Cross-linked enzyme aggregates (CLEAs) of selected lipases: a procedure for the proper calculation of their recovered activity

Evaluating Sustainable Development Pathways for Protein- and Peptide-Based Bioadsorbents for Phosphorus Recovery from Wastewater

Recovering phosphate (P) from point sources such as wastewater effluent is a priority in order to alleviate the impacts of eutrophication and implement a circular economy for an increasingly limited resource. Bioadsorbents featuring P-binding proteins and peptides offer exquisite P specificity and sensitivity for achieving ultralow P concentrations, i.e., <100 μg P L-1, a discharge limit that has been implemented in at least one treatment facility in nine U.S. states. To prioritize research objectives for P recovery in wastewater treatment, we compared the financial and environmental sustainability of protein/peptide bioadsorbents to those of LayneRT anion exchange resin. The baseline scenario (reflecting lab-demonstrated performance at a full-scale implementation) had costs that were 3 orders of magnitude higher than those for typical wastewater treatment. However, scenarios exploring bioadsorbent improvements, including increasing the P-binding capacity per unit volume by using smaller P-selective peptides and nanoparticle base materials and implementing reuse, dramatically decreased median impacts to $1.06 m-3 and 0.001 kg CO2 equiv m-3; these values are in line with current wastewater treatment impacts and lower than the median LayneRT impacts of $4.04 m-3 and 0.19 kg CO2 equiv m-3. While the financial viability of capturing low P concentrations is a challenge, incorporating the externalities of environmental impacts may provide a feasible path forward to motivate ultralow P capture.

Bio-imprinted magnetic cross-linked polyphenol oxidase aggregates for enhanced synthesis of L-dopa, a neurodegenerative therapeutic drug

Bio-imprinted magnetic cross-linked enzyme aggregates (i-m-CLEAs) of polyphenol oxidase (PPO) obtained from potato peels were prepared using amino-functionalized magnetic nanoparticles. Bio-imprinting is being used to improve the catalytic efficiency and conformational stability of enzymes. For bio-imprinting, PPO was incubated with different imprint/template molecules (catechol, 4-methyl catechol and l-3,4-dihydroxy phenylalanine) before cross-linking with glutaraldehyde. CLEAs imprinted with 4-methyl catechol showed maximum activity as compared with non-bio-imprinted magnetic CLEAs (m-CLEAs). They were further characterized by scanning electron microscopy and confocal microscopy. In bio-imprinted m-CLEAs, half-life (t_1/2) of PPO significantly improved (364.74 min) as compared to free PPO (43.58 min) and non-bio-imprinted m-CLEAs (266.54 min). Bio-imprinted m-CLEAs showed excellent thermal and storage stability as well as reusability. The CLEAs preparation were used for the synthesis of l-3,4-dihydroxyphenylalanine (L-dopa, a therapeutic drug to treat neurodegenerative disorder) and a remarkable increase in L-dopa yield (23.5-fold) was obtained as compared to free enzyme. A cost effective and reusable method has been described for the production of L-dopa.

Optimized Conditions for Preparing a Heterogeneous Biocatalyst via Cross-Linked Enzyme Aggregates (CLEAs) of β-Glucosidase from Aspergillus niger

This study mainly aims to find the optimal conditions for immobilizing a non-commercial β-glucosidase from Aspergillus niger via cross-linked enzyme aggregates (CLEAs) by investigating the effect of cross-linking agent (glutaraldehyde) concentration and soy protein isolate/enzyme ratio (or spacer/enzyme ratio) on the catalytic performance of β-glucosidase through the central composite rotatable design (CCRD). The influence of certain parameters such as pH and temperature on the hydrolytic activity of the resulting heterogeneous biocatalyst was assessed and compared with those of a soluble enzyme. The catalytic performance of both the soluble and immobilized enzyme was assessed by hydrolyzing ρ-nitrophenyl-β-D-glucopyranoside (ρ-NPG) at pH 4.5 and 50 °C. It was found that there was a maximum recovered activity of around 33% (corresponding to hydrolytic activity of 0.48 U/mL) in a spacer/enzyme ratio of 4.69 (mg/mg) using 25.5 mM glutaraldehyde. The optimal temperature and pH conditions for the soluble enzyme were 60 °C and 4.5, respectively, while those for CLEAs of β-glucosidase were between 50 and 65 °C and pH 3.5 and 4.0. These results reveal that the immobilized enzyme is more stable in a wider pH and temperature range than its soluble form. Furthermore, an improvement was observed in thermal stability after immobilization. After 150 days at 4 °C, the heterogeneous biocatalyst retained 80% of its original activity, while the soluble enzyme retained only 10%. The heterogeneous biocatalyst preparation was also characterized by TG/DTG and FT-IR analyses that confirmed the introduction of carbon chains via cross-linking. Therefore, the immobilized biocatalyst prepared in this study has improved enzyme stabilization, and it is an interesting approach to preparing heterogeneous biocatalysts for industrial applications.

Strategies for the Immobilization of Eversa® Transform 2.0 Lipase and Application for Phospholipid Synthesis

Eversa® Transform 2.0 lipase (ET2) is a recent lipase formulation derived from the Thermomyces lanuginosus lipase cultivated on Aspergillus oryzae and specially designed for biodiesel production. Since it has not been available for a long time, research on the efficiency of this enzyme in other applications remains unexplored. Moreover, even though it has been launched as a free enzyme, its immobilization may extend the scope of ET2 applications. This work explored ET2 immobilization on octadecyl methacrylate beads (IB-ADS-3) and proved the efficiency of the derivatives for esterification of glycerophosphocholine (GPC) with oleic acid in anhydrous systems. ET2 immobilized via interfacial activation on commercial hydrophobic support Immobead IB-ADS-3 showed maximum enzyme loading of 160 mg/g (enzyme/support) and great stability for GPC esterification under 30% butanone and solvent-free systems. For reusability, yields above 63% were achieved after six reaction cycles for GPC esterification. Considering the very high enzyme loading and the number of reuses achieved, these results suggest a potential application of this immobilized biocatalyst for esterification reactions in anhydrous media. This study is expected to encourage the exploration of other approaches for this enzyme, thereby opening up several new possibilities.

Microbial lipases and their industrial applications: a comprehensive review

Lipases are very versatile enzymes, and produced the attention of the several industrial processes. Lipase can be achieved from several sources, animal, vegetable, and microbiological. The uses of microbial lipase market is estimated to be USD 425.0 Million in 2018 and it is projected to reach USD 590.2 Million by 2023, growing at a CAGR of 6.8% from 2018. Microbial lipases (EC 3.1.1.3) catalyze the hydrolysis of long chain triglycerides. The microbial origins of lipase enzymes are logically dynamic and proficient also have an extensive range of industrial uses with the manufacturing of altered molecules. The unique lipase (triacylglycerol acyl hydrolase) enzymes catalyzed the hydrolysis, esterification and alcoholysis reactions. Immobilization has made the use of microbial lipases accomplish its best performance and hence suitable for several reactions and need to enhance aroma to the immobilization processes. Immobilized enzymes depend on the immobilization technique and the carrier type. The choice of the carrier concerns usually the biocompatibility, chemical and thermal stability, and insolubility under reaction conditions, capability of easy rejuvenation and reusability, as well as cost proficiency. Bacillus spp., Achromobacter spp., Alcaligenes spp., Arthrobacter spp., Pseudomonos spp., of bacteria and Penicillium spp., Fusarium spp., Aspergillus spp., of fungi are screened large scale for lipase production. Lipases as multipurpose biological catalyst has given a favorable vision in meeting the needs for several industries such as biodiesel, foods and drinks, leather, textile, detergents, pharmaceuticals and medicals. This review represents a discussion on microbial sources of lipases, immobilization methods increased productivity at market profitability and reduce logistical liability on the environment and user.

Synthesis of Ibuprofen Monoglyceride in Solventless Medium with Novozym®435: Kinetic Analysis

This study investigates the enzymatic esterification of glycerol and ibuprofen in a solventless medium catalyzed by immobilized lipase B from Candida antarctica (Novozym®435). Fixing the concentration of this enzymatic solid preparation at 30 g·L−1, and operating at a constant stirring speed of 720 rpm, the temperature was changed between 50 and 80 °C, while the initial concentration of ibuprofen was studied from 20 to 100 g·L−1. Under these conditions, the resistance of external mass transport can be neglected, as confirmed by the Mears criterion (Me < 0.15). However, the mass transfer limitation inside the pores of the support has been evidenced. The values of the effectiveness factor (η) vary between 0.08 and 0.16 for the particle size range considered according to the Weisz–Prater criteria. Preliminary runs permit us to conclude that the enzyme was deactivated at medium to high temperatures and initial concentration values of ibuprofen. Several phenomenological kinetic models were proposed and fitted to all data available, using physical and statistical criteria to select the most adequate model. The best kinetic model was a reversible sigmoidal model with pseudo-first order with respect to dissolved ibuprofen and order 2 with respect to monoester ibuprofen, assuming the total first-order one-step deactivation of the enzyme, with partial first order for ibuprofen and enzyme activity.

Immobilization of Enzymes as Cross-Linked Enzyme Aggregates: General Strategy to Obtain Robust Biocatalysts

Among carrier-free immobilization techniques, cross-linked enzyme aggregates (CLEA) have been extensively described for a great number of diverse enzymes. During the last two decades, numerous efforts have been devoted to identify and understand the main variables involved in CLEA's preparation process leading to robust immobilized biocatalysts. Since every enzyme immobilized as CLEA requires specific conditions and protocols, herein we provide a general preparation strategy where main parameters are highlighted and correlated with a possible desired improved enzyme feature.

CLEAs, Combi-CLEAs and ‘Smart’ Magnetic CLEAs: Biocatalysis in a Bio-Based Economy

Biocatalysis has emerged in the last decade as a pre-eminent technology for enabling the envisaged transition to a more sustainable bio-based economy. For industrial viability it is essential that enzymes can be readily recovered and recycled by immobilization as solid, recyclable catalysts. One method to achieve this is via carrier-free immobilization as cross-linked enzyme aggregates (CLEAs). This methodology proved to be very effective with a broad selection of enzymes, in particular carbohydrate-converting enzymes. Methods for optimizing CLEA preparations by, for example, adding proteic feeders to promote cross-linking, and strategies for making the pores accessible for macromolecular substrates are critically reviewed and compared. Co-immobilization of two or more enzymes in combi-CLEAs enables the cost-effective use of multiple enzymes in biocatalytic cascade processes and the use of “smart” magnetic CLEAs to separate the immobilized enzyme from other solids has raised the CLEA technology to a new level of industrial and environmental relevance. Magnetic-CLEAs of polysaccharide-converting enzymes, for example, are eminently suitable for use in the conversion of first and second generation biomass.

Novozym 435: the “perfect” lipase immobilized biocatalyst?

Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes with its advantages and drawbacks.

Developing Antibacterial Nanocrystalline Cellulose Using Natural Antibacterial Agents

We used hairy nanocrystalline cellulose functionalized with aldehyde groups, otherwise known as sterically stabilized nanocrystalline cellulose (SNCC), to facilitate the attachment of the antibacterial agents lysozyme and nisin. Immobilization was achieved using a simple, green process that does not require any linker or activator. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses showed successful attachment of both nisin and lysozyme onto the SNCC. The efficacy of the conjugated nanocellulose against the model bacteria Bacillus subtilis and Staphylococcus aureus was tested in terms of bacterial growth, cell viability, and biofilm formation/removal. The results show that the minimum inhibitory concentration of the conjugated nanocellulose is higher than that of lysozyme and nisin in free form, which was expected given that immobilization reduces the possible spatial orientations of these proteins. We observed that free nisin is not active against S. aureus after 24 h of exposure due to either deactivation of free nisin or development of resistance in S. aureus against free nisin. Interestingly, we did not observe this phenomenon when the bacteria were exposed to antibacterials immobilized on nanocellulose, suggesting that immobilization of antibacterial agents onto SNCC effectively retains their activity over long time periods. We suggest that antibacterial SNCC is a promising candidate for the development of antibacterial wound dressings.

A Synthetic Reaction Cascade Implemented by Colocalization of Two Proteins within Catalytically Active Inclusion Bodies

In nature, enzymatic reaction cascades, i.e., realized in metabolic networks, operate with unprecedented efficacy, with the reactions often being spatially and temporally orchestrated. The principle of "learning from nature" has in recent years inspired the setup of synthetic reaction cascades combining biocatalytic reaction steps to artificial cascades. Hereby, the spatial organization of multiple enzymes, e.g., by coimmobilization, remains a challenging task, as currently no generic principles are available that work for every enzyme. We here present a tunable, genetically programmed coimmobilization strategy that relies on the fusion of a coiled-coil domain as aggregation inducing-tag, resulting in the formation of catalytically active inclusion body coimmobilizates (Co-CatIBs). Coexpression and coimmobilization was proven using two fluorescent proteins, and the strategy was subsequently extended to two enzymes, which enabled the realization of an integrated enzymatic two-step cascade for the production of (1 R,2 R)-1-phenylpropane-1,2-diol (PPD), a precursor of the calicum channel blocker diltiazem. In particular, the easy production and preparation of Co-CatIBs, readily yielding a biologically produced enzyme immobilizate renders the here presented strategy an interesting alternative to existing cascade immobilization techniques.

Influence of the nature of the support on the catalytic performance of CALB: experimental and theoretical evidence

CALB immobilized on hydrophobic supports exhibits higher conversion of ibuprofen and enantiomeric excess towards the S-enantiomer.

Enzymatic synthesis of 1,3-dihydroxyphenylacetoyl-sn-glycerol: Optimization by response surface methodology and evaluation of its antioxidant and antibacterial activities

In this study, the enzymatic synthesis of phenylacetoyl glycerol ester was carried out as a response to the increasing consumer demand for natural compounds. 1,3-dihydroxyphenylacetoyl-sn-Glycerol (1,3-di-HPA-Gly), labeled as "natural" compound with interesting biological properties, has been successfully synthesized for the first time in good yield by a direct esterification of glycerol (Gly) with p-hydroxyphenylacetic acid (p-HPA) using immobilized Candida antarctica lipase as a biocatalyst. Spectroscopic analyses of purified esters showed that the glycerol was mono- or di-esterified on the primary hydroxyl group. These compounds were evaluated for their antioxidant activity using two different tests. The glycerol di-esters (1,3-di-HPA-Gly) showed a higher antiradical capacity than that of the butyl hydroxytoluene. Furthermore, compared to the p-HPA, synthesized ester (1,3-di-HPA-Gly) exhibited the most antibacterial effect mainly against Gram + bacteria. Among synthesized esters the 1,3-di-HPA-Gly was most effective as antioxidant and antibacterial compound. These findings could be the basis for a further exploitation of the new compound, 1,3-di-HPA-Gly, as antioxidant and antibacterial active ingredient in the cosmetic and pharmaceutical fields.

Screening of Lipases with Unusual High Activity in the sn-2 Esterification of 1,3-Dicaprin under Mild Operating Conditions

In this work, the synthesis of acylglycerides with high nutritional value was carried out by enzymatic esterification at sn-2 position of 1,3-dicaprin with palmitic acid. A comparative study of the performance of several biocatalysts according to the obtained products was carried out. The results obtained with several of the biocatalysts evaluated are very interesting, and it would be possible to use them to obtain a mixture of acylglycerides to act as a fat substitute. The final product was composed of about 90% of nutritionally attractive glycerides. These glycerides were medium-chain length triglycerides, medium-long chain triglycerides (mainly triglycerides with medium chain fatty acids at sn-1 and sn-3 positions and long chain fatty acid at sn-2 position), and 1,3-diglycerides. Pseudomonas fluorescens lipase and Burkholderia cepacia lipase immobilized on chitosan demonstrated unusual high activity in the sn-2 esterification of 1,3-dicaprin with palmitic acid at 45 °C and 12 h with 33% yield to 1,3-dicaproyl-2-palmitoyl glycerol. Burkholderia cepacia lipase has the advantage of being immobilized; however, BCL/chitosan has the advantages of being immobilized and therefore its easy recovery from the reaction media.

Cross-Linked Enzyme Aggregates for Applications in Aqueous and Nonaqueous Media

Extensive cross-linking of a precipitate of a protein by a cross-linking reagent (glutaraldehyde has been most commonly used) creates an insoluble enzyme preparation called cross-linked enzyme aggregates (CLEAs). CLEAs show high stability and performance in conventional aqueous as well as nonaqueous media. These are also stable at fairly high temperatures. CLEAs with more than one kind of enzyme activity can be prepared, and such CLEAs are called combi-CLEAs or multipurpose CLEAs. Extent of cross-linking often influences their morphology, stability, activity, and enantioselectivity.

Hybrid Cross-Linked Lipase Aggregates with Magnetic Nanoparticles: A Robust and Recyclable Biocatalysis for the Epoxidation of Oleic Acid

Highly stable and easily recyclable hybrid magnetic cross-linked lipase aggregates (HM-CSL-CLEAs) were prepared by coaggregation of lipase aggregates with nonfunctionalized magnetic nanoparticles and subsequent chemical cross-linking with glutaraldehyde. Analysis by SEM and CLSM indicated that the CLEAs were embedded in nanoparticle aggregates instead of covalently immobilized. The resulting HM-CSL-CLEAs exhibited higher thermostability, storage stability, and reusability than standard CLEAs. For example, HM-CSL-CLEAs maintained >60% of their initial activity after 40 min of incubation at 60 °C, whereas standard CLEAs lost most of their activities. The HM-CSL-CLEAs can be easily recovered from the reaction mixture by an external magnetic field. Moreover, the H2O2 tolerance of the lipase in HM-CSL-CLEAs was also enhanced, which could relieve the inhibitory effect on lipase activity. A high conversion yield (55%) for the epoxidation of oleic acid using H2O2 as oxidizing agent was achieved by HM-CSL-CLEAs.

Preparation and Characterization of Immobilized Lipase from Pseudomonas Cepacia onto Magnetic Cellulose Nanocrystals

Magnetic cellulose nanocrystals (MCNCs) were prepared and used as an enzyme support for immobilization of Pseudomonas cepacialipase (PCL). PCL was successfully immobilized onto MCNCs (PCL@MCNC) by a precipitation-cross-linking method. The resulting PCL@MCNC with a nanoscale size had high enzyme loading (82.2 mg enzyme/g) and activity recovery (95.9%). Compared with free PCL, PCL@MCNC exhibited significantly enhanced stability and solvent tolerance, due to the increase of enzyme structure rigidity. The observable optimum pH and temperature for PCL@MCNC were higher than those of free PCL. PCL@MCNC manifested relatively higher enzyme-substrate affinity and catalytic efficiency. Moreover, PCL@MCNC was capable of effectively catalyzing asymmetric hydrolysis of ketoprofenethyl ester with high yield of 43.4% and product e.e. of 83.5%. Besides, immobilization allowed PCL@MCNC reuse for at least 6 consecutive cycles retaining over 66% of its initial activity. PCL@MCNC was readily recycled by magnetic forces. Remarkably, the as-prepared nanobiocatalyst PCL@MCNC is promising for biocatalysis.

Organic solvent tolerant lipases and applications

Lipases are a group of enzymes naturally endowed with the property of performing reactions in aqueous as well as organic solvents. The esterification reactions using lipase(s) could be performed in water-restricted organic media as organic solvent(s) not only improve(s) the solubility of substrate and reactant in reaction mixture but also permit(s) the reaction in the reverse direction, and often it is easy to recover the product in organic phase in two-phase equilibrium systems. The use of organic solvent tolerant lipase in organic media has exhibited many advantages: increased activity and stability, regiospecificity and stereoselectivity, higher solubility of substrate, ease of products recovery, and ability to shift the reaction equilibrium toward synthetic direction. Therefore the search for organic solvent tolerant enzymes has been an extensive area of research. A variety of fatty acid esters are now being produced commercially using immobilized lipase in nonaqueous solvents. This review describes the organic tolerance and industrial application of lipases. The main emphasis is to study the nature of organic solvent tolerant lipases. Also, the potential industrial applications that make lipases the biocatalysts of choice for the present and future have been presented.