A Tn5051-like mer-containing transposon identified in a heavy metal tolerant strain Achromobacter sp. AO22

Abundant diversity of accessory genetic elements and associated antimicrobial resistance genes in pseudomonas aeruginosa isolates from a single Chinese hospital

OBJECTIVES

Pseudomonas aeruginosa has intrinsic antibiotic resistance and the strong ability to acquire additional resistance genes. However, a limited number of investigations provide detailed modular structure dissection and evolutionary analysis of accessory genetic elements (AGEs) and associated resistance genes (ARGs) in P. aeruginosa isolates. The objective of this study is to reveal the prevalence and transmission characteristics of ARGs by epidemiological investigation and bioinformatics analysis of AGEs of P. aeruginosa isolates taken from a Chinese hospital.

METHODS

Draft-genome sequencing was conducted for P. aeruginosa clinical isolates (n = 48) collected from a single Chinese hospital between 2019 and 2021. The clones of P. aeruginosa isolates, type 3 secretion system (T3SS)-related virulotypes, and the resistance spectrum were identified using multilocus sequence typing (MLST), polymerase chain reaction (PCR), and antimicrobial susceptibility tests. In addition, 17 of the 48 isolates were fully sequenced. An extensive modular structure dissection and genetic comparison was applied to AGEs of the 17 sequenced P. aeruginosa isolates.

RESULTS

From the draft-genome sequencing, 13 STs were identified, showing high genetic diversity. BLAST search and PCR detection of T3SS genes (exoT, exoY, exoS, and exoU) revealed that the exoS+/exoU- virulotype dominated. At least 69 kinds of acquired ARGs, involved in resistance to 10 different categories of antimicrobials, were identified in the 48 P. aeruginosa isolates. Detailed genetic dissection and sequence comparisons were applied to 25 AGEs from the 17 isolates, together with five additional prototype AGEs from GenBank. These 30 AGEs were classified into five groups -- integrative and conjugative elements (ICEs), unit transposons, Inc_pPBL16 plasmids, Inc_p60512-IMP plasmids, and Inc_pPA7790 plasmids.

CONCLUSION

This study provides a broad-scale and deeper genomics understanding of P. aeruginosa isolates taken from a single Chinese hospital. The isolates collected are characterized by high genetic diversity, high virulence, and multiple drug resistance. The AGEs in P. aeruginosa chromosomes and plasmids, as important genetic platforms for the spread of ARGs, contribute to enhancing the adaptability of P. aeruginosa in hospital settings.

Characterization of a Carbapenem-Resistant BKC-1-Producing Clinical Isolate Belonging to the Pseudomonas putida Group from Brazil

Since its first report, the class A Brazilian Klebsiella carbapenemase (BKC) has been detected only among Enterobacterales isolates from Brazilian hospitals. In this study, we characterized a multidrug-resistant Pseudomonas juntendi clinical isolate and identified a 43.3-kb plasmid carrying bla_BKC-1 and a class 1 integron (In1996) containing the arr-2, qnrVC1, dfrA21, and aac(6')-Ib' gene cassettes. Our results confirm the ability of Pseudomonas putida group isolates to acquire antimicrobial resistance determinants and further act as resistance reservoirs.

A Plasmid Carrying blaIMP-56 in Pseudomonas aeruginosa Belonging to a Novel Resistance Plasmid Family

bla_IMP and bla_VIM are the most detected plasmid-encoded carbapenemase genes in Pseudomonas aeruginosa. Previous studies have reported plasmid sequences carrying bla_IMP variants, except bla_IMP-56. In this study, we aimed to characterize a plasmid carrying bla_IMP-56 in a P. aeruginosa strain isolated from a Mexican hospital. The whole genome of P. aeruginosa strain PE52 was sequenced using Illumina Miseq 2 × 150 bp, with 5 million paired-end reads. We characterized a 27 kb plasmid (pPE52IMP) that carried bla_IMP-56. The phylogenetic analysis of RepA in pPE52IMP and 33 P. aeruginosa plasmids carrying resistance genes reported in the GenBank revealed that pPE52IMP and four plasmids (pMATVIM-7, unnamed (FDAARGOS_570), pD5170990, and pMRVIM0713) were in the same clade. These closely related plasmids belonged to the MOB_P11 subfamily and had similar backbones. Another plasmid (p4130-KPC) had a similar backbone to pPE52IMP; however, its RepA was truncated. In these plasmids, the resistance genes bla_KPC-2, bla_VIM variants, aac(6′)-Ib4, bla_OXA variants, and bla_IMP-56 were inserted between phd and resolvase genes. This study describes a new family of plasmids carrying resistance genes, with a similar backbone, the same RepA, and belonging to the MOB_P11 subfamily in P. aeruginosa. In addition, our characterized plasmid harboring bla_IMP-56 (pPE52IMP) belongs to this family.

Novel strategies and advancement in reducing heavy metals from the contaminated environment

The most contemporary ecological issues are the dumping of unprocessed factories' effluent. As a result, there is an increasing demand for creative, practical, environmentally acceptable, and inexpensive methodologies to remediate inorganic metals (Hg, Cr, Pb, and Cd) liquidated into the atmosphere, protecting ecosystems. Latest innovations in biological metals have driven natural treatment as a viable substitute for traditional approaches in this area. To eliminate pesticide remains from soil/water sites, technologies such as oxidation, burning, adsorption, and microbial degradation have been established. Bioremediation is a more cost-effective and ecologically responsible means of removing heavy metals than conventional alternatives. As a result, microorganisms have emerged as a necessary component of methyl breakdown and detoxification via metabolic reactions and hereditary characteristics. The utmost operative variant for confiscating substantial metals commencing contaminated soil was A. niger, which had a maximum bioaccumulation efficiency of 98% (Cd) and 43% (Cr). Biosensor bacteria are both environmentally sustainable and cost-effective. As a result, microbes have a range of metal absorption processes that allow them to have higher metal biosorption capabilities. Additionally, the biosorption potential of bacterium, fungus, biofilm, and algae, inherently handled microorganisms that immobilized microbial cells for the elimination of heavy metals, was reviewed in this study. Furthermore, we discuss some of the challenges and opportunities associated with producing effective heavy metal removal techniques, such as those that employ different types of nanoparticles.

VIM-encoding IncpSTY plasmids and chromosome-borne integrative and mobilizable elements (IMEs) and integrative and conjugative elements (ICEs) in Pseudomonas

BACKGROUND

The carbapenem-resistance genes bla_VIM are widely disseminated in Pseudomonas, and frequently harbored within class 1 integrons that reside within various mobile genetic elements (MGEs). However, there are few reports on detailed genetic dissection of bla_VIM-carrying MGEs in Pseudomonas.

METHODS

This study presented the complete sequences of five bla_VIM-2/-4-carrying MGEs, including two plasmids, two chromosomal integrative and mobilizable elements (IMEs), and one chromosomal integrative and conjugative element (ICE) from five different Pseudomonas isolates.

RESULTS

The two plasmids were assigned to a novel incompatibility (Inc) group Inc_pSTY, which included only seven available plasmids with determined complete sequences and could be further divided into three subgroups Inc_pSTY-1/2/3. A detailed sequence comparison was then applied to a collection of 15 MGEs belonging to four different groups: three representative Inc_pSTY plasmids, two Tn6916-related IMEs, two Tn6918-related IMEs, and eight Tn6417-related ICEs and ten of these 15 MGEs were first time identified. At least 22 genes involving resistance to seven different categories of antibiotics and heavy metals were identified within these 15 MGEs, and most of these resistance genes were located within the accessory modules integrated as exogenous DNA regions into these MGEs. Especially, eleven of these 15 MGEs carried the bla_VIM genes, which were located within 11 different concise class 1 integrons.

CONCLUSION

These bla_VIM-carrying integrons were further integrated into the above plasmids, IMEs/ICEs with intercellular mobility. These MGEs could transfer between Pseudomonas isolates, which resulted in the accumulation and spread of bla_VIM among Pseudomonas and thus was helpful for the bacteria to survival from the stress of antibiotics. Data presented here provided a deeper insight into the genetic diversification and evolution of VIM-encoding MGEs in Pseudomonas.

Novel Chromosome-Borne Accessory Genetic Elements Carrying Multiple Antibiotic Resistance Genes in Pseudomonas aeruginosa

Pseudomonas aeruginosa is noted for its intrinsic antibiotic resistance and capacity of acquiring additional resistance genes. In this study, the genomes of nine clinical P. aeruginosa isolates were fully sequenced. An extensive genetic comparison was applied to 18 P. aeruginosa accessory genetic elements (AGEs; 13 of them were sequenced in this study and located within P. aeruginosa chromosomes) that were divided into four groups: five related integrative and conjugative elements (ICEs), four related integrative and mobilizable elements (IMEs), five related unit transposons, and two related IMEs and their two derivatives. At least 45 resistance genes, involved in resistance to 10 different categories of antibiotics and heavy metals, were identified from these 18 AGEs. A total of 10 β-lactamase genes were identified from 10 AGEs sequenced herein, and nine of them were captured within class 1 integrons, which were further integrated into ICEs and IMEs with intercellular mobility, and also unit transposons with intracellular mobility. Through this study, we identified for the first time 20 novel MGEs, including four ICEs Tn6584, Tn6585, Tn6586, and Tn6587; three IMEs Tn6853, Tn6854, and Tn6878; five unit transposons Tn6846, Tn6847, Tn6848, Tn6849, and Tn6883; and eight integrons In1795, In1778, In1820, In1784, In1775, In1774, In1789, and In1799. This was also the first report of two resistance gene variants bla_CARB-53 and catB3s, and a novel ST3405 isolate of P. aeruginosa. The data presented here denoted that complex transposition and homologous recombination promoted the assembly and integration of AGEs with mosaic structures into P. aeruginosa chromosomes.

Characterization of the plasmid of incompatibility groups IncFIIpKF727591 and IncpKPHS1 from Enterobacteriaceae species

Background

Multiple incompatibility (Inc) groups of plasmids have been identified in Enterobacteriaceae species, but there are still quite a few sequenced plasmids that could not be assigned to any known Inc groups.

Methods

One IncFII_pKF727591β plasmid p205880-qnrS and two Inc_pKPHS1 plasmids p11219-CTXM and p205880-NR1 were fully sequenced in this work. Detailed genomic comparison was applied to all available sequenced plasmids of IncFII_pKF727591 or Inc_pKPHS1 group.

Results

p205880-qnrS carried a novel transposon Tn6396, which was an ISKpn19-compsite transposon and represented a prototype transposable element carrying a minimum core qnrS1 module. p11219-CTXM harbored a novel transposon Tn6559, which was generated from integration of a truncated IS903D–bla_CTX-M-14–ISEcp1 unit into the Tn3-family cryptic unit transposon Tn1722. Two Inc groups, IncFII_pKF727591 and Inc_pKPHS1, of plasmids from Enterobacteriaceae species were proposed, and IncFII_pKF727591 was further grouped into two subgroups IncFII_pKF727591α and IncFII_pKF727591β. Each of the 11 IncFII_pKF727591 plasmids carried multiple accessory modules including at least one resistance module, and the relatively small IncFII_pKF727591 backbones could acquire a wealth of foreign genetic contents. The modular structures of plasmid backbones were conserved within each of IncFII_pKF727591α and IncFII_pKF727591β subgroups but dramatically different, although with similar gene organizations, between these two subgroups. The Inc_pKPHS1 backbones were conserved with respect to modular structures, and only four of the 14 Inc_pKPHS1 plasmids carried accessory modules, two of which contained resistance genes.

Conclusion

A genomic comparison of sequenced Inc_pKPHS1 or IncFII_pKF727591 plasmids provides insights into modular differences and genetic diversification of these plasmids, some of which carries antimicrobial resistance genes.

Characterization of a NDM-1- Encoding Plasmid pHFK418-NDM From a Clinical Proteus mirabilis Isolate Harboring Two Novel Transposons, Tn6624 and Tn6625

Acquisition of the bla_NDM–1 gene by Proteus mirabilis is a concern because it already has intrinsic resistance to polymyxin E and tigecycline antibiotics. Here, we describe a P. mirabilis isolate that carries a pPrY2001-like plasmid (pHFK418-NDM) containing a bla_NDM–1 gene. The pPrY2001-like plasmid, pHFK418-NDM, was first reported in China. The pHFK418-NDM plasmid was sequenced using a hybrid approach based on Illumina and MinION platforms. The sequence of pHFK418-NDM was compared with those of the six other pPrY2001-like plasmids deposited in GenBank. We found that the multidrug-resistance encoding region of pHFK418-NDM contains ΔTn10 and a novel transposon Tn6625. Tn6625 consists of ΔTn1696, Tn6260, In251, ΔTn125 (carrying bla_NDM–1), ΔTn2670, and a novel mph(E)-harboring transposon Tn6624. In251 was first identified in a clinical isolate, suggesting that it has been transferred efficiently from environmental organisms to clinical isolates. Genomic comparisons of all these pPrY2001-like plasmids showed that their relatively conserved backbones could integrate the numerous and various accessory modules carrying multifarious antibiotic resistance genes. Our results provide a greater depth of insight into the horizontal transfer of resistance genes and add interpretive value to the genomic diversity and evolution of pPrY2001-like plasmids.

Genetic Characterization of a bla VIM-24-Carrying IncP-7β Plasmid p1160-VIM and a bla VIM-4-Harboring Integrative and Conjugative Element Tn6413 From Clinical Pseudomonas aeruginosa

This study presents three novel integrons In1394, In1395, and In1443, three novel unit transposons Tn6392, Tn6393, and Tn6403, one novel conjugative element (ICE) Tn6413, and the first sequenced IncP-7 resistance plasmid p1160-VIM from clinical Pseudomonas aeruginosa. Detailed sequence comparison of p1160-VIM (carrying Tn6392 and Tn6393) and Tn6413 (carrying Tn6403) with related elements were performed. Tn6392, Tn6393, and Tn6403 were generated from integration of In1394 (carrying bla _VIM-24), In1395 and In1443 (carrying bla _VIM-4) into prototype Tn3-family unit transposons Tn5563, Tn1403, and Tn6346, respectively. To the best of our knowledge, this is the first report of a bla _VIM-24-carrying P. aeruginosa isolate.

Comparative genomics analysis of pTEM-2262, an MDR plasmid from Citrobacter freundii, harboring two unclassified replicons

AIM

To genetically characterize the multidrug-resistance (MDR) plasmid pTEM-2262 that could not be classified into any known incompatibility group from the clinical Citrobacter freundii isolate 2262.

MATERIALS & METHODS

The repA or repB deletion mutants of pTEM-2262 were constructed using the scarless Cas9-assisted recombineering system. Comparative genomic analysis of pTEM-2262 and the other four previously sequenced plasmids belonging to the same incompatibility group were performed.

RESULTS

pTEM-2262, a conjugative plasmid, harbored two unclassified replicons, repA and repB, while repB was not essential for pTEM-2262 replication. In five analyzed plasmids, their conserved backbones primarily integrated massive accessory modules at two 'hotspots' that were located between orf597 and orf504, and between orf393 and orf405. All the antibiotic resistance genes of pTEM-2262 were clustered in the MDR region with a complex mosaic structure.

CONCLUSION

This study thoroughly investigates the detailed structure and genomic comparison of this unknown incompatibility group for the first time.

Comparative analysis of bla KPC-2- and rmtB-carrying IncFII-family pKPC-LK30/pHN7A8 hybrid plasmids from Klebsiella pneumoniae CG258 strains disseminated among multiple Chinese hospitals

Background

We recently reported the complete sequence of a blaKPC-2- and rmtB-carrying IncFII-family plasmid p675920-1 with the pKPC-LK30/pHN7A8 hybrid structure. Comparative genomics of additional sequenced plasmids with similar hybrid structures and their prevalence in bla_KPC-carrying Klebsiella pneumoniae strains from China were investigated in this follow-up study.

Methods

A total of 51 bla_KPC-carrying K. pneumoniae strains were isolated from 2012 to 2016 from five Chinese hospitals and genotyped by multilocus sequence typing. The bla_KPC-carrying plasmids from four representative strains were sequenced and compared with p675920-1 and pCT-KPC. Plasmid transfer, carbapenemase activity determination, and bacterial antimicrobial susceptibility test were performed to characterize resistance phenotypes mediated by these plasmids. The prevalence of pCT-KPC-like plasmids in these bla_KPC-carrying K. pneumoniae strains was screened by PCR.

Result

The six KPC-encoding plasmids p1068-KPC, p20049-KPC, p12139-KPC and p64917-KPC (sequenced in this study) and p675920-1 and pCT-KPC slightly differed from one another due to deletion and acquisition of various backbone and accessory regions. Two major accessory resistance regions, which included the blaKPC-2 region harboring blaKPC-2 (carbapenem resistance) and blaSHV-12 (β-lactam resistance), and the MDR region carrying rmtB (aminoglycoside resistance), fosA3 (fosfomycin resistance), bla_TEM-1B (β-lactam resistance) and bla_CTX-M-65 (β-lactam resistance), were found in each of these six plasmids and exhibited several parallel evolution routes. The pCT-KPC-like plasmids were present in all the 51 K. pneumoniae isolates, all of which belonged to CG258.

Conclusion

There was clonal dissemination of K. pneumoniae CG258 strains, harboring bla_KPC-2- and rmtB-carrying IncFII-family pKPC-LK30/pHN7A8 hybrid plasmids, among multiple Chinese hospitals.

Spread of Carbapenem Resistance by Transposition and Conjugation Among Pseudomonas aeruginosa

The emergence of carbapenem-resistant Pseudomonas aeruginosa represents a worldwide problem. To understand the carbapenem-resistance mechanisms and their spreading among P. aeruginosa strains, whole genome sequences were determined of two extensively drug-resistant strains that are endemic in Dutch hospitals. Strain Carb01 63 is of O-antigen serotype O12 and of sequence type ST111, whilst S04 90 is a serotype O11 strain of ST446. Both strains carry a gene for metallo-β-lactamase VIM-2 flanked by two aacA29 genes encoding aminoglycoside acetyltransferases on a class 1 integron. The integron is located on the chromosome in strain Carb01 63 and on a plasmid in strain S04 90. The backbone of the 159-kb plasmid, designated pS04 90, is similar to a previously described plasmid, pND6-2, from Pseudomonas putida. Analysis of the context of the integron showed that it is present in both strains on a ∼30-kb mosaic DNA segment composed of four different transposons that can presumably act together as a novel, active, composite transposon. Apart from the presence of a 1237-bp insertion sequence element in the composite transposon on pS04 90, these transposons show > 99% sequence identity indicating that transposition between plasmid and chromosome could have occurred only very recently. The pS04 90 plasmid could be transferred by conjugation to a susceptible P. aeruginosa strain. A second class 1 integron containing a gene for a CARB-2 β-lactamase flanked by an aacA4′-8 and an aadA2 gene, encoding an aminoglycoside acetyltransferase and adenylyltransferase, respectively, was present only in strain Carb01 63. This integron is located also on a composite transposon that is inserted in an integrative and conjugative element on the chromosome. Additionally, this strain contains a frameshift mutation in the oprD gene encoding a porin involved in the transport of carbapenems across the outer membrane. Together, the results demonstrate that integron-encoded carbapenem and carbapenicillin resistance can easily be disseminated by transposition and conjugation among Pseudomonas aeruginosa strains.

Structural genomics of pNDM-BTR harboring In191 and Tn6360, and other bla NDM-carrying IncN1 plasmids

Aim: To characterize a conjugative bla NDM-1-carrying plasmid pNDM-BTR from a clinical Escherichia coli isolate. Materials & methods: The complete nucleotide sequence of pNDM-BTR was determined using next-generation sequencing technology. Comparative genomic analysis of bla NDM-carrying IncN1 plasmids, including pNDM-BTR, was performed, and the antimicrobial resistance phenotypes were determined. Results: pNDM-BTR contained three accessory modules, namely IS26, a novel Tn3-family transposon Tn6360 and the dfrA14 region composed of In191, ecoRII–ecoRIImet and ΔIS1X2. The relatively small IncN1 backbones could integrate massive accessory modules, most of which were integrated at two ‘hotspots’. These IncN1 plasmids contained distinct profiles of accessory modules, which included those carrying various resistance genes. Conclusion: This study provides a deeper insight into horizontal transfer of resistance genes among IncN1 plasmids.

Evolution in situ of ARI-A in pB2-1, a type 1 IncC plasmid recovered from Klebsiella pneumoniae, and stability of Tn4352B

The IncC plasmid pB2-1, from a Klebsiella pneumoniae isolate recovered in Brisbane prior to 1995, belongs to a subtype of type 1 IncC plasmids, here designated type 1a, that includes those carrying carbapenem resistance genes such as bla_NDM and bla_KPC. pB2-1 carries a 2358bp deletion in the rhs1 gene found in four other type 1a IncC plasmids. pB2-1 confers resistance to ampicillin, gentamicin, kanamycin, neomycin, tobramycin, sulfamethoxazole, tetracycline and trimethoprim. It transferred at a frequency of 4.7×10^-3 transconjugants per donor, similar to that of another type 1a plasmid pDGO100 but ten-fold lower than for its closest relative pRMH760. This difference may be due to a single amino acid substitution in TraL. pB2-1 has an ISEc52 insertion in the dsbC gene, demonstrating that dsbC is not essential for transfer. pB2-1 lacks the ARI-B insertion and hence the sul2 gene. The resistance genes sul1, dfrA10, aphA1a, bla_TEM, aadB, and tetA(B) are all in the ARI-A island, in a configuration that has evolved from ARI-A of pRMH760 in two steps. A 10.3kb segment extending from the catA1 gene to the end of pDUmer module was lost via homologous recombination between two copies of IS4321. In addition, a 5.3kb segment extending from IS1326 to the left end of Tn4352B was replaced with an 18.7kb tet(B)-containing segment bounded on one end by IS1 and on the other by IS26. The IS26-bounded transposon Tn4352B was shown to be stable in K. pneumoniae in contrast to the high instability observed in E. coli.

Biosorption characteristic of Alcaligenes sp. BAPb.1 for removal of lead(II) from aqueous solution

In this study, strain BAPb.1 was isolated from lead mining area and used as an adsorbent to remove lead(II) ions from aqueous solution. The physicochemical characteristics, heavy metal resistance and antibiotic sensitivity of strain BAPb.1 were investigated. Biosorption capacity was evaluated by batch biosorption experiments, and isothermal characteristics were discussed. Atomic force microscopy (AFM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectrometry (FTIR) were conducted to explore the mechanism for lead(II) adsorption. Based on morphological and physiological characteristics as well as the phylogenetic analysis of 16S rDNA sequences, strain BAPb.1 was identified as a member of the genus Alcaligenes. It exhibited high resistances to multiple heavy metals such as lead(II), copper(II), zinc(II), nickel(II) and chromium(VI), and to antibiotics such as kanamycin, ampicillin, streptomycin, chloramphenicol, and tetracycline. The optimum conditions for maximum biosorption rate of 85.2% and maximum capacity of 56.8 mg g^-1 were found at pH of 5, adsorbent dosage of 1.5 g L^-1 (dry weight), initial lead(II) concentration of 100 mg L^-1, and contact time of 30 min at 30 °C. Biosorption isotherms were well fitted with Langmuir isotherm model. Mechanism analysis reveals that the lead(II) ions may exchange with sodium and potassium ions, and the hydroxyl, carbonyl and phosphate groups on the cell surface can chelate the lead(II) ions, therefore, surface adsorption play significant role in the biosorption process.

The impact of chemical pollution on the resilience of soils under multiple stresses: A conceptual framework for future research

Soils are faced with man-made chemical stress factors, such as the input of organic or metal-containing pesticides, in combination with non-chemical stressors like soil compaction and natural disturbance like drought. Although multiple stress factors are typically co-occurring in soil ecosystems, research in soil sciences on this aspect is limited and focuses mostly on single structural or functional endpoints. A mechanistic understanding of the reaction of soils to multiple stressors is currently lacking. Based on a review of resilience theory, we introduce a new concept for research on the ability of polluted soil (xenobiotics or other chemical pollutants as one stressor) to resist further natural or anthropogenic stress and to retain its functions and structure. There is strong indication that pollution as a primary stressor will change the system reaction of soil, i.e., its resilience, stability and resistance. It can be expected that pollution affects the physiological adaption of organisms and the functional redundancy of the soil to further stress. We hypothesize that the recovery of organisms and chemical-physical properties after impact of a follow-up stressor is faster in polluted soil than in non-polluted soil, i.e., polluted soil has a higher dynamical stability (dynamical stability=1/recovery time), whereas resilience of the contaminated soil is lower compared to that of not or less contaminated soil. Thus, a polluted soil might be more prone to change into another system regime after occurrence of further stress. We highlight this issue by compiling the literature exemplarily for the effects of Cu contamination and compaction on soil functions and structure. We propose to intensify research on effects of combined stresses involving a multidisciplinary team of experts and provide suggestions for corresponding experiments. Our concept offers thus a framework for system level analysis of soils paving the way to enhance ecological theory.

Diversity and role of plasmids in adaptation of bacteria inhabiting the Lubin copper mine in Poland, an environment rich in heavy metals

The Lubin underground mine, is one of three mining divisions in the Lubin-Glogow Copper District in Lower Silesia province (Poland). It is the source of polymetallic ore that is rich in copper, silver and several heavy metals. Black shale is also significantly enriched in fossil organic matter in the form of long-chain hydrocarbons, polycyclic aromatic hydrocarbons, organic acids, esters, thiophenes and metalloporphyrins. Biological analyses have revealed that this environment is inhabited by extremophilic bacteria and fungi. Kupfershiefer black shale and samples of water, bottom and mineral sediments from the underground (below 600 m) Lubin mine were taken and 20 bacterial strains were isolated and characterized. All exhibited multi-resistant and hypertolerant phenotypes to heavy metals. We analyzed the plasmidome of these strains in order to evaluate the diversity and role of mobile DNA in adaptation to the harsh conditions of the mine environment. Experimental and bioinformatic analyses of 11 extrachromosomal replicons were performed. Three plasmids, including a broad-host-range replicon containing a Tn3 family transposon, carried genes conferring resistance to arsenic, cadmium, cobalt, mercury and zinc. Functional analysis revealed that the resistance modules exhibit host specificity, i.e., they may increase or decrease tolerance to toxic ions depending on the host strain. The other identified replicons showed diverse features. Among them we identified a catabolic plasmid encoding enzymes involved in the utilization of histidine and vanillate, a putative plasmid-like prophage carrying genes responsible for NAD biosynthesis, and two repABC-type plasmids containing virulence-associated genes. These findings provide an unique molecular insight into the pool of extrachromosomal replicons and highlight their role in the biology and adaptation of extremophilic bacteria inhabiting terrestrial deep subsurface.

Concomitant antibiotic and mercury resistance among gastrointestinal microflora of feral brook trout, Salvelinus fontinalis

Twenty-nine bacterial isolates representing eight genera from the gastrointestinal tracts of feral brook trout Salvelinus fontinalis (Mitchell) demonstrated multiple maximal antibiotic resistances and concomitant broad-spectrum mercury (Hg) resistance. Equivalent viable plate counts on tryptic soy agar supplemented with either 0 or 25 μM HgCl(2) verified the ubiquity of mercury resistance in this microbial environment. Mercury levels in lake water samples measured 1.5 ng L(-1); mercury concentrations in fish filets ranged from 81.8 to 1,080 ng g(-1) and correlated with fish length. The presence of similar antibiotic and Hg resistance patterns in multiple genera of gastrointestinal microflora supports a growing body of research that multiple selective genes can be transferred horizontally in the presence of an unrelated individual selective pressure. We present data that bioaccumulation of non-point source Hg pollution could be a selective pressure to accumulate both antibiotic and Hg resistant bacteria.

Embedded elements in the IncPβ plasmids R772 and R906 can be mobilized and can serve as a source of diverse and novel elements

IncP plasmids are important contributors to bacterial adaptation. Their phenotypic diversity is due largely to accessory regions located in one or two specific parts of the plasmid. The accessory regions are themselves diverse, as judged from sequenced plasmids mostly isolated from non-clinical sources. To further understand the diversity, evolutionary history and functional attributes of the accessory regions, we compared R906 and R772, focusing on the oriV–trfA accessory region. These IncPβ plasmids were from porcine and clinical sources, respectively. We found that the accessory regions formed potentially mobile elements, Tn510 (from R906) and Tn511 (from R772), that differed internally but had identical borders. Both elements appeared to have evolved from a TnAO22-like mer transposon that had inserted into an ancestral IncPβ plasmid and then accrued additional transposable elements and genes from various proteobacteria. Structural comparisons suggested that Tn510 (and a descendent in pB10), Tn511 and the mer element in pJP4 represent three lineages that evolved from the same widely dispersed IncPβ carrier. Functional studies on Tn511 revealed that its mer module is inactive due to a merT mutation, and that its aphAI region is prone to deletion. More significantly, we showed that by providing a suitable transposase gene in trans, the defective Tn510 and Tn511 could transpose intact or in part, and could also generate new elements (stable cointegrates and novel transposons). The ingredients for assisted transposition events similar to those observed here occur in natural microcosms, providing non-self-mobile elements with avenues for dispersal to new replicons and for structural diversification. This work provides an experimental demonstration of how the complex embedded elements uncovered in IncP plasmids and in other plasmid families may have been generated.

Analysis of pSC138, the multidrug resistance plasmid of Salmonella enterica serotype Choleraesuis SC-B67

Salmonella enterica serotype Choleraesuis (S. Choleraesuis) usually causes systemic infections in man and needs antimicrobial treatment. Multidrug resistance (MDR) in S. Choleraesuis is thus a great concern in the treatment of systemic non-typhoid salmonellosis. A large plasmid, pSC138, was identified in 2002 from a S. Choleraesuis strain SC-B67 that was resistant to all antimicrobial agents commonly used to treat salmonellosis, including ciprofloxacin and ceftriaxone. Complete DNA sequence of the plasmid had been determined previously (Chiu et al., 2005). In the present study, the sequence of pSC138 was reannotated in detail and compared with several newly sequenced plasmids. Some transposable elements and drug resistance genes were further delineated. Plasmid pSC138 was 138,742 bp in length and consisted of 177 open reading frames (ORFs). While 134 of the ORFs displayed significant identity levels to other plasmid and prokaryotic sequences, the remaining 43 ORFs have not been previously reported. Mobile elements, including two integrons, seven insertion sequences and eight transposons, and a truncated prophage together encompass at least 66,781 bp (48.1%) of the plasmid genome. The sequence of pSC138 consists of three major regions: a large composite transposable region Tn6088 with a Tn21-like backbone inserted by a variety of integrons or transposable elements; a transfer/maintenance region that contains a conserved ISEcp1-mediated transposon-like element Tn6092, carrying an AmpC gene, bla(CMY-2), that confers the ceftriaxone resistance; and a Rep_3 type of replication region. Another seven bacteremic strains of S. Choleraesuis that expressed the same MDR phenotype were identified during 2003-2008. The same Rep_3 type replicase and the bla(CMY-2)-containing, ISEcp1-mediated transposon-like element were found in the MDR isolates, suggesting a successful preservation and dissemination of the MDR plasmid. Comparison of pSC138 with other recently published plasmids revealed a high identity level between partial sequences of pSC138 and plasmids of the same or different incompatibility groups. The large MDR region found in pSC138 may provide a niche for the future evolution of the plasmid by acquisition of relevant resistance genes through the panoply of mobile elements and illegitimate recombination events.