Cyanobacterial biomass as carbohydrate and nutrient feedstock for bioethanol production by yeast fermentation

Role of cultivation parameters in carbohydrate accretion for production of bioethanol and C-phycocyanin from a marine cyanobacterium Leptolyngbya valderiana BDU 41001: A sustainable approach

The investigation aimed to augment carbohydrate accumulation in the marine cyanobacterium Leptolyngbya valderiana BDU 41001 to facilitate bioethanol production. Under the standardised physiochemical condition (SPC), i.e. 90 µmol photon m-2 s-1 light intensity, initial culture pH 8.5, 35 °C temperature and mixing at 150 rpm increased the carbohydrate productivity ∼70 % than the control, while a 47 % rise in content was obtained under the nitrate (N)-starved condition. Therefore, a two-stage cultivation strategy was implemented, combining SPC at the 1st stage and N starvation at the 2nd stage, resulting in 80 % augmentation of carbohydrate yield, which enhanced the bioethanol yield by ∼86 % as compared to the control employing immobilised yeast fermentation. Moreover, biomass utilisation was maximised by extracting C-phycocyanin, where a ∼77 % rise in productivity was recorded under the SPC. This study highlights the potential of L. valderiana for pilot-scale biorefinery applications, advancing the understanding of sustainable biofuel production.

Shedding light on blue-green photosynthesis: A wavelength-dependent mathematical model of photosynthesis in Synechocystis sp. PCC 6803

Cyanobacteria hold great potential to revolutionize conventional industries and farming practices with their light-driven chemical production. To fully exploit their photosynthetic capacity and enhance product yield, it is crucial to investigate their intricate interplay with the environment including the light intensity and spectrum. Mathematical models provide valuable insights for optimizing strategies in this pursuit. In this study, we present an ordinary differential equation-based model for the cyanobacterium Synechocystis sp. PCC 6803 to assess its performance under various light sources, including monochromatic light. Our model can reproduce a variety of physiologically measured quantities, e.g. experimentally reported partitioning of electrons through four main pathways, O2 evolution, and the rate of carbon fixation for ambient and saturated CO2. By capturing the interactions between different components of a photosynthetic system, our model helps in understanding the underlying mechanisms driving system behavior. Our model qualitatively reproduces fluorescence emitted under various light regimes, replicating Pulse-amplitude modulation (PAM) fluorometry experiments with saturating pulses. Using our model, we test four hypothesized mechanisms of cyanobacterial state transitions for ensemble of parameter sets and found no physiological benefit of a model assuming phycobilisome detachment. Moreover, we evaluate metabolic control for biotechnological production under diverse light colors and irradiances. We suggest gene targets for overexpression under different illuminations to increase the yield. By offering a comprehensive computational model of cyanobacterial photosynthesis, our work enhances the basic understanding of light-dependent cyanobacterial behavior and sets the first wavelength-dependent framework to systematically test their producing capacity for biocatalysis.

Engineered Chlorella vulgaris improves bioethanol production and promises prebiotic application

Microalgal biomass for biofuel production, integration into functional food, and feed supplementation has generated substantial interest worldwide due to its high growth rate, non-competitiveness for agronomic land, ease of cultivation in containments, and presence of several bioactive molecules. In this study, genetic engineering tools were employed to develop transgenic lines of freshwater microalga Chlorella vulgaris with a higher starch content, by up-regulating ADP-glucose pyrophosphorylase (AGPase), which is a rate-limiting enzyme in starch biosynthesis. Expression of the Escherichia coli glgC (AGPase homolog) gene in C. vulgaris led to an increase in total carbohydrate content up to 45.1% (dry cell weight, DCW) in the transgenic line as compared to 34.2% (DCW) in the untransformed control. The starch content improved up to 16% (DCW) in the transgenic alga compared to 10% (DCW) in the control. However, the content of total lipid, carotenoid, and chlorophyll decreased differentially in the transgenic lines. The carbohydrate-rich biomass from the transgenic algal line was used to produce bioethanol via yeast fermentation, which resulted in a higher ethanol yield of 82.82 mg/L as compared to 54.41 mg/L from the untransformed control. The in vitro digestibility of the transgenic algal starch revealed a resistant starch content of up to 7% of total starch. Faster growth of four probiotic bacterial species along with a lowering of the pH of the growth medium indicated transgenic alga to exert a positive prebiotic effect. Taken together, the study documents the utilization of genetically engineered C. vulgaris with enriched carbohydrates as bioethanol feedstock and functional food ingredients.

Microbial Diversity Associated with the Cabernet Sauvignon Carposphere (Fruit Surface) from Eight Vineyards in Henan Province, China

The microbial diversity on the carposphere (berry) surface of the grape cultivar Cabernet Sauvignon grown in eight different locations/vineyards of Henan Province was determined by high-throughput sequencing of the bacterial 16S rRNA gene and fungal 18S rRNA gene. The structure of bacterial and fungal communities varied according to the sampling sites, but with some common phyla. Proteobacteria and Ascomycota were dominant/common phyla for bacteria and fungi, respectively. A total of 27 and 20 bacterial and fungal families, respectively, and 39 and 20 bacterial and fungal genera, respectively, with statistically significant differences, were found among different sampling sites. The difference for metabolic pathways of bacteria among the sampling sites existed. In addition, various abundances of enzymes from different sites might indicate that different function patterns exist in microbiota from different sites. The results revealed that locations of grape vineyards might play a significant role in shaping the microbiome, as well as the fact that vineyards can be distinguished based on the abundance of several key bacterial and fungal taxa. Overall, these findings extend our understanding of the similarities and differences in microbial community and their metabolic function on Cabernet Sauvignon grape surfaces from different geographic locations.

Coupling dairy wastewaters for nutritional balancing and water recycling: sustainable heterologous 2-phenylethanol production by engineered cyanobacteria

Microalgae biotechnology is hampered by the high production costs and the massive usage of water during large-volume cultivations. These drawbacks can be softened by the production of high-value compounds and by adopting metabolic engineering strategies to improve their performances and productivity. Today, the most sustainable approach is the exploitation of industrial wastewaters for microalgae cultivation, which couples valuable biomass production with water resource recovery. Among the food processing sectors, the dairy industry generates the largest volume of wastewaters through the manufacturing process. These effluents are typically rich in dissolved organic matter and nutrients, which make it a challenging and expensive waste stream for companies to manage. Nevertheless, these rich wastewaters represent an appealing resource for microalgal biotechnology. In this study, we propose a sustainable approach for high-value compound production from dairy wastewaters through cyanobacteria. This strategy is based on a metabolically engineered strain of the model cyanobacterium Synechococcus elongatus PCC 7942 (already published elsewhere) for 2-phenylethanol (2-PE). 2-PE is a high-value aromatic compound that is widely employed as a fragrance in the food and cosmetics industry thanks to its pleasant floral scent. First, we qualitatively assessed the impact of four dairy effluents on cyanobacterial growth to identify the most promising substrates. Both tank-washing water and the liquid effluent of exhausted sludge resulted as suitable nutrient sources. Thus, we created an ideal buffer system by combining the two wastewaters while simultaneously providing balanced nutrition and completely avoiding the need for fresh water. The combination of 75% liquid effluent of exhausted sludge and 25% tank-washing water with a fine-tuning ammonium supplementation yielded 180 mg L-1 of 2-PE and a biomass concentration of 0.6 gDW L-1 within 10 days. The mixture of 90% exhausted sludge and 10% washing water produced the highest yield of 2-PE (205 mg L-1) and biomass accumulation (0.7 gDW L-1), although in 16 days. Through these treatments, the phosphates were completely consumed, and nitrogen was removed in a range of 74%-77%. Overall, our approach significantly valorized water recycling and the exploitation of valuable wastewaters to circularly produce marketable compounds via microalgae biotechnology, laying a promising groundwork for subsequent implementation and scale-up.

Marine cyanobacterial biomass is an efficient feedstock for fungal bioprocesses

BACKGROUND

Marine cyanobacteria offer many sustainability advantages, such as the ability to fix atmospheric CO2, very fast growth and no dependence on freshwater for culture. Cyanobacterial biomass is a rich source of sugars and proteins, two essential nutrients for culturing any heterotroph. However, no previous study has evaluated their application as a feedstock for fungal bioprocesses.

RESULTS

In this work, we cultured the marine cyanobacterium Synechococcus sp. PCC 7002 in a 3-L externally illuminated bioreactor with working volume of 2 L with a biomass productivity of ~ 0.8 g L-1 day-1. Hydrolysis of the biomass with acids released proteins and hydrolyzed glycogen while hydrolysis of the biomass with base released only proteins but did not hydrolyze glycogen. Among the different acids tested, treatment with HNO3 led to the highest release of proteins and glucose. Cyanobacterial biomass hydrolysate (CBH) prepared in HNO3 was used as a medium to produce cellulase enzyme by the Penicillium funiculosum OAO3 strain while CBH prepared in HCl and treated with charcoal was used as a medium for citric acid by Aspergillus tubingensis. Approximately 50% higher titers of both products were obtained compared to traditional media.

CONCLUSIONS

These results show that the hydrolysate of marine cyanobacteria is an effective source of nutrients/proteins for fungal bioprocesses.

Optimal Laboratory Cultivation Conditions of Limnospira maxima for Large-Scale Production

Cultivating Limnospira maxima, renowned for its abundant proteins and valuable pigments, faces substantial challenges rooted in the limited understanding of its optimal growth parameters, associated high costs, and constraints in the procurement of traditional nitrogen sources, particularly NaNO3. To overcome these challenges, we conducted a comprehensive 4 × 3 factorial design study. Factors considered included white, red, blue, and yellow light spectra, along with nitrogen sources NaNO3 and KNO3, as well as a nitrogen-free control, for large-scale implementation. Optimal growth, measured by Optical Density, occurred with white and yellow light combined with KNO3 as the nitrogen source. These conditions also increased dry weight and Chl-a content. Cultures with nitrogen deprivation exhibited high values for these variables, attributed to carbon accumulation in response to nitrogen scarcity. Phycocyanin, a crucial pigment for nutrition and industry, reached its highest levels in cultures exposed to white light and supplemented with KNO3, with an impressive content of 384.11 g kg-1 of dry weight. These results highlight the efficacy and cost-efficiency of using a combination of white light and KNO3 for large-scale L. maxima cultivation. This strategy offers promising opportunities to address global food security challenges and enhance the production of industrially relevant pigments.

Cellulose Synthase in Atacama Cyanobacteria and Bioethanol Production from Their Exopolysaccharides

Cyanobacteria produce exopolysaccharides (EPSs) as an adaptative mechanism against ultraviolet radiation and desiccation. Cellulose is present in the extracellular polymeric substance in some cyanobacteria genera and it has been proposed as a raw material for biofuel production. The goal of this work was to evaluate the cellulose presence in EPS of Atacama cyanobacteria strains and its use as an alternative and innovative biological source to produce bioethanol. The presence of cellulose was evaluated using techniques of molecular biology, bioinformatics, and electronic microscopy. The conserved motif D,D,D,35QXXRW, characteristic of processive β-glycosyltransferase in all cellulose-producing organisms, was identified in the genome of the LLA-10 strain. This is evidence that cellulose synthase in the LLA-10 strain is a functional enzyme. EPS from Atacama cyanobacteria was hydrolyzed by β-glucosidases (cellobiase and cellulase) and the released glucose was yeast-fermented to ethanol. Ethanol production reached 172.69 ± 0.02 mg ethanol/g EPS after 48 h of incubation. These results are the first step in the evaluation of EPS produced by native cyanobacteria isolated from northern Chile for future biotechnological applications such as the production of bioethanol.

Bioprospecting for industrially relevant exopolysaccharide-producing cyanobacteria under Portuguese simulated climate

Cyanobacterial exopolysaccharides (EPS) are potential candidates for the production of sustainable biopolymers. Although the bioactive and physicochemical properties of cyanobacterial-based EPS are attractive, their commercial exploitation is limited by the high production costs. Bioprospecting and characterizing novel EPS-producing strains for industrially relevant conditions is key to facilitate their implementation in various biotechnological applications and fields. In the present work, we selected twenty-five Portuguese cyanobacterial strains from a diverse taxonomic range (including some genera studied for the first time) to be grown in diel light and temperature, simulating the Portuguese climate conditions, and evaluated their growth performance and proximal composition of macronutrients. Synechocystis and Cyanobium genera, from marine and freshwater origin, were highlighted as fast-growing (0.1-0.2 g L-1 day-1) with distinct biomass composition. Synechocystis sp. LEGE 07367 and Chroococcales cyanobacterium LEGE 19970, showed a production of 0.3 and 0.4 g L-1 of released polysaccharides (RPS). These were found to be glucan-based polymers with high molecular weight and a low number of monosaccharides than usually reported for cyanobacterial EPS. In addition, the absence of known cyanotoxins in these two RPS producers was also confirmed. This work provides the initial steps for the development of cyanobacterial EPS bioprocesses under the Portuguese climate.

Comparative Evaluation of Chlorella vulgaris and Anabaena variabilis for Phycoremediation of Polluted River Water: Spotlighting Heavy Metals Detoxification

This study investigated the phycoremediation abilities of Chlorella vulgaris (microalga) and Anabaena variabilis (cyanobacterium) for the detoxification of polluted river water. Lab-scale phycoremediation experiments were conducted for 20 days at 30 °C using the microalgal and cyanobacterial strains and water samples collected from the Dhaleswari river in Bangladesh. The physicochemical properties such as electrical conductivity (EC), total dissolved solids (TDS), biological oxygen demand (BOD), hardness ions, and heavy metals of the collected water samples indicated that the river water is highly polluted. The results of the phycoremediation experiments demonstrated that both microalgal and cyanobacterial species significantly reduced the pollutant load and heavy metal concentrations of the river water. The pH of the river water was significantly raised from 6.97 to 8.07 and 8.28 by C. vulgaris and A. variabilis, respectively. A. variabilis demonstrated higher efficacy than C. vulgaris in reducing the EC, TDS, and BOD of the polluted river water and was more effective at reducing the pollutant load of SO₄^2- and Zn. In regard to hardness ions and heavy metal detoxification, C. vulgaris performed better at removing Ca²⁺, Mg²⁺, Cr, and Mn. These findings indicate that both microalgae and cyanobacteria have great potential to remove various pollutants, especially heavy metals, from the polluted river water as part of a low-cost, easily controllable, environmentally friendly remediation strategy. Nevertheless, the composition of polluted water should be assessed prior to the designing of microalgae- or cyanobacteria-based remediation technology, since the pollutant removal efficiency is found to be species dependent.

Recent progress in the synthesis of advanced biofuel and bioproducts

Energy is one of the most complex fields of study and an issue that influences nearly every aspect of modern life. Over the past century, combustion of fossil fuels, particularly in the transportation sector, has been the dominant form of energy release. Refining of petroleum and natural gas into liquid transportation fuels is also the centerpiece of the modern chemical industry used to produce materials, solvents, and other consumer goods. In the face of global climate change, the world is searching for alternative, sustainable means of producing energy carriers and chemical building blocks. The use of biofuels in engines predates modern refinery optimization and today represents a small but significant fraction of liquid transportation fuels burnt each year. Similarly, white biotechnology has been used to produce many natural products through fermentation. The evolution of recombinant DNA technology into modern synthetic biology has expanded the scope of biofuels and bioproducts that can be made by biocatalysts. This opinion examines the current trends in this research space, highlighting the substantial growth in computational tools and the growing influence of renewable electricity in the design of metabolic engineering strategies. In short, advanced biofuel and bioproduct synthesis remains a vibrant and critically important field of study whose focus is shifting away from the conversion of lignocellulosic biomass toward a broader consideration of how to reduce carbon dioxide to fuels and chemical products.

Urany-Less Low Voltage Transmission Electron Microscopy: A Powerful Tool for Ultrastructural Studying of Cyanobacterial Cells

Sample preparation protocols for conventional high voltage transmission electron microscopy (TEM) heavily rely on the usage of staining agents containing various heavy metals, most commonly uranyl acetate and lead citrate. However high toxicity, rising legal regulations, and problematic waste disposal of uranyl acetate have increased calls for the reduction or even complete replacement of this staining agent. One of the strategies for uranyless imaging is the employment of low-voltage transmission electron microscopy. To investigate the influence of different imaging and staining strategies on the final image of cyanobacterial cells, samples stained by uranyl acetate with lead citrate, as well as unstained samples, were observed using TEM and accelerating voltages of 200 kV or 25 kV. Moreover, to examine the possibilities of reducing chromatic aberration, which often causes issues when imaging using electrons of lower energies, samples were also imaged using a scanning transmission electron microscopy at 15 kV accelerating voltages. The results of this study demonstrate that low-voltage electron microscopy offers great potential for uranyless electron microscopy.

Increased Biomass and Polyhydroxybutyrate Production by Synechocystis sp. PCC 6803 Overexpressing RuBisCO Genes

The overexpression of the RuBisCO (rbc) gene has recently become an achievable strategy for increasing cyanobacterial biomass and overcoming the biocompound production restriction. We successfully constructed two rbc-overexpressing Synechocystis sp. PCC 6803 strains (OX), including a strain overexpressing a large subunit of RuBisCO (OXrbcL) and another strain overexpressing all large, chaperone, and small subunits of RuBisCO (OXrbcLXS), resulting in higher and faster growth than wild type under sodium bicarbonate supplementation. This increased biomass of OX strains significantly contributed to the higher polyhydroxybutyrate (PHB) production induced by nutrient-deprived conditions, in particular nitrogen (N) and phosphorus (P). As a result of higher PHB contents in OX strains occurring at days 7 and 9 of nutrient deprivation, this enhancement was apparently made possible by cells preferentially maintaining their internal lipids while accumulating less glycogen. The OXrbcLXS strain, with the highest level of PHB at about 39 %w/dry cell weight (DCW) during 7 days of BG11-NP treatment, contained a lower glycogen level (31.9 %w/DCW) than wild type control (40 %w/DCW). In contrast, the wild type control strain exposed to N- and NP-stresses tended to retain lipid levels and store more glycogen than PHB. In this model, we, for the first time, implemented a RuBisCO-overexpressing cyanobacterial factory for overproducing PHB, destined for biofuel and biomaterial biotechnology.

Current Metabolic Engineering Strategies for Photosynthetic Bioproduction in Cyanobacteria

Cyanobacteria are photosynthetic microorganisms capable of using solar energy to convert CO2 and H2O into O2 and energy-rich organic compounds, thus enabling sustainable production of a wide range of bio-products. More and more strains of cyanobacteria are identified that show great promise as cell platforms for the generation of bioproducts. However, strain development is still required to optimize their biosynthesis and increase titers for industrial applications. This review describes the most well-known, newest and most promising strains available to the community and gives an overview of current cyanobacterial biotechnology and the latest innovative strategies used for engineering cyanobacteria. We summarize advanced synthetic biology tools for modulating gene expression and their use in metabolic pathway engineering to increase the production of value-added compounds, such as terpenoids, fatty acids and sugars, to provide a go-to source for scientists starting research in cyanobacterial metabolic engineering.

Developing algae as a sustainable food source

Current agricultural and food production practices are facing extreme stress, posed by climate change and an ever-increasing human population. The pressure to feed nearly 8 billion people while maintaining a minimal impact on the environment has prompted a movement toward new, more sustainable food sources. For thousands of years, both the macro (seaweed and kelp) and micro (unicellular) forms of algae have been cultivated as a food source. Algae have evolved to be highly efficient at resource utilization and have proven to be a viable source of nutritious biomass that could address many of the current food production issues. Particularly for microalgae, studies of their large-scale growth and cultivation come from the biofuel industry; however, this knowledge can be reasonably translated into the production of algae-based food products. The ability of algae to sequester CO₂ lends to its sustainability by helping to reduce the carbon footprint of its production. Additionally, algae can be produced on non-arable land using non-potable water (including brackish or seawater), which allows them to complement rather than compete with traditional agriculture. Algae inherently have the desired qualities of a sustainable food source because they produce highly digestible proteins, lipids, and carbohydrates, and are rich in essential fatty acids, vitamins, and minerals. Although algae have yet to be fully domesticated as food sources, a variety of cultivation and breeding tools exist that can be built upon to allow for the increased productivity and enhanced nutritional and organoleptic qualities that will be required to bring algae to mainstream utilization. Here we will focus on microalgae and cyanobacteria to highlight the current advancements that will expand the variety of algae-based nutritional sources, as well as outline various challenges between current biomass production and large-scale economic algae production for the food market.

Manipulation of topoisomerase expression inhibits cell division but not growth and reveals a distinctive promoter structure in Synechocystis

In cyanobacteria DNA supercoiling varies over the diurnal cycle and is integrated with temporal programs of transcription and replication. We manipulated DNA supercoiling in Synechocystis sp. PCC 6803 by CRISPRi-based knockdown of gyrase subunits and overexpression of topoisomerase I (TopoI). Cell division was blocked but cell growth continued in all strains. The small endogenous plasmids were only transiently relaxed, then became strongly supercoiled in the TopoI overexpression strain. Transcript abundances showed a pronounced 5'/3' gradient along transcription units, incl. the rRNA genes, in the gyrase knockdown strains. These observations are consistent with the basic tenets of the homeostasis and twin-domain models of supercoiling in bacteria. TopoI induction initially led to downregulation of G+C-rich and upregulation of A+T-rich genes. The transcriptional response quickly bifurcated into six groups which overlap with diurnally co-expressed gene groups. Each group shows distinct deviations from a common core promoter structure, where helically phased A-tracts are in phase with the transcription start site. Together, our data show that major co-expression groups (regulons) in Synechocystis all respond differentially to DNA supercoiling, and suggest to re-evaluate the long-standing question of the role of A-tracts in bacterial promoters.

Discovery of novel carbohydrate degrading enzymes from soda lakes through functional metagenomics

Extremophiles provide a one-of-a-kind source of enzymes with properties that allow them to endure the rigorous industrial conversion of lignocellulose biomass into fermentable sugars. However, the fact that most of these organisms fail to grow under typical culture conditions limits the accessibility to these enzymes. In this study, we employed a functional metagenomics approach to identify carbohydrate-degrading enzymes from Ethiopian soda lakes, which are extreme environments harboring a high microbial diversity. Out of 21,000 clones screened for the five carbohydrate hydrolyzing enzymes, 408 clones were found positive. Cellulase and amylase, gave high hit ratio of 1:75 and 1:280, respectively. A total of 378 genes involved in the degradation of complex carbohydrates were identified by combining high-throughput sequencing of 22 selected clones and bioinformatics analysis using a customized workflow. Around 41% of the annotated genes belonged to the Glycoside Hydrolases (GH). Multiple GHs were identified, indicating the potential to discover novel CAZymes useful for the enzymatic degradation of lignocellulose biomass from the Ethiopian soda Lakes. More than 73% of the annotated GH genes were linked to bacterial origins, with Halomonas as the most likely source. Biochemical characterization of the three enzymes from the selected clones (amylase, cellulase, and pectinase) showed that they are active in elevated temperatures, high pH, and high salt concentrations. These properties strongly indicate that the evaluated enzymes have the potential to be used for applications in various industrial processes, particularly in biorefinery for lignocellulose biomass conversion.

Bioremoval of Cylindrospermopsis raciborskii cells and cylindrospermopsin toxin in batch culture by the yeast Aureobasidium pullulans

This study describes the ability of a yeast strain, Aureobasidium pullulans KKUY0701 isolated from eutrophic lake to eliminate Cylindrospermopsis raciborskii and cylindrospermopsin (CYN) toxin. The anti-cyanobacterial activity of this yeast strain was evaluated by growing with living cells and filtrate of C. raciborskii. CYN bioremoval was assayed using living and heat-inactivated yeast cells. Both living cells and filtrate of this yeast strain were able to suppress the growth of C. raciborskii, with total cell death occurring at day 2 and day 3, respectively. Living and inactivated yeast cells, but not yeast filtrate, reduced CYN concentrations released into cyanobacterial cultures, indicating that this toxin might be removed from the culture medium via absorption onto yeast surface rather than enzymatic biodegradation. The adsorption experiments also confirmed the elimination of CYN by living and heat-inactivated yeast. Nevertheless, inactivated yeast exhibited higher capacity (K = 3.3) and intensity (n = 1.4) than living yeast (K = 1.9, n = 1) for CYN adsorption. The study suggests that this yeast strain could be employed for bioremediation of Cylindrospermopsis blooms in freshwaters. Additionally, heat-inactivated yeast biomass could be used in slow sand filters for elimination of CYN in drinking water treatment plants.

Engineered living photosynthetic biocomposites for intensified biological carbon capture

Carbon capture and storage is required to meet Paris Agreement targets. Photosynthesis is nature's carbon capture technology. Drawing inspiration from lichen, we engineered 3D photosynthetic cyanobacterial biocomposites (i.e., lichen mimics) using acrylic latex polymers applied to loofah sponge. Biocomposites had CO₂ uptake rates of 1.57 ± 0.08 g CO₂ g^-1_biomass d^-1. Uptake rates were based on the dry biomass at the start of the trial and incorporate the CO₂ used to grow new biomass as well as that contained in storage compounds such as carbohydrates. These uptake rates represent 14-20-fold improvements over suspension controls, potentially scaling to capture 570 tCO₂ t^-1_biomass yr^-1, with an equivalent land consumption of 5.5-8.17 × 10⁶ ha, delivering annualized CO₂ removal of 8-12 GtCO₂, compared with 0.4-1.2 × 10⁹ ha for forestry-based bioenergy with carbon capture and storage. The biocomposites remained functional for 12 weeks without additional nutrient or water supplementation, whereupon experiments were terminated. Engineered and optimized cyanobacteria biocomposites have potential for sustainable scalable deployment as part of humanity's multifaceted technological stand against climate change, offering enhanced CO₂ removal with low water, nutrient, and land use penalties.

Highly efficient glucose production from raw non-pretreated Chinese medicinal herbal residues via the synergism of cellulase and amylolytic enzymes

Available literature on Chinese medicinal herbal residues (CMHRs) bioconversion highlights pretreatment prior to saccharification with cellulase without considering the presence of starch constituent. Herein, four commonly found CMHRs were tested for starch content, and it was found they all contained starch with content ranging from 4.74% to 16.78%. Hydrolysis of raw CMHRs with combined cellulase and amylolytic enzymes yielded increments of 16.85% to 26.51% in 48-h glucan conversion compared to cellulase alone. Further study showed 48-h glucan conversion of raw CMHRs outperformed that pretreated by water-ethanol successive extraction, ultrasound and acid, but underperformed alkali-pretreated CMHRs. Although increasing 48-h glucan conversion in the range of 7.40% to 24.10% compared to raw CMHRs, alkaline pretreatment demonstrated low glucose recovery and incurred additional cost, making it unfavorable. Saccharification of the four raw CMHRs with combined enzymes seems like a preferred option considering the elimination of high-cost pretreatment step.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

The Potential of Marine Microalgae for the Production of Food, Feed, and Fuel (3F)

Whole-cell microalgae biomass and their specific metabolites are excellent sources of renewable and alternative feedstock for various products. In most cases, the content and quality of whole-cell biomass or specific microalgal metabolites could be produced by both fresh and marine microalgae strains. However, a large water footprint for freshwater microalgae strain is a big concern, especially if the biomass is intended for non-food applications. Therefore, if any marine microalgae could produce biomass of desired quality, it would have a competitive edge over freshwater microalgae. Apart from biofuels, recently, microalgal biomass has gained considerable attention as food ingredients for both humans and animals and feedstock for different bulk chemicals. In this regard, several technologies are being developed to utilize marine microalgae in the production of food, feed, and biofuels. Nevertheless, the production of suitable and cheap biomass feedstock using marine microalgae has faced several challenges associated with cultivation and downstream processing. This review will explore the potential pathways, associated challenges, and future directions of developing marine microalgae biomass-based food, feed, and fuels (3F).

Screening the Survival of Cyanobacteria Under Perchlorate Stress. Potential Implications for Mars In Situ Resource Utilization

Cyanobacteria are good candidates for various martian applications as a potential source of food, fertilizer, oxygen, and biofuels. However, the increased levels of highly toxic perchlorates may be a significant obstacle to their growth on Mars. Therefore, in the present study, 17 cyanobacteria strains that belong to Chroococcales, Chroococcidiopsidales, Nostocales, Oscillatoriales, Pleurocapsales, and Synechococcales were exposed to 0.25-1.0% magnesium perchlorate concentrations (1.5-6.0 mM ClO₄^- ions) for 14 days. The exposure to perchlorate induced at least partial inhibition of growth in all tested strains, although five of them were able to grow at the highest perchlorate concentration: Chroococcidiopsis thermalis, Leptolyngbya foveolarum, Arthronema africanum, Geitlerinema cf. acuminatum, and Cephalothrix komarekiana. Chroococcidiopsis sp. Chroococcidiopsis cubana demonstrated growth up to 0.5%. Strains that maintained growth displayed significantly increased malondialdehyde content, indicating perchlorate-induced oxidative stress, whereas the chlorophyll a/carotenoids ratio tended to be decreased. The results show that selected cyanobacteria from different orders can tolerate perchlorate concentrations typical for the martian regolith, indicating that they may be useful in Mars exploration. Further studies are required to elucidate the biochemical and molecular basis for the perchlorate tolerance in selected cyanobacteria.

Enzymatic pretreatment of algal biomass has different optimal conditions for biogas and bioethanol routes

Enzymatic pretreatment is emerging as an efficient tool for the extraction of biofuel precursors from algal biomass. However, yardsticks for end-use directed selection of optimal pretreatment conditions are not yet identified. The present study, for the first time, reveals different optimal conditions for algal biomass solubilization and sugar release. Algal biomass pretreatment optimization was carried out using the Taguchi method. Crude enzyme from Aspergillus fischeri was found effective for pretreatment of Chlorella pyrenoidosa. Maximum sugar yield (190 mg g^-1 biomass) from algal biomass was observed at a substrate concentration of 4 g L^-1, with a 5% enzyme load at temperature 60°C, pH 5.5, and shaking speed of 80 rpm. In contrast, maximum sCOD (1350 mg g^-1 biomass) was obtained at 2 g L^-1 substrate concentration with enzyme load of 20% v/v, at 60°C, pH 4, and shaking speed of 100 rpm. Hence, the first set of conditions would be more beneficial for bioethanol production. Whereas another set of conditions would improve the biofuel production that requires maximum solubilization of algal biomass, such as fermentative methane production. Overall, the present observations established that process conditions required for enzymatic pretreatment of algal biomass should be selected according to the desired biofuel type.

A review on cyanobacteria cultivation for carbohydrate-based biofuels: Cultivation aspects, polysaccharides accumulation strategies, and biofuels production scenarios

Cyanobacterial biomass has constituted a crucial third and fourth-generation biofuel material, with great potential to synthesize a wide range of metabolites, mainly carbohydrates. Lately, carbohydrate-based biofuels from cyanobacteria, such as bioethanol, biohydrogen, and biobutanol, have attracted attention as a sustainable alternative to petroleum-based products. Cyanobacteria can perform a simple process of saccharification, and extracted carbohydrates can be converted into biofuels with two alternatives; the first one consists of a fermentative process based on bacteria or yeasts, while the second alternative consists of an internal metabolic process of their own in intracellular carbohydrate content, either by the natural or genetic engineered process. This study reviewed carbohydrate-enriched cyanobacterial biomass as feedstock for biofuels. Detailed insights on technical strategies and limitations of cultivation, polysaccharide accumulation strategies for further fermentation process were provided. Advances and challenges in bioethanol, biohydrogen, and biobutanol production by cyanobacteria synthesis and an independent fermentative process are presented. Critical outlook on life-cycle assessment and techno-economical aspects for large-scale application of these technologies were discussed.

Biomass pre-treatments of the N2-fixing cyanobacterium Tolypothrix for co-production of methane

Tolypothrix, a self-flocculating, fast growing, CO₂ and nitrogen-fixing cyanobacterium, can be cultivated in nutrient-poor ash dam waters of coal-fired power stations, converting CO₂ emissions into organic biomass. Therefore, the biomass of Tolypothrix sp. is a promising source for bio-fertiliser production, providing micro- and macronutrients. Energy requirements for production could potentially be offset via anaerobic digestion (AD) of the produced biomass, which may further improve the efficiency of the resulting biofertilizer. The aim of this study was to evaluate the effectiveness of pre-treatment conditions and subsequent methane (CH₄) production of Tolypothrix under out-door cultivation conditions. Pre-treatments on biogas and methane production for Tolypothrix sp. biomass investigated were: (1) thermal at 95 °C for 10 h, (2) hydrothermal by autoclave at 121 °C at 1013.25 hPa for 20 min, using a standard moisture-heat procedure, (3) microwave at an output power of 900 W and an exposure time of 3 min, (4) sonication at an output power of 10 W for 3.5 h at 10 min intervals with 20 s breaks and (5) freeze-thaw cycles at -80 °C for 24 h followed by thawing at room temperature. Thermal, hydrothermal and sonication pre-treatments supported high solubilization of organic compounds up to 24.40 g L^-1. However, higher specific CH₄ production of 0.012 and 0.01 L CH₄ g^-1 volatile solids_added. was achieved for thermal and sonic pre-treatments, respectively. High N- and low C-content of the Tolypothrix biomass affected CH₄ recovery, while pre-treatment accelerated production of volatile acids (15.90 g L^-1) and ammonia-N-accumulation (1.41 g L^-1), leading to poor CH₄ yields. Calculated theoretical CH₄ yields based on the elemental composition of the biomass were ~55% higher than actual yields. This highlights the complexity of interactions during AD which are not adequately represented by elemental composition.

Designing the bioproduction of Martian rocket propellant via a biotechnology-enabled in situ resource utilization strategy

Mars colonization demands technological advances to enable the return of humans to Earth. Shipping the propellant and oxygen for a return journey is not viable. Considering the gravitational and atmospheric differences between Mars and Earth, we propose bioproduction of a Mars-specific rocket propellant, 2,3-butanediol (2,3-BDO), from CO₂, sunlight and water on Mars via a biotechnology-enabled in situ resource utilization (bio-ISRU) strategy. Photosynthetic cyanobacteria convert Martian CO₂ into sugars that are upgraded by engineered Escherichia coli into 2,3-BDO. A state-of-the-art bio-ISRU for 2,3-BDO production uses 32% less power and requires a 2.8-fold higher payload mass than proposed chemical ISRU strategies, and generates 44 tons of excess oxygen to support colonization. Attainable, model-guided biological and materials optimizations result in an optimized bio-ISRU that uses 59% less power and has a 13% lower payload mass, while still generating 20 tons excess oxygen. Addressing the identified challenges will advance prospects for interplanetary space travel.

Returning from Mars to Earth requires propellant. The authors propose a biotechnology-enabled in situ resource utilization (bioISRU) process to produce a Mars specific rocket propellant, 2,3-butanediol, using cyanobacteria and engineered E. coli, with lower payload mass and energy usage compared to chemical ISRU strategies.

Nitrogen and 17β-Estradiol level regulate Thermosynechococcus sp. CL-1 carbon dioxide fixation, monosaccharide production, and estrogen degradation

Thermosynechococcus sp. CL-1 (TCL-1), a thermophilic cyanobacterium from a hot spring in Taiwan, has been known of its efficiency in CO₂ fixation, byproducts production (pigments, macromolecules). This study observed the performance of TCL-1 in CO₂ fixation, estrogen degradation, and monosaccharide production under various levels of Dissolved Inorganic Nitrogen (DIN) and 17β-estradiol (E2) as nitrogen supply and estrogen addition. Under nitrogen starvation, TCL-1 performed similar results on CO₂ fixation rate and biomass production but enhanced the monosaccharide production compared to the cases of high nitrogen supply. The highest CO₂ fixation rate and glucose productivity reached to 151.8 ± 6.6 and 38.1 ± 0.9 mg/L/h, under DIN level of 0.58 mM and 0.5 mg/L E2. Adding E2 in the system did not inhibit the performance of TCL-1. During the cultivation, TCL-1 converted E2 into E1 and the biodegradation was the main path for estrogen degradation. Total E2 degradation reached to 69.4 ± 2.0%.

The Effect of Promoter and RBS Combination on the Growth and Glycogen Productivity of Sodium-Dependent Bicarbonate Transporter (SbtA) Overexpressing Synechococcus sp. PCC 7002 Cells

Sodium dependent bicarbonate transporter, SbtA is a high-affinity, inducible bicarbonate transporter in cyanobacterial cells. Our previous work has shown that overexpression of this transporter can significantly increase growth and glycogen accumulation in Synechococcus sp. PCC 7002 cells. In this work, we have tested the effect of two different RBS sequences (RBS1: GGAGGA and RBS2: AGGAGA) and three different promoters (P_cpcB, P_cpcB560, and P_rbcL2) on the growth and glycogen production in SbtA-overexpressing Synechococcus sp. PCC 7002 cells. Our results show that P_cpcB or P_cpcB560 were more effective than P_rbcL2 in increasing the growth and glycogen content. The choice of RBS sequence had relatively minor effect, though RBS2 was more effective than RBS1. The transformant E, with P_cpcB560 and RBS2, showed the highest growth. The biomass after 5 days of growth on air or 1% CO₂ was increased by about 90% in the strain E compared to PCC 7002 cells. All transformants overexpressing SbtA had higher glycogen content. However, growing the cells with bubbling of 1% CO₂ did not increase cellular glycogen content any further. The strain E had about 80% higher glycogen content compared to WT PCC 7002 cells. Therefore, the glycogen productivity of the strain E grown with air-bubbling was about 2.5-fold that of the WT PCC 7002 cells grown similarly. Additionally, some of the transformants had higher chlorophyll content while all the transformants had higher carotenoid content compared to the PCC 7002 cells, suggesting interaction between carbon transport and pigment levels. Thus, this work shows that the choice of photosynthetic promoters and RBSs sequences can impact growth and glycogen accumulation in SbtA-overexpressing cells.

Single-cell yolk-shell nanoencapsulation for long-term viability with size-dependent permeability and molecular recognition

Like nanomaterials, bacteria have been unknowingly used for centuries. They hold significant economic potential for fuel and medicinal compound production. Their full exploitation, however, is impeded by low biological activity and stability in industrial reactors. Though cellular encapsulation addresses these limitations, cell survival is usually compromised due to shell-to-cell contacts and low permeability. Here, we report ordered packing of silica nanocolloids with organized, uniform and tunable nanoporosities for single cyanobacterium nanoencapsulation using protamine as an electrostatic template. A space between the capsule shell and the cell is created by controlled internalization of protamine, resulting in a highly ordered porous shell-void-cell structure formation. These unique yolk-shell nanostructures provide long-term cell viability with superior photosynthetic activities and resistance in harsh environments. In addition, engineering the colloidal packing allows tunable shell-pore diameter for size-dependent permeability and introduction of new functionalities for specific molecular recognition. Our strategy could significantly enhance the activity and stability of cyanobacteria for various nanobiotechnological applications.

Utilization of Biomass Derived from Cyanobacteria-Based Agro-Industrial Wastewater Treatment and Raisin Residue Extract for Bioethanol Production

Biofuels produced from photosynthetic microorganisms such as microalgae and cyanobacteria could potentially replace fossil fuels as they offer several advantages over fuels produced from lignocellulosic biomass. In this study, energy production potential in the form of bioethanol was examined using different biomasses derived from the growth of a cyanobacteria-based microbial consortium on a chemical medium and on agro-industrial wastewaters (i.e., dairy wastewater, winery wastewater and mixed winery–raisin effluent) supplemented with a raisin residue extract. The possibility of recovering fermentable sugars from a microbial biomass dominated by the filamentous cyanobacterium Leptolynbgya sp. was demonstrated. Of the different acid hydrolysis conditions tested, the best results were obtained with sulfuric acid 2.5 N for 120 min using dried biomass from dairy wastewater and mixed winery–raisin wastewaters. After optimizing sugar release from the microbial biomass by applying acid hydrolysis, alcoholic fermentation was performed using the yeast Saccharomyces cerevisiae. Raisin residue extract was added to the treated biomass broth in all experiments to enhance ethanol production. Results showed that up to 85.9% of the theoretical ethanol yield was achieved, indicating the potential use of cyanobacteria-based biomass in combination with a raisin residue extract as feedstock for bioethanol production.

A Cyanobacteria-Based Biofilm System for Advanced Brewery Wastewater Treatment

Algal/cyanobacterial biofilm photobioreactors provide an alternative technology to conventional photosynthetic systems for wastewater treatment based on high biomass production and easy biomass harvesting at low cost. This study introduces a novel cyanobacteria-based biofilm photobioreactor and assesses its performance in post-treatment of brewery wastewater and biomass production. Two different supporting materials (glass/polyurethane) were tested to investigate the effect of surface hydrophobicity on biomass attachment and overall reactor performance. The reactor exhibited high removal efficiency (over 65%) of the wastewater’s pollutants (chemical oxygen demand, nitrate, nitrite, ammonium, orthophosphate, and total Kjeldahl nitrogen), while biomass per reactor surface reached 13.1 and 12.8 g·m−2 corresponding to 406 and 392 mg·L−1 for glass and polyurethane, respectively, after 15 days of cultivation. The hydrophilic glass surface favored initial biomass adhesion, although eventually both materials yielded complete biomass attachment, highlighting that cell-to-cell interactions are the dominant adhesion mechanism in mature biofilms. It was also found that the biofilm accumulated up to 61% of its dry weight in carbohydrates at the end of cultivation, thus making the produced biomass a suitable feedstock for bioethanol production.

CfrA, a Novel Carbon Flow Regulator, Adapts Carbon Metabolism to Nitrogen Deficiency in Cyanobacteria

Cyanobacteria unable to fix atmospheric nitrogen have evolved sophisticated adaptations to survive to long periods of nitrogen starvation. These genetic programs are still largely unknown-as evidenced by the many proteins whose expression is regulated in response to nitrogen availability, but which belong to unknown or hypothetical categories. In Synechocystis sp. PCC 6803, the global nitrogen regulator NtcA activates the expression of the sll0944 gene upon nitrogen deprivation. This gene encodes a protein that is highly conserved in cyanobacteria, but of unknown function. Based on the results described herein, we named the product of sll0944 carbon flow regulator A (CfrA). We analyzed the phenotypes of strains containing different levels of CfrA, including a knock-out strain (ΔcfrA), and two strains overexpressing CfrA from either the constitutive P _trc promoter (Ptrc-cfrA) or the arsenite-inducible promoter P _arsB (Pars-cfrA). Our results show that the amount of CfrA determines the accumulation of glycogen, and affects the synthesis of protein and photosynthetic pigments as well as amino acid pools. Strains with high levels of CfrA present high levels of glycogen and a decrease in photosynthetic pigments and protein content when nitrogen is available. Possible interactions between CfrA and the pyruvate dehydrogenase complex or PII protein have been revealed. The phenotype associated with CfrA overexpression is also observed in PII-deficient strains; however, it is lethal in this genetic background. Taken together, our results indicate a role for CfrA in the adaptation of carbon flux during acclimation to nitrogen deficiency.

Microalgae starch: A promising raw material for the bioethanol production

Ethanol is currently the most successful biofuel and can be produced from microalgal biomass (third-generation). Ethanol from microalgal biomass has advantages because it does not use arable land and reduces environmental impacts through the sequestration of CO₂ from the atmosphere. In this way, micro and macroalgal starch, which is structurally similar to that from higher plants can be considered a promise raw material for the production of bioethanol. Thus, strategies can be used to intensify the carbohydrate concentration in the microalgal biomass enabling the production of third-generation bioethanol. The microalgae biomass can be destined to biorefineries so that the residual biomass generated from the extraction processes is used for the production of high value-added products. Therefore, the process will have an impact on reducing the production costs and the generation of waste. In this context, this review aims to bring concepts and perspectives on the production of third-generation bioethanol, demonstrating the microalgal biomass potential as a carbon source to produce bioethanol and supply part of the world energy demand. The main factors that influence the microalgal cultivation and fermentation process, as well as the processes of transformation of biomass into the easily fermentable substrate are also discussed.

Bacterial cellulase from the intestinal tract of the sugarcane borer

Cellulolytic enzymes have wide use in several industrial segments (e.g. biofuels, pulp and paper, food, and cosmetics). However, one of the challenges is their large-scale production with high specific activity to eliminate the dependence of the purchase of enzymatic cocktails produced by commercial parties. The aims of this study were (1) isolation, selection, and partial characterization of bacterial cellulases present in the intestinal tract of the sugarcane borer and (2) to identify cellulase-producing bacteria by analyzing the 16S rDNA gene. Cellulase production and purification assays resulted in similar electrophoretic profiles between four bacterial strains. These strains were identified as Klebsiella pneumoniae, Klebsiella sp., and Bacillus sp. K. pneumoniae was the main cellulase-producing microorganism. Our results show the possibility of finding cellulolytic microorganisms that inhabit the gut of herbivorous animals, especially those that are predators of important crops of economic value. Furthermore, K. pneumoniae cellulase is of medical importance. In hospitals, health professionals, hospital technicians, patients and visitors wear clothes containing cellulose. Thus, K. pneumoniae within hospitals can contaminate these clothes and be spread to the environment. In that case, it would be important for the hospital's chemical sterilization products to have at least one cellulase inhibitor.

Growth inhibition of Microcystis aeruginosa and adsorption of microcystin toxin by the yeast Aureobasidium pullulans, with no effect on microalgae

This study evaluates the inhibitory effect of a yeast strain, Aureobasidium pullulans KKUY0701, isolated from decayed cyanobacterial bloom against harmful cyanobacterium Microcystis aeruginosa and determines the ability of this strain to remove microcystin (MC) toxin from the water. The antialgal activity of this yeast strain was assayed by co-cultivation with M. aeruginosa, diatom, and green algal species. The MC adsorption experiment was conducted in the presence of living and heat-inactivated yeast cells. Both yeast cells and filtrates caused a rapid reduction in the growth of M. aeruginosa, with complete death and cell lysis occurring after 3 days. The yeast strain did not exhibit any inhibitory effect on either green algae or diatoms. Both living and heat-inactivated yeast cells were capable of adsorption of MC on their surfaces. Inactivated yeast exhibited higher adsorption capacity and lower intensity than living yeast for the adsorption of MC toxin. The results of this study suggest that this yeast strain could be employed to selectively reduce cyanobacterial blooms in freshwaters. Moreover, the application of heat-inactivated yeast's biomass for toxin adsorption gives new possibilities in drinking water treatment plants.

Efficient removal of U(VI) from aqueous solutions using the magnetic biochar derived from the biomass of a bloom-forming cyanobacterium (Microcystis aeruginosa)

The utilization of Microcystis biomass is an urgent issue in the mitigation of cyanobacterial bloom. In this study, Microcystis-derived biochar (MB) and Fe₃O₄-modified biochar (Fe₃O₄/MB) were fabricated for the U(VI) elimination. The results showed that U(VI) sorption process by either MB or Fe₃O₄/MB was pH-dependent and ionic strength-independent. The maximum sorption capacity of MB was higher than that of Fe₃O₄/MB. According to the analysis of X-ray photoelectron spectroscopy, U(VI) sorption on both MB and Fe₃O₄/MB was mainly ascribed to the surface complexation between U(VI) and oxygen-containing functional groups on the surface of MB. Fe₃O₄ particles on the surface of MB didn't provide extra active sites for the sorption of U(VI), but it enabled the adsorbent to be magnetically separated. Five consecutive sorption/desorption cycles verified the good reusability of Fe₃O₄/MB in this study. Therefore, the investigation is not only meaningful for the utilization of nuisance biomass from cyanobacterial blooms, but also provides novel adsorbents for the U(VI) removal from aqueous solutions.

Newly discovered Synechococcus sp. PCC 11901 is a robust cyanobacterial strain for high biomass production

Cyanobacteria, which use solar energy to convert carbon dioxide into biomass, are potential solar biorefineries for the sustainable production of chemicals and biofuels. However, yields obtained with current strains are still uncompetitive compared to existing heterotrophic production systems. Here we report the discovery and characterization of a new cyanobacterial strain, Synechococcus sp. PCC 11901, with promising features for green biotechnology. It is naturally transformable, has a short doubling time of ≈2 hours, grows at high light intensities and in a wide range of salinities and accumulates up to ≈33 g dry cell weight per litre when cultured in a shake-flask system using a modified growth medium − 1.7 to 3 times more than other strains tested under similar conditions. As a proof of principle, PCC 11901 engineered to produce free fatty acids yielded over 6 mM (1.5 g L⁻¹), an amount comparable to that achieved by similarly engineered heterotrophic organisms.

Włodarczyk et al. discover that cyanobacterium Synechococcus sp. PCC 11901 accumulates three times more biomass than other cyanobacterial strains in the same conditions. An engineered version of this strain also produces as much free fatty acid as other commonly used heterotrophic microorganisms, suggesting its utility for the sustainable production of carbon-based molecules.

Enhancing photosynthetic production of glycogen-rich biomass for use as a fermentation feedstock

Current sources of fermentation feedstocks, i.e. corn, sugar cane, or plant biomass, fall short of demand for liquid transportation fuels and commodity chemicals in the United States. Aquatic phototrophs including cyanobacteria have the potential to supplement the supply of current fermentable feedstocks. In this strategy, cells are engineered to accumulate storage molecules including glycogen, cellulose, and/or lipid oils that can be extracted from harvested biomass and fed to heterotrophic organisms engineered to produce desired chemical products. In this manuscript, we examine the production of glycogen in the model cyanobacteria, Synechococcus sp. strain PCC 7002, and subsequent conversion of cyanobacterial biomass by an engineered Escherichia coli to octanoic acid as a model product. In effort to maximize glycogen production, we explored the deletion of catabolic enzymes and overexpression of GlgC, an enzyme that catalyzes the first committed step towards glycogen synthesis. We found that deletion of glgP increased final glycogen titers when cells were grown in diurnal light. Overexpression of GlgC led to a temporal increase in glycogen content but not in an overall increase in final titer or content. The best strains were grown, harvested, and used to formulate media for growth of E. coli. The cyanobacterial media was able to support the growth of an engineered E. coli and produce octanoic acid at the same titer as common laboratory media.

Biochemical Characteristics and a Genome-Scale Metabolic Model of an Indian Euryhaline Cyanobacterium with High Polyglucan Content

Marine cyanobacteria are promising microbes to capture and convert atmospheric CO₂ and light into biomass and valuable industrial bio-products. Yet, reports on metabolic characteristics of non-model cyanobacteria are scarce. In this report, we show that an Indian euryhaline Synechococcus sp. BDU 130192 has biomass accumulation comparable to a model marine cyanobacterium and contains approximately double the amount of total carbohydrates, but significantly lower protein levels compared to Synechococcus sp. PCC 7002 cells. Based on its annotated chromosomal genome sequence, we present a genome scale metabolic model (GSMM) of this cyanobacterium, which we have named as iSyn706. The model includes 706 genes, 908 reactions, and 900 metabolites. The difference in the flux balance analysis (FBA) predicted flux distributions between Synechococcus sp. PCC 7002 and Synechococcus sp. BDU130192 strains mimicked the differences in their biomass compositions. Model-predicted oxygen evolution rate for Synechococcus sp. BDU130192 was found to be close to the experimentally-measured value. The model was analyzed to determine the potential of the strain for the production of various industrially-useful products without affecting growth significantly. This model will be helpful to researchers interested in understanding the metabolism as well as to design metabolic engineering strategies for the production of industrially-relevant compounds.

Overexpression of bicarbonate transporters in the marine cyanobacterium Synechococcus sp. PCC 7002 increases growth rate and glycogen accumulation

BACKGROUND

Synechococcus sp. PCC 7002 is an attractive organism as a feedstock and for photoautotrophic production of biofuels and biochemicals due to its fast growth and ability to grow in marine/brackish medium. Previous studies suggest that the growth of this organism is limited by the HCO₃ ^- transport across the cytoplasmic membrane. Tools for genetic engineering are well established for this cyanobacterium, which makes it possible to overexpress genes of interest.

RESULTS

In this work, we overexpressed two different native Na⁺-dependent carbon transporters viz., SbtA and BicA in Synechococcus sp. PCC 7002 cells under the influence of a strong light-inducible promoter and a strong RBS sequence. The overexpression of these transporters enhanced biomass by about 50%, increased intracellular glycogen about 50%, and increased extracellular carbohydrate up to threefold. Importantly, the biomass and glycogen productivity of the transformants with air bubbling was even higher than that of WT cells with 1% CO₂ bubbling. The overexpression of these transporters was associated with an increased carotenoid content without altering the chl a content.

CONCLUSIONS

Our work shows the utility of increased carbon transport in improving the growth as well as product formation in a marine cyanobacterium and will serve to increase the utility of this organism as a potential cell factory.

The Suitability of Orthogonal Hosts to Study Plant Cell Wall Biosynthesis

Plant cells are surrounded by an extracellular matrix that consists mainly of polysaccharides. Many molecular components involved in plant cell wall polymer synthesis have been identified, but it remains largely unknown how these molecular players function together to define the length and decoration pattern of a polysaccharide. Synthetic biology can be applied to answer questions beyond individual glycosyltransferases by reconstructing entire biosynthetic machineries required to produce a complete wall polysaccharide. Recently, this approach was successful in establishing the production of heteromannan from several plant species in an orthogonal host-a yeast-illuminating the role of an auxiliary protein in the biosynthetic process. In this review we evaluate to what extent a selection of organisms from three kingdoms of life (Bacteria, Fungi and Animalia) might be suitable for the synthesis of plant cell wall polysaccharides. By identifying their key attributes for glycoengineering as well as analyzing the glycosidic linkages of their native polymers, we present a valuable comparison of their key advantages and limitations for the production of different classes of plant polysaccharides.