Influence of cavity depth and restoration of non-carious cervical root lesions on strain distribution from various loading sites

Effects of different treatment modalities on biomechanical behavior of maxillary incisors with external invasive cervical resorption at different progression levels

BACKGROUND/AIM

This study aimed to evaluate the biomechanical behavior of maxillary incisors with external invasive cervical resorption (EICR) at different progression levels after receiving different modes of treatment under occlusal forces using finite element analysis (FEA).

MATERIALS AND METHODS

Three-dimensional (3D) models of intact maxillary central incisors were constructed and modified to include EICR cavities with different progression levels in the buccal cervical areas. The EICR cavities confined to dentin were repaired using Biodentine™ (Septodont Ltd., Saint Maur des Fausse ́s, France), resin composite, or glass ionomer cement (GIC) . Additionally, EICR cavities with pulp invasion requiring direct pulp capping were simulated as repaired using Biodentine only or 1 mm thick Biodentine and either resin composite or GIC for the rest of the cavity. Moreover, models with root canal treatment and EICR defects repaired using Biodentine, resin composites, or GIC were also generated. A force of 240 N was applied to the incisal edge. The principal stresses in the dentin were evaluated.

RESULTS

GIC showed more favorable results than the other materials in EICR cavities confined to the dentin. However, Biodentine alone resulted in more favorable minimum principal stresses (Pmin ) compared to other materials in EICR cavities with close pulp proximity. Exceptionally, the models localized in the coronal third of the root with a circumferential extension of the cavity >90° showed more favorable results for GIC. The presence of root canal treatment had no significant effect on stress values.

CONCLUSIONS

Based on this FEA study the use of GIC in EICR lesions confined to the dentin is recommended. However, Biodentine may be a better option for restoring EICR lesions close to the pulp with or without root canal treatment. Except when the circumferential extension of the cavity is >90°, the use of GIC may be more advantageous.

Investigating the etiology of non-carious cervical lesions: Novel µCT analysis

OBJECTIVES

The etiology of non-carious cervical lesions (NCCLs) is not fully understood, limiting treatment and prevention. Our aim was to evaluate the effect of mechanical loading and acid exposure on the cervical tooth region using a random spectrum loading model that simulates the nature of oral mastication.

METHODS

Thirty extracted human premolars were divided into three experimental groups: 1) unloaded teeth immersed in acid (erosion group: Er), 2) loaded teeth immersed in acid (erosion with spectrum loading group: Er-SL), and 3) loaded teeth immersed in distilled water (spectrum loading group: SL). Random spectrum loading with loads ranging from 100 to 500 N was performed. All teeth were scanned using micro-CT. A novel 3D analysis was developed to evaluate the circumferential cervical tissue loss and regions under tension and compression. For parametric and non-parametric comparisons, one-way ANOVA with Tukey post-hoc tests and Kruskal-Wallis with Bonferroni post-hoc tests were used.

RESULTS

A significant difference was observed in the circumferential volumetric loss, with the Er-SL exhibiting the greatest volume loss (p < 0.001). Moreover, in the loaded groups (Er-SL and SL), regions subjected to tension showed significantly greater loss (p < 0.001, p = 0.007) compared with regions subjected to compression.

CONCLUSIONS

The novel high-resolution micro-CT analysis provided new insights into the etiology of NCCLs. The results suggested that the cumulative effect of mechanical loading and acid exposure may play a major role in NCCL formation.

CLINICAL SIGNIFICANCE

This study investigates the etiology of NCCLs by examining the combined effects of occlusal loads and acid exposure on cervical tissue loss. Understanding the pathogenesis of NCCLs paves the way for the development of improved preventative measures and treatment strategies to prevent tooth structure degradation.

Morphological and Optical Coherence Tomography Aspects of Non-Carious Cervical Lesions

Non-carious cervical lesions (NCCLs) are considered the irreversible losses of dental hard tissues at the cemento-enamel junction, in the absence of acute trauma and dental caries. The aim of this study was to highlight the presence of NCCLs in cervical areas based on specific macroscopic aspects in order to establish their clinical form, size and location and to confirm the role of optical coherence tomography (OCT) examination in the early diagnosis of these lesions. For this study, 52 extracted teeth were used, which did not have endodontic treatments, fillings or carious lesions in the cervical area. All teeth were examined macroscopically and OCT was used to evaluate the degree of occlusal wear, the presence and clinical form of NCCLs. Most NCCLs were identified on the buccal surfaces of the premolars. The most frequently encountered clinical form was the wedge-shaped form, with a radicular location. NCCLs present most frequently in the wedge-shaped form. Teeth that presented several NCCLs were identified. The OCT examination is an adjunct method to evaluate the clinical forms of NCCL.

Noncarious cervical lesions: Morphology and progression, prevalence, etiology, pathophysiology, and clinical guidelines for restoration

PURPOSE

To synthesize the literature regarding noncarious cervical lesions (NCCLs) and propose clinical guidelines when lesion restoration is indicated.

MATERIAL AND METHODS

A PubMed search was performed related to NCCL morphology, progression, prevalence, etiology, pathophysiology, and restoration.

RESULTS

NCCLs form as either rounded (saucerlike) depressions with smooth, featureless surfaces that progress mainly in height or as V-shaped indentations that increase in both height and depth. Prevalence ranges from less than 10% to over 90% and increases with age. Common locations are the facial surfaces of maxillary premolars. They have a multifactorial etiology due to personal habits such as excessive horizontal toothbrushing and consumption of acidic foods and drinks. Occlusal factors have been identified as contributing to the prevalence of NCCLs in some studies, whereas other studies indicate there is no relationship. The concept of abfraction has been proposed whereby mechanical stress from occlusal loading plays a role in the development and progression of NCCLs with publications supporting the concept and others indicating it lacks the required clinical documentation. Regardless of the development mechanism, demineralization occurs and they are one of the most common demineralization diseases in the body. Treatment should be managed conservatively through preventive intervention with restorative treatment delayed until it becomes necessary due to factors such as lesion progression, impact on patient's quality of life, sensitivity, poor esthetics, and food collection may necessitate restoration. Composite resins are commonly used to restore NCCLs although other materials such as glass ionomer and resin-modified glass ionomer are also used. Sclerotic dentin does not etch like normal dentin and therefore it has been recommended to texture the dentin surface with a fine rotary diamond instrument to improve restoration retention. Some clinicians use mechanical retention to increase retention. Beveling of enamel is used to increase the bonding area and retention as well as enhance the esthetic result by gradually creating a color change between the restoration and tooth. Both multistep and single-step adhesives have been used. Dentin etching should be increased to 30 seconds due to the sclerotic dentin with the adhesive agent applied using a light scrubbing motion for 20 seconds but without excessive force that induces substantial bending of a disposable applicator. Both flowable and sculptable composite resins have been successfully used with some clinicians applying and polymerizing a layer of flowable composite resin and then adding an external layer of sculptable composite resin to provide enhanced resistance to wear. When caries is present, silver diamine fluoride has been used to arrest the caries rather than restore the lesion.

CONCLUSIONS

Noncarious cervical lesions (NCCLs) form as smooth saucerlike depressions or as V-shaped notches. Prevalence values as high as 90% and as low as 10% have been reported due to habits such as excessive toothbrushing and an acidic diet. Occlusal factors have been proposed as contributing to their presence but it remains controversial. Publications have both supported and challenged the concept of abfraction. They are one of the most common demineralization diseases in the body. Conservative treatment through prevention is recommended with restorative treatment delayed as long as possible. When treatment is needed, composite resins are commonly used with proposed restorative guidelines including texturing the sclerotic dentin, beveling the enamel, potential use of mechanical retention, 30 seconds of acid etching, and use of either multistep or single-step adhesives in conjunction with a light scrubbing motion for 20 seconds without excessive force placed on disposable applicators.

Numerical Modeling of a New Type of Prosthetic Restoration for Non-Carious Cervical Lesions

The paper considers a new technology for the treatment of non-carious cervical lesions (NCCLs). The three parameterized numerical models of teeth are constructed: without defect, with a V-shaped defect, and after treatment. A new treatment for NCCL has been proposed. Tooth tissues near the NCCLs are subject to degradation. The main idea of the technology is to increase the cavity for the restoration of NCCLs with removal of the affected tissues. The new treatment method also allows the creation of a playground for attaching the gingival margin. The impact of three biomaterials as restorations is studied: CEREC Blocs; Herculite XRV; and Charisma. The models are deformed by a vertical load from the antagonist tooth from 100 to 1000 N. The tooth-inlay system is considered, taking into account the contact interaction. Qualitative patterns of tooth deformation before and after restoration were established for three variants of the inlay material.

Two-year randomized clinical trial of different restorative techniques in non-carious cervical lesions and MMP activity in gingival crevicular fluid

OBJECTIVES

To evaluate different restorative techniques for non-carious cervical lesions (NCCLs) and the activity of matrix metalloproteinases (MMPs) in gingival crevicular fluid.

MATERIALS AND METHODS

Two hundred restorations were performed in 50 patients using resin composite restorative system without (I) and with selective enamel conditioning (II) and resin-modified glass-ionomer cement without (III) and with EDTA pretreatment (IV). Gingival crevicular fluid samples were collected in 15 patients. Restorations were evaluated using USPHS criteria at baseline and after 2 years. Percentages of MMP activity were assessed by zymography as a surrogate outcome. Equality tests of two proportions, logistic regression analysis, survival analysis, ANOVA repeated measures, and Fisher tests were used.

RESULTS

No differences in clinical performance were found among groups. Group I had lower retention at 2 years than at baseline. Decreased alpha scores for marginal integrity and marginal discoloration were observed for all groups after 2 years. MMP-2 decreased after 1 year, and its activity increased back to the initial level after 2 years, mainly for groups I, II, and III. MMP-9 increased after 1 year, and it was reduced to the initial level after 2 years, mainly for group I.

CONCLUSIONS

All restorative techniques performed similarly in NCCLs after 2 years with initial marginal defect alterations. MMP-2 reestablished its initial levels after 2 years, and MMP-9 had few alterations over time in crevicular fluid. Clinical relevance The different restorative techniques are equally successful in NCCLs after 2 years of clinical functioning and have similar effects on MMPs present in crevicular fluid.

Influence of Diode Laser for the Treatment of Dentin Hypersensitivity on Microleakage of Cervical Restorations

Noncarious cervical lesions (NCCLs) are a common clinical finding often linked with dentin hypersensitivity (DH). Aim. The aim of the study was to evaluate the influence of diode laser for the treatment of DH on microleakage of subsequent NCCL restorations. Materials and Methods. Forty-eight extracted human premolars were collected. All teeth received standardized cervical preparation on both the buccal and palatal surfaces and were randomly divided into three groups (n = 16) according to the restorative material used: nanohybrid composite resin (CR), resin-modified glass ionomer (RMGI), and conventional glass ionomer (GIC). The prepared cavities on the palatal surfaces were treated by diode laser using SIROlaser Blue (Sirona Dental Systems, Bensheim, Germany) prior to restoration, while preparations on the buccal surfaces were directly restored. After thermocycling, the teeth were immersed in methylene blue dye for microleakage evaluation under 40x magnification at both occlusal and cervical margins. The Kruskal-Wallis test followed by the Bonferroni tests was conducted to determine inter- and intragroup differences (P < 0.05). Results. All restorative materials tested showed some degree of microleakage with no statistically significantly different scores with or without the use of laser desensitization prior to restorative treatment. Group CR showed the least microleakage, followed by group RMGI, while group GIC showed the highest. Cervical margins showed greater microleakage than the occlusal margins where the difference was statistically significant in the RMGI group without laser pretreatment (P = 0.006) and in both groups CR (P = 0.02) and RMGI (P = 0.006) with the laser pretreatment. Conclusion. Application of diode laser for the treatment of DH prior to the restoration of teeth with NCCL did not affect the microleakage of all the restorative materials tested. All the materials showed some degree of microleakage, which was higher in gingival margins compared to occlusal margins. The resin composite shows the least microleakage among all the tested materials.