Exploring the Coordination Effect of GO@MOF-5 as Catalyst on Thermal Decomposition of Ammonium Perchlorate

Agar-tragacanth/silk fibroin hydrogel containing Zn-based MOF as a novel nanobiocomposite with biological activity

In this study, a novel nanobiocomposite consisting of agar (Ag), tragacanth gum (TG), silk fibroin (SF), and MOF-5 was synthesized and extensively investigated by various analytical techniques and basic biological assays for potential biomedical applications. The performed Trypan blue dye exclusion assay indicated that the proliferation percentage of HEK293T cells was 71.19%, while the proliferation of cancer cells (K-562 and MCF-7) was significantly lower, at 10.74% and 3.33%. Furthermore, the Ag-TG hydrogel/SF/MOF-5 nanobiocomposite exhibited significant antimicrobial activity against both E. coli and S. aureus strains, with growth inhibition rates of 76.08% and 69.19% respectively. Additionally, the hemolytic index of fabricated nanobiocomposite was found approximately 19%. These findings suggest that the nanobiocomposite exhibits significant potential for application in cancer therapy and wound healing.

Adsorptive Elimination of a Cationic Dye and a Hg (II)-Containing Antiseptic from Simulated Wastewater Using a Metal Organic Framework

Several types of pollutants have acute adverse effects on living bodies, and the effective removal of these pollutants remains a challenge. Safranin O (a biological dye) and merbromin (a topical mercury-containing antiseptic) are considered organic pollutants, and there are only a few reports on their removal. Synthesized and well-characterized (through PXRD, FTIR, FESEM, and EDS analysis) MOF-5 was used for the first time in the removal of safranin O and merbromin from simulated wastewater and real wastewater. In both cases, MOF-5 effectively removed contaminants. We found that in simulated wastewater, the highest efficiency of removal of safranin O was 53.27% (for 15 mg/L) at pH 10, and for merbromin, it was 41.49% (for 25 mg/L) at pH 6. In the case of real wastewater containing natural ions (Na+, K+, F-, Cl-, SO42-, PO43-, Mg2+, and Ca2+) and other molecules, the removal efficiencies of these two dyes decreased (34.00% and 26.28% for safranin O and merbromin, respectively) because of the presence of other ions and molecules. A plausible mechanism for the removal of these pollutants using MOF-5 was proposed.

Understanding the influence of secondary building units on the thermal conductivity of metal-organic frameworks via high-throughput computational screening

The thermal conductivity of metal-organic frameworks (MOFs) has garnered increasing interest due to their potential applications in energy-related fields. However, due to the diversity of building units, understanding the relationship between MOF structures and their thermal conductivity remains an imperative challenge. In this study, we predicted the thermal conductivity (κ) of MOFs using equilibrium molecular dynamics (EMD) simulations and investigated the contribution of structure properties to their thermal conductivity. It is revealed that the arrangement of secondary building units (SBUs) with a closer distance of metal atoms, a larger proportion of metal elements, and transition metal elements (Fe, Mn, and Co) leads to high thermal conductivity. To generally quantify the influence of such factors on thermal conductivity, the pathway factors with SBU influence (Pm) were proposed and can be used to efficiently classify structures into high, medium, and low thermal conductivity types. It was found that Pm indicates that MOFs with met topology tend to have high thermal conductivity, while rna and pcu topologies naturally tend to possess medium and low thermal conductivity. Moreover, it was also suggested that taking Pm as a descriptor in the machine learning algorithms can significantly improve the prediction accuracy for thermal conductivity. This study offers molecular insight into the impact of various SBUs on thermal conductivity in framework-based nanomaterials, which may guide the rational design of nanoporous materials with desirable thermal conductivity.

Design of an S-scheme photo-catalyst utilizing a Cu-doped perovskite and MOF-5 for simultaneous degradation of organic pollutants under LED light irradiation: Application of EXRSM method for spectra separation and BBD-RSM modeling

Heterojunction photo-catalysts have attracted significant attention in solar energy conversion due to their ability to reduce suppressing electron-hole pairs and improve catalytic capability. Herein, we designed an S-scheme photo-catalyst by encapsulating a Cu-doped perovskite inside the pores of MOF-5 for the first time, exhibiting excellent efficiency in a pollutant degradation process. The pristine MOF cannot act in the visible light region because of its wide bandgap. However, the encapsulation modified its bandgap and but also increased its photo-catalytic activity. Simultaneous photo-degradation of two organic contaminants, methylene blue (MB) and paracetamol (PA), was investigated to evaluate the catalytic activity of this composite. As a challenge, the UV-vis spectra of PA strongly overlapped with MB in a binary mixture preventing direct measurement of its concentration without previous separation via conventional methodologies. Hence, we used a simple and fast technique called the extended ratio subtraction method (EXRSM) to separate their absorption spectra. The statistical investigations established that it could resolve the issue of signal overlapping. Also, a statistical approach, Box-Behnken (BBD-RSM), was used to model and optimize the degradation process providing a better way to explain the effect and interactions of main parameters on degradation efficiency. Now, an empirical model for each pollutant can make a relationship between them. The photo-degradation yield was obtained at 67.12% and 87.96% for PA and MB, respectively, under optimum conditions. Furthermore, the kinetics and mechanism of reaction were investigated, and the results revealed that it follows a pseudo-first-order model for each pollutant.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

In Situ Cutting of Ammonium Perchlorate Particles by Co-Bipy "scalpel" for High Efficiency Thermal Decomposition

Burning rate of solid propellants can be effectively improved by adding catalysts and using smaller size ammonium perchlorate (AP). Although few reports, the exploration of changing the size of AP primary particles by catalysts is of great significance for improving combustion performance. Here, taking Co-bipy as an example, the potential advantages of such materials as AP decomposition catalysts are reported. Due to the existence of NO3 - combined with oxygen rich environment provided by AP, the structural self-transformation from micronrods to nanoparticles can be quickly realized during the heating process. More importantly, when Co-bipy decomposes, it can play the role of "scalpel" and in situ cut AP particles. Results show that high-temperature decomposition of Co-bipy/AP occurs at 305.8 °C, which is 137.5 °C lower than that of pure AP. Catalytic mechanism is discussed by in situ IR and TG-IR, CoO can effectively increase the content of reactive oxygen species and weaken the N-H bond, realizing the rapid oxidation of NH3 . Eventually, the behavior of Co-bipy cutting AP particles is tested. This interesting catalyst structure self-transformation behavior can not only realize the influence on AP, but also perform a positive function in the combustion process of solid propellants, such as opening the adhesive AP interface.

The anticancer properties of metal-organic frameworks and their heterogeneous nanocomposites

Herein, silver-based metal-organic framework (AgMOF) and its graphene oxide (GO)-decorated nanocomposite (GO-AgMOF) are proposed for use in emerging biomedical applications. The nanocomposites are characterized, and hence, in vitro apoptotic and antibacterial features of AgMOF and GO-AgMOF nanomaterials were investigated. An MTT cytocompatibility assay indicates that these nanomaterials have dose-dependent toxicity in contact with SW480, colon adenocarcinoma cells. In addition, the cell death mechanism was explored by analyzing flow cytometry and caspase activity. Furthermore, the expressions of pro-apoptotic and anti-apoptotic genes were investigated using quantitative polymerase chain reaction (qPCR). Comparing the control group with the groups treated by the nanomaterials indicates up-regulation of the BAX/BCl2 ratio. We also measured the minimum inhibitory concentration (MIC) and minimum bacterial concentration (MBC) of these nanomaterials acting on S. mutans and S. aureus, which indicates excellent antibacterial properties. Showing inhibition effect on the viability of cancerous cells through apoptosis and antibacterial effects simultaneously, AgMOF and GO-AgMOF can be regarded as potential therapeutics for cancer.

GNP/Al-MOF nanocomposite as an efficient fiber coating of headspace solid-phase micro-extraction for the determination of organophosphorus pesticides in food samples

The synthesis and utilization of a high porous nanocomposite comprising MIL-53(Al) metal-organic framework (Al-MOF) and graphene nanopowder (GNP) is reported as a fiber coating for headspace solid-phase micro-extraction (HS-SPME) of selected organophosphorus pesticides (OPPs) from apple, potato, grape juice, tomato, and river water. The adsorbed OPPs on the coated fiber were subsequently determined using GC-MS. Several parameters affecting the efficiency of extraction including time and temperature of extraction, desorption condition of extracted analytes, pH and agitation of sample solution, and salt concentration were investigated. The optimum extraction condition was achieved at 70 °C with an extraction time of 40 min, pH = 4-8, and NaCl concentration of 6.0% (w/v). The best condition of desorption were observed at 280 °C for 2.0 min under a flow of helium gas in the GC inlet. Under optimal conditions, the detection limits ranged from 0.2 to 1.5 ng g^-1 and the linear ranges between 0.8 and 600 ng g^-1. The proposed method showed very good repeatability with RSD values ranging from 4.5 to 7.3% (n = 5). The relative recoveries were between 88% and 109% at the spiked level of 25.0 ng g^-1 for the tomato sample. The fabricated fiber exhibited good enrichment factor (62-195) at optimum condition of HS-SPME. The applied HS-SPME technique is facile, fast, and inexpensive. The thermally stable GNP/Al-MOF exhibited a high sensitivity toward OPPs. So, this nanocomposite can be considered as a sorbent for the micro-extraction of other pesticides in food.

Do Internal and External Surfaces of Metal-Organic Frameworks Have the Same Hydrophobicity? Insights from Molecular Simulations

Reliable information on the hydrophobicity of porous materials is important in the design of many catalytic and separation processes. In general, hydrophobicity is assessed by measuring the contact angle of water (external surface) or the adsorption isotherm of water (internal surface). However, it is not clear how these different assessments are related. In this paper, molecular dynamics simulations of microscopic water droplets on the external surfaces of metal-organic frameworks are used to investigate the influence of the surface nature and hydrophobicity on the contact angle. The metal-organic frameworks MOF-5 and CAU-10 were modeled with external surfaces of different hydrophobicities, while the internal surface was maintained. It was observed that microscopic droplets orientate their spreading to the nature of the external surfaces. Comparing the simulated contact angles and adsorption isotherms confirms the necessity to distinguish between internal and external hydrophobicity.

Co0·5Ni0·5FeCrO4 spinel nanoparticles decorated with UiO-66-based metal-organic frameworks grafted onto GO and O-SWCNT for gas adsorption and water purification

We report on the synthesis of unique nanocomposites based on graphene oxide (GO) and oxidized single-wall carbon nanotubes (O-SWCNTs) combined with UiO-66-NH₂ and UiO-66-COOH metal-organic frameworks (MOFs) decorated onto Co_0·5Ni₀·₅FeCrO₄ spinel magnetic nanoparticles (SMNPs). Novel SMNPs of Co_0·5Ni_0·5FeCrO_4, synthesized for the first time by the sol-gel method, exhibited exceptional thermal stability up to 985 °C. To modify the physicochemical properties of the SMNPs and MOFs, hydrophilic Zr-based MOFs were directly decorated onto the SMNP (MOF-d-SMNP) which led to improved dispersion properties and enhanced the catalytic activity of the SMNP by providing additional functional groups and active catalytic sites, along with surface area expansion. The synthesis and decoration were achieved by a hydrothermal process forming covalent bonding of MOFs onto the SMNPs, using O-SWCNTs and GO monolayers as platforms. Such an approach proved to be more effective than direct mixing of nanoparticles with the platforms, as it reduced the aggregation of nanoparticles and improved the dispersion forces of the MOF-d-SMNP. The MOF-d-SMNP/GO and MOF-d-SMNP/O-SWCNT nanocomposite properties were characterized by XRD, SEM-EDS, HRTEM, FTIR, TGA, gravimetric gas sorption and BET techniques. Performed experiments revealed exceptional adsorption capacity and catalytic activity (the reduction of the toxic pollutant 4-nitrophenol to 4-aminophenol). We demonstrated that novel nanocomposite materials MOF-d-SMNP/GO and MOF-d-SMNP/O-SWCNT showed potential for water treatment and gas sorption applications. Exhibited properties make these materials promising candidates for use in applications requiring, for example, catalytic activity at elevated temperatures.

Continuous Flow Composite Membrane Catalysts for Efficient Decomposition of Chemical Warfare Agent Simulants

Continuous and safe decomposition of chemical warfare agents (CWAs) is a critical requirement to protect both soldiers and citizens and to eliminate the stockpiles after the cold war. The Zr-based metal-organic framework (Zr-MOF) has been known as the most effective catalyst for decomposing CWAs, especially the most fatal nerve agents, however, its low processability due to the powder form limits its expansion to actual military applications. To this end, the composite membrane catalysts (CMCs) comprising the Zr-MOF (UiO-66 catalyst) and nylon 6 nanofiber (porous supporter) are developed by the simple integration of electrospray and electrospinning, resulting in selective immobilization of UiO-66 on the surface of the nylon 6 nanofibers. These strategical benefits of CMCs gave super catalytic durability including recyclability over five times without decreasing the catalytic activity for the decomposition of methyl paraoxon (MPO), a simulant of the nerve agent, in the presence of N-ethylmorpholine (N-EM), which was not achieved in the original particulate UiO-66. Because of the excellent physical and chemical stabilities of CMCs, the CMC with 56 wt % of UiO-66 (CMC56) decomposed 198 g of MPO within an hour in the continuous flow system with a flow rate of 21.6 mL h^-1. This study highlights the important strategies in designing the feasible membrane-type catalysts with superior catalytic activity and robust durability for decomposing CWAs in the continuous flow system.

Unusual Cu-Co/GO Composite with Special High Organic Content Synthesized by an in Situ Self-Assembly Approach: Pyrolysis and Catalytic Decomposition on Energetic Materials

An interesting Cu-Co/GO composite with special high organic content was accidentally fabricated for the first time via a one-pot solvothermal method in the mixed solvent of isopropanol and glycerol. The Cu-Co/GO composite was calcined separately in three different atmospheres (air, nitrogen, and argon) and further investigated by a series of characterization techniques. The results indicate that the spinel phase nano-CuCo₂O₄ composite, nanometal oxides (CuO and CoO), and nanometal mixture of Cu and Co were unexpectedly formed after calcination in air, N₂, and Ar atmospheres, respectively, and the possible reaction mechanism was discussed. The specific mass losses of the Cu-Co/GO composite calcined in air, N₂, and Ar atmospheres were 28.14 %, 21.68 %, and 23.76 %, respectively. The catalytic decomposition performances of the as-prepared samples for cyclotrimethylenetrinitramine (RDX) and the mixture of nitrocellulose (NC) and RDX (NC + RDX) were investigated and compared via DSC method, and the results demonstrate that Cu-Co/GO composites obviously decrease the thermal decomposition temperature of RDX from 242.3 to 236.5 (before calcination), 238.6 (air), 235.8 (N₂), and 228.6 °C (Ar), respectively. Cu-Co/GO(Ar) composite exhibits the best catalytic decomposition performance among all samples, which makes the decomposition temperature of RDX and NC + RDX decrease by 13.7 and 4.9 °C and the apparent activation energy of decomposition for RDX decrease by 110.1 kJ/mol. The enhanced catalytic performance of Cu-Co/GO(Ar) composite could be attributed to the smaller particle size, better crystallinity, and specific well-dispersed metal atoms, whereas the Cu-Co/GO(air) composite after air calcination presents a bad catalytic performance due to the removal of GO.