A novel method of cultivating cardiac myocytes in agarose microchamber chips for studying cell synchronization

Dominant rule of community effect in synchronized beating behavior of cardiomyocyte networks

Exploiting the combination of latest microfabrication technologies and single cell measurement technologies, we can measure the interactions of single cells, and cell networks from "algebraic" and "geometric" perspectives under the full control of their environments and interactions. However, the experimental constructive single cell-based approach still remains the limitations regarding the quality and condition control of those cells. To overcome these limitations, mathematical modeling is one of the most powerful complementary approaches. In this review, we first explain our on-chip experimental methods for constructive approach, and we introduce the results of the "community effect" of beating cardiomyocyte networks as an example of this approach. On-chip analysis revealed that (1) synchronized interbeat intervals (IBIs) of cell networks were followed to the more stable beating cells even their IBIs were slower than the other cells, which is against the conventional faster firing regulation or "overdrive suppression," and (2) fluctuation of IBIs of cardiomyocyte networks decreased according to the increase of the number of connected cells regardless of their geometry. The mathematical simulation of this synchronous behavior of cardiomyocyte networks also fitted well with the experimental results after incorporating the fluctuation-dissipation theorem into the oscillating stochastic phase model, in which the concept of spatially arranged cardiomyocyte networks was involved. The constructive experiments and mathematical modeling indicated the dominant rule of synchronization behavior of beating cardiomyocyte networks is a kind of stability-oriented synchronization phenomenon as the "community effect" or a fluctuation-dissipation phenomenon. Finally, as a practical application of this approach, the predictive cardiotoxicity is introduced.

Exploring the implicit interlayer regulatory mechanism between cells and tissue: stochastic mathematical analyses of the spontaneous ordering in beating synchronization

The present study focused on beating synchronization, and tried to elucidate the interlayer regulatory mechanisms between the cells and clump in beating synchronization with using the stochastic simulations which realize the beating synchronizations in beating cells with low cell-cell conductance. Firstly, the fluctuation in interbeat intervals (IBIs) of beating cells encouraged the process of beating synchronization, which was identified as the stochastic resonance. Secondly, fluctuation in the synchronized IBIs of a clump decreased as the number of beating cells increased. The decrease in IBI fluctuation due to clump formation implied both a decline of the electrophysiological plasticity of each beating cell and an enhancement of the electrophysiological stability of the clump. These findings were identified as the community effects. Because IBI fluctuation and the community effect facilitated the beating stability of the cell and clump, these factors contributed to the spontaneous ordering in beating synchronization. Thirdly, the cellular layouts in clump affected the synchronized beating rhythms. The synchronized beating rhythm in clump was implicitly regulated by a complicated synergistic effect among IBI fluctuation of each beating cell, the community effect and the cellular layout. This finding was indispensable for leading an elucidation of mechanism of emergence. The stochastic simulations showed the necessity of considering the synergistic effect, to elucidate the interlayer regulatory mechanisms in biological system.

On-chip constructive cell-network study (I): contribution of cardiac fibroblasts to cardiomyocyte beating synchronization and community effect

Backgrounds

To clarify the role of cardiac fibroblasts in beating synchronization, we have made simple lined-up cardiomyocyte-fibroblast network model in an on-chip single-cell-based cultivation system.

Results

The synchronization phenomenon of two cardiomyocyte networks connected by fibroblasts showed (1) propagation velocity of electrophysiological signals decreased a magnitude depending on the increasing number of fibroblasts, not the lengths of fibroblasts; (2) fluctuation of interbeat intervals of the synchronized two cardiomyocyte network connected by fibroblasts did not always decreased, and was opposite from homogeneous cardiomyocyte networks; and (3) the synchronized cardiomyocytes connected by fibroblasts sometimes loses their synchronized condition and recovered to synchronized condition, in which the length of asynchronized period was shorter less than 30 beats and was independent to their cultivation time, whereas the length of synchronized period increased according to cultivation time.

Conclusions

The results indicated that fibroblasts can connect cardiomyocytes electrically but do not significantly enhance and contribute to beating interval stability and synchronization. This might also mean that an increase in the number of fibroblasts in heart tissue reduces the cardiomyocyte 'community effect', which enhances synchronization and stability of their beating rhythms.

Microchips for cell-based assays

Analysis of cells is a cornerstone in biomedical research. Traditional methods for cell culture and tissue analysis can be replaced by various microchips as discussed in this chapter. A tissue array is an example of microchip that provides higher throughput of tissue analysis. Other microchips provide completely new functionalities for the researcher. One such example that will be discussed is cell culture chips. The cell culture vessel will be much more competent for studies of cell and will enable real-time monitoring of cell behavior and gene expression at a single cell level, have possibilities for studying chemotaxis and shear stress phenomena in a controlled manner, provide least tissue-like culture conditions by providing micro 3D structures, and provide arrays of integrated detectors. Tissue arrays and the simplest forms of cell culture chips are commercialized today, and we may expect a large activity in this field in the future.

A transparent cell-culture microchamber with a variably controlled concentration gradient generator and flow field rectifier

Real-time observation of cell growth provides essential information for studies such as cell migration and chemotaxis. A conventional cell incubation device is usually too clumsy for these applications. Here we report a transparent microfluidic device that has an integrated heater and a concentration gradient generator. A piece of indium tin oxide (ITO) coated glass was ablated by our newly developed visible laser-induced backside wet etching (LIBWE) so that transparent heater strips were prepared on the glass substrate. A polymethylmethacrylate (PMMA) microfluidic chamber with flow field rectifiers and a reagent effusion hole was fabricated by a CO(2) laser and then assembled with the ITO heater so that the chamber temperature can be controlled for cell culturing. A variable chemical gradient was generated inside the chamber by combining the lateral medium flow and the flow from the effusion hole. Successful culturing was performed inside the device. Continuous long-term (>10 days) observation on cell growth was achieved. In this work the flow field, medium replacement, and chemical gradient in the microchamber are elaborated.

An on-chip cardiomyocyte cell network assay for stable drug screening regarding community effect of cell network size

We investigate the effect of haloperidol on a four-cell and nine-cell cardiomyocyte network on an agarose microchamber array chip to evaluate a cell-based model for drug screening. Using a network of cardiomyocytes whose beating intervals were stable and relatively uniform (they only fluctuated 10% from the mean beating interval), we easily observed the effect of haloperidol on the cell network beating interval 5 min after administering it. We also observed the beating interval returned to its original state 10 min after the haloperidol was washed out of the chip. Although the four-cell network showed the unstable recovery of its beating rhythm after washout of haloperidol, the nine-cell network recovered completely to the stable original beating rhythm even after a second administration of haloperidol. The results indicate the importance of the community size in cell networks used in the stable cell-based screening model. Moreover, they indicate the advantage of using direct cell-based measurements in which the amount of drug administered and the time course over which it is administered are strictly controlled for evaluating the quantitative chemical effects of drugs on cells.

Phagocytic response to fully controlled plural stimulation of antigens on macrophage using on-chip microcultivation system

To understand the control mechanism of innate immune response in macrophages, a series of phagocytic responses to plural stimulation of antigens on identical cells was observed. Two zymosan particles, which were used as antigens, were put on different surfaces of a macrophage using optical tweezers in an on-chip single-cell cultivation system, which maintains isolated conditions of each macrophage during their cultivation. When the two zymosan particles were attached to the macrophage simultaneously, the macrophage responded and phagocytosed both of the antigens simultaneously. In contrast, when the second antigen was attached to the surface after the first phagocytosis had started, the macrophage did not respond to the second stimulation during the first phagocytosis; the second phagocytosis started only after the first process had finished. These results indicate that (i) phagocytosis in a macrophage is not an independent process when there are plural stimulations; (ii) the response of the macrophage to the second stimulation is related to the time" delay from the first stimulation. Stimulations that occur at short time intervals resulted in simultaneous phagocytosis, while a second stimulation that is delayed long enough might be neglected until the completion of the first phagocytic process.

A biocompatible micro cell culture chamber (microCCC) for the culturing and on-line monitoring of eukaryote cells

We have previously shown that a polymeric (PMMA) chip with medium perfusion and integrated heat regulation provides sufficiently precise heat regulation, pH-control and medium exchange to support cell growth for weeks. However, it was unclear how closely the cells cultured in the chip resembled cells cultured in the culture flask. In the current study, gene expression profiles of cells cultured in the chip were compared with gene expression profiles of cells cultured in culture flasks. The results showed that there were only two genes that were differently expressed in cells grown in the cell culture chip compared to cell culture flasks. The cell culture chip could without further modification support cell growth of two other cell lines. Light coming from the microscope lamp during optical recordings of the cells was the only external factor identified, that could have a negative effect on cell survival. Low grade light exposure was however compatible with optical recordings as well as cell viability. These results strongly indicate that a cell culture chip could be constructed that allowed for on-line optical recording of cellular events without affecting the cell culturing condition compared to cell cultured in culture flasks incubated in a dark and CO2 conditioned incubator.

Stability of beating frequency in cardiac myocytes by their community effect measured by agarose microchamber chip

To understand the contribution of community effect on the stability of beating frequency in cardiac myocyte cell groups, the stepwise network formation of cells as the reconstructive approach using the on-chip agarose microchamber cell microcultivation system with photo-thermal etching method was applied. In the system, the shapes of agarose microstructures were changed step by step with photo-thermal etching of agarose-layer of the chip using a 1064-nm infrared focused laser beam to increase the interaction of cardiac myocyte cells during cultivation. First, individual rat cardiac myocyte in each microstructure were cultivated under isolated condition, and then connected them one by one through newly-created microchannels by photo-thermal etching to compare the contribution of community size for the magnitude of beating stability of the cell groups. Though the isolated individual cells have 50% fluctuation of beating frequency, their stability increased as the number of connected cells increased. And finally when the number reached to eight cells, they stabilized around the 10% fluctuation, which was the same magnitude of the tissue model cultivated on the dish. The result indicates the importance of the community size of cells to stabilize their performance for making cell-network model for using cells for monitoring their functions like the tissue model.