Cement augmentation of the proximal femoral nail antirotation for the treatment of two intertrochanteric fractures - a comparative finite element study

Risk factors for excessive lateral migration of the blade in proximal femoral nail anti-rotation in elderly patients with intertrochanteric femur fracture

OBJECTIVE

Intertrochanteric femur fractures are prevalent among the elderly, leading to substantial morbidity. Proximal femoral nail anti-rotation (PFNA) is commonly used for internal fixation, but excessive lateral migration of the PFNA blade poses a significant complication. Understanding the risk factors for this complication is crucial for optimizing patient care.

METHODS

A retrospective case-control study was conducted on elderly patients with intertrochanteric femur fractures who underwent PFNA internal fixation. Patients were categorized based on the occurrence of excessive lateral migration of the blade. The differences in general information, surgical indices, imaging measures, fracture stability indicators, VAS score, Harris score, and other factors were analyzed. Single factor correlation analysis and multivariate logistic regression were utilized to identify risk factors associated with excessive blade lateral migration.

RESULTS

Risk factors significantly associated with excessive blade lateral migration included the Singh index for osteoporosis, quality of calcar reduction, surgical indices (hospital stays, revision surgery for blade prominence), imaging measures (blade position, lateralization, and migration), fracture stability indicators (tip-apex distance, AO/OTA classification), and postoperative functional outcomes (VAS and Harris scores). Multivariate logistic regression identified these factors as independent predictors of excessive lateral migration, underlining the multifactorial nature of this complication.

CONCLUSION

This study identified several significant risk factors for excessive lateral migration of the PFNA blade, including bone quality, calcar reduction, surgical indices, imaging measures, and fracture stability indicators.

Comparison of the therapeutic efficacy of hip arthroplasty and proximal femoral nail antirotation internal fixation for unstable intertrochanteric femur fractures

OBJECTIVE

To compare the therapeutic efficacy of total hip arthroplasty (THA) versus proximal femoral nail antirotation (PFNA) internal fixation for treating unstable intertrochanteric femur fractures (UIFF).

METHODS

In this retrospective study, the clinical data of 86 patients with intertrochanteric femur fractures (IFF) treated in Hangzhou Fuyang Hospital of Orthopedics of Traditional Chinese Medicine from January 2022 to December 2023 were collected and analyzed. Patients were categorized into two groups based on their treatment modality: the THA group (n=45, treated with THA) and the PFNA group (n=41, treated with PFNA internal fixation). The two groups were compared in terms of surgery-related indicators (operative time, incision length, intraoperative blood loss, postoperative drainage volume, and intraoperative fluoroscopy frequency), postoperative recovery indicators (time to first ambulation, length of stay, time until full weight-bearing ambulation), and the incidence of postoperative complications. The pain indicators (Wong-Baker Faces Pain Rating Scale) and hip joint function indicators (Harris Hip Scores) of patients in the two groups were assessed preoperatively and at 1, 3, and 6 months postoperatively. The hip joint function recovery outcomes of the two groups of patients were recorded at the last follow-up.

RESULTS

The PFNA group had significantly shorter operative time, shorter incision length, lower intraoperative blood loss, lower postoperative drainage volume, and higher intraoperative fluoroscopy frequency compared to the THA group (all P < 0.05). The PFNA group also had significantly longer time to first ambulation, length of stay, and time until full weight-bearing ambulation (all P < 0.05). There was no statistically significant difference in the incidence of postoperative complications between the two groups (P > 0.05). Postoperative Wong-Baker scores in both groups decreased compared to preoperative levels. At 1 and 3 months postoperatively, the PFNA group had significantly higher Wong-Baker scores than the THA group (P < 0.05), but at 6 months postoperatively, the difference was not statistically significant (P > 0.05). Postoperative Harris scores increased in both groups compared to preoperative scores. At 1 month postoperatively, the PFNA group had significantly lower Harris scores than the THA group (P < 0.05); however, at 3 and 6 months postoperatively, the differences were not statistically significant (all P > 0.05). There was no significant difference in the rates of excellent recovery of hip joint function between the two groups at the last follow-up (P > 0.05).

CONCLUSION

Both THA and PFNA internal fixation yield favorable outcomes in treating IFF with no significant difference in complications. The difference lies in the shorter operative time and lesser trauma inflicted by PFNA internal fixation, despite it involving prolonged radiation exposure and bed rest. Conversely, THA requires longer operative time and causes greater trauma but results in shorter postoperative recovery periods, allowing earlier ambulation.

Feasibility biomechanical study of injectable Biphasic Calcium Phosphate bone cement augmentation of the proximal femoral nail antirotation (PFNA) for the treatment of two intertrochanteric fractures using cadaveric femur

This study evaluated the feasibility of the femoral bone after fixation using biphasic calcium phosphate cement-augmentation of the proximal femoral nail antirotation (PFNA) compared with PFNA without cement. This study presented to compare the stiffness, fatigue testing, and compressive strength between stable (AO31-A2.1) and unstable (AO31-A3.3) intertrochanteric fractures treated by cement augmented PFNA of the cadaveric femoral. Biphasic calcium phosphate cement was injected to align and compatible with PFNA and the reconstructive procedure was monitored the cement placement using x-ray imaging during operation. The testing demonstrated that the cement could be injected through a small needle (13 G, 16 cm length, 1.8 mm inner diameter) within a suitable operating time. The feasibility study of the biomechanical testing was divided into three tests: stiffness test, fatigue cyclic load, and compression test. The results showed that the cement-augmented specimens exhibited higher stiffness than the control specimens without cement. The cement-augmented specimens also showed lower strain energy during the fatigue test, resulting in higher compressive strength (4730.7 N) compared to the control specimens (3857.4 N). There is a correlation between BMD and fracture load and the increase in compression load of the cement-augmented femoral compared to the controls as well as an increase in strain energy of fatigue cyclic testing was found. Biphasic calcium phosphate cement-augmented of the PFNA biomechanically enhanced the cut-out resistance in intertrochanteric fracture. This procedure is especially efficient for unstable intertrochanteric fracture suggesting the potential benefits of using biphasic calcium phosphate cement in medical applications.

Finite element study on the micromechanics of cement-augmented proximal femoral nail anti-rotation (PFNA) for intertrochanteric fracture treatment

Blade cut-out is a common complication when using proximal femoral nail anti-rotation (PFNA) for the treatment of intertrochanteric fractures. Although cement augmentation has been introduced to overcome the cut-out effect, the micromechanics of this approach remain to be clarified. While previous studies have developed finite element (FE) models based on lab-prepared or cadaveric samples to study the cement-trabeculae interface, their demanding nature and inherent disadvantages limit their application. The aim of this study was to develop a novel 'one-step forming' method for creating a cement-trabeculae interface FE model to investigate its micromechanics in relation to PFNA with cement augmentation. A human femoral head was scanned using micro-computed tomography, and four volume of interest (VOI) trabeculae were segmented. The VOI trabeculae were enclosed within a box to represent the encapsulated region of bone cement using ANSYS software. Tetrahedral meshing was performed with Hypermesh software based on Boolean operation. Finally, four cement-trabeculae interface FE models comprising four interdigitated depths and five FE models comprising different volume fraction were established after element removal. The effects of friction contact, frictionless contact, and bond contact properties between the bone and cement were identified. The maximum micromotion and stress in the interdigitated and loading bones were quantified and compared between the pre- and post-augmentation situations. The differences in micromotion and stress with the three contact methods were minimal. Micromotion and stress decreased as the interdigitation depth increased. Stress in the proximal interdigitated bone showed a correlation with the bone volume fraction (R2 = 0.70); both micromotion (R2 = 0.61) and stress (R2 = 0.93) at the most proximal loading region exhibited a similar correlation tendency. When comparing the post- and pre-augmentation situations, micromotion reduction in the interdigitated bone was more effective than stress reduction, particularly near the cement border. The cementation resulted in a significant reduction in micromotion within the loading bone, while the decrease in stress was minimal. Noticeable gradients of displacement and stress reduction can be observed in models with lower bone volume fraction (BV/TV). In summary, cement augmentation is more effective at reducing micromotion rather than stress. Furthermore, the reinforcing impact of bone cement is particularly prominent in cases with a low BV/TV. The utilization of bone cement may contribute to the stabilization of trabecular bone and PFNA primarily by constraining micromotion and partially shielding stress.

Comparison of the clinical outcomes between proximal femoral nail anti-rotation with cement enhancement and hemiarthroplasty among elderly osteoporotic patients with intertrochanteric fracture

BACKGROUND

The proximal femoral nail anti-rotation (PFNA) with cement enhancement enhances the anchorage ability of internal fixation in elderly with osteoporotic intertrochanteric fracture. However, whether it is superior to hemiarthroplasty is still controversial. The present study aimed to determine which treatment has better clinical outcomes among older patients.

METHODS

We retrospectively analyzed 102 elderly patients with osteoporosis who developed intertrochanteric fractures and underwent PFNA combined with cement-enhanced internal fixation (n = 52, CE group), and hemiarthroplasty (n = 50, HA group) from September 2012 to October 2018. All the intertrochanteric fractures were classified according to the AO/OTA classification. Additionally, the operative time, intraoperative blood loss, intraoperative and postoperative blood transfusion rates, postoperative weight-bearing time, hospitalization time, Barthel Index of Activities Daily Living, Harris score of hip function, visual analog (VAS) pain score, and postoperative complications were compared between the two groups.

RESULTS

The CE group had significantly shorter operative time, lesser intraoperative blood loss, lower blood transfusion rate, and longer postoperative weight-bearing time than the HA group. The CE group had lower Barthel's Index of Activities of Daily Living, lower Harris' score, and higher VAS scores in the first and third months after surgery than the HA group, but no difference was observed between the two groups from 6 months to 12 months. There was no significant difference in the total post-operative complications between the two groups.

CONCLUSION

The use of PFNA combined with a cement-enhanced internal fixation technique led to shorter operative time and lesser intraoperative blood loss and trauma in elderly patients as compared to HA.

Sagittal support rather than medial cortical support matters in geriatric intertrochanteric fracture: A finite element analysis study

Hip fracture, increasing exponentially with age, is osteoporosis's most severe clinical consequence. Intertrochanteric fracture, one of the main types of hip fracture, is associated with higher mortality and morbidity. The current research hotspots lay in improving the treatment effect and optimizing the secondary stability after intertrochanteric fracture surgery. Cortex buttress reduction is a widely accepted method for treating intertrochanteric fracture by allowing the head-neck fragment to slide and rigidly contact the femoral shaft's cortex. Medial cortical support is considered a more effective option in treating young patients. However, osteo-degenerations features, including bone weakness and cortical thickness thinning, affect the performance of cortex support in geriatric intertrochanteric fracture treatment. Literature focusing on the age-specific difference in cortex performance in the fractured hip is scarce. We hypothesized that this osteo-19 degenerative feature affects the performance of cortex support in treating intertrochanteric fractures between the young and the elderly. We established twenty models for the old and the young with intertrochanteric fractures and performed static and dynamic simulations under one-legged stance and walking cycle conditions. The von Mises stress and displacement on the femur, proximal femoral nail anti-rotation (PFNA) implant, fracture plane, and the cutting volume of cancellous bone of the femur were compared. It was observed that defects in the anterior and posterior cortical bone walls significantly increase the stress on the PFNA implant, the displacement of the fracture surface, and cause a greater volume of cancellous bone to be resected. We concluded that ensuring the integrity and alignment of the anterior and posterior cortical bones is essential for elderly patients, and sagittal support is recommended. This finding suggests that the treatment method for intertrochanteric fracture may differ, considering the patient's age difference.

The significance of reduction of valgus-intercalated femoral neck fracture with valgus angle > 15°and the selection of internal fixation by finite element analysis

BACKGROUND

Currently, consensus is lacking on the necessity of internal fixation after reducing valgus-intercalated femoral neck fractures with abduction > 15°. This study employs finite element analysis to compare the biomechanical differences between the femoral neck dynamic cross nail system (FNS) and inverted cannulated screw (ICS), aiming to provide a foundation for clinical procedures.

METHODS

Human femur CT scan data were processed using MimICS21.0 and Geomagic 2021 software, imported into Solidworks2021 to create fracture models, based on Garden I abduction and Valgus-intercalated femoral neck fractures. The internal fixation model was divided into two groups: A-Anatomic reduction group; B-Valgus-intercalated femoral neck fracture group. ANSYS software facilitated meshing, material assignment, and data calculation for stress and displacement comparisons when ICS and FNS were applied in reduction or non-reduction scenarios.

RESULTS

Without internal fixation, peak femur stress in both groups was 142.93 MPa and 183.62 MPa. Post FNS fixation, peak stress was 254.11 MPa and 424.81 MPa; peak stresses for the two FNS models were 141.26 MPa and 248.33 MPa. Maximum displacements for the two FNS groups were 1.91 mm and 1.26 mm, with peak fracture-end stress at 50.751 MPa and 124.47 MPa. After ICS fixation, femur peak stress was 204.76 MPa and 274.08 MPa; maximum displacements were 1.53 mm and 1.15 mm. ICS peak stress was 123.88 MPa and 174.61 MPa; maximum displacements were 1.17 mm and 1.09 mm, with peak fracture-end stress at 61.732 MPa and 104.02 MPa, respectively.

CONCLUSIONS

Our finite element study indicates superior mechanical stability with internal fixation after reducing valgus-intercalated femoral neck fractures (> 15°) compared to in situ fixation. Additionally, ICS biomechanical properties are more suitable for this fracture type than FNS.

Mechanical Gains Associated With Virtual Prophylactic Intramedullary Nail Fixation in Femurs With Metastatic Disease

Background

Many patients with metastatic bone disease (MBD) of the femur undergo prophylactic surgical fixation for impending pathologic fractures; intramedullary nailing (IMN) being the most common fixation type. However, surgeons often question if IMN fixation provides sufficient improvements in mechanical strength for particular metastatic lesions. Our goal was to use patient-specific finite element (FE) modeling to computationally evaluate the effects of simulated IMN fixation on the mechanics of femurs affected with MBD.

Methods

Computed tomography (CT) scans were available retrospectively from 48 patients (54 femurs) with proximal femoral metastases. The CT scans were used to create patient-specific, non-linear, voxel-based FE models of the femur, simulating the instant of peak hip joint contact force during normal walking. FE analyses were repeated after incorporating virtual IMN fixation (Smith and Nephew, TRIGEN INTERTAN) into the same femurs. Femur strength and load-to-strength ratio (LSR; lower LSR indicates lower fracture risk) were compared between untreated and IMN conditions using statistical analyses.

Results

IMN fixation resulted in a very modest average 10% increase in mechanical strength (p<0.001), which was associated with a slight 7% reduction in fracture risk (p<0.001). However, there was considerable variation in fracture risk reduction between individual femurs (0.13-50%). In femurs with the largest reduction in fracture risk (>10%), IMN hardware directly passed through a considerable section of that femur's metastatic lesion. Femurs with lytic (10%) and diffuse (9%) metastases tended to have greater reductions in fracture risk compared to femurs with blastic (5%) and mixed (4%) metastases (p=0.073).

Conclusion

Given the mechanically strong baseline condition of most femurs in this cohort, evident by the low fracture risk at the time of CT scanning, the relative increase in stiffness with the addition of the IMN hardware may not make a substantial contribution to overall mechanical strength. The mechanical gains of IMN fixation in femurs with MBD appear most beneficial when the hardware traverses an adequate section of the lesion. Level of Evidence: III.

A novel intramedullary nail design of intertrochanteric fracture fixation improved by proximal femoral nail antirotation

A proper and reliable fracture fixation is important for fracture healing. The proximal femoral intramedullary nail (IN), such as proximal femoral nail anti-rotation (PFNA) or Gamma nail, is widely used for intertrochanteric fracture fixation. However, it still suffers considerable stress concentrations, especially at the junction between the nail and the blade or lag screw. In this study, we propose a novel intramedullary nail design to enhance the intramedullary nail integrity by introducing a bolt screw to form a stable triangular structure composed of the nail, the lag screw, and the bolt screw (PFTN, Proximal femoral triangle nail). Systematic finite element numerical simulations were carried out to compare the biomechanical performances of PFTN and PFNA under both static and dynamic loads during the postures of ascending and descending stairs. The simulation results highlight the advantages of the proposed PFTN design with lower stresses, less stress concentration, and higher structure stability.

Reconstruction of massive bone defects after femoral tumor resection using two new-designed 3D-printed intercalary prostheses: a clinical analytic study with the cooperative utilization of multiple technologies

BACKGROUND

To reconstruct massive bone defects of the femoral diaphysis and proximal end with limited bilateral cortical bone after joint-preserving musculoskeletal tumor resections, two novel 3D-printed customized intercalary femoral prostheses were applied.

METHODS

A series of nine patients with malignancies who received these novel 3D-printed prostheses were retrospectively studied between July 2018 and November 2021. The proximal and diaphyseal femur was divided into three regions of interest (ROIs) according to anatomic landmarks, and anatomic measurements were conducted on 50 computed tomography images showing normal femurs. Based on the individual implant-involved ROIs, osteotomy level, and anatomical and biomechanical features, two alternative 3D-printed prostheses were designed. In each patient, Hounsfield Unit (HU) value thresholding and finite element analysis were conducted to identify the bone trabecula and calcar femorale and to determine the stress distribution, respectively. We described the characteristics of each prosthesis and surgical procedure and recorded the intraoperative data. All patients underwent regular postoperative follow-up, in which the clinical, functional and radiographical outcomes were evaluated.

RESULTS

With the ROI division and radiographic measurements, insufficient bilateral cortical bones for anchoring the traditional stem were verified in the normal proximal femur. Therefore, two 3D-printed intercalary endoprostheses, a Type A prosthesis with a proximal curved stem and a Type B prosthesis with a proximal anchorage-slot and corresponding locking screws, were designed. Based on HU value thresholding and finite element analysis, the 3D-printed proximal stems in all prostheses maximally preserved the trabecular bone and calcar femorale and optimized the biomechanical distribution, as did the proximal screws. With the 3D-printed osteotomy guide plates and reaming guide plates, all patients underwent the operation uneventfully with a satisfactory duration (325.00 ± 62.60 min) and bleeding volume (922.22 ± 222.36 ml). In the follow-up, Harris Hip and Musculoskeletal Tumor Society scores were ameliorated after surgery (P < 0.001 and P < 0.001, respectively), reliable bone ingrowth was observed, and no major complications occurred.

CONCLUSIONS

Two novel 3D-printed femoral intercalary prostheses, which achieved acceptable overall postoperative outcomes, were used as appropriate alternatives for oncologic patients with massive bone defects and limited residual bone and increased the opportunities for joint-preserving tumor resection. Several scientific methodologies utilized in this study may promote the clinical design proposals of 3D-printed implants.

Cost-Effectiveness of Cement Augmentation Versus No Augmentation for the Fixation of Unstable Trochanteric Fractures

BACKGROUND

A previous randomized controlled trial (RCT) demonstrated a trend toward a reduced risk of implant-related revision surgery following fixation with use of a Proximal Femoral Nail Antirotation (PFNA) with TRAUMACEM V+ Injectable Bone Cement augmentation versus no augmentation in patients with unstable trochanteric fractures. To determine whether this reduced risk may result in long-term cost savings, the present study assessed the cost-effectiveness of TRAUMACEM V+ cement augmentation versus no augmentation for the fixation of unstable trochanteric fractures from the German health-care payer's perspective.

METHODS

The cost-effectiveness model comprised 2 stages: a decision tree simulating clinical events, costs, and utilities during the first year after the index procedure and a Markov model extrapolating clinical events, costs, and utilities over the patient's lifetime. Sources of model parameters included the previous RCT, current literature, and administrative claims data. Outcome measures were incremental costs (in 2020 Euros), incremental quality-adjusted life-years (QALYs), and incremental cost-effectiveness ratios (ICERs). Model uncertainty was assessed with deterministic and probabilistic sensitivity analyses.

RESULTS

The base-case analysis showed that fixation with cement augmentation was the dominant strategy as it was associated with cost savings (€50.3/patient) and QALY gains (0.01 QALY/patient). Major influential parameters for the ICER were the utility of revision, rates of revision surgery within the first year after fixation surgery, and the costs of augmentation and revision surgery. Probabilistic sensitivity analyses demonstrated that estimates of cost savings were more robust than those of increased QALYs (66.4% versus 52.7% of the simulations). For a range of willingness-to-pay thresholds from €0 to €50,000, the probability of fixation with cement augmentation being cost-effective versus no augmentation remained above 50%.

CONCLUSIONS

Fixation with use of cement augmentation dominated fixation with no augmentation for unstable trochanteric fractures, resulting in cost savings and QALY gains. Given the input parameter uncertainties, future analyses are warranted when long-term costs and effectiveness data for cement augmentation are available.

LEVEL OF EVIDENCE

Economic and Decision Analysis Level II . See Instructions for Authors for a complete description of levels of evidence.

Comparison of Curative Effect between PFNA and PCCP in the Treatment of Femoral Intertrochanteric Fractures

Objective

To compare and analyze the clinical efficacy of proximal femoral nail anti-rotation (PFNA) and percutaneous compression plate (PCCP) for minimally invasive treatment of femoral intertrochanteric fractures.

Methods

A retrospective analysis of 98 patients with femoral intertrochanteric fractures admitted to our hospital from January 2019 to December 2020 was used as the research object, and they were divided into PFNA group and PCCP group according to different treatment methods, with 51 cases and 47 cases. The intraoperative and postoperative indicators were compared between the two groups of patients.

Results

There was no significant difference in the operative time, postoperative fracture healing time, and Harris score of hip joint function between the two groups (t = -1.43, 1.86, 1.63; P > 0.05). Compared with the PFNA group, the intraoperative blood loss and postoperative drainage volume in the PCCP group were lower than those in the PFNA group (t = 11.38, 9.66; P < 0.05). Compared with the PFNA group, the time of weight-bearing in the PCCP group was longer than that in the PFNA group (t = -2.23, P < 0.05). The total incidence of postoperative complications was 7.84% in the PFNA group and 10.64% in the PCCP group, and there was no significant difference between the two groups (P > 0.05).

Conclusion

The PFNA and PCCP are both effective measures for the clinical treatment of intertrochanteric fractures, and internal fixation should be reasonably selected according to the specific conditions of the patients.

Two Cannulated Screws Provide Sufficient Biomechanical Strength for Prophylactic Fixation in Adult Patients With an Aggressive Benign Femoral Neck Lesion

Background: Two cannulated screws were proposed for prophylactic fixation in adult patients with an aggressive benign femoral neck lesion in recent literature. However, the biomechanical properties of this intervention have not yet been investigated.

Methods: After the evaluation of the heterogeneity of bone mineral density and geometry via quantitative computed tomography, 24 embalmed adult human cadaver femurs were randomized into the control, inferior half of the anterior cortical (25%) bone defect, entire anterior cortical (50%) bone defect, and the 50% bone defect and two cannulated screw group. Biomechanical analysis was conducted to compare the stiffness and failure load among the four groups when mimicking a one-legged stance. A CT-based finite element analysis (FEA) was performed to mimic the cortical and cancellous bone defect and the implantation of two cannulated screws of the four groups. Measurements of the maximal displacement and von Mises stress were conducted with the longitudinal load force and boundary conditions being established for a one-leg-standing status.

Results: We noted a significant improvement in the failure load after the insertion of two 6.5 mm cannulated screws in femurs with 50% bone defect (+95%, p = 0.048), and no significant difference was found between the screw group and the intact femur. Similar trends were also found in the measurements of stiffness (+23%, p &gt; 0.05) via biomechanical testing and the von Mises stresses (−71%, p = 0.043) by FEA when comparing the screw group and the 50% bone defect group.

Conclusion: Our findings suggest that two cannulated screws provided sufficient biomechanical strength for prophylactic fixation in adult patients with an aggressive benign femoral neck lesion even when the entire anterior cortical bone is involved.

In Silico Finite Element Modeling of Stress Distribution in Osteosynthesis after Pertrochanteric Fractures

A stabilization method of pertrochanteric femur fractures is a contentious issue. Here, we assess the feasibility of rapid in silico 2D finite element modeling (FEM) to predict the distribution of stresses arising during the two most often used stabilization methods: gamma nail fixation (GNF) and dynamic hip screw (DHS). The modeling was based on standard pre-surgery radiographs of hip joints of 15 patients with pertrochanteric fractures of type A1, A2, and A3 according to the AO/OTA classification. The FEM showed that the stresses were similar for both GNF and DHS, with the medians ranging between 53-60 MPa and consistently lower for A1 than A3 fractures. Stresses also appeared in the fixation materials being about two-fold higher for GNF. Given similar bone stresses caused by both GNF and DHS but shorter surgery time, less extensive dissection, and faster patient mobilization, we submit that the GNF stabilization appears to be the most optimal system for pertrochanteric fractures. In silico FEM appears a viable perioperative method that helps predict the distribution of compressive stresses after osteosynthesis of pertrochanteric fractures. The promptness of modeling fits well into the rigid time framework of hip fracture surgery and may help optimize the fixation procedure for the best outcome. The study extends the use of FEM in complex orthopedic management. However, further datasets are required to firmly position the FEM in the treatment of pertrochanteric fractures.