Reversible bacterial immobilization based on the salt-dependent adhesion of the bacterionanofiber protein AtaA

Size-dependent ability of AtaA to immobilize cells in Acinetobacter sp. Tol 5

Microbial cells serve as efficient and environmentally friendly biocatalysts, but their stability and reusability in practical applications must often be improved through immobilization. Acinetobacter sp. Tol 5 shows high adhesiveness to materials due to its large cell surface protein AtaA, which consists of 3630 amino acids (aa). Previously, we developed a method for immobilizing bacteria using AtaA. Herein, we investigated the cell immobilization ability of in-frame deletion (IFD) mutants of AtaA with different sizes in Tol 5. Mini-AtaA, which consists of 775 aa and is functional in Escherichia coli, was produced and present on the cell surface; however, mini-AtaA showed no immobilization ability in Tol 5. A cell immobilization assay was performed with cells expressing 16 IFD mutants of AtaA with different sizes, revealing that a length of at least 1417 aa was required for the sufficient immobilization of Tol 5 cells; thus, the minimum length needed to achieve the adhesive function of AtaA varies among bacterial species. The constructed mutant library of AtaA ranging from 3630 to 775 aa will allow researchers to quickly and easily explore the optimal size of AtaA, even for bacteria newly introduced to AtaA.

The elimination of two restriction enzyme genes allows for electroporation-based transformation and CRISPR-Cas9-based base editing in the non-competent Gram-negative bacterium Acinetobacter sp. Tol 5

Environmental isolates are promising candidates for new chassis of synthetic biology because of their inherent capabilities, which include efficiently converting a wide range of substrates into valuable products and resilience to environmental stresses; however, many remain genetically intractable and unamenable to established genetic tools tailored for model bacteria. Acinetobacter sp. Tol 5, an environmentally isolated Gram-negative bacterium, possesses intriguing properties for use in synthetic biology applications. Despite the previous development of genetic tools for the engineering of strain Tol 5, its genetic manipulation has been hindered by low transformation efficiency via electroporation, rendering the process laborious and time-consuming. This study demonstrated the genetic refinement of the Tol 5 strain, achieving efficient transformation via electroporation. We deleted two genes encoding type I and type III restriction enzymes. The resulting mutant strain not only exhibited marked efficiency of electrotransformation but also proved receptive to both in vitro and in vivo DNA assembly technologies, thereby facilitating the construction of recombinant DNA without reliance on intermediate Escherichia coli constructs. In addition, we successfully adapted a CRISPR-Cas9-based base-editing platform developed for other Acinetobacter species. Our findings provide genetic modification strategies that allow for the domestication of environmentally isolated bacteria, streamlining their utilization in synthetic biology applications.IMPORTANCERecent synthetic biology has sought diverse bacterial chassis from environmental sources to circumvent the limitations of laboratory Escherichia coli strains for industrial and environmental applications. One of the critical barriers in cell engineering of bacterial chassis is their inherent resistance to recombinant DNA, propagated either in vitro or within E. coli cells. Environmental bacteria have evolved defense mechanisms against foreign DNA as a response to the constant threat of phage infection. The ubiquity of phages in natural settings accounts for the genetic intractability of environmental isolates. The significance of our research is in demonstrating genetic modification strategies for the cell engineering of such genetically intractable bacteria. This research marks a pivotal step in the domestication of environmentally isolated bacteria, promising candidates for emerging synthetic biology chassis. Our work thus significantly contributes to advancing their applications across industrial, environmental, and biomedical fields.

Influence of Surface Roughness, Nanostructure, and Wetting on Bacterial Adhesion

Bacterial fouling is a persistent problem causing the deterioration and failure of functional surfaces for industrial equipment/components; numerous human, animal, and plant infections/diseases; and energy waste due to the inefficiencies at internal and external geometries of transport systems. This work gains new insights into the effect of surface roughness on bacterial fouling by systematically studying bacterial adhesion on model hydrophobic (methyl-terminated) surfaces with roughness scales spanning from ∼2 nm to ∼390 nm. Additionally, a surface energy integration framework is developed to elucidate the role of surface roughness on the energetics of bacteria and substrate interactions. For a given bacteria type and surface chemistry; the extent of bacterial fouling was found to demonstrate up to a 75-fold variation with surface roughness. For the cases showing hydrophobic wetting behavior, both increased effective surface area with increasing roughness and decreased activation energy with increased surface roughness was concluded to enhance the extent of bacterial adhesion. For the cases of superhydrophobic surfaces, the combination of factors including (i) the surpassing of Laplace pressure force of interstitial air over bacterial adhesive force, (ii) the reduced effective substrate area for bacteria wall due to air gaps to have direct/solid contact, and (iii) the reduction of attractive van der Waals force that holds adhering bacteria on the substrate were summarized to weaken the bacterial adhesion. Overall, this study is significant in the context of designing antifouling coatings and systems as well as explaining variations in bacterial contamination and biofilm formation processes on functional surfaces.

Growth phase-dependent production of the adhesive nanofiber protein AtaA in Acinetobacter sp. Tol 5

AtaA, the sticky, long, and peritrichate nanofiber protein from Acinetobacter sp. Tol 5, mediates autoagglutination and is highly adhesive to various material surfaces, resulting in a biofilm. Although the production of the adhesive nanofiber protein is likely to require a large amount of energy and material sources, the relationship between AtaA fiber production and cell growth remains unknown. Here, we report the growth phase-dependent AtaA fiber production in Tol 5. We examined the ataA gene expression in different growth phases using a reporter gene assay with an originally developed reporter plasmid and using reverse transcription-quantitative polymerase chain reaction. Bacterial cells with surface-displayed AtaA at different growth phases were immunostained and analyzed using fluorescence flow cytometry and confocal laser scanning microscopy. The results indicate that Tol 5 modulated the amount of surface-displayed AtaA at the transcriptional level. AtaA production was low in the early growth phase but remarkably increased in the late growth phase, covering the whole bacterial cell with AtaA fibers in the stationary phase. Tol 5 displayed AtaA fibers poorly in the early growth phase and showed less autoagglutination and adhesiveness than those in the stationary phase. Although Tol 5 grew as fast as its ataA-deficient mutant in the early growth phase, the optical density of Tol 5 culture was slightly lower than that of the ataA-deficient mutant in the late growth phase. Based on these experimental results, we propose the growth-phase-dependent production of AtaA fiber for efficient and fast cell growth.

Identification of the adhesive domain of AtaA from Acinetobacter sp. Tol 5 and its application in immobilizing Escherichia coli

Cell immobilization is an important technique for efficiently utilizing whole-cell biocatalysts. We previously invented a method for bacterial cell immobilization using AtaA, a trimeric autotransporter adhesin from the highly sticky bacterium Acinetobacter sp. Tol 5. However, except for Acinetobacter species, only one bacterium has been successfully immobilized using AtaA. This is probably because the heterologous expression of large AtaA (1 MDa), that is a homotrimer of polypeptide chains composed of 3,630 amino acids, is difficult. In this study, we identified the adhesive domain of AtaA and constructed a miniaturized AtaA (mini-AtaA) to improve the heterologous expression of ataA. In-frame deletion mutants were used to perform functional mapping, revealing that the N-terminal head domain is essential for the adhesive feature of AtaA. The mini-AtaA, which contains a homotrimer of polypeptide chains from 775 amino acids and lacks the unnecessary part for its adhesion, was properly expressed in E. coli, and a larger amount of molecules was displayed on the cell surface than that of full-length AtaA (FL-AtaA). The immobilization ratio of E. coli cells expressing mini-AtaA on a polyurethane foam support was significantly higher compared to the cells with or without FL-AtaA expression, respectively. The expression of mini-AtaA in E. coli had little effect on the cell growth and the activity of another enzyme reflecting the production level, and the immobilized E. coli cells could be used for repetitive enzymatic reactions as a whole-cell catalyst.

Recent advances in research on biointerfaces: From cell surfaces to artificial interfaces

Biointerfaces are regions where biomolecules, cells, and organic materials are exposed to environmental media or come in contact with other biomaterials, cells, and inorganic/organic materials. In this review article, six research topics on biointerfaces are described to show examples of state-of-art research approaches. First, biointerface design of nanoparticles for molecular detection is described. Functionalized gold nanoparticles can be used for sensitive detection of various target molecules, including chemical compounds and biomolecules, such as DNA, proteins, cells, and viruses. Second, the interaction between bacterial cell surfaces and material surfaces, including the introduction of advances in analytical methods and theoretical calculations, are explained as well as their applications to bioprocesses. Third, bioconjugation technologies for localizing functional proteins at biointerfaces are introduced, in particular, by focusing the potential of enzymes as a catalytic tool for designing different types of bioconjugates that function at biointerfaces. Forth topics is focusing on lipid-protein interaction in cell membranes as natural biointerfaces. Examples of membrane lipid engineering are introduced, and it is mentioned how their compositional profiles affect membrane protein functions. Fifth topic is the physical method for molecular delivery across the biointerface being developed currently, such as highly efficient nanoinjection, electroporation, and nanoneedle devices, in which the key is how to perforate the cell membrane. Final topic is the chemical design of lipid- or polymer-based RNA delivery carriers and their behavior on the cell interface, which are currently attracting attention as RNA vaccine technologies targeting COVID-19. Finally, future directions of biointerface studies are presented.

Single-cell adhesion force mapping of a highly sticky bacterium in liquid

The sticky bacterium Acinetobacter sp. Tol 5 adheres to various material surfaces via its cell surface nanofiber protein, AtaA. This adhesiveness has only been evaluated based on the amount of cells adhering to a surface. In this study, the adhesion force mapping of a single Tol 5 cell in liquid using the quantitative imaging mode of atomic force microscopy (AFM) revealed that the adhesion of Tol 5 was near 2 nN, which was 1-2 orders of magnitude higher than that of other adhesive bacteria. The adhesion force of a cell became stronger with the increase in AtaA molecules present on the cell surface. Many fibers of peritrichate AtaA molecules simultaneously interact with a surface, strongly attaching the cell to the surface. The adhesion force of a Tol 5 cell was drastically reduced in the presence of 1% casamino acids but not in deionized water (DW), although both liquids decrease the adhesiveness of Tol 5 cells, suggesting that DW and casamino acids inhibit the cell approaching step and the subsequent direct interaction step of AtaA with surfaces, respectively. Heterologous production of AtaA provided non-adhesive Acinetobacter baylyi ADP1 cells with a strong adhesion force to AFM tip surfaces of silicon and gold.

Insight into synergies between Acinetobacter sp. AL-6 and pomelo peel biochar in a hybrid process for highly efficient manganese removal

The manganese contamination of groundwater is a global issue that needs to be solved urgently. In this study, a hybrid process between pomelo peel biochar(BC) and Acinetobacter sp. AL-6 (strain AL-6) was established to remove manganese from water. The results showed that microbe-biochar composite had removed 98.19% of manganese (800 mg L^-1) within 48 h. Compared with two separate systems (biochar, strain AL-6), the co-system (strain AL-6 and BC composite) had an excellent synergy effect on manganese removal. The average removal rate of manganese in the synergistic system was 14.08 mg L^-1 h^-1, which was 6.41 times higher than strain AL-6, 3.45 times higher than biochar, and even at 2.24 times their sum. In addition, the scanning electron microscope (SEM) and the bioassay indicated that many strains were attached to biochar and had vigorous biological activity. The FTIR results showed that the functional groups of OH, CO, CO, CH₂, and CH played a vital role in removing manganese. And the correlation analysis shows that biochar with strains AL-6 has a highly synergistic effect on manganese removal. Meanwhile, the composite material can maintain excellent manganese removal efficiency under different pH conditions. Besides, in the sequence batch reactor (SBR) inoculating with the microbe-biochar composite, more than 96% of manganese was removed, which far exceeded the treatment efficiency of free bacteria in the SBR. Hence, biochar-immobilized AL-6 has great potential and can be applied to degrade manganese polluted wastewater.

Complete Genome Sequence of the Highly Adhesive Bacterium Acinetobacter sp. Strain Tol 5

Acinetobacter sp. strain Tol 5 is a nonpathogenic Gram-negative bacterium with biotechnological and environmental applications. Here, we report the complete genome sequence of Acinetobacter sp. strain Tol 5, which has a genome size of 4,799,506 bp and a G+C content of 38.1%.

Development of a Biocontained Toluene-Degrading Bacterium for Environmental Protection

Biocontainment is a safeguard strategy for preventing uncontrolled proliferation of genetically engineered microorganisms (GEMs) in the environment. Biocontained GEMs are designed to survive only in the presence of a specific molecule. The design of a pollutant-degrading and pollutant-dependent GEM prevents its proliferation after cleaning the environment. In this study, we present a biocontained toluene-degrading bacterium based on Acinetobacter sp. Tol 5. The bamA gene, which encodes an essential outer membrane protein, was deleted from the chromosome of Tol 5 but complemented with a plasmid carrying a bamA gene regulated by the Pu promoter and the regulatory protein XylR. The resultant strain (PuBamA) degraded toluene, similarly to the wild-type Tol 5. Although the cell growth of the PuBamA strain was remarkably inhibited after toluene depletion, escape mutants emerged at a frequency of 1 per 5.3 × 10⁻⁷ cells. Analyses of escape mutants revealed that insertion sequences (ISs) carrying promoters were inserted between the Pu promoter and the bamA gene on the complemented plasmid. MinION deep sequencing of the plasmids extracted from the escape mutants enabled the identification of three types of ISs involved in the emergence of escape mutants, suggesting a strategy for reducing it.

IMPORTANCE GEMs are beneficial for various applications, including environmental protection. However, the risks of GEM release into the environment have been debated for a long time. If a pollutant is employed as a specific molecule for a biocontainment system, GEMs capable of degrading pollutants are available for environmental protection. Nevertheless, to our knowledge, biocontained degraders for real pollutants have not been reported in academic journals so far. This is possibly due to the difficulty in the expression of enzymes for degrading pollutants in a tractable bacterium such as Escherichia coli. On the other hand, bacteria with enzymes for degrading pollutants are often intractable as a host of GEMs due to the shortage of tools for genetic manipulation. This study reports the feasibility of a biocontainment strategy for a toluene degrader. Our results provide useful insights into the construction of a GEM biocontainment system for environmental protection.

Process Description of an Unconventional Biofilm Formation by Bacterial Cells Autoagglutinating through Sticky, Long, and Peritrichate Nanofibers

In this study, we elucidated the formation process of an unconventional biofilm formed by a bacterium autoagglutinating through sticky, long, and peritrichate nanofibers. Understanding the mechanisms of biofilm formation is essential to control microbial behavior and improve environmental biotechnologies. Acinetobacter sp. Tol 5 autoagglutinate through the interaction of the long, peritrichate nanofiber protein AtaA, a trimeric autotransporter adhesin. Using AtaA, without cell growth or extracellular polymeric substances production, Tol 5 cells quickly form an unconventional biofilm. The process forming this unconventional biofilm started with cell-cell interactions, proceeded to cell clumping, and led to the formation of large cell aggregates. The cell-cell interaction was described by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory based on a new concept, which considers two independent interactions between two cell bodies and between two AtaA fiber tips forming a discontinuous surface. If cell bodies cannot collide owing to an energy barrier at low ionic strengths but approach within the interactive distance of AtaA fibers, cells can agglutinate through their contact. Cell clumping proceeds following the cluster-cluster aggregation model, and an unconventional biofilm containing void spaces and a fractal nature develops. Understanding its formation process would extend the utilization of various types of biofilms, enhancing environmental biotechnologies.

Bottom-up Creation of an Artificial Cell Covered with the Adhesive Bacterionanofiber Protein AtaA

The bacterial cell surface structure has important roles for various cellular functions. However, research on reconstituting bacterial cell surface structures is limited. This study aimed to bottom-up create a cell-sized liposome covered with AtaA, the adhesive bacterionanofiber protein localized on the cell surface of Acinetobacter sp. Tol 5, without the use of the protein secretion and assembly machineries. Liposomes containing a benzylguanine derivative-modified phospholipid were decorated with a truncated AtaA protein fused to a SNAP-tag expressed in a soluble fraction in Escherichia coli. The obtained liposome showed a similar surface structure and function to that of native Tol 5 cells and adhered to both hydrophobic and hydrophilic solid surfaces. Furthermore, this artificial cell was able to drive an enzymatic reaction in the adhesive state. The developed artificial cellular system will allow for analysis of not only AtaA, but also other cell surface proteins under a cell-mimicking environment. In addition, AtaA-decorated artificial cells may inspire the development of biotechnological applications that require immobilization of cells onto a variety of solid surfaces, in particular, in environments where the use of genetically modified organisms is prohibited.

Native display of a huge homotrimeric protein fiber on the cell surface after precise domain deletion

AtaA, a trimeric autotransporter adhesin from Acinetobacter sp. Tol 5, exhibits nonspecific, high adhesiveness to abiotic surfaces. For identification of the functional domains of AtaA, precise design of domain-deletion mutants is necessary so as not to cause undesirable structural distortion. Here, we designed and constructed three types of AtaA mutants from which the same domain, FGG1, was deleted. The first mutant was designed to preserve the periodicity of hydrophobic residues in the coiled-coil segments sandwiching the deleted region. After the deletion, the protein was properly displayed on the cell surface and had the same adhesive function as the wild type. Transmission electron microscopy (TEM) imaging and circular dichroism (CD) spectroscopy showed that its isolated passenger domain had the same fiber structure as in the AtaA wild type. In contrast, a mutant designed to disturb the coiled-coil periodicity at the deletion site failed to reach the cell surface. Although secretion occurred for the mutant designed with a flexible connector between the coiled coils, the cells exhibited a decrease in adhesiveness. Furthermore, TEM imaging of the mutant fibers showed bending at the fiber tip and changes in their CD spectrum indicated a decrease in secondary structure content. Thus, we succeeded to natively display the huge homotrimeric fiber structure of AtaA on the cell surface after precise deletion of a domain, maintaining the proper folding state and adhesive function by preserving its coiled-coil periodicity. This strategy enables us to construct various domain-deletion mutants of AtaA without structural distortion for complete functional mapping.

Control of AtaA-mediated bacterial immobilization by casein hydrolysates

Acinetobacter sp. Tol 5 exhibits an autoagglutinating nature and high adhesiveness to various abiotic surfaces through its bacterionanofiber protein AtaA. We have developed new bacterial immobilization methods utilizing the high adhesiveness of AtaA. We previously reported that salt is essential for the adhesiveness of AtaA. In the current study, we unexpectedly found that Tol 5 cells were not immobilized onto polyurethane foam support during growth in LB medium although AtaA was properly expressed and displayed onto the cell surface. The adhesion of Tol 5 resting cells was not affected by sugars but drastically inhibited by yeast extract and casein hydrolysates such as tryptone and casamino acids technical grade (CA-T). Some amino acids, which are major components of CA-T, partially inhibited the adhesion of Tol 5 cells. Experimental results suggested that oligopeptides might effectively inhibit the cell adhesion. Immobilized cells onto the support through AtaA were detached in CA-T solution. Also, the detached cells could be re-immobilized onto the support without impairing of their adhesiveness by replacing CA-T solution to a basal salt medium. Microscopic observation revealed that breaking of AtaA-mediated cell-cell interaction is important for the detachment of Tol 5 cells from the support. CA-T also inhibited AtaA-mediated autoagglutination and dispersed cell clumps through AtaA. This is the first report on adhesion inhibitors against AtaA and suggests that casein hydrolysates like CA-T would be a powerful tool for controlling AtaA-mediated bacterial immobilization.

Highly synergistic effects on ammonium removal by the co-system of Pseudomonas stutzeri XL-2 and modified walnut shell biochar

Pseudomonas stutzeri strain XL-2 presented efficient ammonium removal due to heterotrophic nitrification-aerobic denitrification. The modified walnut shell biochar also showed ammonium adsorption due to chemical interaction. The complex of modified biochar and strain XL-2 exhibited excellent synergistic effects on ammonium removal, especially in unfavorable environment. The maximum average ammonium removal rate of the complex was 4.40 mg·L^-1·h^-1, which was 3.01 times higher than that of pure bacteria and 5.57 times higher than that of biochar. A large number of irregular pores and hydrophilic functional groups promoted the immobilization of strain XL-2 on biochar. Adsorption of ammonium, high specific surface area and release of Mg²⁺ by biochar enhanced biodegradation of strain XL-2. Approximately 96.34%-98.73% of ammonium was removed in a sequencing batch reactor (SBR) inoculating with the complex of strain XL-2 and biochar, which was much higher than the treatment efficiency of free bacteria in SBR.

Cell behavior of the highly sticky bacterium Acinetobacter sp. Tol 5 during adhesion in laminar flows

It is important to characterize how medically, industrially, or environmentally important bacteria adhere to surfaces in liquid flows in order to control their cell adhesion and subsequent biofilm formation. Acinetobacter sp. Tol 5 is a remarkably sticky bacterium that autoagglutinates through the adhesive nanofiber protein AtaA, which is applicable to cell immobilization in bioprocesses. In this study, the adhesion and behavior of Tol 5 cells in laminar flows were investigated using flow cell systems. Tol 5 cells autoagglutinated through AtaA and formed cell clumps during flowing. The cell clumps rather than single cells went downward due to gravity and adhered to the bottom surface. Under appropriate shear stress, a twin vortex was caused by a separated flow generated at the rear of the pre-immobilized cell clumps and carried the small cell clumps to this location, resulting in their stacking there. The rearward immobilized cell clumps developed into a large, stable aggregate with a streamlined shape, independent of cell growth. Cell clumps hardly ever developed under weak shear stress that could not generate a twin vortex and were broken up under excessively strong shear stress. These cell behaviors including the importance of clumping are interesting features in the bacterial adhesion processes.

Immobilization of Enterobacter aerogenes by a Trimeric Autotransporter Adhesin, AtaA, and Its Application to Biohydrogen Production

Biological hydrogen production by microbial cells has been extensively researched as an energy-efficient and environmentally-friendly process. In this study, we propose a fast, easy method for immobilizing Enterobacter aerogenes by expressing ataA, which encodes the adhesive protein of Acinetobacter sp. Tol 5. AtaA protein on the E. aerogenes cells carrying the ataA gene was demonstrated by immunoblotting and flow cytometry. The AtaA-producing cells exhibited stronger adherence and auto-agglutination characteristics than wild-type cells, and were successfully immobilized (at approximately 2.5 mg/cm3) on polyurethane foam. Hydrogen production from the cell-immobilized polyurethane foams was monitored in repetitive batch reactions and flow reactor studies. The total hydrogen production in triple-repetitive batch reactions reached 0.6 mol/mol glucose, and the hydrogen production rate in the flow reactor was 42 mL·h−1·L−1. The AtaA production achieved simple and immediate immobilization of E. aerogenes on the foam, enabling repetitive and continuous hydrogen production. This report newly demonstrates the production of AtaA on the cell surfaces of bacterial genera other than Acinetobacter, and can simplify and accelerate the immobilization of whole-cell catalysts.