One-Step Solvothermal Synthesis of Ni Nanoparticle Catalysts Embedded in ZrO2 Porous Spheres to Suppress Carbon Deposition in Low-Temperature Dry Reforming of Methane

Contribution of micropores in porous zirconia spheres to high optical transparency of dental resin composites

Transparency to UV-Vis light and radiopacity of dental resin composites containing zirconia (ZrO2) fillers were investigated. The transparency of the resin composite containing porous ZrO2 spheres was much higher than that containing irregularly shaped ZrO2 particles. Calcination of the porous ZrO2 spheres at high temperatures led to dramatically reduced specific surface areas and pore volumes. The transparency of the resin composite containing the calcined porous ZrO2 spheres drastically decreased as the calcination temperature increased. Then, the enhanced UV-Vis transmittance of the resin composite containing porous ZrO2 spheres is attributed to the concentration and physical characteristics of the pores. The radiopacity of the resin composites containing porous ZrO2 spheres increased slightly with increasing calcination temperature. This study revealed that the internal structure of the ZrO2 fillers mainly influenced in the UV-Vis light transmittance of the resin composites.

Solvothermal synthesis of hair-like carbon nanotubes onto sub-micron-sized spherical metal oxide catalyst cores

Long- and uniform-length, and high-density hair-like carbon nanotubes (CNTs) were produced by CNT growth on sub-micron-sized spherical catalyst supports. The nanosized catalysts (FeO _x , CoO _x , and NiO _x ) that were supported in/on the sub-micron-sized spherical metal oxides (TiO₂, ZrO₂, SnO₂, and CeO₂) were prepared via one-step solvothermal and/or two-step impregnation methods. The nanosized catalysts supported in/on the spherical metal oxide supports were converted into CNT conjugates with the CNT-hair morphology via a chemical thermal vapor deposition technique using ethyne gas as a carbon source; the CNTs grew on the central spherical metal oxide core under the base growth process conditions. Among the many types of candidate spherical catalyst materials, the combination of FeO _x as a catalyst for CNT growth and ZrO₂ as a support led to the best growth of CNT-hair under the reaction conditions, which included a temperature of 730 °C, pressure of 65 Pa, a 10 sccm ethyne gas flow, and a reaction time of 10 s. The CNTs consisted of five-to-eight-layered multi-wall structures with lengths of approximately 3 μm. The CNT-hair that was obtained using the solvothermally embedded catalyst showed higher crystallinity and was dense, thick, and straight, while the corresponding CNT-hair obtained using the impregnated catalyst was slightly sparse, thin, and curly. A unique layer structure constructed using large quantities of uniform CNT-hair, including multiple CNT yarns similar to fuzzy balls or cotton candies, was assembled. The CNT-hair conjugate, specifically constructed in a layer structure with core FeO _x /ZrO₂ catalysts and tangled CNT yarns, had an appearance similar to frog eggs. Therefore, we successfully prepared suitable catalysts for CNT-hair production and fabricated a layer structure consisting of large numbers of CNT-hair conjugates. The unique structures are expected as a new metamaterial with intriguing physical properties, including isotropic absorption of polarized light and electromagnetic waves.

Influence of the nanostructural characteristics of inorganic fillers on the physical properties of resin cements

Light-curing resin cements, each comprising one of five different inorganic fillers (non-porous and porous spherical SiO₂ particles, irregularly shaped glass and ZrO₂ particles, and porous ZrO₂ spheres), monomers, and polymerization initiators were prepared to determine the effect of filler morphology on the adhesive strength of the resin cement. The strength of adhesion to a computer-aided design/computer-aided manufacturing (CAD/CAM) resin block was investigated mechanically by measuring the tensile bond strength, flexural strength, and elastic modulus. The resin cement containing sub-micron porous ZrO₂ spheres had significantly higher tensile bond strength than the other resin cements. The resin cement containing the porous ZrO₂ spheres had markedly lower flexural strength and elastic modulus values than the resin cements containing SiO₂ and glass fillers.