In vitro effect of fluoride oral hygiene tablets on artificial caries lesion formation and remineralization in human enamel

Microcomputed tomography evaluation of white spot lesion remineralization with various procedures

INTRODUCTION

The aim of this study was to use microcomputed tomography to evaluate the effects on white spot lesions of 3 remineralizing agents compared with artificial saliva (Inonu University, Malatya, Turkey). The agents were GC Tooth Mousse (GC International, Itabashi-ku, Tokyo, Japan), 50-ppm sodium fluoride solution (Inonu University, Malatya, Turkey), and Clinpro 5000 (3M ESPE Dental Products (St Paul, Minn). The experimental and control teeth were stored in artificial saliva.

METHODS

Forty-four extracted premolars were divided into 4 groups of 11 teeth each (3 experimental groups and 1 control group). After white spot lesions were created on the teeth, a remineralizing agent was applied. Microcomputed tomography scanning was performed at the following times: T0 (sound enamel), T1 (day 0, when the white spot lesion was formed), T2 (day 15), and T3 (day 30). Volume, depth, surface area, and mineral density changes of the white spot lesions were evaluated at different time points using CTAn software (SkyScan; Bruker, Kontich, Belgium).

RESULTS

GC Tooth Mousse and Clinpro 5000 improved all measurements after 30 days. However, Clinpro 5000 was not as effective in reducing lesion depth as it was in the other parameters. The artificial saliva group and the 50-ppm sodium fluoride solution did not show significant effects in the regression of the white spot lesions at the end of the 30-day experiment.

CONCLUSIONS

GC Tooth Mousse and Clinpro 5000 were more effective in remineralization of white spot lesions than sodium fluoride solution and artificial saliva. They can be preferred for use clinically. Microcomputed tomography is a novel and effective method that shows promise in accurately evaluating white spot lesions and remineralization.

Nanotribological and Nanomechanical Properties Changes of Tooth After Bleaching and Remineralization in Wet Environment

Teeth bleaching cases had increased with people's desire for oral aesthetic; however, bleached teeth would still undertake chewing actions and remineralizing process in saliva. Nanotribological and nanomechanical properties are proper displays for dental performance of bleached teeth. The purpose of the research was to reveal the effect of bleaching and remineralization on the nanotribological and nanomechanical properties of teeth in wet environment. The specimens were divided into four groups according to the bleaching products used: 12 % hydrogen peroxide (HP) (12HP group); 15 % carbamide peroxide (CP) (15CP group); 35 % CP (35CP group); and artificial saliva (control group). The nanotribological and nanomechanical property changes of tooth enamel after bleaching and remineralization were evaluated respectively by nanoscratch and nanoindentation tests in wet environment, imitating the wet oral environment. The morphology changes were evaluated by statistical parametric mapping (SPM) and scanning electron microscopy (SEM). After bleaching, 12HP group and 15CP group showed increased scratch depth with more pile ups on the scratch edges, decreased nanohardness, and corroded surface appearance. While the 35CP group showed an increase in nanoscratch depth, no change in nanohardness and surface appearance was observed. The control group showed no change in these measurements. After remineralization, the three bleaching groups showed decreased nanoscratch depth and no change of nanohardness compared with the bleached teeth. And the control group showed no changes in nanotribological and nanomechanical properties. The nanotribological and nanomechanical properties of the 12HP group and 15CP group were affected by bleaching, but the nanotribological properties recovered partly and the nanomechanical properties got no change after 1 week of remineralization. As for the 35CP group, the nanotribological properties were influenced and the nanomechanical properties were not affected. These results remind us of taking actions to protect our teeth during bleaching.

A comparative in vitro efficacy of conventional rotatory and chemomechanical caries removal: Influence on cariogenic flora, microhardness, and residual composition

Background:

Chemomechanical caries removal system is part of the minimal invasive dentistry; the aim of the study was to compare the amount of bacteria after caries removal with chemomechanical system and conventional rotatory instruments and to test the Vickers microhardness and micro-RAMAN analysis of residual dentin after excavation.

Materials and Methods:

Molars were induced for demineralization, confirmed with DIAGNOdent; Streptococcus mutans were inoculated into the cavities and filled. Caries removal was performed with rotatory instruments and chemomechanical system; surviving bacteria were cultured for 24 and 48 hours at 37°C. Vickers microhardness and micro-RAMAN analysis were tested after excavation. Data were analyzed with Wilcoxon, continuity correction, odds ratio, ANOVA post hoc Tukey test, and Spearman correlation.

Results:

Demineralization was significantly detectable at 240 hours of incubation; conventional rotatory instruments and chemomechanical caries removal were effective in 19.4%-22.6% and 25.8%-32.3%, respectively. Vickers microhardness of chemomechanical system was higher (P < 0.0001) than conventional rotatory instruments and comparable to healthy dentin. Micro-RAMAN analysis showed that healthy dentin is correlated to chemomechanical system (R² = 0.683, P < 0.00001) and drilling with burs (R² = 0.139, P < 0.00001).

Conclusion:

The chemomechanical system is effective for caries elimination, comparable to conventional rotatory instruments; the remaining Vickers microhardness and composition surface tissue are similar to healthy dentin.

Management of Enamel White Spot Lesions

Dental caries is a highly prevalent multifactorial disease and is a major public health problem. A goal of modern dentistry is to manage enamel white spot lesions noninvasively and effectively an attempt to prevent disease progression and improve esthetics, strength and function. The progression of caries has been tried to be curbed at initial stage only but for that only use of fluoride application was suggested but with recent developments in dental materials other remineralization options as well as noninvasive masking procedure can be performed to attain best result. This article reviews all the materials and techniques mentioned in the literature to manage the world's most common disease in its initial stage only.

How to cite this article

Joshi S, Joshi C. Management of Enamel White Spot Lesions. J Contemp Dent 2013;3(3):133-137.

Effects of different amine fluoride concentrations on enamel remineralization

OBJECTIVES

The aim of this study was to investigate the effects of decreasing fluoride concentrations on repeated demineralizing challenges on human enamel.

MATERIALS AND METHODS

In 24 teeth, 3mm×3mm windows were prepared on the buccal and lingual sides and treated in a cycling demineralization-remineralization model. Remineralization was achieved with 100, 10 and 0.1 ppm fluoride from anime fluoride. Coronal sections were cut through the artificial lesions, and three sections per tooth were investigated using polarized light microscopy and scanning electron microscopy with quantitative element analysis.

RESULTS

The morphology of the lesions was studied, and the extensions of the superficial layer and the body of the lesion were measured. Using element analysis, the Ca, P and F content were determined. The body of the lesion appeared remineralized after application of 100 ppm fluoride, while remineralization of the lesion was less successful after application of 10 and 0.1 ppm fluoride. The thickness of the superficial layer increased with decreasing fluoride concentrations, and also the extension of the body of the lesion increased. Ca and P content increased with increasing fluoride concentrations.

CONCLUSIONS

The effectiveness of fluoride in enamel remineralization increased with increasing fluoride concentration.

CLINICAL RELEVANCE

A consistently higher level of fluoride in saliva should be a goal in caries prevention.

Fluoride bioavailability in saliva and plaque

Background

Different fluoride formulations may have different effects on caries prevention. It was the aim of this clinical study to assess the fluoride content, provided by NaF compared to amine fluoride, in saliva and plaque.

Methods

Eight trained volunteers brushed their teeth in the morning for 3 minutes with either NaF or amine fluoride, and saliva and 3-day-plaque-regrowth was collected at 5 time intervals during 6 hours after tooth brushing. The amount of collected saliva and plaque was measured, and the fluoride content was analysed using a fluoride sensitive electrode. All subjects repeated all study cycles 5 times, and 3 cycles per subject underwent statistical analysis using the Wilcoxon-Mann-Whitney test.

Results

Immediately after brushing the fluoride concentration in saliva increased rapidly and dropped to the baseline level after 360 minutes. No difference was found between NaF and amine fluoride. All plaque fluoride levels were elevated after 30 minutes until 120 minutes after tooth brushing, and decreasing after 360 minutes to baseline. According to the highly individual profile of fluoride in saliva and plaque, both levels of bioavailability correlated for the first 30 minutes, and the fluoride content of saliva and plaque was back to baseline after 6 hours.

Conclusions

Fluoride levels in saliva and plaque are interindividually highly variable. However, no significant difference in bioavailability between NaF and amine fluoride, in saliva, or in plaque was found.

Light- and electronmicroscopic study of infiltration of resin into initial caries lesions--a new methodological approach

It was the purpose of this pilot study to investigate resin infiltration into various types of initial subsurface caries lesions using a combined microscopic technique with polarized light microscopy and fluorescence microscopy and subsequent scanning microscopy with EDX-element analysis. Six extracted premolars with initial caries lesions were used. Five were infiltrated with resin after imbibition of the subsurface carious pore volume of enamel with sodium fluorescein solution. After light curing the unbound dye was removed by washing out in water. Serial sections were cut through the lesions and investigated with polarized light microscopy, fluorescence microscopy and simultaneously with both microscopic techniques. The same sections were then studied with scanning electron microscopy and EDX-element analysis to prove the infiltration of the resin into the lesions. The results showed, that the combination technique adds further morphologic information to infiltration behaviour of the resin. The individual volume of early acute lesions versus chronic lesions involving dentin, and the fluorescein bound by resin was well documented in serial sections. The EDX calcium and phosphorus signals correlate negatively with the lesion extension, and the carbon signal correlates positively, thus labelling the resin infiltration. It could be demonstrated that resin infiltration is dependent from the pore volume of the lesion. It can be concluded that the combined polarized light microscopy with fluorescence microscopy is an advantageous tool for studying infiltration of resin into hard tissues.

EDX-Element Analysis of the In Vitro Effect of Fluoride Oral Hygiene Tablets on Artificial Caries Lesion Formation and Remineralization in Human Enamel

Aim of this in-vitro-study was to assess the remineralization potential of a tooth cleaning tablet with different fluoride content quantitatively using EDX analysis.Twenty three caries free impacted third molars were examined; enamel surfaces were wax coated leaving two 3x4mm windows for exposure to demineralization/remineralization cycles. The teeth were randomly assigned to 4 groups of 5 control and 6 experimental teeth each. Demineralization by standardized HEC-gel, pH 4.7 at 37°C for 72h, was alternated by rinsing in remineralization solution, pH 7.0 at 37°C for 72h, total challenge time 432h. The negative control group N was treated during remineralization cycles with saline; positive control group P was treated with remineralization solution; experimental group D1 was exposed to remineralization solution containing Denttabs(®)-tablets with 1450 ppm F; experimental group D2 was exposed to remineralization solution and Denttabs(®)-tablets with 4350 ppm F. Each tooth was cut into serial sections and analyzed by scanning electron microscopy with EDX element analysis for assessment of the different zones of the lesions in 3 representative sections. Statistical analysis was based on the AVOVA test for repeated measurements and post hoc Bonferroni adjustment. The results showed a significantly higher Ca and P content in the body of the lesion in both fluoride treated groups compared to the controls. It can be concluded that higher concentrations of NaF may be more effective in remineralization of early advanced caries lesions.

Influence of individual saliva secretion on fluoride bioavailability

The aim of this preliminary investigation was to compare the individual saliva secretion rate with the fluoride bioavailability in saliva after using sodium fluoride and amine fluoride.

METHODS

To assess oral fluoride kinetics 10 highly trained volunteers brushed their teeth with one of the formulations and saliva was collected. The amount of saliva was measured, and the fluoride content was determined. Data underwent statistical analysis using the Mann-Whitney-U test and Pearson correlation. The ex vivo experiment I included individual saliva collection of the same volunteers. Then the oral hygiene products were solved in equal amounts of whole saliva (ex-vivo experiment II), and the fluoride content was measured. Finally, both products were dispersed in distilled water (ex-vivo experiment III) to calculate the dissociation of both products in water.

RESULTS

In vivo results of fluoride content after 3 min. tooth brushing demonstrated a negative correlation with saliva secretion: for NaF r = -0.695 (p<0.01) and for amine fluoride r = -0.446 (p<0.01). The in-vitro experiment I resulted for NaF in 251.7±22.4 µg/g fluoride and for amine fluoride in 171.7±14.4 µg/g.

CONCLUSIONS

Fluoride bioavailability of saliva after exposure to NaF was higher compared to amine fluoride. The individual secretion rate changes the fluoride content and normal secretors keep the fluoride availability longer.