Influence of Group Modification at the Edges of Carbon Quantum Dots on Fluorescent Emission

Anticancer activity of quantum size carbon dots: opportunities and challenges

Research into the anticancer activity of quantum-sized carbon dots (CDs) has emerged as a promising avenue in cancer research. This CDs delves into the opportunities and challenges associated with harnessing the potential of these nanostructures for combating cancer. Quantum-sized carbon dots, owing to their unique physicochemical properties, exhibit distinct advantages as potential therapeutic agents. Opportunities lie in their tunable size, surface functionalization capabilities, and biocompatibility, enabling targeted drug delivery and imaging in cancer cells. However, we include challenges, a comprehensive understanding of the underlying mechanisms, potential toxicity concerns, and the optimization of synthesis methods for enhanced therapeutic efficacy. A succinct summary of the state of the research in this area is given in this review, emphasizing the exciting possibilities and ongoing challenges in utilizing quantum-sized carbon dots as a novel strategy for cancer treatment.

A novel N-CNDs/PAni modified molecular imprinted polymer for ultraselective and sensitive detection of ciprofloxacin in lentic ecosystems: a dual responsive optical sensor

The research study describes the development of a hybrid nanocomposite called nitro-doped carbon nanodots/polyaniline/molecularly imprinted polymer (N-CNDs/PAni/MIP). This composite is specifically engineered to function as a durable and flexible dual-response sensor to detect and analyze pharmaceutical organic contaminants (POCs). Powder X-Ray diffraction (PXRD), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were employed to perform an exhaustive structural and morphological analysis of N-CNDs/PAni/MIP. N-CNDs/PAni/MIP emitted blue luminescence under ultraviolet irradiation and exhibited typical excitation-dependent emission properties. It can act as fluorescent probe for the detection of CIPRO with high selectivity and sensitivity with an IF value of 4.2. Furthermore, N-CNDs/PAni/MIP exhibited high peroxidase-like catalytic behavior. After adding CIPRO to the N-CNDs/PAni/MIP/TMB/H2O2 system, the blue color of the solution faded due to the reduction of blue ox-TMB to colorless TMB. Based on these two phenomena, with CIPRO as the target analyte, the N-CNDs/PAni/MIP dual sensor showed a minimal detection limit of 70 pM for the fluorescent signaling platform and 3.5 nM for the colorimetric probe with a linear range of 0.038-200 nM. The fluorometric and colorimetric assays based on N-CNDs/PAni/MIP for CIPRO detection were then successfully applied to lentic water as well as to tap water samples, demonstrating the sensitivity and dependability of the instrument. Furthermore, the synthesized PVA (N-CNDs/PAni/MIP) films enable the recognition of CIPRO, and these films have the potential to be integrated into portable sensing devices, providing a practical solution for rapid and on-site detection of CIPRO in various samples.

Assessment of biomass-derived carbon dots as highly sensitive and selective templates for the sensing of hazardous ions

Access to safe drinking water and a hygienic living environment are the basic necessities that encourage healthy living. However, the presence of various pollutants (especially toxic heavy metal ions) at high concentrations in water renders water unfit for drinking and domestic use. The presence of high concentrations of heavy-metal ions (e.g., Pb2+, Hg2+, Cr6+, Cd2+, or Cu2+) greater than their permissible limits adversely affects human health, and increases the risk of cancer of the kidneys, liver, skin, and central nervous system. Therefore, their detection in water is crucial. Due to the various benefits of "green"-synthesized carbon-dots (C-dots) over other materials, these materials are potential candidates for sensing of toxic heavy-metal ions in water sources. C-dots are very small carbon-based nanomaterials that show chemical stability, magnificent biocompatibility, excitation wavelength-dependent photoluminescence (PL), water solubility, simple preparation strategies, photoinduced electron transfer, and the opportunity for functionalization. A new family of C-dots called "carbon quantum dots" (CQDs) are fluorescent zero-dimensional carbon nanoparticles of size < 10 nm. The green synthesis of C-dots has numerous advantages over conventional chemical routes, such as utilization of inexpensive and non-poisonous materials, straightforward operations, rapid reactions, and renewable precursors. Natural sources, such as biomass and biomass wastes, are broadly accepted as green precursors for fabricating C-dots because these sources are economical, ecological, and readily/extensively accessible. Two main methods are available for C-dots production: top-down and bottom-up. Herein, this review article discusses the recent advancements in the green fabrication of C-dots: photostability; surface structure and functionalization; potential applications for the sensing of hazardous anions and toxic heavy-metal ions; binding of toxic ions with C-dots; probable mechanistic routes of PL-based sensing of toxic heavy-metal ions. The green production of C-dots and their promising applications in the sensing of hazardous ions discussed herein provides deep insights into the safety of human health and the environment. Nonetheless, this review article provides a resource for the conversion of low-value biomass and biomass waste into valuable materials (i.e., C-dots) for promising sensing applications.

Nitrogen and sulfur co-doped carbon quantum dots as "on-off-on" fluorescence probes to detect Hg2+ and MnO4- and improving the photostability of Rhodamine B

BACKGROUND

Carbon quantum dot (CQDs) are zero-dimensional carbon nanomaterials with a size of less than 10 nm CQDs are widely used in the field of ion detection by virtue of their fluorescence characteristics such as strong fluorescence intensity, good optical stability and tunable emission wavelength. Although the traditional atomic absorption method, electrochemical method and other metal ion detection methods are highly sensitive, the operation is complex, expensive and limited by the site. Therefore, we prepared the N, S-CQDs capable of detecting Hg2+ and MnO4- in water with the advantages of simple operation, low cost, and direct visual signal.

RESULTS

N, S-CQDs with high-quantum yield (77.68%), uniform particle size (0.4 nm-2.6 nm) and green fluorescence were created utilizing a one-pot hydrothermal process with the precursors ASDA-Na4 and m-phenylenediamine. N, S-CQDs has good optical properties such as high fluorescence intensity, wavelength independence, up-conversion luminescence and fluorescence stability. We examined 27 common ions in water and found that the fluorescence of N, S-CQDs could be selectively quenched by Hg2+ and MnO4-, and the detection limits are 0.41 μM and 1.2 μM, respectively. The mechanism of quenching is further investigated. The fluorescence of N, S-CQDs-Hg2+ system can be restored by halogen ions (Cl-, Br-, I-), while the fluorescence of N, S-CQDs-MnO4- system can be partially restored by Fe2+. This forms an "on-off-on" mode of fluorescent probes. In addition, we also studied that trace amounts of N, S-CQDs can improve the photostability of RhB.

SIGNIFICANCE

The N, S-CQDs are fluorescent probes in an "on-off-on" mode. N, S-CQDs with green fluorescence (on) can be quenched by Hg2+ and MnO4- (off). The fluorescence quenched by Hg2+ can be restored by halogen ions again, while the fluorescence quenched by MnO4- can partially be restored (on). This ion detection method can be used to visually detect the two ions in the field, with the advantages of low cost, simple operation and visual intuition.

Dual targeting of Mg/N doped-carbon quantum dots with folic and hyaluronic acid for targeted drug delivery and cell imaging

Mg/N doped-carbon quantum dots (CQDs) with dual drug targeting and cell imaging properties was synthesized. Mg/N doped-CQDs synthesized by a hydrothermal method. Operating pyrolysis parameters such as temperature, time, and pH were optimized to achieve CQDs with high quantum yield (QY). This CQD applied in cellular imaging. For the first time, dual active targeting of Mg/N doped CQDs performed using folic acid and hyaluronic acid (CQD-FA-HA). Then, epirubicin (EPI) loaded on this nanocarrier as the final complex (CQD-FA-HA-EPI). Cytotoxicity analysis, cellular uptake, and cell photography performed for the complex on three cell lines, including 4T1, MCF-7, and CHO. In vivo studies were performed in BALB/c inbred female mice models bearing breast cancer. Characterization results showed the successful formation of Mg/N doped-CQDs with a high QY of 89.44%. In vitro drug release approved pH dependency of synthesized nanocarrier with a controlled release behavior. Cytotoxicity tests and cellular uptake results demonstrated increased toxicity and absorption into 4T1 and MCF-7 cell lines for targeted nanoparticles compared to free drug. In cell imaging, an increase in the entry of the complex into 4T1 and MCF-7 cells compared to free drug, confirmed the proper function of the synthesized complex. In vivo results indicated that the tumor volume of mice receiving CQD-FA-HA-EPI was the lowest among other studied groups, along with the lowest damage to the liver, spleen, and heart according to the histopathological analysis. Finally, CQD-FA-HA proposed as a novel platform with tumor targeting, drug carrier, and photoluminescence properties.

High luminescent N,S,P co-doped carbon dots for the fluorescence sensing of extreme acidity and folic acid

Carbon dots are popular luminescent materials because of their excellent fluorescence properties, but the low quantum yield limits their application. Heteroatom doping is a more convenient and popular approach to increase the quantum yield of carbon dots. Here, novel N,S,P heteroatom co-doped carbon dots (N,S,P-CDs) were synthesized by a simple one-step hydrothermal method using m-phenylenediamine, L-cysteine and phosphoric acid as raw materials. The as-prepared N,S,P-CDs showed excellent photoluminescence properties with a fluorescence quantum yield of up to 41%, which greatly encourages their application in fluorescence sensing. The N,S,P-CDs exhibited good fluorescence stability under salt solution, xenon lamp irradiation and ultraviolet lamp irradiation except for a high sensitivity to extreme acidity. The fluorescence intensity of the N,S,P-CDs can be decreased by as much as 85% when the pH of the solution changes from 2.50 to 4.75, that is, a small fluctuation in pH can cause an intense response of the fluorescence of the N,S,P-CDs. Therefore, an excellent fluorescence sensing platform for accurately monitoring the pH of extreme acidity has been constructed. In addition, the N,S,P-CDs can be applied for quantitative detection of folic acid based on the strong quenching effect of folic acid on the fluorescence of the N,S,P-CDs. Good linearity was obtained in the concentration range of 4.85-82.45 μM, with a detection limit of 0.148 μM. The constructed sensing platform was used for the determination of folic acid in actual samples of orange juice, oatmeal and tablets with satisfactory results.

Fluorescence origin and chirality mechanism of graphene quantum Dots: Twist or Non-Twist?

In this paper, we theoretically investigate the fluorescence origin and chirality mechanism of graphene quantum dots with non-twist and twist geometries, respectively. It is revealed that twist is not necessary for fluorescence; but twist is must for the chirality, which can significantly enhance the intensity of chirality, demonstrated by ECD spectra. Our results provide deeper understanding on the physical mechanism of fluorescence and chirality of graphene quantum dot influenced by geometric twist.

Nitrogen, sulfur, and phosphorus Co-doped carbon dots-based ratiometric chemosensor for highly selective sequential detection of Al3+ and Fe3+ ions in logic gate, cell imaging, and real sample analysis

Heteroatom-doped photoluminescent (PL) carbon dots (CDs) have recently gained attention as optical sensors due to their excellent tunable properties. In this work, we propose a one-pot hydrothermal synthesis of PL nitrogen (N), sulfur (S), and phosphorus (P) co-doped carbon dots (NSP-CDs) using glutathione and phosphoric acid (H₃PO₄) as precursors. The synthesized NSP-CDs were characterized using different spectroscopic and microscopic techniques, including ultraviolet-visible (UV-Vis) spectroscopy, fluorescence spectroscopy, Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. The NSP-CDs exhibited excellent PL properties with green emission at 492 nm upon excitation at 417 nm, a high quantum yield of 26.7%, and dependent emission behavior. The as-prepared NSP-CDs were spherical with a well-monodispersed average particle size of 5.2 nm. Moreover, NSP-CDs demonstrate high PL stability toward a wider pH, high salt ionic strength, and various solvents. Furthermore, the NSP-CDs showed a three-state "off-on-off" PL response upon the sequential addition of Al³⁺ and Fe³⁺ ions, with a low limit of detection (LOD) of 10.8 nM for Al³⁺ and 50.7 nM for Fe³⁺. The NSP-CD sensor can construct an INHIBIT logic gate with Al³⁺ and Fe³⁺ ions as the chemical inputs and emissions as the output mode. Owing to an excellent tunable PL property and biocompatibility, the NSP-CDs were applied for sensing Al³⁺ and Fe³⁺ ions as well as live cell imaging. Furthermore, NSP-CDs were designed as PL sensors for detecting Al³⁺ and Fe³⁺ ions in real water show their potential application.

Fluorescent property of carbon dots extracted from cigarette smoke and the application in bio-imaging

Cigarette smoke is one of the six major pollution sources in the room air. It contains large number of particles with size less than 10 nm. There exist carbon dots (CDs) in cigarette smoke which have strong fluorescence and with good bio-compatibility and low toxicity. CDs in cigarette smoke can be applied in bio-imaging which has great potential applications in the integration of cancer diagnosis and treatment. In this paper, CDs were extracted from cigarette smoke. Then, sodium borohydride was added to CDs aqueous solution for reduction and the reduced CDs (R-CDs) were used for biological cell imaging. The results indicate that the CDs with the particle size <10 nm in cigarette smoke are self-assembled by the polymerizated polycyclic aromatic hydrocarbons (PAHs) and ammonium nitrite which are disk nano-structure composed of sp²/sp³ carbon and oxygen/nitrogen groups or polymers. Sodium borohydride can reduce the carbonyl group on the surface of CDs to hydroxyl group and increase the ratio of the Na 1s ratio of the CDs from 1.86 to 7.42. The CDs can emit blue fluorescence under ultraviolet irradiation. After reduction, the R-CDS have the intensity of fluorescence 7.2 times than before and the fluorescence quantum yield increase from 6.13% to 8.86%. The photoluminescence (PL) wavelength of R-CDS have red-shift of 7 nm which was due to the increasing of Na element ratio. The onion epidermal cells labeled with R-CDs show that the CDs could pass through the cell wall into the cell and reach the nucleus. The cell wall and the nucleus could be clearly visualized. CDs also shows low toxicity to human bronchial epithelial cells (BEAS-2B) with good biological activity. The obtained results indicate that the CDs and R-CDs have good fluorescent property which could be used as bio-imaging agent.

Cation-π aggregation-induced white emission of moisture-resistant carbon quantum dots: a comprehensive spectroscopic study

Controlling mechanisms involved in the aggregation of carbon quantum dots (CQDs) can lead to new application developments for these quantum dot materials. In this study, an unusual aggregation-induced white emission of CQDs with strong intrinsic green emission is reported. Due to the deprotonation/protonation of the surface functional groups during the aggregation of CQDs induced by pH variations of the solution through the addition of sodium hydroxide, and hydrophobic interactions between CQDs, it results in the formation of aggregated CQDs through an avalanche-like process. Our results suggest that sodium hydroxide not only plays a critical role in the formation of strong cation-π interactions, but also polishes the surface of CQDs, leading to the formation of the aggregated CQDs. The aggregated CQDs present excellent dispersibility characteristics in water. Moreover, optical studies suggest a combined aggregation mechanism in the presence of both J-type and H-type aggregation monoliths involved in forming the aggregated CQDs. The findings obtained from the deconvolution of the as-synthesized CQDs can perceptively elucidate the cation-π aggregation process.

Zn-assisted modification of the chemical structure of N-doped carbon dots and their enhanced quantum yield and photostability

This article presents the Zn-assisted synthesis of N-doped carbon dots (N-CDs) with an enhanced quantum yield (QY) and photostability. There have been intensive studies to improve or tune the optical properties of carbon dots (CDs) to meet the demand for luminescent materials in various fields, including energy conversion, photocatalysis, bioimaging, and phototherapy. For these applications, the photostability of the CDs is also a critical factor, but the related studies are relatively less common. The Zn-assisted N-CDs (denoted as Zn:N-CDs) obtained by the addition of Zn(OAc)2 to the precursors during the synthesis of N-CDs not only exhibited an enhanced quantum yield but also improved photostability compared to those of N-CDs. A comprehensive study of the chemical composition of Zn:N-CD and N-CD using X-ray photoelectron spectroscopy indicated a correlation between their chemical structure and photostability. Zn(OAc)2, which acts as a catalytic reagent, induced the modification of chemical structures at the edges of carbogenic sp2 domains, without being doped in N-CD, and the heteroatom-carbon bonds in Zn:N-CD seemed to be more resistant to light compared to those in N-CDs. The increased QY and photostability of Zn:N-CDs make them more suitable as an optical probe and they could be used in fingerprint identification. With Zn:N-CDs, the microstructure of fingerprints was confirmed clearly for a long duration effectively.

Carbon Quantum Dots' Synthesis with a Strong Chemical Claw for Five Transition Metal Sensing in the Irving-Williams Series

Carbon quantum dots (CQDs) are an excellent eco-friendly fluorescence material, ideal for various ecological testing systems. Herein, we establish uniform microwave synthesis of the group of carbon quantum dots with specific functionalization of ethylenediamine, diethylenetriamine, and three types of Trilon (A, B and C) with chelate claws -C-NH3. CQDs' properties were studied and applied in order to sense metal cations in an aquatic environment. The results provide the determination of the fluorescence quench in dots by pollutant salts, which dissociate into double-charged ions. In particular, the chemical interactions with CQDs' surface in the Irving-Williams series (IWs) via functionalization of the negatively charged surface were ascribed. CQD-En and CQD-Dien demonstrated linear fluorescence quenching in high metal cation concentrations. Further, the formation of claws from Trilon A, Trilon B, and C effectively caught the copper and nickel cations from the solution due to the complexation on CQDs' surface. Moreover, CQD-Trilon C presented chelating properties of the surface and detected five cations (Cu2+, Ni2+, Ca2+, Mg2+, Zn2+) from 0.5 mg/mL to 1 × 10-7 mg/mL in the Irving-William's series. Dependence was mathematically attributed as an equation (ML regression model) based on the constant of complex formation. The reliability of the data was 0.993 for the training database.

Synthesis, Purification, and Characterization of Carbon Dots from Non-Activated and Activated Pyrolytic Carbon Black

In this work, carbon dots were created from activated and non-activated pyrolytic carbon black obtained from waste tires, which were then chemically oxidized with HNO3. The effects caused to the carbon dot properties were analyzed in detail through characterization techniques such as ion chromatography; UV-visible, Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy; ζ potential; transmission electron microscopy (TEM); and spectrofluorometry. The presence of functional groups on the surface of all carbon dots was revealed by UV-visible, FTIR, XPS, and Raman spectra. The higher oxidation degrees of carbon dots from activated precursors compared to those from nonactivated precursors resulted in differences in photoluminescence (PL) properties such as bathochromic shift, lower intensity, and excitation-dependent behavior. The results demonstrate that the use of an activating agent in the recovery of pyrolytic carbon black resulted in carbon dots with different PL properties. In addition, a dialysis methodology is proposed to overcome purification obstacles, finding that 360 h were required to obtain pure carbon dots synthesized by a chemical oxidation method.

Carbon Dots: Synthesis, Properties and Applications

Carbon dots (CDs) are known as the rising star of carbon-based nanomaterials and, by virtue of their unique structure and fascinating properties, they have attracted considerable interest in different fields such as biological sensing, drug delivery, photodynamic therapy, photocatalysis, and solar cells in recent years. Particularly, the outstanding electronic and optical properties of the CDs have attracted increasing attention in biomedical and photocatalytic applications owing to their low toxicity, biocompatibility, excellent photostability, tunable fluorescence, outstanding efficient up-converted photoluminescence behavior, and photo-induced electron transfer ability. This article reviews recent progress on the synthesis routes and optical properties of CDs as well as biomedical and photocatalytic applications. Furthermore, we discuss an outlook on future and potential development of the CDs based biosensor, biological dye, biological vehicle, and photocatalysts in this booming research field.

Cyclodextrin-modified graphene quantum dots as a novel additive for the selective separation of bioactive compounds by capillary electrophoresis

Highly reliable separation and determination of various biologically active compounds were achieved using capillary electrophoresis (CE) based on β-cyclodextrin-functionalized graphene quantum dots (βcd-GQDs) as the background electrolyte additive. βcd-GQDs improve the separation efficiency between peaks of all analytes. No addition of surfactants or organic solvents was needed in the running buffer containing βcd-GQDs. Up to eight consecutive runs were acquired with high precision for the separation of resveratrol, pyridoxine, riboflavin, catechin, ascorbic acid, quercetin, curcumin, and even of several of their structural analogs. Baseline separation was achieved within just 13 min as a result of the effective mobility of the analytes along the capillary owing to the differential interaction with the additive. The proposed analytical method displayed a good resolution of peaks for all species selecting two absorption wavelengths in the diode array detector. Detection limits lower than 0.28 µg mL^-1 were found for all compounds and precision values were in the range of 2.1-4.0% in terms of the peak area of the analytes. The usefulness of the GQD-assisted selectivity-enhanced CE method was verified by the analysis of food and dietary supplements. The applicability to such complex matrices and the easy and low-cost GQD preparation open the door for routine analyses of food and natural products. The concept of using such a dual approach (macromolecules and nanotechnology) has been explored to tackle the separation of various bioactive compounds in nutritional supplements and food. Schematic illustration of the electrophoretic separation of the bioactive molecules in the capillary which is filled with the running solution without (top) and with βcd-GQDs (bottom). The fused silica capillary with negatively ionizable silanol groups at the wall. The voltage is applied at positive polarity at the outlet. R, riboflavin; r, resveratrol; P, pyridoxine; C, catechin; c, curcumin; A, ascorbic acid; Q, quercetin.

A photonic dual nano-hybrid assay for detection of cell-free circulating mitochondrial DNA

Circulating cell free mitochondrial DNA (ccf-mtDNA) has emerged as a potential marker for diagnosis and prognosis of different chronic and age associated non-communicable diseases. Therefore, owing to its biomarker potential, we herein assessed a novel nano-photonic dual hybrid assay system for rapid and specific detection of ccf-mtDNA. The assay comprised of two systems, i.e. a capture and screen facet containing aminopyrene tethered carbon quantum dots for effective screening of circulating cell free nucleic acids (ccf-NAs) and a quantum dot conjugated probe for precise detection of ccf-mtDNA in the screened ccf-NAs. Our observations suggested that the developed dual-assay system possesses high feasibility and selectivity in screening of ccf-NAs and estimation of ccfmtDNA in a given sample. It also offers high versatility of measurement in different analytical platforms, indicating the translational potential of the method for possible disease risk assessment in control and field settings.

Influence of carbon nano-dots in water on sonoluminescence

Sonoluminescence (SL) occurs when acoustically induced oscillating bubbles in a liquid collapse. The SL from pure water normally generates ultraviolet to blue emission which is related to hydroxyl plasma formed in and around the bubbles. It is known that carbon nano-dots (CNDs) can serve as free radical captors, where the C-bonds can couple strongly with free radicals and form C-based functional groups. In this work, a SL experiment is conducted via placing CND aqueous solution (CNDAS) in the focal area of the SL apparatus. Unexpectedly and dramatically, it is found that the color of SL now turns orange, which is so bright that it can be seen even by the naked eye. By examining the CNDAS before and after the SL experiment, it is observed that the influence of CNDs on optical absorption, photoluminescence and SL is mainly achieved via coupling between the C-bonds in the CNDs and the free hydroxyl radicals generated during the processes of acoustically driven cavitation and SL. The interesting and important findings from this work demonstrate that the CNDs in water can modify significantly the SL effect. Thus, CNDs can provide a new test medium for studying and revealing the microscopic mechanism of the SL phenomenon.

A sustainable green synthesis of functionalized biocompatible carbon quantum dots from Aloe barbadensis Miller and its multifunctional applications

Herein, we demonstrated a sustainable green approach for the preparation of fluorescent biocompatible carbon quantum dots by microwave-assisted reflux synthesis from Aloe barbadensis Miller (Aloe vera) extract. The Transmission Electron Microscopic images reveal that the as-prepared CQDs are spherical with less than 5 nm in size. The CQDs are amorphous, showed an excitation-independent behaviour, emitted blue fluorescence and have a fluorescence quantum yield of 31%. The presence of -OH groups contributed to the blue emission and helped CQDs to disperse uniformly in an aqueous solution. The prepared CQDs were employed as a photocatalyst for the environmental remediation to degrade the anionic dye, eosin yellow under visible light irradiation. The results showed that the CQDs exhibited excellent photocatalytic efficiency of 98.55% within 80 min and a 100% efficiency within 100 min. Further, the cytotoxic properties of as-prepared CQDs are investigated in the MCF-7 breast cancer cell line using MTT assay. The results demonstrated a notable reduction in cell viability in a dose-subjected manner, and the cell viability decreased to 50% (IC₅₀) at a concentration of 52.2 ± 1.35 μg/mL. Furthermore, cellular internalization of CQDs in breast cancer cells is studied. As expected, CQDs are found to internalize by the cancer cells with blue emission as revealed by fluorescence microscope. In the end, CQDs in human breast cancer cells demonstrate the anti-proliferative effect and are found to be an impressive fluorescent probe for live-cell imaging, paving a path for its potential biomedical applications.

Green synthesis of white light emitting carbon quantum dots: Fabrication of white fluorescent film and optical sensor applications

In this work, we have reported on the facile synthesis of white light-emitting carbon quantum dots (CQD) from corncob by hydrothermal method. This CQD has a broad emission from 380 nm to 650 nm with high photoluminescence intensity even after three months of shelf-life and stable at variable pH conditions. The presence of Si and N impurities in the biomass gives a greater advantage in producing white light emission with high quantum yield (54%) and enhanced lifetime at ambient conditions. The CQD is highly sensitive towards DNA, paracetamol, Pb²⁺, Cu²⁺, Fe³⁺, and Cr³⁺ fluorescence sensing and signifies its application as a multi-modal fluorescence sensor. The results of optical sensitivity calculated from the linear range of 1-10 ng/mL, 0.10-0.30 mg/mL, 2.5446 ng/mL, 0.0694 mg/mL, 0.3103-1.5515 μM/mL, 0.4299-4.7293 μM/mL, 1.3010 μM/mL and 0.05-2.5 μM/mL. The limit of detection is 2.5446 ng/mL, 0.0694 mg/mL, 0.8641 μM/mL, 1.2454 μM/mL, 1.3010 μM/m, 0.8550 μM/mL and 2.8562 μM/mL, respectively. And also, the relative standard deviation values of 2.30%, 4.46%, 1.79%, 1.84%, 0.26%, 1.23% and 0.35% are evidences its possibility of development towards potential optical sensor applications. Flexible white light-emitting sheets were fabricated from the CQD, illuminates uniform brightness, and has good color reproducibility and higher stability under various UV light excitation.

Carbon Quantum Dots Derived from Different Carbon Sources for Antibacterial Applications

Nanoparticles possess unique features due to their small size and can be composed of different surface chemistries. Carbon quantum dots possess several unique physico-chemical and antibacterial activities. This review provides an overview of different methods to prepare carbon quantum dots from different carbon sources in order to provide guidelines for choosing methods and carbon sources that yield carbon quantum dots with optimal antibacterial efficacy. Antibacterial activities of carbon quantum dots predominantly involve cell wall damage and disruption of the matrix of infectious biofilms through reactive oxygen species (ROS) generation to cause dispersal of infecting pathogens that enhance their susceptibility to antibiotics. Quaternized carbon quantum dots from organic carbon sources have been found to be equally efficacious for controlling wound infection and pneumonia in rodents as antibiotics. Carbon quantum dots derived through heating of natural carbon sources can inherit properties that resemble those of the carbon sources they are derived from. This makes antibiotics, medicinal herbs and plants or probiotic bacteria ideal sources for the synthesis of antibacterial carbon quantum dots. Importantly, carbon quantum dots have been suggested to yield a lower chance of inducing bacterial resistance than antibiotics, making carbon quantum dots attractive for large scale clinical use.

Passivated graphene quantum dots for carbaryl determination in juices

This paper reports a simple method for the preparation of suitable graphene quantum dots after surface passivation, to be used for the determination of carbaryl in juice samples. A comparison of synthetic conditions for the preparation of graphene quantum dots following the top-down approach is described. In the one-step route selected, evaluation of diverse reaction time for cutting and modulating the oxidizing sites in the broken pieces of the initial graphene layer is conducted with a mixture of concentrated acids. Exploring the passivation effect on the purified graphene quantum dots, we demonstrated the suitability of the selected graphene quantum dots for practical application in the detection of carbaryl using fluorometric detection. Higher sensitivity was achieved after 8 min of contact, in which graphene quantum dots promotes the degradation of carbaryl into naphthol, being the latter responsible for the analytical signal. The detection and quantification limits were 0.36 and 1.21 μg/L, respectively, being the response linear up to 26 μg/L with excellent precision (better than 3.2% at the limit of detection). The recovery of the analyte from commercial juice samples (91.4-96.7%) testifies to the applicability of the proposal for the analytical problem selected.

Biomass-Derived Nitrogen Functionalized Carbon Nanodots and Their Anti-Biofouling Properties

The prevalence of the antibiotic resistant bacteria remains a global issue. Cheap, sustainable and multifunctional antibacterial membranes are at the forefront of filtrating materials capable of treating multiple flow streams, such as water cleansing treatments. Carbon nanomaterials are particularly interesting objects shown to enhance antibacterial properties of composite materials. In this article, amino-functionalized, photoluminescent carbon nanodots (CNDs) were synthesized from chitosan by bottom-up approach via simple and green hydrothermal carbonization. A chemical model for the CNDs formation during hydrothermal treatment of chitosan is proposed. The use of urea as an additional nitrogen source leads to the consumption of hydroxyl groups of chitosan and higher nitrogen doping level as pyridinic and pyrrolic N-bonding configurations in the final carbonaceous composition. These functionalized carbon nanodots that consist of carbon core and various surface functional groups were used to modify the commercially available membranes in order to enhance their anti-biofouling properties and add possible functionalities, including fluorescent labelling. Incorporation of CNDs to membranes increased their hydrophilicity, surface charge without compromising membranes integrity, thereby increasing the factors affecting bacterial wall disruption. Membranes modified with CNDs effectively stopped the growth of two Gram-negative bacterial colonies: Klebsiella oxytoca (K. oxytoca) and Pseudomonas aeruginosa (P. aeruginosa).

The analytical and biomedical applications of carbon dots and their future theranostic potential: A review

In recent years, carbon dots (C-dots) have gained appreciable interest owing to their unique optical properties, including tunable fluorescence, stability against photobleaching and photoblinking, and strong fluorescence. Simple and low-cost hydrothermal and electrochemical approaches have been widely used in the preparation of biocompatible and high-quality C-dots. Various C-dots have been used for the quantitation of small analytes, mostly based on analyte induced fluorescence quenching. Depending on the nature of precursors, synthetic conditions (such as reaction temperature and time), and surface conjugation, multi-function C-dots can be prepared and used in diagnostics and therapeutics. Their strong fluorescence and photostability, enables use in cell imaging. Their biological activity from the surface residues and capability of generating reactive oxygen species, have allowed many C-dots to become candidates as antibacterial and anticancer reagents. After suitable conjugation, biocompatible and fluorescent C-dots can be used for diagnostics and therapeutics, thus, showing their great potential in the area of theranostics.

Carbon-Based Quantum Dots with Solid-State Photoluminescent: Mechanism, Implementation, and Application

Carbon-based quantum dots (CQDs), including spherical carbon dots and graphene quantum dots, are an emerging class of photoluminescent (PL) materials with unique properties. Great progress has been made in the design and fabrication of high-performance CQDs, however, the challenge of developing solid-state PL CQDs have aroused great interest among researchers. A clear PL mechanism is the basis for the development of high-performance solid-state CQDs for light emission and is also a prerequisite for the realization of multiple practical applications. However, the extremely complex structure of a CQD greatly limits the understanding of the solid-state PL mechanism of CQDs. So far, a variety of models have been proposed to explain the PL of solid-state CQDs, but they have not been unified. This review summarizes the current understanding of the solid-state PL of solid-state CQDs from the perspective of energy band theory and electronic transitions. In addition, the common strategies for realizing solid-state PL in CQDs are also summarized. Furthermore, the applications of CQDs in the fields of light-emitting devices, anti-counterfeiting, fingerprint detection, etc., are proposed. Finally, a brief outlook is given, highlighting current problems, and directions for development of solid-state PL of CQDs.

Synthesis and Characterization of Green Carbon Dots for Scavenging Radical Oxygen Species in Aqueous and Oil Samples

Carbon dots (CDs) due to their unique optical features, chemical stability and low environmental hazard are applied in different fields such as metal ion sensing, photo-catalysis, bio-imaging and tribology, among others. The aims of the present research were to obtain CDs from vegetable wastes (tea and grapes) as carbon sources and to explore their potential properties as radical scavengers. CDs from glutathione/citric acid (GCDs) were synthetized for comparison purposes. The CDs were investigated for their chemical structure, morphology, optical and electronical properties. The antioxidant activity has been explored by DPPH and Folin-Ciocelteau assays in aqueous media. Due to their solubility in oil, the CDs prepared from tea wastes and GCDs were assayed as antioxidants in a mineral oil lubricant by potentiometric determination of the peroxide value. CDs from tea wastes and GCDs exhibited good antioxidant properties both in aqueous and oil media. Possible mechanisms, such as C-addition to double bonds, H-abstraction and SOMO-CDs conduction band interaction, were proposed for the CDs radical scavenging activity. CDs from natural sources open new application pathways as antioxidant green additives.

Green one-pot synthesis of nitrogen and sulfur co-doped carbon quantum dots as new fluorescent nanosensors for determination of salinomycin and maduramicin in food samples

A simple green hydrothermal method was proposed for synthesis of highly fluorescent nitrogen and sulfur co-doped carbon quantum dots (N,S-CQDs) using citric acid and thiosemicarbazide. The produced N,S-CQDs were subjected to extensive spectroscopic characterization and applied as fluorescent nanosensors for the sensitive spectrofluorimetric determination of salinomycin and maduramicin directly without prior derivatization for the first time. The obtained N,S-CQDs showed strong emission band at 430 nm after excitation at 360 nm. The native fluorescence of N,S-CQDs was found to be quenched by the addition of increased concentrations of each drug. Method validation revealed a wide linear relationship between the fluorescence quenching of N,S-CQDs and the concentration of each drug in the range of 10.0-300.0 μM with detection limits of 2.07 μM and 1.34 μM for salinomycin and maduramicin, respectively. The developed method has been efficiently applied for estimation of analytes in six raw matrices with high recoveries.