Heterogeneous oxygen availability affects the titer and topology but not the fidelity of plasmid DNA produced by Escherichia coli

Plasmid-Borne Biosynthetic Gene Clusters within a Permanently Stratified Marine Water Column

Plasmids are mobile genetic elements known to carry secondary metabolic genes that affect the fitness and survival of microbes in the environment. Well-studied cases of plasmid-encoded secondary metabolic genes in marine habitats include toxin/antitoxin and antibiotic biosynthesis/resistance genes. Here, we examine metagenome-assembled genomes (MAGs) from the permanently-stratified water column of the Cariaco Basin for integrated plasmids that encode biosynthetic gene clusters of secondary metabolites (smBGCs). We identify 16 plasmid-borne smBGCs in MAGs associated primarily with Planctomycetota and Pseudomonadota that encode terpene-synthesizing genes, and genes for production of ribosomal and non-ribosomal peptides. These identified genes encode for secondary metabolites that are mainly antimicrobial agents, and hence, their uptake via plasmids may increase the competitive advantage of those host taxa that acquire them. The ecological and evolutionary significance of smBGCs carried by prokaryotes in oxygen-depleted water columns is yet to be fully elucidated.

Comprehensive analysis of metabolic sensitivity of 1,4-butanediol producing Escherichia coli toward substrate and oxygen availability

Nowadays, chemical production of 1,4-butanediol is supplemented by biotechnological processes using a genetically modified Escherichia coli strain, which is an industrial showcase of successful application of metabolic engineering. However, large scale bioprocess performance can be affected by presence of physical and chemical gradients in bioreactors which are a consequence of imperfect mixing and limited oxygen transfer. Hence, upscaling comes along with local and time dependent fluctuations of cultivation conditions. This study emphasizes on scale-up related effects of microbial 1,4-butanediol production by comprehensive bioprocess characterization in lab scale. Due to metabolic network constraints 1,4-butanediol formation takes place under oxygen limited microaerobic conditions, which can be hardly realized in large scale bioreactor. The purpose of this study was to assess the extent to which substrate and oxygen availability influence the productivity. It was found, that the substrate specific product yield and the production rate are higher under substrate excess than under substrate limitation. Furthermore, the level of oxygen supply within microaerobic conditions revealed strong effects on product and by-product formation. Under strong oxygen deprivation nearly 30% of the consumed carbon is converted into 1,4-butanediol, whereas an increase in oxygen supply results in 1,4-butanediol reduction of 77%. Strikingly, increasing oxygen availability leads to strong increase of main by-product acetate as well as doubled carbon dioxide formation. The study provides clear evidence that scale-up of microaerobic bioprocesses constitute a substantial challenge. Although oxygen is strictly required for product formation, the data give clear evidence that terms of anaerobic and especially aerobic conditions strongly interfere with 1,4-butanediol production.

Combined dissolved oxygen tension and online viscosity measurements in shake flask cultivations via infrared fluorescent oxygen-sensitive nanoparticles

Oxygen supply is one of the most critical process parameters in aerobic cultivations. To assure sufficient oxygen supply, shake flasks are usually used in combination with orbital shaking machines. In this study, a measurement technique for the dissolved oxygen tension (DOT) in shake flask cultures with viscosity changes is presented. The movement of the shaker table is monitored by means of a Hall effect sensor. For DOT measurements, infrared fluorescent oxygen-sensitive nanoparticles are added to the culture broth. The position of the rotating bulk liquid needs to be determined to assure measurements inside the liquid. The leading edge of the bulk liquid is detected based on the fluorescence signal intensity of the oxygen-sensitive nanoparticles. Furthermore, online information about the viscosity of the culture broth is acquired due to the detection of the position of the leading edge of the bulk liquid relative to the direction of the centrifugal force, as described by Sieben et al. (2019. Sci. Rep., 9, 8335). The DOT measurement is combined with a respiration activity monitoring system which allows for the determination of the oxygen transfer rate (OTR) in eight parallel shake flasks. Based on DOT and OTR, the volumetric oxygen transfer coefficient (k_L a) is calculated during cultivation. The new system was successfully applied in cultivations of Escherichia coli, Bacillus licheniformis, and Xanthomonas campestris.

Design of a microaerobically inducible replicon for high-yield plasmid DNA production

A pUC-derived replicon inducible by oxygen limitation was designed and tested in fed-batch cultures of Escherichia coli. It included the addition of a second inducible copy of rnaII, the positive replication control element. The rnaII gene was expressed from P_trc and cloned into pUC18 to test the hypothesis that the ratio of the positive control molecule RNAII to the negative control element, RNAI, was the determinant of plasmid copy number per chromosome (PCN). The construct was evaluated in several E. coli strains. Evaluations of the RNAII/RNAI ratio, PCN and plasmid yield normalized to biomass (Y_pDNA/X ) were performed and the initial hypothesis was probed. Furthermore, in high cell-density cultures in shake flasks, an outstanding amount of 126 mg/L of plasmid was produced. The microaerobically inducible plasmid was obtained by cloning the rnaII gene under the control of the oxygen-responsive Vitreoscilla stercoraria hemoglobin promoter. For this plasmid, but not for pUC18, the RNAII/RNAI ratio, PCN and Y_pDNA/X efficiently increased after the shift to the microaerobic regime in fed-batch cultures in a 1 L bioreactor. The Y_pDNA/X of the inducible plasmid reached 12 mg/g at the end of the fed-batch but the original pUC18 only reached ca. 6 mg/g. The proposed plasmid is a valuable alternative for the operation and scale-up of plasmid DNA production processes in which mass transfer limitations will not represent an issue.

Physiological and transcriptional comparison of acetate catabolism between Acinetobacter schindleri ACE and Escherichia coli JM101

Acinetobacter bacteria preferentially use gluconeogenic substrates instead of hexoses or pentoses. Accordingly, Acinetobacter schindleri ACE reaches a high growth rate on acetate but is unable to grow on glucose, xylose or arabinose. In this work, we compared the physiology of A. schindleri ACE and Escherichia coli JM101 growing on acetate as the carbon source. In contrast to JM101, ACE grew on acetate threefold faster, had a twofold higher biomass yield, and a 45% higher specific acetate consumption rate. Transcriptional analysis revealed that genes like ackA, pta, aceA, glcB, fumA, tktA and talA were overexpressed while acsA, sfcA, ppc and rpiA were underexpressed in ACE relative to JM101. This transcriptional profile together with carbon flux balance analysis indicated that ACE forms acetyl-CoA preferentially by the AckA-Pta (acetate kinase-phosphotransacetylase) pathway instead of Acs (acetyl-CoA synthetase) and that the glyoxylate shunt and tricarboxylic acid cycle are more active in ACE than in JM101. Moreover, in ACE, ribose 5-phosphate and erythrose 4-phosphate are formed from trioses, and NADPH is mainly produced by isocitrate dehydrogenase. This knowledge will contribute to an understanding of the carbon metabolism of Acinetobacter species of medical, biotechnological and microbiological relevance.

Engineering E. coli for improved microaerobic pDNA production

Escherichia coli strains W3110 and BL21 were engineered for the production of plasmid DNA (pDNA) under aerobic and transitions to microaerobic conditions. The gene coding for recombinase A (recA) was deleted in both strains. In addition, the Vitreoscilla hemoglobin (VHb) gene (vgb) was chromosomally inserted and constitutively expressed in each E. coli recA mutant and wild type. The recA inactivation increased the supercoiled pDNA fraction (SCF) in both strains, while VHb expression improved the pDNA production in W3110, but not in BL21. Therefore, a codon-optimized version of vgb was inserted in strain BL21recA^-, which, together with W3110recA^-vgb⁺, was tested in cultures with shifts from aerobic to oxygen-limited regimes. VHb expression lowered the accumulation of fermentative by-products in both strains. VHb-expressing cells displayed higher oxidative activity as indicated by the Redox Sensor Green fluorescence, which was more intense in BL21 than in W3110. Furthermore, VHb expression did not change pDNA production in W3110, but decreased it in BL21. These results are useful for understanding the physiological effects of VHb expression in two industrially relevant E. coli strains, and for the selection of a host for pDNA production.

Design of a synthetic miniR1 plasmid and its production by engineered Escherichia coli

A synthetic plasmid consisting of the minimal elements for replication control of the R1 replicon and kanamycin resistance marker, which was named pminiR1, was developed. pminiR1 production was tested at 30 °C under aerobic and microaerobic conditions in Escherichia coli W3110 recA^- (W1). The plasmid DNA yields from biomass (Y_pDNA/X) were only 0.06 ± 0.02 and 0.22 ± 0.11 mg/g under aerobic and microaerobic conditions, respectively. As an option to increase Y_pDNA/X values, pminiR1 was introduced in an engineered E. coli strain expressing the Vitreoscilla hemoglobin inserted in chromosome (W12). The Y_pDNA/X values using strain W12 increased to 0.85 ± 0.05 and 1.53 ± 0.14 mg/g under aerobic and microaerobic conditions, respectively. pminiR1 production in both strains was compared with that of pUC57Kan at 37 °C under aerobic and microaerobic conditions. The Y_pDNA/X values for pminiR1 using strain W12 were 6.25 ± 0.16 and 9.27 ± 0.95 mg/g under aerobic and microaerobic conditions, respectively. Such yields were similar to those obtained for plasmid pUC57Kan using strain W12 (6.9 ± 0.64 and 10.85 ± 1.06 mg/g for aerobic and microaerobic cultures, respectively). Therefore, the synthetic minimal plasmid based on the R1 replicon is a valuable alternative to pUC plasmids for biotechnological applications.