Flexible Photocatalytic Paper with Cu2O and Ag Nanoparticle-Decorated ZnO Nanorods for Visible Light Photodegradation of Organic Dye

Decorating of Ag and CuO on ZnO Nanowires by Plasma Electrolyte Oxidation Method for Enhanced Photocatalytic Efficiency

In this work, photocatalytic performance is divulged in the ternary CuO-Ag-ZnO nanowire synthesized via a two-step approach. The decoration of Ag and CuO nanostructures onto the surface of ZnO nanowires was simply carried out by using the plasma electrolytic oxidation method in a short time. The structure, size, morphology, and optical properties of as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, and spectrophotometry measurements. The diameters of Ag nanoparticles and ZnO nanoflowers are in the range of 5–20 nm and 20–60 nm, respectively. Within the first 15 min, methyl orange was decolorized 96.3 and 82.8% in the CuO-Ag-ZnO and Ag-ZnO, respectively, and there is only about 46.7% of that decomposed in pure ZnO. The CuO-Ag-ZnO shows a higher rate constant k = 0.2007 min−1 and a lower half-life time t = 6.1 min compared to Ag-ZnO and bare ZnO nanowires. The photo-reusability of the ternary nanostructures was estimated to be much outweighed compared to ZnO nanowires. Interestingly, the synergic incorporation between noble metal–semiconductor or semiconductor–semiconductor in the interfaces of Ag-CuO, Ag-ZnO, and CuO-ZnO expands the visible light absorption range and eliminates the photogenerated electron–hole recombination, resulting in a superior visible-light-driven photocatalyst.

Enhanced photocatalytic activity, transport properties and electronic structure of Mn doped GdFeO3 synthesized using the sol-gel process

In this work we have synthesized Mn doped GdFeO3 nano-particles using a green and facile sol gel method and studied their photocatalytic, optical, vibrational and electrical properties. The Rietveld refinement of the XRD profiles suggests that all the materials have an orthorhombic Pbnm crystal structure. The transmission electron microscope (TEM) images show the decrease of the average particle size from 140 to 80 nm with the Mn concentration. The high crystallinity of the synthesized particles is confirmed from the HR-TEM images. Raman spectrum is employed to investigate the phonon modes of the materials. The optical band gap of the materials is obtained from the UV-vis reflectance spectroscopy (DRS) using Tauc relation which indicates the reduction of the band gap from 2.18 to 1.72 eV with Mn-doping. The photocatalytic activity of the materials is studied by the photocatalytic degradation of rhodamine B (Rh-B) in aqueous solution under visible light illumination. The substitution of Mn at the Fe site introduces an extra electronic state between the conduction band and the valence band which reduces the electronic band gap and enhances the Rh-B degradation efficiency. A 30% Mn doping at the Fe site (GFMO3) provides an optimum space charge width which assists to attain the maximum rate of degradation of the Rh-B dye. The doping of Mn3+ reduces the photogenerated electron and hole recombination rate and hence more charge carriers take part in the redox reaction which facilitates the photo-catalytic efficiency in GFMO3. The degradation rate enhances by a factor of 2.5 for GFMO3 as compared to pure GdFeO3. The highest photocurrent density of 1.31 μA cm-2 of GFMO3 with respect to other materials promotes the separation and transfer of the photo generated charge carriers. The possible photocatalytic mechanism of the Mn doped GdFeO3 is also critically discussed. Alternating current impedance spectroscopy is used to study the electrical properties of the synthesized materials. The increase in the conductivity with the Mn concentration is explained on the basis of the band gap reduction and this is consistent with the Smit and Wijn theory. Magnetic measurement is performed to measure the magnetization strength which is useful to separate the photocatalyst by simply using a magnet. The temperature dependent magnetization measurement suggests the anti-ferromagnetic (AFM) behaviour of the studied materials with the decrease of Néel temperature (TN) with Mn concentration. The XPS study reveals the presence of multiple oxidation states of Fe(2+/3+) and Mn(4+/3+) in these materials which facilitates the conductivity as well as the oxidation/reduction efficiency at the surface of the catalyst. The band gap reduction and its effect on the enhancement of the photocatalytic degradation efficiency with Mn doping are also discussed from the density of states calculations. Thus, this study describes a promising approach for the organic pollutant degradation by designing an efficient and stable perovskite photocatalyst.

Metal Oxide-Based Photocatalytic Paper: A Green Alternative for Environmental Remediation

The interest in advanced photocatalytic technologies with metal oxide-based nanomaterials has been growing exponentially over the years due to their green and sustainable characteristics. Photocatalysis has been employed in several applications ranging from the degradation of pollutants to water splitting, CO2 and N2 reductions, and microorganism inactivation. However, to maintain its eco-friendly aspect, new solutions must be identified to ensure sustainability. One alternative is creating an enhanced photocatalytic paper by introducing cellulose-based materials to the process. Paper can participate as a substrate for the metal oxides, but it can also form composites or membranes, and it adds a valuable contribution as it is environmentally friendly, low-cost, flexible, recyclable, lightweight, and earth abundant. In term of photocatalysts, the use of metal oxides is widely spread, mostly since these materials display enhanced photocatalytic activities, allied to their chemical stability, non-toxicity, and earth abundance, despite being inexpensive and compatible with low-cost wet-chemical synthesis routes. This manuscript extensively reviews the recent developments of using photocatalytic papers with nanostructured metal oxides for environmental remediation. It focuses on titanium dioxide (TiO2) and zinc oxide (ZnO) in the form of nanostructures or thin films. It discusses the main characteristics of metal oxides and correlates them to their photocatalytic activity. The role of cellulose-based materials on the systems’ photocatalytic performance is extensively discussed, and the future perspective for photocatalytic papers is highlighted.

Synthesis of Au/CdSe Janus Nanoparticles with Efficient Charge Transfer for Improving Photocatalytic Hydrogen Generation

Metal-semiconductor heterostructures integrate multiply functionalities beyond those of their individual counterparts. Great efforts have been devoted to synthesize heterostructures with controlled morphologies for the applications ranging from photocatalysis to photonic nanodevices. Beyond the morphologies, the interface between two counterparts also significantly influences the performance of the heterostructures. Here, we synthesize Au/CdSe Janus nanostructures consisting of two half spheres of Au and CdSe separated by a flat and high-quality interface. Au/CdSe with other morphologies could also be prepared by adjusting the overgrowth conditions. The photocatalytic hydrogen generation of the Au/CdSe Janus nanospheres is measured to be 3.9 times higher than that of the controlled samples with CdSe half-shells overgrown on the Au nanospheres. The highly efficient charge transfer across the interface between Au and CdSe contributes to the improved photocatalytic performance. Our studies may find the applications in the design of heterostructures with highly efficient photocatalytic activity.

Evidence of oxygen defects mediated enhanced photocatalytic and antibacterial performance of ZnO nanorods

Defect engineered one-dimensional (1D) ZnO nanostructures have found great interest in diverse fields, including water detoxification and environmental remediation. In this article, we report a facile, low-temperature hydrothermal synthesis of defect enriched ZnO nanorods at different pH conditions. The dimension of all the synthesized ZnO nanostructures was restricted to 1D with changes only in their aspect ratios, unlike previous reports where change in morphology accompanies the effect of pH. With an increment in the pH value of the reaction mixture, oxygen defect concentration was controlled and confirmed using XPS and Raman spectroscopy. Considerable increase in optical light absorption and reduction in the bandgap, as inferred from the UV-vis study, corroborating the pH-dependent enrichment of defect states in 1D ZnO. Superior photosensitivity of oxygen defect rich ZnO nanorods was utilized to study their sunlight-induced photocatalytic and bactericidal activity towards its application in wastewater treatment. Within 4 h and 30 min of sunlight exposure (900 W/cm²), a 100% bacterial population (S.aureus, 10⁶ cells/m) killing and complete degradation of methylene blue dye (10μM) were achieved. Enhanced reactive oxidative species (ROS) formation due to the presence of additional oxygen defect states is ascribed to be the prime factor facilitating improved degradation efficiency. Additionally, during the optimization study, ZnO nanorods were found to be active against bacterial cells even in the absence of light opening avenues in antimicrobial food packaging and protective surface coatings.