Pigeon pea (Cajanus cajan) pod as a novel eco-friendly biosorbent: a study on equilibrium and kinetics of Ni(II) biosorption

Magnesium-zinc ferrites as magnetic adsorbents for Cr(VI) and Ni(II) ions removal: Cation distribution and antistructure modeling

The magnesium-zinc ferrites Mg_1-xZn_xFe₂O₄ (x = 0…1) were studied as magnetic sorbents for environmental applications. Low-temperature Mössbauer spectroscopy was used to determine the distribution of magnesium and ferric ions in the spinel crystal lattice. The influence of Zn content on magnetic parameters was investigated on the basis of VSM data. As the molar ratio of zinc to magnesium increases from 0 to 1, the pH_PZC value decreases from 10.5 to 8.9. Langmuir and Freundlich models were used to check whether single-layer or multi-layer adsorption occurs. The adsorption of Cr(VI) and Ni(II) ions is well fitted by the Langmuir equation. To check the physical or chemical nature of the sorption process, the Dubinin-Radushkevich equation was used. It was found that the processes of adsorption of Cr(VI) and Ni(II) ions are of a chemical nature. The best Cr(VI) ion adsorption capacity was found for the Mg_0·2Zn_0·8Fe₂O₄ sample (q_e = 30.49 mg/g). The percentage of heavy metal removal by the mixed ferrite samples increases with increasing zinc content. The most effective sorbent for Ni(II) removal is the Mg_0·4Zn_0·6Fe₂O₄ sample (93.2%). Modeling the antistructure provides deeper insight into the mechanism of heavy metal adsorption. The obtained magnesium-zinc ferrites are promising magnetic adsorbents for removing chromate and nickel ions from the environment.

Characterization and valorization of biomass ashes

In India, farming is the primary source of income for many families. Following each harvest, a huge amount of biomass is generated. These are generally discarded as "agrowaste," but recent reports have indicated several beneficial uses for these biomasses and their ashes. However, before the utilization of biomass ashes (BMAs), their chemical and physical properties need to be investigated (characterized) so as to utilize their potential benefit to the fullest. In this paper, eight different biomass ashes (soybean plant ash, mustard plant ash, maize ash, groundnut plant ash, cotton plant ash, wheat plant ash, pigeon peas ash, and groundnut shell ash) were characterized, and their chemical properties are discussed. Surface chemical composition analysis, proximate analysis, and ultimate analysis were performed on all BMA samples, and properties such as porosity, particle density, bulk density, point of zero charge, BET surface area, water-absorption capacity, and bulk parameters such as surface pH and surface charges were determined. BMAs were characterized by SEM and FTIR. The surface areas of biomass ashes vary from 1.9 to 46 m²/g, and point of zero charge for all BMAs exceed 9.8, which confirmed the alkaline nature of these samples. Based on the chemical composition, BMAs are categorized into four types (S, C, K, and CK), and their utilization is proposed based on the type. BMAs find applications in agriculture and construction industries; glass, rubber, and zeolite manufacturing; and in adsorption (as a source of silica/zeolites). The paper also discusses the research challenges and opportunities in utilization of BMAs.