Engineering of the E. coli outer membrane protein FhuA to overcome the hydrophobic mismatch in thick polymeric membranes

Unraveling the Phase Behavior, Mechanical Stability, and Protein Reconstitution Properties of Polymer-Lipid Hybrid Vesicles

Hybrid vesicles consisting of natural phospholipids and synthetic amphiphilic copolymers have shown remarkable material properties and potential for biotechnology, combining the robustness of polymers with the biocompatibility of phospholipid membranes. To predict and optimize the mixing behavior of lipids and copolymers, as well as understand the interaction between the hybrid membrane and macromolecules like membrane proteins, a comprehensive understanding at the molecular level is essential. This can be achieved by a combination of molecular dynamics simulations and experiments. Here, simulations of POPC and PBD22-b-PEO14 hybrid membranes are shown, uncovering different copolymer configurations depending on the polymer-to-lipid ratio. High polymer concentrations created thicker membranes with an extended polymer conformation, while high lipid content led to the collapse of the polymer chain. High concentrations of polymer were further correlated with a decreased area compression modulus and altered lateral pressure profiles, hypothesized to result in the experimentally observed improvement in membrane protein reconstitution and resistance toward destabilization by detergents. Finally, simulations of a WALP peptide embedded in the bilayer showed that only membranes with up to 50% polymer content favored a transmembrane configuration. These simulations correlate with previous and new experimental results and provide a deeper understanding of the properties of lipid-copolymer hybrid membranes.

High Resolution Membrane Structures within Hybrid Lipid-Polymer Vesicles Revealed by Combining X-Ray Scattering and Electron Microscopy

Hybrid vesicles consisting of phospholipids and block-copolymers are increasingly finding applications in science and technology. Herein, small angle X-ray scattering (SAXS) and cryo-electron tomography (cryo-ET) are used to obtain detailed structural information about hybrid vesicles with different ratios of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and poly(1,2-butadiene-block-ethylene oxide) (PBd₂₂ -PEO₁₄ , M_s  = 1800 g mol^-1 ). Using single particle analysis (SPA) the authors are able to further interpret the information gained from SAXS and cryo-ET experiments, showing that increasing PBd₂₂ -PEO₁₄ mole fraction increases the membrane thickness from 52 Å for a pure lipid system to 97 Å for pure PBd₂₂ -PEO₁₄ vesicles. Two vesicle populations with different membrane thicknesses in hybrid vesicle samples are found. As these lipids and polymers are reported to homogeneously mix, bistability is inferred between weak and strong interdigitation regimes of PBd₂₂ -PEO₁₄ within the hybrid membranes. It is hypothesized that membranes of intermediate structure are not energetically favorable. Therefore, each vesicle exists in one of these two membrane structures, which are assumed to have comparable free energies. The authors conclude that, by combining biophysical methods, accurate determination of the influence of composition on the structural properties of hybrid membranes is achieved, revealing that two distinct membranes structures can coexist in homogeneously mixed lipid-polymer hybrid vesicles.

FhuA: From Iron-Transporting Transmembrane Protein to Versatile Scaffolds through Protein Engineering

ConspectusProtein engineering has emerged as a powerful methodology to tailor the properties of proteins. It empowers the design of biohybrid catalysts and materials, thereby enabling the convergence of materials science, chemistry, and medicine. The choice of a protein scaffold is an important factor for performance and potential applications. In the past two decades, we utilized the ferric hydroxamate uptake protein FhuA. FhuA is, from our point of view, a versatile scaffold due to its comparably large cavity and robustness toward temperature as well as organic cosolvents. FhuA is a natural iron transporter located in the outer membrane of Escherichia coli (E. coli). Wild-type FhuA consists of 714 amino acids and has a β-barrel structure composed of 22 antiparallel β-sheets, closed by an internal globular "cork" domain (amino acids 1-160). FhuA is robust in a broad pH range and toward organic cosolvents; therefore, we envisioned FhuA to be a suitable platform for various applications in (i) biocatalysis, (ii) materials science, and (iii) the construction of artificial metalloenzymes.(i) Applications in biocatalysis were achieved by removing the globular cork domain (FhuA_Δ1-160), thereby creating a large pore for the passive transport of otherwise difficult-to-import molecules through diffusion. Introducing this FhuA variant into the outer membrane of E. coli facilitates the uptake of substrates for downstream biocatalytic conversion. Furthermore, removing the globular "cork" domain without structural collapse of the ß-barrel protein allowed the use of FhuA as a membrane filter, exhibiting a preference for d-arginine over l-arginine.(ii) FhuA is a transmembrane protein, which makes it attractive to be used for applications in non-natural polymeric membranes. Inserting FhuA into polymer vesicles yielded so-called synthosomes (i.e., catalytic synthetic vesicles in which the transmembrane protein acted as a switchable gate or filter). Our work in this direction enables polymersomes to be used in biocatalysis, DNA recovery, and the controlled (triggered) release of molecules. Furthermore, FhuA can be used as a building block to create protein-polymer conjugates to generate membranes.(iii) Artificial metalloenzymes (ArMs) are formed by incorporating a non-native metal ion or metal complex into a protein. This combines the best of two worlds: the vast reaction and substrate scope of chemocatalysis and the selectivity and evolvability of enzymes. With its large inner diameter, FhuA can harbor (bulky) metal catalysts. Among others, we covalently attached a Grubbs-Hoveyda-type catalyst for olefin metathesis to FhuA. This artificial metathease was then used in various chemical transformations, ranging from polymerizations (ring-opening metathesis polymerization) to enzymatic cascades involving cross-metathesis. Ultimately, we generated a catalytically active membrane by copolymerizing FhuA and pyrrole. The resulting biohybrid material was then equipped with the Grubbs-Hoveyda-type catalyst and used in ring-closing metathesis.The number of reports on FhuA and its various applications indicates that it is a versatile building block to generate hybrid catalysts and materials. We hope that our research will inspire future research efforts at the interface of biotechnology, catalysis, and material science in order to create biohybrid systems that offer smart solutions for current challenges in catalysis, material science, and medicine.

Synthetic Biology: Bottom-Up Assembly of Molecular Systems

The bottom-up assembly of biological and chemical components opens exciting opportunities to engineer artificial vesicular systems for applications with previously unmet requirements. The modular combination of scaffolds and functional building blocks enables the engineering of complex systems with biomimetic or new-to-nature functionalities. Inspired by the compartmentalized organization of cells and organelles, lipid or polymer vesicles are widely used as model membrane systems to investigate the translocation of solutes and the transduction of signals by membrane proteins. The bottom-up assembly and functionalization of such artificial compartments enables full control over their composition and can thus provide specifically optimized environments for synthetic biological processes. This review aims to inspire future endeavors by providing a diverse toolbox of molecular modules, engineering methodologies, and different approaches to assemble artificial vesicular systems. Important technical and practical aspects are addressed and selected applications are presented, highlighting particular achievements and limitations of the bottom-up approach. Complementing the cutting-edge technological achievements, fundamental aspects are also discussed to cater to the inherently diverse background of the target audience, which results from the interdisciplinary nature of synthetic biology. The engineering of proteins as functional modules and the use of lipids and block copolymers as scaffold modules for the assembly of functionalized vesicular systems are explored in detail. Particular emphasis is placed on ensuring the controlled assembly of these components into increasingly complex vesicular systems. Finally, all descriptions are presented in the greater context of engineering valuable synthetic biological systems for applications in biocatalysis, biosensing, bioremediation, or targeted drug delivery.

Engineered P450 BM3 and cpADH5 coupled cascade reaction for β-oxo fatty acid methyl ester production in whole cells

Hydroxy- or ketone- functionalized fatty acid methyl esters (FAMEs) are important compounds for production of pharmaceuticals, vitamins, cosmetics or dietary supplements. Biocatalysis through enzymatic cascades has drawn attention to the efficient, sustainable, and greener synthetic processes. Furthermore, whole cell catalysts offer important advantages such as cofactor regeneration by cell metabolism, omission of protein purification steps and increased enzyme stability. Here, we report the first whole cell catalysis employing an engineered P450 BM3 variant and cpADH5 coupled cascade reaction for the biosynthesis of hydroxy- and keto-FAMEs. Firstly, P450 BM3 was engineered through the KnowVolution approach yielding P450 BM3 variant YE_M1_2, (R47S/Y51W/T235S/N239R/I401 M) which exhibited boosted performance toward methyl hexanoate. The initial oxidation rate of YE_M1_2 toward methyl hexanoate was determined to be 23-fold higher than the wild type enzyme and a 1.5-fold increase in methyl 3-hydroxyhexanoate production was obtained (YE_M1_2; 2.75 mM and WT; 1.8 mM). Subsequently, the whole cell catalyst for the synthesis of methyl 3-hydroxyhexanoate and methyl 3-oxohexanoate was constructed by combining the engineered P450 BM3 and cpADH5 variants in an artificial operon. A 2.06 mM total product formation was achieved by the whole cell catalyst including co-expressed channel protein, FhuA and co-solvent addition. Moreover, the generated whole cell biocatalyst also accepted methyl valerate, methyl heptanoate as well as methyl octanoate as substrates and yielded ω-1 ketones as the main product.

In Situ Monitoring of Membrane Protein Insertion into Block Copolymer Vesicle Membranes and Their Spreading via Potential-Assisted Approach

Synthosomes are polymer vesicles with transmembrane proteins incorporated into block copolymer membranes. They have been used for selective transport in or out of the vesicles as well as catalysis inside the compartments. However, both the insertion process of the membrane protein, forming nanopores, and the spreading of the vesicles on planar substrates to form solid-supported biomimetic membranes have been rarely studied yet. Herein, we address these two points and, first, shed light on the real-time monitoring of protein insertion via isothermal titration calorimetry. Second, the spreading process on different solid supports, namely, SiO₂, glass, and gold, via different techniques like spin- and dip-coating as well as a completely new approach of potential-assisted spreading on gold surfaces was studied. While inhomogeneous layers occur via traditional methods, our proposed potential-assisted strategy to induce adsorption of positively charged vesicles by applying negative potential on the electrode leads to remarkable vesicle spreading and their further fusion to form more homogeneous planar copolymer films on gold. The polymer vesicles in our study are formed from amphiphilic copolymers poly(2-methyl oxazoline)-block-poly(dimethylsiloxane)-block-poly(2-methyl oxazoline) (PMOXA-b-PDMS-b-PMOXA). Engineered variants of the transmembrane protein ferric hydroxamate uptake protein component A (FhuA), one of the largest β-barrel channel proteins, are used as model nanopores. The incorporation of FhuA Δ1-160 is shown to facilitate the vesicle spreading process further. Moreover, high accessibility of cysteine inside the channel was proven by linkage of a fluorescent dye inside the engineered variant FhuA ΔCVF^tev and hence preserved functionality of the channels after spreading. The porosity and functionality of the spread synthosomes on the gold plates have been examined by studying the passive ion transport response in the presence of Li⁺ and ClO₄^- ions and electrochemical impedance spectroscopy analysis. Our approach to form solid-supported biomimetic membranes via the potential-assisted strategy could be important for the development of new (bio-) sensors and membranes.

Manipulation of charge distribution in the arginine and glutamate clusters of the OmpG pore alters sugar specificity and ion selectivity

OmpG is a general diffusion pore in the E. coli outer membrane with a molecular architecture comprising a 14-stranded β-barrel scaffold and unique structural features. In contrast to other non-specific porins, OmpG lacks a central constriction zone and has an exceptionally wide pore diameter of about 13 Å. The equatorial plane of OmpG harbors an annulus of four alternating basic and acidic patches whose function is only poorly characterized. We have investigated the role of charge distribution for ion selectivity and sugar transport with the help of OmpG variants mutated in the annulus. Substituting the glutamate residues of the annulus for histidines or alanines led to a strong reduction in cation selectivity. Replacement of the glutamates in the annulus by histidine residues also disfavored the passage of pentoses and hexoses relative to disaccharides. Our results demonstrate that despite the wide pore diameter, an annulus only consisting of two opposing basic patches confers reduced cation and monosaccharide transport compared to OmpG wild type. Furthermore, randomization of charged residues in the annulus had the potential to abolish pH-dependency of sugar transport. Our results indicate that E¹⁵, E³¹, R⁹², R¹¹¹ and R²¹¹ in the annulus form electrostatic interactions with R²²⁸, E²²⁹ and D²³² in loop L6 that influence pH-dependency of sugar transport.

In-Situ Configuration Studies on Segmented DNA Origami Nanotubes

One-dimensional nanotubes are of considerable interest in materials and biochemical sciences. A particular desire is to create DNA nanotubes with user-defined structural features and biological relevance, which will facilitate the application of these nanotubes in the controlled release of drugs, templating of other materials into linear arrays and the construction of artificial membrane channels. However, little is known about the structures of assembled DNA nanotubes in solution. Here we report an in situ exploration of segmented DNA nanotubes, composed of multiple units with set length distributions, by using synchrotron small-angle X-ray scattering (SAXS). Through joint experimental and theoretical studies, we show that the SAXS data are highly informative in the context of heterogeneous mixtures of DNA nanotubes. The structural parameters obtained by SAXS are in good agreement with those determined by atomic force microscopy (AFM), transmission electron microscopy (TEM), and dynamic light scattering (DLS). In particular, the SAXS data revealed important structural information on these DNA nanotubes, such as the in-solution diameters (≈25 nm), which could be obtained only with difficulty by use of other methods. Our results establish SAXS as a reliable structural analysis method for long DNA nanotubes and could assist in the rational design of these structures.

Chiral separation of d/l-arginine with whole cells through an engineered FhuA nanochannel

Downstream processing to obtain enantiopure compounds from a racemic mixture relies mainly on crystallization. Natural transporters can specifically translocate enantiomers through membranes. Here a β-barrel transmembrane protein FhuA is re-engineered into a chiral channel protein (FhuAF4) to resolve racemic mixtures of d-/l-arginine. The engineered FhuAF4 variant exhibits an enantioselectivity (E-value) of 1.92 and an enantiomeric excess percentage (ee%) of 23.91 at 52.39% conversion. OmniChange mutant libraries at the computationally identified "filter-regions" likely help to identify FhuA variants for enantiomeric separation of other compounds.

A Nuclease Protection ELISA Assay for Colorimetric and Electrochemical Detection of Nucleic Acids

Early and accurate diagnosis is crucial to monitor infection outcomes and provide timely interventions. However, gold standard polymerase chain reaction assays (PCR) are labor-intensive and require expensive reagents and instrumentation. Nuclease protection has been used for decades to detect and quantify nucleic acid but has not yet been investigated as a diagnostic tool for infectious disease. In this work, we describe a nuclease protection enzyme-linked immunosorbent assay (NP-ELISA) for accurate and sensitive detection of nucleic acid. Briefly, binding of a nucleic acid target to an oligo probe protects it from digestion of un-hybridized nucleic acid by S1 nuclease. Following the workflow of an ELISA, a horseradish peroxidase (HRP)-conjugated antibody binds the probe and oxidizes its substrate to generate signal. The assay was validated with three HRP substrates for absorbance, chemiluminescence, and electrochemical readouts, demonstrating great versatility. Electrochemical detection with 3,3',5,5'-Tetramethylbenzidine (TMB) gave the highest assay sensitivity with a limit of detection of 3.72×103 molecules mL-1. Furthermore, non-complementary targets did not generate a response, indicating a high degree of specificity. This proof of principle serves as a stepping stone towards developing miniaturized, multiplexed nuclease protection assays for point-of-care diagnosis.

Light-Driven Biocatalysis in Liposomes and Polymersomes: Where Are We Now?

The utilization of light energy to power organic-chemical transformations is a fundamental strategy of the terrestrial energy cycle. Inspired by the elegance of natural photosynthesis, much interdisciplinary research effort has been devoted to the construction of simplified cell mimics based on artificial vesicles to provide a novel tool for biocatalytic cascade reactions with energy-demanding steps. By inserting natural or even artificial photosynthetic systems into liposomes or polymersomes, the light-driven proton translocation and the resulting formation of electrochemical gradients have become possible. This is the basis for the conversion of photonic into chemical energy in form of energy-rich molecules such as adenosine triphosphate (ATP), which can be further utilized by energy-dependent biocatalytic reactions, e.g. carbon fixation. This review compares liposomes and polymersomes as artificial compartments and summarizes the types of light-driven proton pumps that have been employed in artificial photosynthesis so far. We give an overview over the methods affecting the orientation of the photosystems within the membranes to ensure a unidirectional transport of molecules and highlight recent examples of light-driven biocatalysis in artificial vesicles. Finally, we summarize the current achievements and discuss the next steps needed for the transition of this technology from the proof-of-concept status to preparative applications.

Siver Nanoparticles Toxicity in Brine Shrimp and its Histopathological Analysis

Silver nanoparticles (Ag NPs) are interesting nanotechnology materials with borderless applications in medical science, environmental science, material science and are also used in various kinds of industrial household products. Increasing usage of Ag NPs every year leads to increased risk of nanomaterial contamination in the environment, especially natural water sources with harmful effects in aquatic animals, and to ecosystem disruption. In the present study, Ag NPs toxicity was determined using brine shrimp Artemia salina as a model. A total of 10 adult brine shrimps were incubated in solutions containing various Ag NPs concentrations for 24[Formula: see text]h at room temperature. Percentages of brine shrimp dead were recorded and calculated to determine the lethal concentration. We found the LC[Formula: see text] of Ag NPs is 3521.13[Formula: see text]mg/L. Histopathology study was done using survival brine shrimps after 24[Formula: see text]h of incubation with 25% LC[Formula: see text] Ag NPs concentration. Tissue processing and H&E staining to remark pathological areas with emphasis on intestinal tract, were also done. Ag NPs obstruction was found in intestinal lumen. The intestinal epithelial cells showed hyperplasia and blebbing, increased mucous thickening, detachment from basement muscle lining, and necrosis area. These findings indicated the effect of Ag NPs and their negative impact on aquatic animals which might lead to further disruption of ecosystem.

Biomimetic artificial organelles with in vitro and in vivo activity triggered by reduction in microenvironment

Despite tremendous efforts to develop stimuli-responsive enzyme delivery systems, their efficacy has been mostly limited to in vitro applications. Here we introduce, by using an approach of combining biomolecules with artificial compartments, a biomimetic strategy to create artificial organelles (AOs) as cellular implants, with endogenous stimuli-triggered enzymatic activity. AOs are produced by inserting protein gates in the membrane of polymersomes containing horseradish peroxidase enzymes selected as a model for natures own enzymes involved in the redox homoeostasis. The inserted protein gates are engineered by attaching molecular caps to genetically modified channel porins in order to induce redox-responsive control of the molecular flow through the membrane. AOs preserve their structure and are activated by intracellular glutathione levels in vitro. Importantly, our biomimetic AOs are functional in vivo in zebrafish embryos, which demonstrates the feasibility of using AOs as cellular implants in living organisms. This opens new perspectives for patient-oriented protein therapy.

The efficacy of stimuli-responsive enzyme delivery systems is usually limited to in vitro applications. Here the authors form artificial organelles by inserting stimuli-responsive protein gates in membranes of polymersomes loaded with enzymes and obtain a triggered functionality both in vitro and in vivo.

Tuning biomimetic membrane barrier properties by hydrocarbon, cholesterol and polymeric additives

The barrier properties of cellular membranes are increasingly attracting attention as a source of inspiration for designing biomimetic membranes. The broad range of potential technological applications makes the use of lipid and lately also polymeric materials a popular choice for constructing biomimetic membranes, where the barrier properties can be controlled by the composition of the membrane constituent elements. Here we investigate the membrane properties reported by the light-induced proton pumping activity of bacteriorhodopsin (bR) reconstituted in three vesicle systems of different membrane composition. Specifically we quantify how the resulting proton influx and efflux rates are influenced by the membrane composition using a variety of membrane modulators. We demonstrate that by adding hydrocarbons to vesicles with reconstituted bR formed from asolectin lipids the resulting transmembrane proton fluxes changes proportional to the carbon chain length when compared against control. We observe a similar proportionality in single-component 1,2-Dioleoyl-sn-glycero-3-phosphocholine model membranes when using cholesterol. Lastly we investigate the effects of adding the amphiphilic di-block co-polymer polybutadiene-polyethyleneoxide (PB₁₂-PEO₁₀) to phospholipid membranes formed from 1,2-Dioleoyl-sn-glycero-3-phosphocholine, 1,2-Dioleoyl-sn-glycero-3-phosphatidylethanolamine, and 1,2-Dioleoyl-sn-glycero-3-phosphatidylserine. The proton pumping activity of bR (measured as a change in extra-vesicular pH) in mixed lipid/PB₁₂-PEO₁₀ lipid systems is up to six-fold higher compared to that observed for bR containing vesicles made from PB₁₂-PEO₁₀ alone. Interestingly, bR inserts with apparent opposite orientation in pure PB₁₂-PEO₁₀ vesicles as compared to pure lipid vesicles. Addition of equimolar amounts of lipids to PB₁₂-PEO₁₀ results in bR orientation similar to that observed for pure lipids. In conclusion our results show how the barrier properties of the membranes can be controlled by the composition of the membrane. In particular the use of mixed lipid-polymer systems may pave the way for constructing biomimetic membranes tailored for optimal properties in various applications including drug delivery systems, biosensors and energy conservation technology.

Engineering Enhanced Pore Sizes Using FhuA Δ1-160 from E. coli Outer Membrane as Template

Biological membranes are the perfect example of a molecular filter using membrane channels to control the permeability of small water-soluble molecules. To allow filtering of larger hydrophilic molecules we started from the known mutant channel FhuA Δ1-160 in which the cork domain closing the channel had been removed. Here we further expand the pore diameter by copying the amino acid sequence of two β-strands in a stepwise manner increasing the total number of β-strands from 22 to 34. The pore size of the respective expanded channel protein was characterized by single-channel conductance. Insertion of additional β-strands increased the pore conductance but also induced more ion current flickering on the millisecond scale. Further, polymer exclusion measurements were performed by analyzing single-channel conductance in the presence of differently sized polyethylene glycol of known polymer random coil radii. The conclusion from channel conductance of small channel penetrating polymers versus larger excluded ones suggested an increase in pore radii from 1.6 nm for FhuA Δ1-160 up to a maximum of about 2.7 nm for +8 β insertion. Integration of more β-strand caused instability of the channel and exclusion of smaller sized polymer. FhuA Δ1-160 + 10 β and FhuA Δ1-160 + 12 β effective radius decreased to 1.4 and 1.3 nm, respectively, showing the limitations of this approach.

Overcoming the Incompatibility Challenge in Chemoenzymatic and Multi-Catalytic Cascade Reactions

Multi-catalytic cascade reactions bear a great potential to minimize downstream and purification steps, leading to a drastic reduction of the produced waste. In many examples, the compatibility of chemo- and biocatalytic steps could be easily achieved. Problems associated with the incompatibility of the catalysts and their reactions, however, are very frequent. Cascade-like reactions can hardly occur in this way. One possible solution to combine, in principle, incompatible chemo- and biocatalytic reactions is the defined control of the microenvironment by compartmentalization or scaffolding. Current methods for the control of the microenvironment of biocatalysts go far beyond classical enzyme immobilization and are thus believed to be very promising tools to overcome incompatibility issues and to facilitate the synthetic application of cascade reactions. In this Minireview, we will summarize recent synthetic examples of (chemo)enzymatic cascade reactions and outline promising methods for their spatial control either by using bio-derived or synthetic systems.

Biomimetic Strategy To Reversibly Trigger Functionality of Catalytic Nanocompartments by the Insertion of pH-Responsive Biovalves

We describe an innovative strategy to generate catalytic compartments with triggered functionality at the nanoscale level by combining pH-reversible biovalves and enzyme-loaded synthetic compartments. The biovalve has been engineered by the attachment of stimuli-responsive peptides to a genetically modified channel porin, enabling a reversible change of the molecular flow through the pores of the porin in response to a pH change in the local environment. The biovalve functionality triggers the reaction inside the cavity of the enzyme-loaded compartments by switching the in situ activity of the enzymes on/off based on a reversible change of the permeability of the membrane, which blocks or allows the passage of substrates and products. The complex functionality of our catalytic compartments is based on the preservation of the integrity of the compartments to protect encapsulated enzymes. An increase of the in situ activity compared to that of the free enzyme and a reversible on/off switch of the activity upon the presence of a specific stimulus is achieved. This strategy provides straightforward solutions for the development of catalytic nanocompartments efficiently producing desired molecules in a controlled, stimuli-responsive manner with high potential in areas, such as medicine, analytical chemistry, and catalysis.

Durable vesicles for reconstitution of membrane proteins in biotechnology

The application of membrane proteins in biotechnology requires robust, durable reconstitution systems that enhance their stability and support their functionality in a range of working environments. Vesicular architectures are highly desirable to provide the compartmentalisation to utilise the functional transmembrane transport and signalling properties of membrane proteins. Proteoliposomes provide a native-like membrane environment to support membrane protein function, but can lack the required chemical and physical stability. Amphiphilic block copolymers can also self-assemble into polymersomes: tough vesicles with improved stability compared with liposomes. This review discusses the reconstitution of membrane proteins into polymersomes and the more recent development of hybrid vesicles, which blend the robust nature of block copolymers with the biofunctionality of lipids. These novel synthetic vesicles hold great promise for enabling membrane proteins within biotechnologies by supporting their enhanced in vitro performance and could also contribute to fundamental biochemical and biophysical research by improving the stability of membrane proteins that are challenging to work with.

Elucidating Protein Involvement in the Stabilization of the Biogenic Silver Nanoparticles

Silver nanoparticles (AgNPs) have been broadly used as antibacterial and antiviral agents. Further, interests for green AgNP synthesis have increased in recent years and several results for AgNP biological synthesis have been reported using bacteria, fungi and plant extracts. The understanding of the role and nature of fungal proteins, their interaction with AgNPs and the subsequent stabilization of nanosilver is yet to be deeply investigated. Therefore, in an attempt to better understand biogenic AgNP stabilization with the extracellular fungal proteins and to describe these supramolecular interactions between proteins and silver nanoparticles, AgNPs, produced extracellularly by Aspergillus tubingensis-isolated as an endophytic fungus from Rizophora mangle-were characterized in order to study their physical characteristics, identify the involved proteins, and shed light into the interactions among protein-NPs by several techniques. AgNPs of around 35 nm in diameter as measured by TEM and a positive zeta potential of +8.48 mV were obtained. These AgNPs exhibited a surface plasmon resonance (SPR) band at 440 nm, indicating the nanoparticles formation, and another band at 280 nm, attributed to the electronic excitations in tryptophan, tyrosine, and/or phenylalanine residues in fungal proteins. Fungal proteins were covalently bounded to the AgNPs, mainly through S-Ag bonds due to cysteine residues (HS-) and with few N-Ag bonds from H2N- groups, as verified by Raman spectroscopy. Observed supramolecular interactions also occur by electrostatic and other protein-protein interactions. Furthermore, proteins that remain free on AgNP surface may perform hydrogen bonds with other proteins or water increasing thus the capping layer around the AgNPs and consequently expanding the hydrodynamic diameter of the particles (~264 nm, measured by DLS). FTIR results enabled us to state that proteins adsorbed to the AgNPs did not suffer relevant secondary structure alteration upon their physical interaction with the AgNPs or when covalently bonded to them. Eight proteins in the AgNP dispersion were identified by mass spectrometry analyses. All these proteins are involved in metabolic pathways of the fungus and are important for carbon, phosphorous and nitrogen uptake, and for the fungal growth. Thereby, important proteins for fungi are also involved in the formation and stabilization of the biogenic AgNPs.

Outer membrane protein design

Membrane proteins are the gateway to the cell. These proteins are also a control center of the cell, as information from the outside is passed through membrane proteins as signals to the cellular machinery. The design of membrane proteins seeks to harness the power of these gateways and signal carriers. This review will focus on the design of the membrane proteins that are in the outer membrane, a membrane which only exists for gram negative bacteria, mitochondria, and chloroplasts. Unlike other membrane proteins, outer membrane proteins are uniquely shaped as β-barrels. Herein, I describe most known examples of membrane β-barrel design to date, focusing particularly on categorizing designs as: Firstly, structural deconstruction; secondly, structural changes; thirdly, chemical function design; and finally, the creation of new folds.

Grafting PNIPAAm from β-barrel shaped transmembrane nanopores

The research on protein-polymer conjugates by grafting from the surface of proteins has gained significant interest in the last decade. While there are many studies with globular proteins, membrane proteins have remained untouched to the best of our knowledge. In this study, we established the conjugate formation with a class of transmembrane proteins and grow polymer chains from the ferric hydroxamate uptake protein component A (FhuA; a β-barrel transmembrane protein of Escherichia coli). As the lysine residues of naturally occurring FhuA are distributed over the whole protein, FhuA was reengineered to have up to 11 lysines, distributed symmetrically in a rim on the membrane exposed side (outside) of the protein channel and exclusively above the hydrophobic region. Reengineering of FhuA ensures a polymer growth only on the outside of the β-barrel and prevents blockage of the channel as a result of the polymerization. A water-soluble initiator for controlled radical polymerization (CRP) was consecutively linked to the lysine residues of FhuA and N-isopropylacrylamide (NIPAAm) polymerized under copper-mediated CRP conditions. The conjugate formation was analyzed by using MALDI-ToF mass spectrometry, SDS-PAGE, circular dichroism spectroscopy, analytical ultracentrifugation, dynamic light scattering, transmission electron microscopy and size exclusion chromatography. Such conjugates combine the specific functions of the transmembrane proteins, like maintaining membrane potential gradients or translocation of substrates with the unique properties of synthetic polymers such as temperature and pH stimuli handles. FhuA-PNIPAAm conjugates will serve as functional nanosized building blocks for applications in targeted drug delivery, self-assembly systems, functional membranes and transmembrane protein gated nanoreactors.

Dynamics of Membrane Proteins within Synthetic Polymer Membranes with Large Hydrophobic Mismatch

The functioning of biological membrane proteins (MPs) within synthetic block copolymer membranes is an intriguing phenomenon that is believed to offer great potential for applications in life and medical sciences and engineering. The question why biological MPs are able to function in this completely artificial environment is still unresolved by any experimental data. Here, we have analyzed the lateral diffusion properties of different sized MPs within poly(dimethylsiloxane) (PDMS)-containing amphiphilic block copolymer membranes of membrane thicknesses between 9 and 13 nm, which results in a hydrophobic mismatch between the membrane thickness and the size of the proteins of 3.3-7.1 nm (3.5-5 times). We show that the high flexibility of PDMS, which provides membrane fluidities similar to phospholipid bilayers, is the key-factor for MP incorporation.

Prediction and design of outer membrane protein-protein interactions

Protein-protein interactions (PPI) play central roles in biological processes, motivating us to understand the structural basis underlying affinity and specificity. In this chapter, we focus on biochemical and computational design strategies of assessing and detecting PPIs of β-barrel outer membrane proteins (OMPs). A few case studies are presented highlighting biochemical techniques used to dissect the energetics of oligomerization and determine amino acids forming the key interactions of the PPI sites. Current computational strategies for detecting/predicting PPIs are introduced, and examples of computational and rational engineering strategies applied to OMPs are presented.

Silver as antibacterial agent: ion, nanoparticle, and metal

The antibacterial action of silver is utilized in numerous consumer products and medical devices. Metallic silver, silver salts, and also silver nanoparticles are used for this purpose. The state of research on the effect of silver on bacteria, cells, and higher organisms is summarized. It can be concluded that the therapeutic window for silver is narrower than often assumed. However, the risks for humans and the environment are probably limited.

First insights on organic cosolvent effects on FhuA wildtype and FhuA Δ1-159

Circular dichroism (CD) and deconvolution were used to study the structural integrity of a "plugged" and an "open" FhuA transmembrane channel protein in the presence of varied concentrations of tetrahydrofuran (THF), ethanol (EtOH) and chloroform/methanol (C/M). FhuA is an Escherichia coli outer membrane protein (78.9 kDa) consisting of 22 β-sheets and an internal globular cork domain which acts as an iron transporter. FhuA and the deletion variant FhuA Δ1-159 showed comparable and remarkable resistance in the presence of THF (≤40 vol%) and EtOH (≤10 vol%). In C/M, significant differences in structural resistance were observed (FhuA stable ≤10 vol%; FhuA Δ1-159 ≤1 vol%). Deconvolution of CD-spectra for FhuA and FhuA Δ1-159 yielded β-sheet contents of 61 % (FhuA) and 58% (FhuA Δ1-159). Interestingly, FhuA and FhuA Δ1-159 had comparable β-sheet contents in the presence and absence of all three organic cosolvents. Additionally, precipitated FhuA and FhuA Δ1-159 (in 40 vol% C/M or 65 vol% THF) redissolved by supplementing the detergent n-octyl-oligo-oxyethylene (oPOE).

Structural and dynamical analysis of an engineered FhuA channel protein embedded into a lipid bilayer or a detergent belt

Engineered channel proteins are promising nano-components with applications in nanodelivery and nanoreactors technology. Because few of the engineered channel proteins have been crystallized, solution studies based on Neutron Scattering, Circular Dichroism and NMR play a major role. Consequently, the understanding of membrane proteins dynamics in water/detergent solutions or when embedded in a lipid membrane, can clarify how the environment affects protein behavior. In this study, molecular dynamics simulations of the FhuA Escherichia coli outer membrane channel protein and its engineered FhuA Δ1-159 variant have been performed in two different environments: a DNPC (1,2-dinervonyl-sn-glycero-3-phosphocholine) lipid bilayer and a water/OES (N-octyl-2-hydroxyethyl sulfoxide) detergent solution. Furthermore the FhuA Δ1-159 variant has been simulated in the open and closed states, the last induced by the presence of six 3-(2-pyridyldithio)-propionic-acid in the channel inner core. Differences in protein structural and dynamical behavior between the two environments have been found. Considering the FhuA protein characterized by an elliptical-cylindrical symmetry: (a) neither variations on the secondary structure nor axial deformation have been observed in any of the systems; (b) the ellipticity of the channel section (open state) and its fluctuations are enhanced in presence of water/OES, while diminished or suppressed in the DNPC bilayer; (c) the insertion of hydrophobic pyridyl groups into the FhuA Δ1-159 channel (closed state) induces a higher ellipticity in water/OES solution, while shifting to a circular section in the DNPC membrane; (d) the cork domain represented by the first 159 amino acids does not play a major role for protein stability.

A knowledge-based potential highlights unique features of membrane α-helical and β-barrel protein insertion and folding

Outer membrane β-barrel proteins differ from α-helical inner membrane proteins in lipid environment, secondary structure, and the proposed processes of folding and insertion. It is reasonable to expect that outer membrane proteins may contain primary sequence information specific for their folding and insertion behavior. In previous work, a depth-dependent insertion potential, E(z) , was derived for α-helical inner membrane proteins. We have generated an equivalent potential for TM β-barrel proteins. The similarities and differences between these two potentials provide insight into unique aspects of the folding and insertion of β-barrel membrane proteins. This potential can predict orientation within the membrane and identify functional residues involved in intermolecular interactions.

Computational studies of membrane proteins: models and predictions for biological understanding

We discuss recent progresses in computational studies of membrane proteins based on physical models with parameters derived from bioinformatics analysis. We describe computational identification of membrane proteins and prediction of their topology from sequence, discovery of sequence and spatial motifs, and implications of these discoveries. The detection of evolutionary signal for understanding the substitution pattern of residues in the TM segments and for sequence alignment is also discussed. We further discuss empirical potential functions for energetics of inserting residues in the TM domain, for interactions between TM helices or strands, and their applications in predicting lipid-facing surfaces of the TM domain. Recent progresses in structure predictions of membrane proteins are also reviewed, with further discussions on calculation of ensemble properties such as melting temperature based on simplified state space model. Additional topics include prediction of oligomerization state of membrane proteins, identification of the interfaces for protein-protein interactions, and design of membrane proteins. This article is part of a Special Issue entitled: Protein Folding in Membranes.

Engineering of an E. coli outer membrane protein FhuA with increased channel diameter

Background

Channel proteins like FhuA can be an alternative to artificial chemically synthesized nanopores. To reach such goals, channel proteins must be flexible enough to be modified in their geometry, i.e. length and diameter. As continuation of a previous study in which we addressed the lengthening of the channel, here we report the increasing of the channel diameter by genetic engineering.

Results

The FhuA Δ1-159 diameter increase has been obtained by doubling the amino acid sequence of the first two N-terminal β-strands, resulting in variant FhuA Δ1-159 Exp. The total number of β-strands increased from 22 to 24 and the channel surface area is expected to increase by ~16%. The secondary structure analysis by circular dichroism (CD) spectroscopy shows a high β-sheet content, suggesting the correct folding of FhuA Δ1-159 Exp. To further prove the FhuA Δ1-159 Exp channel functionality, kinetic measurement using the HRP-TMB assay (HRP = Horse Radish Peroxidase, TMB = 3,3',5,5'-tetramethylbenzidine) were conducted. The results indicated a 17% faster diffusion kinetic for FhuA Δ1-159 Exp as compared to FhuA Δ1-159, well correlated to the expected channel surface area increase of ~16%.

Conclusion

In this study using a simple "semi rational" approach the FhuA Δ1-159 diameter was enlarged. By combining the actual results with the previous ones on the FhuA Δ1-159 lengthening a new set of synthetic nanochannels with desired lengths and diameters can be produced, broadening the FhuA Δ1-159 applications. As large scale protein production is possible our approach can give a contribution to nanochannel industrial applications.