Competitive DNA transfection formulation via electroporation for human adipose stem cells and mesenchymal stem cells

Non-viral gene delivery to human mesenchymal stem cells: a practical guide towards cell engineering

In recent decades, human mesenchymal stem cells (hMSCs) have gained momentum in the field of cell therapy for treating cartilage and bone injuries. Despite the tri-lineage multipotency, proliferative properties, and potent immunomodulatory effects of hMSCs, their clinical potential is hindered by donor variations, limiting their use in medical settings. To address this challenge, gene delivery technologies have emerged as a promising approach to modulate the phenotype and commitment of hMSCs towards specific cell lineages, thereby enhancing osteochondral repair strategies. This review provides a comprehensive overview of current non-viral gene delivery approaches used to engineer MSCs, highlighting key factors such as the choice of nucleic acid or delivery vector, transfection strategies, and experimental parameters. Additionally, it outlines various protocols and methods for qualitative and quantitative evaluation of their therapeutic potential as a delivery system in osteochondral regenerative applications. In summary, this technical review offers a practical guide for optimizing non-viral systems in osteochondral regenerative approaches. hMSCs constitute a key target population for gene therapy techniques. Nevertheless, there is a long way to go for their translation into clinical treatments. In this review, we remind the most relevant transfection conditions to be optimized, such as the type of nucleic acid or delivery vector, the transfection strategy, and the experimental parameters to accurately evaluate a delivery system. This survey provides a practical guide to optimizing non-viral systems for osteochondral regenerative approaches.

Electroporation: A Sustainable and Cell Biology Preserving Cell Labeling Method for Adipogenous Mesenchymal Stem Cells

Human mesenchymal stem cells derived from adipose tissue (AD-hMSCs) represent a promising source for tissue engineering and are already widely used in cell therapeutic clinical trials. Until today, an efficient and sustainable cell labeling system for cell tracking does not exist. We evaluated transient transfection through electroporation for cell labeling and compared it with lentiviral transduction for AD-hMSCs. In addition, we tested whether nonsense DNA or a reporter gene such as enhanced green fluorescent protein (EGFP) is the more suitable label for AD-hMSCs. Using electroporation, the transfection efficiency reached a maximal level of 44.6 ± 1.1% EGFP-positive cells after selective and expansive cultivation of the mixed MSC population, and was 44.5 ± 1.4% after gene transfer with Cyanin3-marked nonsense-label DNA, which remained stable during 2 weeks of nonselective cultivation (37.2 ± 4.7% positive AD-hMSCs). Electroporation with both nonsense DNA and pEGFP-N1 led to a slight growth retardation of 45.2% and 59.1%, respectively. EGFP-transfected or transduced AD-hMSCs showed a limited adipogenic and osteogenic differentiation capacity, whereas it was almost unaffected in cells electroporated with the nonsense-label DNA. The nonsense DNA was detectable through quantitative real-time polymerase chain reaction for at least 5 weeks/10 passages and in differentiated AD-hMSCs. EGFP-labeled cells were trackable for 24 h in vitro and served as testing cells with new materials for dental implants for 7 days. In contrast, lentivirally transduced AD-hMSCs showed an altered natural immune phenotype of the AD-hMSCs with lowered expression of two cell type defining surface markers (CD44 and CD73) and a relevantly decreased cell growth by 71.8% as assessed by the number of colony-forming units. We suggest electroporation with nonsense DNA as an efficient and long-lasting labeling method for AD-hMSCs with the comparably lowest negative impact on the phenotype or the differentiation capacity of the cells, which may, therefore, be suitable for tissue engineering. In contrast, EGFP transfection by electroporation is efficient but may be more suitable for cell tracking within cell therapies without MSC differentiation procedures. Since current protocols of lentiviral gene transduction include the risk of cell biological alterations, electroporation seems advantageous and sustainable enough for hMSC labeling.

Comparison of Different Electroporation Parameters on Transfection Efficiency of Sheep Testicular Cells

OBJECTIVE

Electroporation can be a highly efficient method for introducing the foreign genetic materials into the targeted cells for transient and/or permanent genetic modification. Considering the application of this technique as a very efficient method for drug, oligonucleotide, antibody and plasmid delivery for clinical applications and production of transgenic animals, the present study aimed to optimize the transfection efficiency of sheep testicular cells including spermatogonial stem cells (SSCs) via electroporation.

MATERIALS AND METHODS

This study is an experimental research conducted in Biotechnology Research Center (Avicenna Research Institute, Tehran, Iran) from September 2013 to March 2014. Following isolation and propagation of one-month lamb testicular cells (SSCs and somatic testicular cells including; Sertoli, Leydig, and myoid cells), the effect of different electroporation parameters including total voltages (280, 320, and 350 V), burst durations (10, 8, and 5 milliseconds), burst modes (single or double) and addition of dimethyl sulfoxide (DMSO) were evaluated on transfection efficiency, viability rate and mean fluorescent intensity (MFI) of sheep testicular cells.

RESULTS

The most transfection efficiency was obtained in 320 V/8 milliseconds/single burst group in transduction medium with and without DMSO. There was a significantly inverse correlation between transfection efficiency with application of both following parameters: addition of DMSO and double burst. After transfection, the highest and lowest viability rates of testicular cells were demonstrated in 320 V/8 milliseconds with transduction medium without DMSO and 350 V/5 milliseconds in medium containing DMSO. Ad- dition of DMSO to transduction medium in all groups significantly decreased the viability rate. The comparison of gene expression indicated that Sertoli and SSCs had the most fluorescence intensity in 320 V/double burst/DMSO positive. However, myoid and Leydig cells showed the maximum expression in 320 V/single burst and/or 350 V/double burst/ DMSO positive.

CONCLUSION

We optimized the electroporation method for transfection of sheep testicular cells and recommended the application of 320 V/8 milliseconds/single pulse/DMSO negative for transduction of plasmid vector into these cells. Among testicular cells, the most external gene expression was demonstrated in SSC population.

Single-step electrical field strength screening to determine electroporation induced transmembrane transport parameters

The design of effective electroporation protocols for molecular delivery applications requires the determination of transport parameters including diffusion coefficient, membrane resealing, and critical electric field strength for electroporation. The use of existing technologies to determine these parameters is time-consuming and labor-intensive, and often results in large inconsistencies in parameter estimation due to variations in the protocols and setups. In this work, we suggest using a set of concentric electrodes to screen a full range of electric field strengths in a single test to determine the electroporation-induced transmembrane transport parameters. Using Calcein as a fluorescent probe, we developed analytical methodology to determine the transport parameters based on the electroporation-induced pattern of fluorescence loss from cells. A monolayer of normal human dermal fibroblast (NHDF) cells were pre-loaded with Calcein and electroporated with an applied voltage of 750V with 10 and 50 square pulses with 50μs duration. Using our analytical model, the critical electric field strength for electroporation was found for the 10 and 50 pulses experiments. An inverse correlation between the field strength and the molecular transport time decay constant, and a direct correlation between field strength and the membrane permeability were observed. The results of this work can simplify the development of electroporation-assisted technologies for research and therapies.

Efficient, Low-Cost Nucleofection of Passaged Chondrocytes

Nucleofection of chondrocytes has been shown to be an adequate method of transfection. Using Amaxa's nucleofection system, transfection efficiencies up to 89% were achievable for vector (pmaxGFP) and 98% for siRNA (siGLO) into passaged chondrocytes. However, such methods rely on costly commercial kits with proprietary reagents limiting its use in basic science labs and in clinical translation. Bovine-passaged chondrocytes were plated in serum reduced media conditionsand then nucleofected using various in laboratory-produced buffers. Cell attachment, confluency, viability, and transfection efficiency was assessed following nucleofection. For each parameter the buffers were scored and a final rank for each buffer was determined. Buffer denoted as 1M resulted in no significant difference for cell attachment, confluency, and viability as compared to non-nucleofected controls. Nucleofection in 1M buffer, in the absence of DNA vectors, resulted in increased col2, ki67, ccnd1 mRNA levels, and decreased col1 mRNA levels at 4 days of culture. Flow cytometry revealed that the transfection efficiency of 1M buffer was comparable to that obtained using the Amaxa commercial kit. siRNA designed against lamin A/C resulted in an average reduction of lamin A and C proteins to 19% and 8% of control levels, respectively. This study identifies a cost-effective, efficient method of nonviral nucleofection of bovine-passaged chondrocytes using known buffer formulations. Human-passaged chondrocytes could also be successfully nucleofected in 1M buffer. Thus this method should facilitate cost-efficient gene targeting of cells used for articular cartilage repair in a research setting.

The impact of non-electrical factors on electrical gene transfer

Electrical pulses directly and effectively boost both in vitro and in vivo gene transfer, but this process is greatly affected by non-electrical factors that exist during electroporation. These factors include, but are not limited to, the types of cells or tissues used, property of DNA, DNA formulation, and expressed protein. In this mini-review, we only describe and discuss a summary of DNA properties and selected DNA formulations on gene transfer via electroporation. The properties of DNA were selected for review because a substantial amount of remarkable work has been performed during the past few years but has received less notice than other works, although DNA properties appear to be critical for boosting electroporation delivery. The selected formulations will be covered in this mini-review because we are only interested in the simple formulations that could be used for cell or gene therapy via electroporation. Plus, there was an extensive review of DNA formulations in the first edition of this book. The formulations discussed in this mini-review represent novel developments in recent years and may impact electroporation significantly. These advancements in DNA formulations could prove to be important for gene delivery and disease treatment.

"Strategic sequences" in adipose-derived stem cell nerve regeneration

BACKGROUND

Peripheral nerve injuries (PNI) are a major source of morbidity worldwide. The development of cellular regenerative therapies has the potential to improve outcomes of nerve injuries. However, an ideal therapy has yet to be found. The purpose of this study is to examine the current literature key points of regenerative techniques using human adipose-derived stem cells (hADSCs) for nerve regeneration and derive a comprehensive approach to hADSC therapy for PNI.

METHODS

A literature review was conducted using the electronic database PubMed to search for current experimental approaches to repairing PNI using hADSCs. Key search elements focused on specific components of nerve regeneration paradigms, including (1) support cells, (2) scaffolds, and (3) nerve conduits.

RESULTS

Strategic sequences were developed by optimizing the components of different experimental regenerative therapies. These sequences focus on priming hADSCs within a specialized growth medium, a hydrogel matrix base, and a collagen nerve conduit to achieve neuromodulatory nerve regeneration. hADSCs may exert their neuroregenerative influence through paracrine effects on surrounding Schwann cells in addition to physical interactions with injured tissue.

CONCLUSIONS

hADSCs may play a key role in nerve regeneration by acting primarily as support for local neurotrophic mediation and modulation of nerve growth rather than that of a primary neuronal differentiation agent.

Direct head-to-head comparison of cationic liposome-mediated gene delivery to mesenchymal stem/stromal cells of different human sources: a comprehensive study

Nonviral gene delivery to human mesenchymal stem/stromal cells (MSC) can be considered a very promising strategy to improve their intrinsic features, amplifying the therapeutic potential of these cells for clinical applications. In this work, we performed a comprehensive comparison of liposome-mediated gene transfer efficiencies to MSC derived from different human sources-bone marrow (BM MSC), adipose tissue-derived cells (ASC), and umbilical cord matrix (UCM MSC). The results obtained using a green fluorescent protein (GFP)-encoding plasmid indicated that MSC isolated from BM and UCM are more amenable to genetic modification when compared to ASC as they exhibited superior levels of viable, GFP(+) cells 48 hr post-transfection, 58 ± 7.1% and 54 ± 3.8%, respectively, versus 33 ± 4.7%. For all cell sources, high cell recoveries (≈50%) and viabilities (>85%) were achieved, and the transgene expression was maintained for 10 days. Levels of plasmid DNA uptake, as well as kinetics of transgene expression and cellular division, were also determined. Importantly, modified cells were found to retain their characteristic immunophenotypic profile and multilineage differentiation capacity. By using the lipofection protocol optimized herein, we were able to maximize transfection efficiencies to human MSC (maximum of 74% total GFP(+) cells) and show that lipofection is a promising transfection strategy for MSC genetic modification, especially when a transient expression of a therapeutic gene is required. Importantly, we also clearly demonstrated that intrinsic features of MSC from different sources should be taken into consideration when developing and optimizing strategies for MSC engineering with a therapeutic gene.

Physical non-viral gene delivery methods for tissue engineering

The integration of gene therapy into tissue engineering to control differentiation and direct tissue formation is not a new concept; however, successful delivery of nucleic acids into primary cells, progenitor cells, and stem cells has proven exceptionally challenging. Viral vectors are generally highly effective at delivering nucleic acids to a variety of cell populations, both dividing and non-dividing, yet these viral vectors are marred by significant safety concerns. Non-viral vectors are preferred for gene therapy, despite lower transfection efficiencies, and possess many customizable attributes that are desirable for tissue engineering applications. However, there is no single non-viral gene delivery strategy that "fits-all" cell types and tissues. Thus, there is a compelling opportunity to examine different non-viral vectors, especially physical vectors, and compare their relative degrees of success. This review examines the advantages and disadvantages of physical non-viral methods (i.e., microinjection, ballistic gene delivery, electroporation, sonoporation, laser irradiation, magnetofection, and electric field-induced molecular vibration), with particular attention given to electroporation because of its versatility, with further special emphasis on Nucleofection™. In addition, attributes of cellular character that can be used to improve differentiation strategies are examined for tissue engineering applications. Ultimately, electroporation exhibits a high transfection efficiency in many cell types, which is highly desirable for tissue engineering applications, but electroporation and other physical non-viral gene delivery methods are still limited by poor cell viability. Overcoming the challenge of poor cell viability in highly efficient physical non-viral techniques is the key to using gene delivery to enhance tissue engineering applications.