Test-retest reliability and measurement errors of grip strength test in patients with traumatic injuries in the upper extremity: a cross-sectional study

Enabling older adults with intellectual disability to become physical activity leaders in their community: Pilot study

People with intellectual disabilities (ID) have high levels of sedentary behaviour and co-morbid health conditions. There is also increased longevity for this group which is an incredible success story but one which also poses challenges to the health system. For the first time, the mainstream health system needs to plan for and address age related health needs of people with ID. It also demands consideration of age-appropriate health-promotion efforts to support this ageing population with life-long disability. A physical activity programme, People with Intellectual Disability as Physical Activity Leaders (PPALs), was co-designed and co-developed with older adults (40+ years) with intellectual disability (ID). The process, content and outcomes of the pilot are presented in this paper. Expertise from three sectors: non-statutory academic and people with intellectual disabilities and their supporters worked collaboratively for successful completion of the project.

Interrater Reliability and Precision of a Novel Hand Strength Assessment and Treatment Device: The GripAble

IMPORTANCE

Occupational therapy practitioners need modern tools for the assessment of maximal grip strength in clinical and remote settings.

OBJECTIVE

To establish the (1) interrater reliability and (2) precision of the GripAble among three raters with different expertise in occupational therapy when testing healthy participants, and to (3) evaluate the relative reliabilities of different approaches to estimating grip strength (i.e., one trial, mean of two trials, and the mean of three trials).

DESIGN

Measurement study.

SETTING

Minnesota Translational Musculoskeletal and Occupational Performance Research Lab, University of Minnesota, Minneapolis.

PARTICIPANTS

Thirty volunteers, age ≥18 yr, without any hand problems.

OUTCOMES AND MEASURES

Using GripAble, three occupational therapy raters with varied experience measured the maximal grip strength of the dominant and nondominant hands of all participants. Using the mean of three trials when testing grip strength with GripAble adds precision.

RESULTS

GripAble has excellent interrater reliability (i.e., intraclass correlation coefficient > .75) and acceptable precision (minimal detectable change < 15%) among healthy adults.

CONCLUSIONS AND RELEVANCE

GripAble allows occupational therapy practitioners with different experiences to assess grip strength in healthy hands quickly, precisely, and with excellent reliability. Additional research is needed on its psychometrics in clinical populations and capacities in remote monitoring and exergaming. Plain-Language Summary: The results of this study show that grip strength, an important biomarker and commonly assessed construct in occupational therapy, can be evaluated reliably, precisely, and rapidly with GripAble. The use of GripAble by occupational therapy practitioners in clinical settings may help to build an infrastructure for remote measurements and exergaming interventions in the future.

Handgrip strength and upper limb functional performance measures in people over 18 years old: Analysis of relationships and influencing factors

BACKGROUND

Handgrip strength is a common, simple, and inexpensive method to measure muscle strength. On the other hand, the functional performance measurement involves a usual task which implies repeating elements between the individuals' interaction and the environment. This is fundamental for projecting their results to daily life situation.

PURPOSE

To explore the relationship between grip strength and measures of functional performance of the upper limbs (ULs) in people over 18 years of age, and to determine the influence of sociodemographic and anthropometric variables on the relationship.

STUDY DESIGN

A cross-sectional study was conducted under the analytical empirical approach, using linear associations between handgrip strength and functional performance measurement tests (correspondence analysis).

METHODS

Three hundred sixty-two male and female individuals between 18 and 91 years of age from 4 Colombian cities participated. The grip strength of both ULs measured with a digital dynamometry was associated with the Box and Block Test (BBT, manual dexterity), Nine-Hole Peg Test (NHPT, daily living tasks), and Jebsen-Taylor Hand Function Test (JJT, ability to grasp, pick up, and place). Multiple linear regression analyzes were performed to assess possible explanatory factors of a sociodemographic and anthropometric order.

RESULTS

A significant association was found between the grip strength of dominant and non-dominant ULs with all functional performance tests (ρ > 0.27 and p < .001), except for the writing and simulated feeding subtests of the JJT (ρ ≤ 0.16). An interactive effect of age was found in the relationship between grip strength and the 3 functional performance tests.

CONCLUSIONS

These results support the association between grip strength with the NHPT, JJT, and BBT measures and the interactive effect of age on the performance of all tests.

Relationships Between Physical Fitness Assessment Measures and a Workplace Task-Specific Physical Assessment Among Police Officers: A Retrospective Cohort Study

ABSTRACT

Lockie, R, Dawes, JJ, Sakura, T, Schram, B, and Orr, RM. Relationships between physical fitness assessment measures and a workplace task-specific physical assessment among police officers: a retrospective cohort study. J Strength Cond Res 37(3): 678-683, 2023-Police officers are required to perform physically demanding occupational tasks and, as such, require an adequate level of fitness. The aim of this study was to investigate relationships between a physical fitness assessment test (PAT) and a task-specific physical competency test (PCT). Retrospective data for 307 police trainees who completed the PAT and the PCT were provided. The PAT comprised a 2.4-km run, vertical jump, push-ups, and grip strength measures. The PCT, a single timed event, consisted of 10 occupational specific tasks (e.g., trailer push, wall climb, window climb through), which were completed within a 400-m obstacle course. Pearson's correlations were used to investigate relationships between the PAT and the PCT. Linear regression analyses were conducted to determine whether PAT predicted PCT performance. All PAT measures significantly correlated with PCT performance with the strength of the correlations ranging from moderate (vertical jump; r = -0.420, p < 0.01) to strong (2.4 km run; r = 0.639, p < 0.01). The highest predictive relationship was observed with 2.4-km run ( r2 = 0.409), and the lowest predictive relationship was observed with the vertical jump ( r2 = 0.177). The results of this study highlight the importance of aerobic capacity (2.4 km run), muscular endurance (push-ups), strength (grip strength), and power (vertical jump) for successful performance during the PCT. These physical attributes should be developed in new police trainees before attending recruit training if viable and form part of any return-to-work reconditioning frameworks for both police trainees and officers.

Return-to-Work Predictions for Chinese Patients With Occupational Upper Extremity Injury: A Prospective Cohort Study

Objective

We created predictive models using machine learning algorithms for return-to-work (RTW) in patients with traumatic upper extremity injuries.

Methods

Data were obtained immediately before patient discharge and patients were followed up for 1 year. K-nearest neighbor, logistic regression, support vector machine, and decision tree algorithms were used to create our predictive models for RTW.

Results

In total, 163 patients with traumatic upper extremity injury were enrolled, and 107/163 (65.6%) had successfully returned to work at 1-year of follow-up. The decision tree model had a lower F1-score than any of the other models (t values: 7.93–8.67, p &lt; 0.001), while the others had comparable F1-scores. Furthermore, the logistic regression and support vector machine models were significantly superior to the k-nearest neighbors and decision tree models in the area under the receiver operating characteristic curve (t values: 6.64–13.71, p &lt; 0.001). Compared with the support vector machine, logistical regression selected only two essential factors, namely, the patient's expectation of RTW and carrying strength at the waist, suggesting its superior efficiency in the prediction of RTW.

Conclusion

Our study demonstrated that high predictability for RTW can be achieved through use of machine learning models, which is helpful development of individualized vocational rehabilitation strategies and relevant policymaking.

Responsiveness and Validity of Weight-Bearing Test for Measuring Loading Capacity in Patients With Triangular Fibrocartilage Complex Injury

CONTEXT

Weight-bearing test (WBT) is a noninvasive quantitative test which has been used recently to determine loading capability of the individuals. The aim of this study was to strengthen the evidence for using the WBT test for measuring weight-bearing capacity of the upper-extremity with the specific objective of examining the internal and external responsiveness and concurrent validity of the test in patients with triangular fibrocartilage complex injury.

DESIGN

Single-group repeated measures.

METHODS

Internal responsiveness was assessed using effect size statistics. The correlation coefficient was used to examine external responsiveness by testing 5 hypotheses regarding predefined correlations between the changes in the measurements. Concurrent validity was evaluated by analyzing correlations between the WBT and other measurements. Thirty-one patients with triangular fibrocartilage complex injury were included for the analysis of the concurrent validity. Eighteen patients who completed all measurements at baseline and at 3-month follow-up enrolled for the responsiveness analysis. Measurements included the WBT, pain intensity, grip strength, and upper extremity functional level.

RESULTS

The WBT test was able to detect statistically significant changes in weight-bearing capacity between baseline and follow-up (P = .0001). The effect size of the WBT was large. Three out of 5 hypotheses (60%) were confirmed, a good correlation was found between changes scores of the WBT and grip strength (r = .478; P < .05). There were significant correlations between the WBT and other measurements (r value range from -.401 to .742; P < .05). A higher correlation was found between the WBT and grip strength (r = .742; P = .0001).

CONCLUSIONS

The responsiveness and concurrent validity of the WBT test confirmed that it is able to measure change in weight-bearing capacity in patients with triangular fibrocartilage complex injury.

Reconstruction of the anatomy of the hip in total hip arthroplasty with two different kinds of stems

Background

The reconstruction of the individual anatomy is important in total hip replacement. The aim of the study was to compare two different kinds of stems with respect to the reconstruction of the individual anatomy of the hip.

Methods

We compared the restoration of the anatomical parameters (horizontal and vertical offset, femoral neck-shaft angle (NSA) and leg length) of 100 unilateral CoreHip (CH) implantations with 100 unilateral implantations of a standard anatomical stem (Exception (E)). The CoreHip has three different NSAs and exhibits a constant femoral neck length for the different sizes. The Exception stem has a standard and lateralized version with two different NSAs and, in both versions, the femoral neck length increases proportionately with size. The anatomical parameters of the operated and healthy sides were measured and the differences between the two stems compared.

Results

The horizontal (2.5 ± 2.8 mm (mean ± SD) for CH vs. 5.4 ± 4.1 mm for E, p < 0.001) and vertical offset (4.1 ± 3.5 mm for CH vs. 5.0 ± 3.8 mm, p = 0.024) and femoral neck-shaft-angle (1.7 ± 1.6 degrees for CH vs. 5.6 ± 3.4 degrees for E, p < 0.001) could be reconstructed significantly better with the CoreHip system. There was a tendency for the leg length (4.0 ± 3.9 mm for CH vs. 4.5 ± 3.8 mm; p = 0.11) to be better restored with the CoreHip.

Conclusion

The reconstruction of the individual anatomy of the hip with an endoprosthesis could be realized significantly better with the stem that was designed with three different femoral neck-shaft angles and a constant femoral neck length over different sizes.

Minimal detectable change in handgrip strength and usual and maximum gait speed scores in community-dwelling Japanese older adults requiring long-term care/support

Aging is an important issue in Japan that has led to a large number of older adults requiring long-term care/support. Therefore, we determined the range of measurement error in the measurement of handgrip strength and gait speed which are representative tests. This cross-sectional study included 111 community-dwelling Japanese older adults aged ≥65 years who required long-term care/support and underwent ambulatory rehabilitation. Handgrip strength and usual and maximum gait speed were measured on two days in one single week. Minimal detectable change (MDC) was calculated. The MDC in handgrip strength was 2.9 kg for the overall population, 3.2 kg for the male participants, and 2.4 kg for the female participants. For the overall population, the MDC in usual gait speed was 0.18 m/s and that in maximum gait speed was 0.23 m/s. These MDCs are expected to be suitable for judging clinical changes because this study considered gender and typical tests.