order of CBM and GFP₂ modules in the protein sequence, in order to achieve good expression quantity and usability of the probe protein. His6-CBM-GFP₂ has been identified as the best probe protein for investigating the effects of structural features of cellulosic substrates on cellulose accessibility. Substrate samples with different contents of xylan, lignin, and degree of substitution of cellulose -OH by formyl group were obtained, respectively, by mild H₂SO₄ pre-hydrolysis, NaClO₂ selective delignification, and treatment of filter paper cellulose with concentrated formic acid. The determined CAC was in a wide range of 0.6-20.4 m²/g depending on the contents of hemicelluloses, lignin, and formyl group as well as cellulose degree of crystallization.

CONCLUSIONS

The obtained fusion probe protein could be used as a versatile tool to quantitatively investigate the impacts of biomass structural features on CAC and hydrolyzability of cellulose substrates, as well as nonproductive adsorption of cellulase enzymes on lignin.

Bioinspired assemblies of plant cell wall polymers unravel the affinity properties of carbohydrate-binding modules

Lignocellulose-acting enzymes play a central role in the biorefinery of plant biomass to make fuels, chemicals and materials. These enzymes are often appended to carbohydrate binding modules (CBMs) that promote substrate targeting. When used in plant materials, which are complex assemblies of polymers, the binding properties of CBMs can be difficult to understand and predict, thus limiting the efficiency of enzymes. In order to gain more information on the binding properties of CBMs, some bioinspired model assemblies that contain some of the polymers and covalent interactions found in the plant cell walls have been designed. The mobility of three engineered CBMs has been investigated by FRAP in these assemblies, while varying the parameters related to the polymer concentration, the physical state of assemblies and the oligomerization state of CBMs. The features controlling the mobility of the CBMs in the assemblies have been quantified and hierarchized. We demonstrate that the parameters can have additional or opposite effects on mobility, depending on the CBM tested. We also find evidence of a relationship between the mobility of CBMs and their binding strength. Overall, bioinspired assemblies are able to reveal the unique features of affinity of CBMs. In particular, the results show that oligomerization of CBMs and the presence of ferulic acid motifs in the assemblies play an important role in the binding affinity of CBMs. Thus we propose that these features should be finely tuned when CBMs are used in plant cell walls to optimise bioprocesses.

Crystallization, neutron data collection, initial structure refinement and analysis of a xyloglucan heptamer bound to an engineered carbohydrate-binding module from xylanase

Carbohydrate-binding modules (CBMs) are discrete parts of carbohydrate-hydrolyzing enzymes that bind specific types of carbohydrates. Ultra high-resolution X-ray crystallographic studies of CBMs have helped to decipher the basis for specificity in carbohydrate-protein interactions. However, additional studies are needed to better understand which structural determinants confer which carbohydrate-binding properties. To address these issues, neutron crystallographic studies were initiated on one experimentally engineered CBM derived from a xylanase, X-2 L110F, a protein that is able to bind several different plant carbohydrates such as xylan, β-glucan and xyloglucan. This protein evolved from a CBM present in xylanase Xyn10A of Rhodothermus marinus. The protein was complexed with a branched xyloglucan heptasaccharide. Large single crystals of hydrogenous protein (∼1.6 mm(3)) were grown at room temperature and subjected to H/D exchange. Both neutron and X-ray diffraction data sets were collected to 1.6 Å resolution. Joint neutron and X-ray refinement using phenix.refine showed significant density for residues involved in carbohydrate binding and revealed the details of a hydrogen-bonded water network around the binding site. This is the first report of a neutron structure of a CBM and will add to the understanding of protein-carbohydrate binding interactions.

Recombinant CBM-fusion technology - Applications overview

Carbohydrate-binding modules (CBMs) are small components of several enzymes, which present an independent fold and function, and specific carbohydrate-binding activity. Their major function is to bind the enzyme to the substrate enhancing its catalytic activity, especially in the case of insoluble substrates. The immense diversity of CBMs, together with their unique properties, has long raised their attention for many biotechnological applications. Recombinant DNA technology has been used for cloning and characterizing new CBMs. In addition, it has been employed to improve the purity and availability of many CBMs, but mainly, to construct bi-functional CBM-fused proteins for specific applications. This review presents a comprehensive summary of the uses of CBMs recombinantly produced from heterologous organisms, or by the original host, along with the latest advances. Emphasis is given particularly to the applications of recombinant CBM-fusions in: (a) modification of fibers, (b) production, purification and immobilization of recombinant proteins, (c) functionalization of biomaterials and (d) development of microarrays and probes.

Fluorescent probes for exploring plant cell wall deconstruction: a review

Plant biomass is a potential resource of chemicals, new materials and biofuels that could reduce our dependency on fossil carbon, thus decreasing the greenhouse effect. However, due to its chemical and structural complexity, plant biomass is recalcitrant to green biological transformation by enzymes, preventing the establishment of integrated bio-refineries. In order to gain more knowledge in the architecture of plant cell wall to facilitate their deconstruction, many fluorescent probes bearing various fluorophores have been devised and used successfully to reveal the changes in structural motifs during plant biomass deconstruction, and the molecular interactions between enzymes and plant cell wall polymers. Fluorescent probes are thus relevant tools to explore plant cell wall deconstruction.

Localization of cell wall polysaccharides in normal and compression wood of radiata pine: relationships with lignification and microfibril orientation

The distribution of noncellulosic polysaccharides in cell walls of tracheids and xylem parenchyma cells in normal and compression wood of Pinus radiata, was examined to determine the relationships with lignification and cellulose microfibril orientation. Using fluorescence microscopy combined with immunocytochemistry, monoclonal antibodies were used to detect xyloglucan (LM15), β(1,4)-galactan (LM5), heteroxylan (LM10 and LM11), and galactoglucomannan (LM21 and LM22). Lignin and crystalline cellulose were localized on the same sections used for immunocytochemistry by autofluorescence and polarized light microscopy, respectively. Changes in the distribution of noncellulosic polysaccharides between normal and compression wood were associated with changes in lignin distribution. Increased lignification of compression wood secondary walls was associated with novel deposition of β(1,4)-galactan and with reduced amounts of xylan and mannan in the outer S2 (S2L) region of tracheids. Xylan and mannan were detected in all lignified xylem cell types (tracheids, ray tracheids, and thick-walled ray parenchyma) but were not detected in unlignified cell types (thin-walled ray parenchyma and resin canal parenchyma). Mannan was absent from the highly lignified compound middle lamella, but xylan occurred throughout the cell walls of tracheids. Using colocalization measurements, we confirmed that polysaccharides containing galactose, mannose, and xylose have consistent correlations with lignification. Low or unsubstituted xylans were localized in cell wall layers characterized by transverse cellulose microfibril orientation in both normal and compression wood tracheids. Our results support the theory that the assembly of wood cell walls, including lignification and microfibril orientation, may be mediated by changes in the amount and distribution of noncellulosic polysaccharides.

Transgenic soybean plants overexpressing O-acetylserine sulfhydrylase accumulate enhanced levels of cysteine and Bowman-Birk protease inhibitor in seeds

Soybeans provide an excellent source of protein in animal feed. Soybean protein quality can be enhanced by increasing the concentration of sulfur-containing amino acids. Previous attempts to increase the concentration of sulfur-containing amino acids through the expression of heterologous proteins have met with limited success. Here, we report a successful strategy to increase the cysteine content of soybean seed through the overexpression of a key sulfur assimilatory enzyme. We have generated several transgenic soybean plants that overexpress a cytosolic isoform of O-acetylserine sulfhydrylase (OASS). These transgenic soybean plants exhibit a four- to tenfold increase in OASS activity when compared with non-transformed wild-type. The OASS activity in the transgenic soybeans was significantly higher at all the stages of seed development. Unlike the non-transformed soybean plants, there was no marked decrease in the OASS activity even at later stages of seed development. Overexpression of cytosolic OASS resulted in a 58-74% increase in protein-bound cysteine levels compared with non-transformed wild-type soybean seeds. A 22-32% increase in the free cysteine levels was also observed in transgenic soybeans overexpressing OASS. Furthermore, these transgenic soybean plants showed a marked increase in the accumulation of Bowman-Birk protease inhibitor, a cysteine-rich protein. The overall increase in soybean total cysteine content (both free and protein-bound) satisfies the recommended levels required for the optimal growth of monogastric animals.

Immunolocalization and structural variations of xylan in differentiating earlywood tracheid cell walls of Cryptomeria japonica

We investigated the spatial and temporal distribution of xylans in the cell walls of differentiating earlywood tracheids of Cryptomeria japonica using two different types of monoclonal antibodies (LM10 and LM11) combined with immunomicroscopy. Xylans were first deposited in the corner of the S(1) layer in the early stages of S(1) formation in tracheids. Cell corner middle lamella also showed strong xylan labeling from the early stage of cell wall formation. During secondary cell wall formation, the innermost layer and the boundary between the S(1) and S(2) layers (S(1)/S(2) region) showed weaker labeling than other parts of the cell wall. However, mature tracheids had an almost uniform distribution of xylans throughout the entire cell wall. Xylan localization labeled with LM10 antibody was stronger in the outer S(2) layer than in the inner layer, whereas xylans labeled with LM11 antibody were almost uniformly distributed in the S(2) layer. In addition, the LM10 antibody showed almost no xylan labeling in the S(1)/S(2) region, whereas the LM11 antibody revealed strong xylan labeling in the S(1)/S(2) region. These findings suggest that structurally different types of xylans may be deposited in the tracheid cell wall depending on the developmental stage of, or location in, the cell wall. Our study also indicates that deposition of xylans in the early stages of tracheid cell wall formation may be spatially consistent with the early stage of lignin deposition in the tracheid cell wall.

Cell wall regeneration in Bangia atropurpurea (Rhodophyta) protoplasts observed using a mannan-specific carbohydrate-binding module

The cell wall of the red alga Bangia atropurpurea is composed of three unique polysaccharides (beta-1,4-mannan, beta-1,3-xylan, and porphyran), similar to that in Porphyra. In this study, we visualized beta-mannan in the regenerating cell walls of B. atropurpurea protoplasts by using a fusion protein of a carbohydrate-binding module (CBM) and green fluorescent protein (GFP). A mannan-binding family 27 CBM (CBM27) of beta-1,4-mannanase (Man5C) from Vibrio sp. strain MA-138 was fused to GFP, and the resultant fusion protein (GFP-CBM27) was expressed in Escherichia coli. Native affinity gel electrophoresis revealed that GFP-CBM27 maintained its binding ability to soluble beta-mannans, while normal GFP could not bind to beta-mannans. Protoplasts were isolated from the fronds of B. atropurpurea by using three kinds of bacterial enzymes. The GFP-CBM27 was mixed with protoplasts from different growth stages, and the process of cell wall regeneration was observed by fluorescence microscopy. Some protoplasts began to excrete beta-mannan at certain areas of their cell surface after 12 h of culture. As the protoplast culture progressed, beta-mannans were spread on their entire cell surfaces. The percentages of protoplasts bound to GFP-CBM27 were 3%, 12%, 17%, 29%, and 25% after 12, 24, 36, 48, and 60 h of culture, respectively. Although GFP-CBM27 bound to cells at the initial growth stages, its binding to the mature fronds was not confirmed definitely. This is the first report on the visualization of beta-mannan in regenerating algal cell walls by using a fluorescence-labeled CBM.

Affinity maturation generates greatly improved xyloglucan-specific carbohydrate binding modules

BACKGROUND

Molecular evolution of carbohydrate binding modules (CBM) is a new approach for the generation of glycan-specific molecular probes. To date, the possibility of performing affinity maturation on CBM has not been investigated. In this study we show that binding characteristics such as affinity can be improved for CBM generated from the CBM4-2 scaffold by using random mutagenesis in combination with phage display technology.

RESULTS

Two modified proteins with greatly improved affinity for xyloglucan, a key polysaccharide abundant in the plant kingdom crucial for providing plant support, were generated. Both improved modules differ from other existing xyloglucan probes by binding to galactose-decorated subunits of xyloglucan. The usefulness of the evolved binders was verified by staining of plant sections, where they performed better than the xyloglucan-binding module from which they had been derived. They discriminated non-fucosylated from fucosylated xyloglucan as shown by their ability to stain only the endosperm, rich in non-fucosylated xyloglucan, but not the integument rich in fucosylated xyloglucan, on tamarind seed sections.

CONCLUSION

We conclude that affinity maturation of CBM selected from molecular libraries based on the CBM4-2 scaffold is possible and has the potential to generate new analytical tools for detection of plant carbohydrates.