Simultaneous detection of Human Immunodeficiency Virus 1 and Hepatitis B virus infections using a dual-label time-resolved fluorometric assay

Double-Antigen Lateral Flow Immunoassay for the Detection of Anti-HIV-1 and -2 Antibodies Using Upconverting Nanoparticle Reporters

Rapid diagnostic tests (RDTs) are often used for the detection of anti-human immunodeficiency virus (HIV) antibodies in remote locations in low- and middle-income countries (LMIC) with low or limited access to central laboratories. The typical format of an RDT is a lateral flow assay (LFA) with visual interpretation prone to subjectivity. This risk of misinterpretation can be overcome with luminescent upconverting nanoparticle reporters (UCNPs) measured with a miniaturized easy-to-use reader instrument. An LFA with UCNPs for anti-HIV-1/2 antibodies was developed and the assay performance was evaluated extensively with challenging patient sample panels. Sensitivity (n = 145) of the UCNP-LFA was 96.6% (95% CI: 92.1–98.8%) and specificity (n = 309) was 98.7% (95% CI: 96.7–99.7%). Another set of samples (n = 200) was used for a comparison between the UCNP-LFA and a conventional visual RDT. In this comparison, the sensitivities for HIV-1 were 96.4% (95% CI: 89.8–99.3%) and 97.6% (95% CI: 91.6–99.7%), for the UCNP-LFA and conventional RDT, respectively. The specificity was 100% (95% CI: 96.4–100%) for both assays. The developed UCNP-LFA demonstrates the applicability of UCNPs for the detection of anti-HIV antibodies. The signal measurement is done by a reader instrument, which may facilitate automated result interpretation, archiving and transfer of data from de-centralized locations.

Europium nanoparticle-based simple to perform dry-reagent immunoassay for the detection of hepatitis B surface antigen

Hepatitis B infection, caused by hepatitis B virus (HBV), presents a huge global health burden. Serological diagnosis of HBV mainly relies on the detection of hepatitis B surface antigen (HBsAg). Although there are high sensitivity commercial HBsAg enzyme immunoassays (EIAs) available, many low-resource laboratories lacking trained technicians continue to use rapid point-of-care assays with low sensitivities for HBsAg detection, due to their simplicity to operate. We developed a time-resolved fluorometric dry-reagent HBsAg immunoassay which meets the detection limit of high sensitivity EIAs but is simple to operate. To develop the assay, anti-HBsAg monoclonal antibody coated on europium nanoparticles was dried atop of biotinylated anti-HBsAg polyclonal antibody immobilized on streptavidin-coated microtiter wells. To test a sample in dry-reagent assay, serum sample and assay buffer were added to the wells, incubated, washed and europium signals were measured. The assay showed a detection limit of 0.25 ng/ml using HBsAg spiked in serum sample. When evaluated with 24 HBV positive and 37 negative serum samples, assay showed 100% sensitivity and specificity. Assay wells are stable for at least 26 weeks when stored at 4°C, and can tolerate elevated temperatures of up to 35°C for two weeks. The developed assay has high potential to be used in low-resource laboratories.

Array-in-well platform-based multiplex assay for the simultaneous detection of anti-HIV- and treponemal-antibodies, and Hepatitis B surface antigen

Multiplex assays detecting sets of related clinical analytes simultaneously can save considerable amount of time and resources. Array-in-well (AIW) is a powerful platform for the multiplex detection of different analytes where microarrays can be printed at the bottom of microtiter wells, thus combining the potential of microarrays with the ease of handling microtiter wells. We have developed a single-step AIW assay for the simultaneous screening of HIV, Treponema pallidum subspecies pallidum (causing syphilis) and Hepatitis B virus infections targeting the specific detection of anti-HIV- and treponemal-antibodies and Hepatitis B surface antigen (HBsAg), respectively, using two different fluorescent label technologies i.e. DyLight 633 and europium nanoparticle. Double-antigen assay formats were used for anti-HIV- and treponemal-antibody detection that can simultaneously detect both IgG and IgM, and thus reduce the window period of detection. AIW assay was evaluated with well characterized serum/plasma samples (n=111), and the qualitative results were in near complete agreement with those of the reference assays. The AIW assay exhibited 100% sensitivities for all three analytes, and 100% specificities for anti-HIV antibodies and HBsAg, and 98.6% specificity for treponemal antibodies. The limit of detection of HBsAg in AIW assay was 0.18 ng/ml. This high performing AIW assay has the potential to be used as a multiplex screening test for these three infections.

Detection of hepatitis B virus infection: A systematic review

AIM: To review published methods for detection of hepatitis B virus (HBV) infection.

METHODS: A thorough search on Medline database was conducted to find original articles describing different methods or techniques of detection of HBV, which are published in English in last 10 years. Articles outlining methods of detection of mutants or drug resistance were excluded. Full texts and abstracts (if full text not available) were reviewed thoroughly. Manual search of references of retrieved articles were also done. We extracted data on different samples and techniques of detection of HBV, their sensitivity (Sn), specificity (Sp) and applicability.

RESULTS: A total of 72 studies were reviewed. HBV was detected from dried blood/plasma spots, hepatocytes, ovarian tissue, cerumen, saliva, parotid tissue, renal tissue, oocytes and embryos, cholangiocarcinoma tissue, etc. Sensitivity of dried blood spot for detecting HBV was > 90% in all the studies. In case of seronegative patients, HBV DNA or serological markers have been detected from hepatocytes or renal tissue in many instances. Enzyme linked immunosorbent assay and Chemiluminescent immunoassay (CLIA) are most commonly used serological tests for detection. CLIA systems are also used for quantitation. Molecular techniques are used qualitatively as well as for quantitative detection. Among the molecular techniques version 2.0 of the CobasAmpliprep/CobasTaqMan assay and Abbott’s real time polymerase chain reaction kit were found to be most sensitive with a lower detection limit of only 6.25 IU/mL and 1.48 IU/mL respectively.

CONCLUSION: Serological and molecular assays are predominant and reliable methods for HBV detection. Automated systems are highly sensitive and quantify HBV DNA and serological markers for monitoring.

Applications of human hepatitis B virus preS domain in bio- and nanotechnology

Human hepatitis B virus (HBV) is a member of the family Hepadnaviridae, and causes acute and chronic infections of the liver. The hepatitis B surface antigen (HBsAg) contains the large (L), middle (M), and small (S) surface proteins. The L protein consists of the S protein, preS1, and preS2. In HBsAg, the preS domain (preS1 + preS2) plays a key role in the infection of hepatocytic cells by HBV and has several immunogenic epitopes. Based on these characteristics of preS, several preS-based diagnostic and therapeutic materials and systems have been developed. PreS1-specific monoclonal antibodies (e.g., MA18/7 and KR127) can be used to inhibit HBV infection. A myristoylated preS1 peptide (amino acids 2-48) also inhibits the attachment of HBV to HepaRG cells, primary human hepatocytes, and primary tupaia hepatocytes. Antibodies and antigens related to the components of HBsAg, preS (preS1 + preS2), or preS1 can be available as diagnostic markers of acute and chronic HBV infections. Hepatocyte-targeting delivery systems for therapeutic molecules (drugs, genes, or proteins) are very important for increasing the clinical efficacy of these molecules and in reducing their adverse effects on other organs. The selective delivery of diagnostic molecules to target hepatocytic cells can also improve the efficiency of diagnosis. In addition to the full-length HBV vector, preS (preS1 + preS2), preS1, and preS1-derived fragments can be useful in hepatocyte-specific targeting. In this review, we discuss the literature concerning the applications of the HBV preS domain in bio- and nanotechnology.

Simultaneous determination of the cytokeratin 19 fragment and carcinoembryonic antigen in human serum by magnetic nanoparticle-based dual-label time-resolved fluoroimmunoassay

A magnetic nanoparticle-based dual-label TRFIA employing europium and samarium chelate labels for simultaneous determination of CYFRA 21-1 and CEA.

A rapid and sensitive method based on magnetic beads for the detection of hepatitis B virus surface antigen in human serum

Current clinically assays, such as enzyme-linked immunosorbent assay and chemiluminescence immunoassay, for hepatitis B surface antigen (HBsAg) are inferior in terms of either sensitivity and accuracy or rapid and high-throughput analysis. A novel assay based on magnetic beads and time-resolved fluoroimmunoassay was developed for the quantitative determination of HBsAg in human serum. HBsAg was captured using two types of anti-HBsAg monoclonal antibodies (B028, S015) immobilized on to magnetic beads and detected using europium-labeled anti-HBsAg polyclonal detection antibody. Finally, the assay yielded a high sensitivity (0.02 IU/mL) and a wide dynamic range (0.02-700 IU/mL) for HBsAg when performed under optimal conditions. Satisfactory accuracy, recovery and specificity were also demonstrated. The intra- and interassay coefficients of variation were 4.7-8.7% and 3.8-7.5%, respectively. The performance of this assay was further assessed against a well-established commercial chemiluminescence immunoassay kit with 399 clinical serum samples. It was revealed that the test results for the two methods were in good correlation (Y = 1.182X - 0.017, R = 0.989). In the current study, we demonstrated that this novel time-resolved fluoroimmunoassay could be used: as a highly sensitive, automated and high-throughput immunoassay for the diagnosis of acute or chronic hepatitis B virus infection; for the screening of blood or organ donors; and for the surveillance of persons at risk of acquiring or transmitting hepatitis B virus.

Dengue-specific subviral nanoparticles: design, creation and characterization

Background

Dengue is today the most significant of arboviral diseases. Novel tools are necessary to effectively address the problem of dengue. Virus-like particles (VLP) offer a versatile nanoscale platform for developing tools with potential biomedical applications. From the perspective of a potentially useful dengue-specific tool, the dengue virus envelope protein domain III (EDIII), endowed with serotype-specificity, host receptor recognition and the capacity to elicit virus-neutralizing antibodies, is an attractive candidate.

Methods

We have developed a strategy to co-express and co-purify Hepatitis B virus surface (S) antigen in two forms: independently and as a fusion with EDIII. We characterized these physically and functionally.

Results

The two forms of the S antigen associate into VLPs. The ability of these to display EDIII in a functionally accessible manner is dependent upon the relative levels of the two forms of the S antigen. Mosaic VLPs containing the fused and un-fused components in 1:4 ratio displayed maximal functional competence.

Conclusions

VLPs armed with EDIII may be potentially useful in diagnostic, therapeutic and prophylactic applications.

Lanthanide-based time-resolved luminescence immunoassays

The sensitive and specific detection of analytes such as proteins in biological samples is critical for a variety of applications, for example disease diagnosis. In immunoassays a signal in response to the concentration of analyte present is generated by use of antibodies labeled with radioisotopes, luminophores, or enzymes. All immunoassays suffer to some extent from the problem of the background signal observed in the absence of analyte, which limits the sensitivity and dynamic range that can be achieved. This is especially the case for homogeneous immunoassays and surface measurements on tissue sections and membranes, which typically have a high background because of sample autofluorescence. One way of minimizing background in immunoassays involves the use of lanthanide chelate labels. Luminescent lanthanide complexes have exceedingly long-lived luminescence in comparison with conventional fluorophores, enabling the short-lived background interferences to be removed via time-gated acquisition and delivering greater assay sensitivity and a broader dynamic range. This review highlights the potential of using lanthanide luminescence to design sensitive and specific immunoassays. Techniques for labeling biomolecules with lanthanide chelate tags are discussed, with aspects of chelate design. Microtitre plate-based heterogeneous and homogeneous assays are reviewed and compared in terms of sensitivity, dynamic range, and convenience. The great potential of surface-based time-resolved imaging techniques for biomolecules on gels, membranes, and tissue sections using lanthanide tracers in proteomics applications is also emphasized.