Real-time fluorescence loop-mediated isothermal amplification assay for direct detection of egg drop syndrome virus

Development of a unique sandwich enzyme-linked immunosorbent assay based on monoclonal antibodies for the specific detection of the egg drop syndrome virus

RESEARCH HIGHLIGHTS

A sandwich ELISA was developed to detect EDSV using the mAbs 5G4 and HRP-6G6.The sandwich ELISA maintained high specificity and sensitivity.The sandwich ELISA had equivalent consistency with real-time PCR assay.

Development of loop-mediated isothermal amplification for detection of Mycoplasma ovipneumoniae in goats, Capra hircus

Mycoplasma ovipneumoniae is an important pathogen that causes respiratory disease in goats and sheep, leading to significant economic losses in the livestock industry. A quick and robust diagnostic test will aid in early diagnosis and treatment of the disease. Loop-mediated isothermal amplification (LAMP) offers several advantages over traditional PCR, including faster amplification, simpler operation, and lower equipment requirements, making it a promising tool for use in basic livestock units where resources and infrastructure may be limited. The present study reports on developing a LAMP assay to rapidly detect M. ovipneumoniae in goats (Capra hircus) targeting the 16S rRNA gene. LAMP was optimized to perform at 60 °C for 75 min. The result was visualized by a change in colour from deep pink to orange and further confirmed by gel electrophoresis, which gave a typical ladder-like pattern. The detection limit of the assay was as low as 0.04 ng/μl, indicating the high sensitivity of the assay. The test failed to amplify DNA isolated from healthy goat blood, Mycoplasma arginini DNA, and Staphylococcus aureus DNA. The sensitivity, specificity, and accuracy of the assay were 97.73% and 94.83%, and 96.08%, respectively. The study concludes that the developed loop-mediated isothermal amplification assay is a practical and reliable tool for field-level diagnosis of M. ovipneumoniae infections in goats, with high sensitivity and specificity under resource-limited conditions.

Standardization of loop-mediated isothermal amplification for detection of D. nodosus and F. necrophorum causing footrot in sheep and goats

The loop-mediated isothermal amplification (LAMP) was standardized for rapid detection of Dichelobacter nodosus and Fusobacterium necrophorum. A total of 250 foot swabs were screened from sheep (200) and goats (50) from different districts of Rayalaseema, viz., Chittoor, Nellore, Kadapa, and Anantapur. Out of 250 samples 75 (30.0%) and 85 (34.0%) were positive for D. nodosus and F. necrophorum, respectively. All the 250 samples were screened individually for both the organisms by LAMP. Among them, 104 (41.6%) were found to be positive for D. nodosus and 120 (48.0%) were positive for F. necrophorum. The efficacy of LAMP in terms of sample DNA detection limit was compared with the PCR by using standard dilutions of DNA extracted from D. nodosus and F. necrophorum cultures. The detection limit was found to be higher than PCR for both the organisms. The sensitivity of LAMP is compared with PCR by targeting 16S rRNA gene of D. nodosus and lktA gene of F. necrophorum. In case of D. nodosus, out of 250 samples, 75 (30.0%) were positive by PCR and 104 (41.6%) were positive by LAMP. Among 250 samples, 85 (34.0%) were positive by PCR and 120 (48.0%) were positive by LAMP in case of F. necrophorum. The LAMP was found to be more sensitive than PCR in detecting the organisms with high statistical significance.

LAMP Diagnostics at the Point-of-Care: Emerging Trends and Perspectives for the Developer Community

Introduction: Over the past decade, loop-mediated isothermal amplification (LAMP) technology has played an important role in molecular diagnostics. Amongst numerous nucleic acid amplification assays, LAMP stands out in terms of sample-to-answer time, sensitivity, specificity, cost, robustness, and accessibility, making it ideal for field-deployable diagnostics in resource-limited regions.Areas covered: In this review, we outline the front-end LAMP design practices for point-of-care (POC) applications, including sample handling and various signal readout methodologies. Next, we explore existing LAMP technologies that have been validated with clinical samples in the field. We summarize recent work that utilizes reverse transcription (RT) LAMP to rapidly detect SARS-CoV-2 as an alternative to standard PCR protocols. Finally, we describe challenges in translating LAMP from the benchtop to the field and opportunities for future LAMP assay development and performance reporting.Expert opinion: Despite the popularity of LAMP in the academic research community and a recent surge in interest in LAMP due to the COVID-19 pandemic, there are numerous areas for improvement in the fundamental understanding of LAMP, which are needed to elevate the field of LAMP assay development and characterization.

Detecting the Coronavirus (COVID-19)

The COVID-19 pandemic has created huge damage to society and brought panic around the world. Such panic can be ascribed to the seemingly deceptive features of COVID-19: Compared to other deadly viral outbreaks, it has medium transmission and mortality rates. As a result, the severity of the causative coronavirus, SARS-CoV-2, was deeply underestimated by society at the beginning of the COVID-19 outbreak. Based on this, in this review, we define the viruses with features similar to those of SARS-CoV-2 as the Panic Zone viruses. To contain those viruses, accurate and fast diagnosis followed by effective isolation and treatment of patients are pivotal at the early stage of virus breakouts. This is especially true when there is no cure or vaccine available for a transmissible disease, which is the case for the current COVID-19 pandemic. As of July 2020, more than 100 kits for COVID-19 diagnosis on the market have been surveyed in this review, while emerging sensing techniques for SARS-CoV-2 are also discussed. It is of critical importance to rationally use these kits for efficient management and control of the Panic Zone viruses. Therefore, we discuss guidelines to select diagnostic kits at different outbreak stages of the Panic Zone viruses, SARS-CoV-2 in particular. While it is of utmost importance to use nucleic acid based detection kits with low false negativity (high sensitivity) at the early stage of an outbreak, the low false positivity (high specificity) gains importance at later stages of the outbreak. When society is set to reopen from the lockdown stage of the COVID-19 pandemic, it becomes critical to have immunoassay based kits with high specificity to identify people who can safely return to society after their recovery from SARS-CoV-2 infections. Finally, since a massive attack from a viral pandemic requires a massive defense from the whole society, we urge both government and the private sector to research and develop affordable and reliable point-of-care testing (POCT) kits, which can be used massively by the general public (and therefore called massive POCT) to contain Panic Zone viruses in the future.

Loop-mediated isothermal amplification-lateral-flow dipstick (LAMP-LFD) to detect Mycoplasma ovipneumoniae

In order to establish a rapid detection method for Mycoplasma ovipneumoniae, this study used the loop-mediated isothermal amplification (LAMP) technique to carry out nucleic acid amplification and chromatographic visualization via a lateral flow dipstick (LFD) assay. The M. ovipneumoniae elongation factor TU gene (EF-TU) was detected using a set of specific primers designed for the EF-TU gene, and the EF-TU FIP was detected by biotin labeling, which was used in the LAMP amplification reaction. The digoxin-labeled probe specifically hybridized with LAMP products, which were visually detected by LFD. Here, we established the M. ovipneumoniae LAMP-LFD rapid detection method and tested the specificity, sensitivity, and clinical application of this method. Results showed that the optimized LAMP performed at 60 °C for 60 min, and LFD can specifically and visually detect M. ovipneumoniae with a minimum detectable concentration at 1.0 × 10² CFU/mL. The sensitivity of LAMP-LFD was 1000 times that of the conventional PCR detection methods, and the clinical lung tissue detection rate was 86% of 50 suspected sheep infected with M. ovipneumoniae. In conclusion, LAMP-LFD was established in this study to detect M. ovipneumoniae, a method that was highly specific, sensitive, and easy to operate, and provides a new method for the prevention and diagnosis of M. ovipneumoniae infection.