A Nanopore-Structured Nitrogen-Doped Biocarbon Electrocatalyst for Oxygen Reduction from Two-Step Carbonization of Lemna minor Biomass

Utilizing waste duckweed from phytoremediation to synthesize highly efficient FeNxC catalysts for oxygen reduction reaction electrocatalysis

Duckweed is a universal aquatic plant to remove nitrogen source pollutants in the field of phytoremediation. Due to the naturally abundant nitrogen, synthesis of carbon materials from duckweed would be a high-value approach. In oxygen reduction reaction (ORR) of metal-air batteries and fuel cells, non-noble metals and heteroatoms co-doped electrocatalysts with excellent catalytic activity and remarkable stability are promising substitutes for Pt-based catalysts. The first-class ORR performance is determined by appropriate pore structure and active sites, which are strongly associated with the feasible synthesis methods. Herein, a facile one-step synthesis strategy for the transition metals- and nitrogen-codoped carbon (MN_xC) based catalysts with hierarchically porous structure was developed. The MN_xC (M = Fe, Co, Ni, and Mn) active sites were constructed and FeN_xC (D-ZB-Fe) was the best electrocatalyst with excellent ORR performance. Results showed that D-ZB-Fe exhibited an obvious honeycomb porous structure with specific surface area of 1342.91 m²·g^-1 and total pore volume of 1.085 cm³·g^-1. It also possessed considerable active atoms and sites, where the proportion of pyridine N and graphite N was up to 72.9%. The above feature made for a superior ORR electrocatalytic activity. In specific, the onset and half-wave potential were 0.974 V and 0.857 V vs. RHE (Reversible Hydrogen Electrode), respectively. When compared with performances of commercial Pt/C, the four-electron pathway and relatively low peroxide yield, ca. 5%, were almost equivalent. Furthermore, D-ZB-Fe showed an excellent stability and remarkably methanol tolerance by the durability test. In conclusion, this research provides a new synthesis strategy of electrocatalysts with porous structures and active sites.

High-performance nanostructured bio-based carbon electrodes for energy storage applications

Polyacrylonitrile (PAN)-based carbon precursor is a well-established and researched material for electrodes in energy storage applications due to its good physical properties and excellent electrochemical performance. However, in the fight of preserving the environment and pioneering renewable energy sources, environmentally sustainable carbon precursors with superior electrochemical performance are needed. Therefore, bio-based materials are excellent candidates to replace PAN as a carbon precursor. Depending on the design requirement (e.g. carbon morphology, doping level, specific surface area, pore size and volume, and electrochemical performance), the appropriate selection of carbon precursors can be made from a variety of biomass and biowaste materials. This review provides a summary and discussion on the preparation and characterization of the emerging and recent bio-based carbon precursors that can be used as electrodes in energy storage applications. The review is outlined based on the morphology of nanostructures and the precursor's type. Furthermore, the review discusses and summarizes the excellent electrochemical performance of these recent carbon precursors in storage energy applications. Finally, a summary and outlook are also given. All this together portrays the promising role of bio-based carbon electrodes in energy storage applications.

One-step synthesis of a macroporous Cu-g/C3N4 nanofiber electrocatalyst for efficient oxygen reduction reaction

We report a one-step synthesis of a macroporous Cu-g/C3N4 nanofiber catalyst, in which Cu-nanodots (<10 nm) are well coupled with g/C3N4 nanosheets to form Cu-Nx nanorods on the macroporous carbon nanofiber scaffold. The catalyst with a high specific surface area of 514.9 m2 g-1 exposes abundant electroactive sites that facilitate the adsorption of oxygen intermediates and thus exhibits high ORR activity, such as a high half wave potential of 0.83 V and long-term stability over 1000 cycles. The catalyst is a potential substitute for noble metal catalysts.

The Oxygen Reduction Electrocatalytic Activity of Cobalt and Nitrogen Co-doped Carbon Nanocatalyst Synthesized by a Flat Template

The design of noble-metal-free catalysts for oxygen reduction reaction (ORR) is very important to the commercialization of fuel cells. Here, we use a Co-modified montmorillonite (Co-MMT) as a flat template to prepare Co- and N-doped nanocarbon ORR catalysts derived from carbonization of polyaniline at controlled temperatures. The use of flat template can hinder the agglomeration of polyaniline during pyrolysis process and optimize the N-rich active site density on the surface. The addition of transition metal Co in the flat MMT template can largely promote the formation of Co-N sites in prepared catalyst, facilitating the effective improvement of catalytic activity towards the ORR with a direct four-electron transfer pathway. The excellent ORR activity may be mainly attributed to high contents of graphitic N, pyridinic-N, and Co-N configurations. This study opens a new way to rationally design cheap and active ORR catalysts by using simple flat compound as a direct template.