Calcium-silicate mesoporous nanoparticles loaded with chlorhexidine for both anti- Enterococcus faecalis and mineralization properties

Graphene Oxide/Black Phosphorus Functionalized Collagen Scaffolds with Enhanced Near-Infrared Controlled In Situ Biomineralization for Promoting Infectious Bone Defect Repair through PI3K/Akt Pathway

Infectious bone defects resulting from surgery, infection, or trauma are a prevalent clinical issue. Current treatments commonly used include systemic antibiotics and autografts or allografts. Nevertheless, therapies come with various disadvantages, including multidrug-resistant bacteria, complications arising from the donor site, and immune rejection, which makes artificial implants desirable. However, artificial implants can fail due to bacterial infections and inadequate bone fusion after implantation. Thus, the development of multifunctional bone substitutes that are biocompatible, antibacterial, osteoconductive, and osteoinductive would be of great clinical importance. This study designs and prepares 2D graphene oxide (GO) and black phosphorus (BP) reinforced porous collagen (Col) scaffolds as a viable strategy for treating infectious bone defects. The fabricated Col-GO@BP scaffold exhibited an efficient photothermal antibacterial effect under near-infrared (NIR) irradiation. A further benefit of the NIR-controlled degradation of BP was to promote biomineralization by phosphorus-driven and calcium-extracted phosphorus in situ. The abundant functional groups in GO could synergistically capture the ions and enhance the in situ biomineralization. The Col-GO@BP scaffold facilitated osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSC) by leveraging its mild photothermal effect and biomineralization process, which upregulated heat shock proteins (HSPs) and activated PI3K/Akt pathways. Additionally, systematic in vivo experiments demonstrated that the Col-GO@BP scaffold obviously promotes infectious bone repair through admirable photothermal antibacterial performance and enhanced vascularization. As a result of this study, we provide new insights into the photothermal activity of GO@BP nanosheets, their degradation, and a new biological application for them.

Application of Nanomaterials in Endodontics

Recent advancements in nanotechnology have introduced a myriad of potential applications in dentistry, with nanomaterials playing an increasing role in endodontics. These nanomaterials exhibit distinctive mechanical and chemical properties, rendering them suitable for various dental applications in endodontics, including obturating materials, sealers, retro-filling agents, and root-repair materials. Certain nanomaterials demonstrate versatile functionalities in endodontics, such as antimicrobial properties that bolster the eradication of bacteria within root canals during endodontic procedures. Moreover, they offer promise in drug delivery, facilitating targeted and controlled release of therapeutic agents to enhance tissue regeneration and repair, which can be used for endodontic tissue repair or regeneration. This review outlines the diverse applications of nanomaterials in endodontics, encompassing endodontic medicaments, irrigants, obturating materials, sealers, retro-filling agents, root-repair materials, as well as pulpal repair and regeneration. The integration of nanomaterials into endodontics stands poised to revolutionize treatment methodologies, presenting substantial potential advancements in the field. Our review aims to provide guidance for the effective translation of nanotechnologies into endodontic practice, serving as an invaluable resource for researchers, clinicians, and professionals in the fields of materials science and dentistry.

Synthesis and characterization of mesoporous zinc oxide nanoparticles and evaluation of their biocompatibility in L929 fibroblasts

OBJECTIVES

This study aimed to synthesize and characterize mesoporous zinc oxide nanoparticles (ZnO NPs) and also to evaluate the cytotoxicity of mesoporous ZnO NPs on L929 mouse fibroblast cell lines using 3-(4,5- dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay.

MATERIALS AND METHODS

The synthesized mesoporous ZnO NPs were extensively characterized using X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectra (EDAX), Fourier-transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS). The cytotoxicity of mesoporous ZnO NPs was assessed by MTT assay. The study groups for cytotoxicity assay were normal saline, 0.1% calcined mesoporous ZnO NP solution, 1% calcined mesoporous ZnO NP solution, 0.1% noncalcined mesoporous ZnO NP solution, 1% noncalcined mesoporous ZnO NP solution, 0.1% ZnO NP solution, 1% ZnO NP solution, 2% chlorhexidine, and phosphate-buffered saline (PBS). The percentages of mean ± standard deviation of viable cells were analyzed.

RESULTS

Characterization of mesoporous ZnO NPs revealed that all the particles were in a more or less spherical shape with a wide particle size distribution of 70-100 nm. TEM image showed the uniformed and aggregated ZnO NPs with a typical size of 10-15 nm. BET analysis showed a mesoporous structure for the prepared mesoporous ZnO NPs. According to the MTT assay, chlorhexidine had the lowest cell viability percentage. Cell viability percentages of 0.1% mesoporous ZnO NP solutions (calcined and noncalcined) were statistically, significantly higher than 0.1% ZnO NP solution (p < .05). Cell viability percentages of 0.1% calcined and noncalcined mesoporous ZnO NP solutions and 0.1% ZnO NP solution were statistically, significantly higher than the 1% solutions (p < .05).

CONCLUSION

Mesoporous ZnO NPs exhibited less cytotoxicity against L929 mouse fibroblast cell lines compared to CHX and ZnO NPs, hence are safe to use.

Nanoparticles and Their Antibacterial Application in Endodontics

Root canal treatment represents a significant challenge as current cleaning and disinfection methodologies fail to remove persistent bacterial biofilms within the intricate anatomical structures. Recently, the field of nanotechnology has emerged as a promising frontier with numerous biomedical applications. Among the most notable contributions of nanotechnology are nanoparticles, which possess antimicrobial, antifungal, and antiviral properties. Nanoparticles cause the destructuring of bacterial walls, increasing the permeability of the cell membrane, stimulating the generation of reactive oxygen species, and interrupting the replication of deoxyribonucleic acid through the controlled release of ions. Thus, they could revolutionize endodontics, obtaining superior results and guaranteeing a promising short- and long-term prognosis. Therefore, chitosan, silver, graphene, poly(lactic) co-glycolic acid, bioactive glass, mesoporous calcium silicate, hydroxyapatite, zirconia, glucose oxidase magnetic, copper, and zinc oxide nanoparticles in endodontic therapy have been investigated in the present review. The diversified antimicrobial mechanisms of action, the numerous applications, and the high degree of clinical safety could encourage the scientific community to adopt nanoparticles as potential drugs for the treatment of endodontic diseases, overcoming the limitations related to antibiotic resistance and eradication of the biofilm.

Nanocomposite orthopaedic bone cement combining long-acting dual antimicrobial drugs

Antibiotic loaded bone cements are widely used in total joint replacement (TJR); despite many limitations such as a burst release which leads to antibiotic concentration below inhibitory levels and possibly contributing to the selection of antibiotic resistant strains. In order to address such limitations and to simultaneously address antibiotic resistance and short-term antimicrobial activity, we developed a nanocomposite bone cement capable of providing a controlled release of antimicrobial agents from bone cement to act as prophylaxis or treatment against prosthetic joint infections (PJIs). Gentamicin and chlorhexidine were loaded in combination on silica nanoparticles surface using layer-by-layer coating technique (LbL) combining hydrolysable and non-hydrolysable polymers. The drug release from the nanocomposite continued for >50 days at concentrations higher than the commercial formulation containing the same amount of antimicrobial drugs, where burst release for few days were observed. Moreover, the nanocomposite bone cement showed superior antimicrobial inhibition without adversely affecting the mechanical properties or the ability of osteoblasts to grow. In vivo experiments with an infected bone lesion model along with mass-spectrometric analysis also provided further evidence of efficacy and safety of the implanted nanocomposite material as well as its prolonged drug eluting profile. The developed nanocomposite bone cement has the potential to reduce PJIs and enable treatment of resistant established infections; moreover, the newly developed LbL based nano-delivery system may also have wider applications in reducing the threat posed by antimicrobial resistance.

Enhanced in vitro antibacterial effect against Enterococcus faecalis by using both low-dose cetylpyridinium chloride and silver ions

BACKGROUND

Enterococcus faecalis (E. faecalis) is frequently isolated from root canals with failed root canal treatments. Due to the strong ability of E. faecalis to resist many often-used antimicrobials, coping with E. faecalis infections remains a challenge. The aim of this study was to investigate the synergistic antibacterial effect of low-dose cetylpyridinium chloride (CPC) and silver ions (Ag⁺) against E. faecalis in vitro.

METHODS

The minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and the fractional inhibitory concentration index (FICI) were used to confirm the existence of the synergic antibacterial activity between low-dose CPC and Ag⁺. Colony-forming unit (CFU) counting, time-killing curve and dynamic growth curve were used to evaluate the antimicrobial effects of CPC and Ag⁺ combinations against planktonic E. faecalis. Four weeks biofilms were treated with drug-contained gels to determine the antimicrobial effect on biofilm-resident E.faecalis, and the integrity of E.faecalis and its biofilms were observed by FE-SEM. CCK-8 assays was used to test the cytotoxicity of CPC and Ag⁺ combinations on MC3T3-E1 cells.

RESULTS

The results confirmed the synergistic antibacterial effect of low-dose CPC and Ag⁺ against both planktonic and 4-week biofilm E. faecalis. After the addition of CPC, the sensitivity of both planktonic and biofilm-resident E. faecalis to Ag⁺ improved, and the combination showed good biocompatibility on MC3T3-E1 cells.

CONCLUSIONS

Low-dose CPC enhanced the antibacterial ability of Ag⁺ against both planktonic and biofilm E.faecalis with good biocompatibility. It may be developed into a novel and potent antibacterial agent against E.faecalis, with low toxicity for root canal disinfection or other related medical applications.

Characterization of Ag-Ion Releasing Zeolite Filled 3D Printed Resins

There has been profound growth in the use of 3D printed materials in dentistry in general, including orthodontics. The opportunity to impart antimicrobial properties to 3D printed parts from existing resins requires the capability of forming a stable colloid incorporating antimicrobial fillers. The objective of this research was to characterize a colloid consisting of a 3D printable resin mixed with Ag-ion releasing zeolites and fumed silica to create 3D printed parts with antiviral properties. The final composite was tested for antiviral properties against SARS-CoV-2 and HIV-1. Antiviral activity was measured in terms of the half-life of SARS-CoV-2 and HIV-1 on the composite surface. The inclusion of the zeolite did not interfere with the kinetics measured on the surface of the ATR crystal. While the depth of cure, measured following ISO4049 guidelines, was reduced from 3.8 mm to 1.4 mm in 5 s, this greatly exceeded the resolution required for 3D printing. The colloid was stable for at least 6 months and the rheological behavior was dependent upon the fumed silica loading. The inclusion of zeolites and fumed silica significantly increased the flexural strength of the composite as measured by a 3 point bend test. The composite released approximately 2500 μg/L of silver ion per gram of composite as determined by potentiometry. There was a significant reduction of the average half-life of SARS-CoV-2 (1.9 fold) and HIV-1 (2.7 fold) on the surface of the composite. The inclusion of Ag-ion releasing zeolites into 3D-printable resin can result in stable colloids that generate composites with improved mechanical properties and antiviral properties.

Effects of immunoglobulin Y-loaded amorphous calcium phosphate on dentinal tubules occlusion and antibacterial activity

Aim: This study aimed to evaluate the effects of immunoglobulin Y (IgY)-loaded amorphous calcium phosphate (ACP) (IgY@ACP) on dentinal tubule occlusion and antibacterial activity.

Methodology: IgY@ACP was synthesized based on a biomimetic mineralization strategy. The structure was examined by transmission electron microscopy and Fourier transform infrared spectroscopy. The IgY release property was assessed in vitro. The cell biocompatibility of IgY@ACP was evaluated by CCK-8. The dentin disks were prepared using healthy human molars, and their dentinal tubules were exposed to EDTA. Subsequently, they were randomly selected and treated with or without IgY@ACP for 7 days. The tubule occlusion morphologies and newly formed layers were observed by scanning electron microscopy (SEM) and x-ray diffraction, respectively. To evaluate the acid resistance and abrasion resistance of IgY@ACP, dentin disks that were treated for 1 day were immersed in acid solution or subjected to a toothbrush. The antibacterial effects against Streptococcus mutans (S. mutans) were evaluated by colony-forming unit (CFU) counting, adhesion property assessment, and crystal violet and live/dead bacterial staining. Finally, the occlusion effect was evaluated in rat incisors in vivo. One-way analysis of variance (ANOVA) was performed for statistical analysis. The level of significance was set at 0.05.

Results: IgY@ACP presented an amorphous phase with a nanosize (60–80 nm) and sustained release of protein within 48 h. The CCK-8 results showed that IgY@ACP had good biocompatibility. After treatment with IgY@ACP for 1 day, the majority of dentinal tubules were occluded by a 0.3-μm-thick mineralized layer. Seven days later, all dentinal tubules were occluded by mineralization with a thickness of 1.4 μm and a depth of 16 μm. The newly mineralized layer showed hydroxyapatite-like diffraction peaks. In addition, IgY@ACP had good acid and abrasion resistance. After treatment with IgY@ACP, the CFU counting and adhesion rate of S. mutans were significantly reduced, the crystal violet staining was lighter, and the S. mutans staining revealed more dead cells. Most importantly, IgY@ACP had a certain occluding property in rat incisors in vivo.

Conclusion: IgY@ACP can effectively occlude dentinal tubules with acid-resistant stability and has prominent anti-S. mutans effects, rendering it a potentially suitable desensitization material in the clinic.

Strontium- and peptide-modified silicate nanostructures for dual osteogenic and antimicrobial activity

Developing multifunctional nanostructures that promote bone repair while fighting infection is highly desirable in bone regenerative therapies. Previous efforts have focused on achieving one property or another by altering the chemical makeup of nanostructures or using growth factors or antibiotics. We present nanostructures with several simultaneous functional attributes including positive effects of strontium on bone formation and prevention of osteoclast differentiation along with incorporation of antimicrobial peptides (AMP) to prevent infection. To form these multifunctional nanostructures, mesoporous calcium silicate (CaMSN) was modified with high levels of strontium. For this, CaMSNs were either partially substituted (20 wt% Ca) or completely replaced with strontium (Sr) to form Sr-CaMSN or SrMSN. The mesoporous nature of these bioactive silicate nanostructures rendered a configuration for substantial AMP loading as well as their effective delivery. The physico-chemical and structural characterization of synthesized MSNs confirmed the mesoporous nature of the synthesized MSNs and their total surface area, pore size, pore volume and SBF-mediated bioactivity remained unaltered with the incorporation of Sr. However, biological evaluation confirmed that synthesized SrMSN upregulated osteogenic differentiation of mesenchymal stromal cells and significantly downregulated osteoclast differentiation. Also, the AMP-loaded MSNs prevented formation and growth of methicillin resistant Staphylococcus aureus (MRSA) biofilms. Thus, high Sr-containing AMP-loaded SrMSNs may combat MRSA-associated infection while promoting bone regeneration. The controlled availability of therapeutic Sr and AMP release as SrMSN degrade enables its potential application in bone tissue regeneration.

Present status and future directions of intracanal medicaments

Two fundamental goals of endodontic treatment are to prevent or treat apical periodontitis. From a predictive perspective, several variables can affect the outcome of root canal treatment. Some of these variables depend on intraoperative factors, which include irrigation technique, size of the apical preparation, use of intracanal medicaments or the number of appointments necessary to complete the treatment. However, the outcome may also be affected by host and microbial factors. The intensity of periradicular bone loss or tissue damage, the presence of preoperative pain and associated conditions such as mechanical allodynia and central sensitization, the anatomical complexity of the apical portion of the canal, and the virulence and longevity of the bacterial infection can all have a profound influence on the outcome. Furthermore, numerous medical conditions have been reported to decrease the capability of the immune system to heal the periapical tissues. It is the clinician's responsibility to analyse these variables and incorporate them into the disinfection strategy to maximize the chances of healing. This narrative review will focus on the present status of intracanal medicaments, the clinical indications for their use and future directions for research.

Efficacy of Ciprofloxacin, Metronidazole and Minocycline in Ordered Mesoporous Silica against Enterococcus faecalis for Dental Pulp Revascularization: An In-Vitro Study

Pulp revascularization of teeth with necrotic pulp has become an alternative treatment in cases with immature apex. Microbial control is essential to achieve a successful outcome and continued root development. Enterococcus faecalis (E. faecalis) is the most frequently isolated bacterial species in root canals of endodontically failed teeth. Our main goal was to compare the in-vitro antimicrobial efficacy of different antibiotic formulations delivered by ordered mesoporous silica (OMS) against E. faecalis. To determine antibiotic susceptibility, we tested OMS and triple antibiotic paste (TAP; ciprofloxacin:metronidazole:minocycline) with different reagents in different concentrations, using the Kirby−Bauer disk diffusion method. OMS and metronidazole showed no antibacterial activity against E. faecalis. Mixtures of OMS and antibiotics in proportions of 2:2:14 and 4:1:7 (mg/L of ciprofloxacin:metronidazole:minocycline, respectively) showed the lowest antibacterial activity. The antibacterial activity of the combined solutions of ciprofloxacin and metronidazole was significantly higher (p < 0.005). Combinations in different concentrations of minocycline, ciprofloxacin, and metronidazole in OMS have shown activity against E. faecalis, although the combined use of ciprofloxacin and metronidazole has shown the most effective results. This study demonstrates the efficacy of intracanal antibiotic combination paste activity against E. faecalis, avoiding the use of minocycline, whose undesirable effect of teeth staining is a common problem for patients and professionals in dental clinic.

Drug delivery systems for oral disease applications

There are many restrictions on topical medications for the oral cavity. Various factors affect the topical application of drugs in the oral cavity, an open and complex environment. The complex physical and chemical environment of the oral cavity, such as saliva and food, will influence the effect of free drugs. Therefore, drug delivery systems have served as supporting structures or as carriers loading active ingredients, such as antimicrobial agents and growth factors (GFs), to promote antibacterial properties, tissue regeneration, and engineering for drug diffusion. These drug delivery systems are considered in the prevention and treatment of dental caries, periodontal disease, periapical disease, the delivery of anesthetic drugs, etc. These carrier materials are designed in different ways for clinical application, including nanoparticles, hydrogels, nanofibers, films, and scaffolds. This review aimed to summarize the advantages and disadvantages of different carrier materials. We discuss synthesis methods and their application scope to provide new perspectives for the development and preparation of more favorable and effective local oral drug delivery systems.

Anti-Acid Biomimetic Dentine Remineralization Using Inorganic Silica Stabilized Nanoparticles Distributed Electronspun Nanofibrous Mats

Background

To manage the sharp pain of dentine hypersensitivity, various materials are utilized to conduct dentine remineralization. However, many prior materials are limited with their single function and complicated operations. In this study, silica and calcium (strontium) carbonates mineralized nano cellulose fibrous (Si/Ca(Sr)-NCF) mat with the ability to release acid resistant and biomimetic mineralizational silica/calcium (strontium) carbonate co-precipitation nanoparticles (Si/Ca(Sr) NPs) were fabricated. The dentine occluding effects, antibacterial activity and cytocompatibility of the Si/Ca(Sr)-NCF mats were evaluated.

Methods

The Si/Ca(Sr)-NCF mats were fabricated by dipping the electrospun nano cellulose fiber (NCF) into silica and calcium (strontium) carbonate liquid. Physicochemical characterizations and ion release were confirmed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), ion release assays and transmission electron microscopy (TEM). Sixty dentine discs were randomly divided into five groups: 1, blank NCF; 2, Si/Ca(Sr 0)-NCF; 3, Si/Ca(Sr 0.01)-NCF; 4, Si/Ca(Sr 0.05)-NCF; 5, Si/Ca(Sr 0.1)-NCF. Dentine discs were mineralized by the mats and observed with SEM immediately, after acid challenge and remineralized in artificial saliva. The releasing liquid was investigated by TEM and type I collagen model. Then, antibacterial property and cytocompatibility were evaluated.

Results

SEM and TEM results confirmed that the experiment mats continuously released amorphous Si/Ca(Sr) NPs and consequently realized anti-acid dentine biomimetic remineralization. Homogeneous surface coverage and collagen intrafibrillar mineralization in strontium adding groups illustrated the mineralization effect was not only by in site precipitation, but also collagen heterogeneous nucleation. Additionally, acceptable antibacterial and cytocompatibility properties were illustrated in low and middle Sr²⁺ containing mats.

Conclusion

In vitro studies on human dentine discs and type I collagen demonstrated that Si/Ca(Sr)–NCF system was a multifunction system inducing anti-acid, biomimetic, antibacterial and cytocompatible dentine remineralization. This multifunction mat would be a promising DH treatment candidate for complicated exposed dentine surfaces.

Sol-gel synthesis of amorphous calcium phosphate nanoparticles in brown rice substrate and assessment of their cytotoxicity and antimicrobial activities

OBJECTIVE

This study intended to perform a synthesizing procedure for amorphous calcium phosphate (ACP) through a green template by the usage of brown rice (BR).

MATERIALS AND METHODS

ACP nanoparticles were obtained by application of a sol-gel method and comprehensively characterized using X-ray powder diffraction (XRD), zeta potential, fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), and atomic force microscopy (AFM). Cytotoxic activity of ACP was evaluated in human epithelial type 2 (HEp-2) cell lines. The antibacterial effects of nanoparticles were appraised against Gram-positive Streptococcus mutans and Enterococcus faecalis.

RESULTS

The procedures for the evaluation of the characterization outcomes, dispersion, and stability of our product were confirmed by observing the smooth and uniformed surfaces of ACP. The zeta potential value of the synthesized sample was -22 mV, which indicates its acceptable stable condition caused by electrostatic repulsion. The cytotoxicity of the ACP nanoparticles was investigated in HEp-2 cells, and results showed no cytotoxicity for the synthesized nanoparticles. Also, the obtained minimum inhibitory concentration (MIC) of ACP nanoparticles in opposition to S. mutans and E. faecalis was 15 and 20 µg/ml, respectively, indicating the resistance of E. faecalis in comparison to S. mutans and MBC for synthesized nanoparticles against S. mutans and E. faecalis strains was 20 and 25 µg/ml.

CONCLUSION

The present study showed that this compound has no toxicity on the examined cell line. Also, the antibacterial properties of the synthesized ACP were approved by the obtained data, which enables the application of this material for therapeutic purposes in the pharmaceutical industry.

Enhanced antibacterial effect against Enterococcus faecalis by silver ions plus Triton X-100 with low concentrations and cytotoxicity

Enterococcus faecalis (E. faecalis) is commonly considered to be one of chief culprits of secondary and persistent root canal infections. As antibiotic resistance has become a global issue, in order to reduce the use of antibiotics, metal ions have recently been widely used as an alternative. Silver ions (Ag⁺) have been proved to be a strong bactericide but with high cytotoxicity and discoloration property. Triton X-100 (TX-100) and Ag⁺ were co-used for the first time as a clinical intracanal medication to obtain both enhanced antibacterial effect and low cytotoxicity. The synergistic antibacterial effect of TX-100 + Ag⁺ was tested on both planktonic and biofilm-resident E. faecalis on dentine. And the cytotoxicity was tested on MC3T3-E1 cells. Results confirmed the antibacterial activity against both planktonic and biofilm-resident E. faecalis was dramatically improved after TX-100 incorporation. TX-100 and Ag⁺ mixture demonstrated a similar inhibitory effect as the 2% chlorhexidine (CHX), while the cytotoxicity was much lower than 2% CHX (p < 0.05). In conclusion, TX-100 + Ag⁺ mixture might be developed into a new effective intracanal medication as the 2% CHX.

Biogenic ZnO Nanoparticles Synthesized from Origanum vulgare Abrogates Quorum Sensing and Biofilm Formation in Opportunistic Pathogen Chromobacterium violaceum

This study presents an inexpensive, eco-friendly, and simple green synthesis of ZnO nanoparticles using Origanum vulgare extract. These nanoparticles are non-hazardous, environmentally friendly, and cheaper than other methods of biosynthesis. Ongoing research determines the role of phytochemicals in the fabrication and biosynthesis of ZnO NPs and their role in antibacterial activity and biomedical applications. Characterizations by fourier transform infrared spectroscopy (FTIR), diffuse reflectance UV-visible spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) determine the successful biosynthesis of ZnO NPs. Meanwhile, TEM and X-ray diffraction studies approximated the spherical morphology and crystalline nature of biosynthesized ZnO NPs of nano size in the range of 20-30 nm. The global increase in drug resistance necessitates the search for new drugs with different mechanisms of action. Quorum sensing (QS), a cell-to-cell communication, has gained attention as an emerging drug target. It controls numerous biochemical processes in bacteria, which are essential for their survival and pathogenicity. The potential of nanomedicines has also been tested to synthesize new antibiotics to tackle drug resistance. ZnO NPs were explored for their antibacterial, antiquorum sensing, and antibiofilm activities with a bioreporter strain of Chromobacterium violaceum. Susceptibility testing results indicated the potential antibacterial activity of ZnO NPs with a minimum inhibitory concentration (MIC) of 4 µg/mL and minimum bactericidal concentration (MBC) of 16 µg/mL. Antiquorum-sensing assays revealed that these nanoparticles inhibit quorum sensing with minimum antiquorum sensing activity (MQSIC) of 1 µg/mL, without causing any bacterial growth inhibition. In addition, ZnO NPs inhibit biofilm formation at inhibitory and higher concentrations. RT-qPCR results supported the downregulation of the quorum sensing genes when C. violaceum was treated with ZnO NPs. The outcomes of this study are promising with regard to the biofilm and quorum sensing, emphasizing the potential applications of ZnO NPs against bacterial communication and biofilm formation.

Mesoporous Calcium-Silicate Nanoparticles Loaded with Low-Dose Triton-100+Ag+ to Achieve Both Enhanced Antibacterial Properties and Low Cytotoxicity for Dentin Disinfection of Human Teeth

Mesoporous calcium-silicate nanoparticles (MCSNs) are excellent biomaterials for controlled drug delivery and mineralization induction. In this study, MCSNs were loaded with low-dose silver ion (Ag⁺) and Triton X-100 (TX-100) as the M-AgTX to achieve both enhanced antibacterial properties and low cytotoxicity for dentin disinfection. The physicochemical property, biocompatibility, infiltration ability into dentinal tubules, anti-bacterial ability against both planktonic Enterococcusfaecalis (E. faecalis) and its biofilm on dentin, effects on dentin microhardness and in vitro mineralization property were systematically investigated. Results confirmed that the MCSNs and M-AgTX nanoparticles showed typical morphology of mesoporous materials and exhibited sustained release of chemicals with an alkaline pH value over time. M-AgTX also exhibited excellent biocompatibility on MC3T3-E1 cells and could eliminate 100% planktonic E. faecalis after 48-h treatment. On dentin slices, it could enter dentinal tubules by ultrasonic activation and inhibit the growth of E. faecalis on dentin. M-AgTX could completely inactive 28-day E. faecalis biofilm. TEM confirmed the destruction of cell membrane integrity and Ag⁺ infiltration into bacteria by M-AgTX. Besides, dentin slices medicated with M-AgTX nanoparticles displayed an increased microhardness. After being immersed in SBF for 7 days, apatite crystals could be observed on the surface of the material tablets. M-AgTX could be developed into a new multifunctional intra-canal medication or bone defect filling material for infected bone defects due to its sustained release profile, low cytotoxicity, infiltration ability, enhanced anti-bacterial and mineralization features.

Recent Advances Toward the Use of Mesoporous Silica Nanoparticles for the Treatment of Bacterial Infections

It is a fact that the use of antibiotics is inducing a growing resistance on bacteria. This situation is not only the consequence of a drugs’ misuse, but a direct consequence of a widespread and continuous use. Current studies suggest that this effect could be reversed by using abandoned antibiotics to which bacteria have lost their resistance, but this is only a temporary solution that in near future would lead to new resistance problems. Fortunately, current nanotechnology offers a new life for old and new antibiotics, which could have significantly different pharmacokinetics when properly delivered; enabling new routes able to bypass acquired resistances. In this contribution, we will focus on the use of porous silica nanoparticles as functional carriers for the delivery of antibiotics and biocides in combination with additional features like membrane sensitizing and heavy metal-driven metabolic-disrupting therapies as two of the most interesting combination therapies.

Evaluation of the anti-biofilm effect of poloxamer-based thermoreversible gel of silver nanoparticles as a potential medication for root canal therapy

The purpose of this study was to design silver nanoparticles (AgNPs) poloxamer thermoreversible gel (AgNPs-PL) and investigate whether this gel could provide sustained antibacterial activity against Enterococcus faecalis (E. faecalis) in the root canal. The gels fabricated were characterized in terms of gelatin temperature, particle size, in-vitro Ag⁺ release, and elemental content. Cytotoxicity of AgNPs-PL on primary human periodontal ligament fibroblasts (HPDLFs) was examined by CCK-8 assay. Characterization of AgNPs-PL gel revealed that it contained particles existing as large clumps/fused aggregates of different shapes, with a mean diameter of 21.624 ± 14.689 nm, exhibited sustained release of Ag⁺ for 9 days, and non-toxic to HPDLFs at a low dose (4–32 μg/mL) through 24, 48, and 72 h exposures. The antibacterial effect of 16 and 32 μg/mL concentrations of AgNPs-PL was compared with blank poloxamer gel (PL) and calcium hydroxide (CH) using three methods: (I) agar counting plate, (II) scanning electron microscope (SEM) observations, and (III) confocal laser scanning microscope (CLSM) analysis. AgNPs-PL at the two doses above was more effective than PL and CH in removing E. faecalis biofilm at 1, 3, 9 days. Thus, AgNPs-PL exhibits strong activity against E. faecalis and is easy to produce, with a continuous release profile of Ag⁺. AgNPs-PL gel may be a candidate for a new root canal disinfection.

Ca-Si mesoporous nanoparticles with the optimal Ag-Zn ratio inhibit the Enterococcus faecalis infection of teeth through dentinal tubule infiltration: an in vitro and in vivo study

Enterococcus faecalis is the main cause of refractory root canal infections in human teeth. The control of root canal infection is one of the conditions necessary for the successful treatment of refractory root canal infections. In the present study, nano-scale silver-zinc-calcium-silica particles loaded with different ratios of silver-zinc were successfully prepared (Ag0.5Zn3-MCSNs and Ag0.5Zn10-MCSNs). The release profiles, antibacterial activity against E. faecalis, infiltration depth into dentinal tubules, biocompatibility and effects on dentin microhardness in vitro were investigated. In addition, the antimicrobial effects of the particles against Enterococcus faecalis reinfection were evaluated in vivo in the teeth of beagle dogs. Ag, Zn, Ca and Si were released from Ag-Zn-MCSNs, and the atomic ratio of silver and zinc released can reach the optimal value of 1 : 12 (Ag0.5Zn10-MCSNs). The particles also showed good biocompatibility and antibacterial activity against Enterococcus faecalis and did not reduce the hardness of dentin. The nanoparticles could be driven into the dentinal tubules of dentin slices by ultrasonic activation. In the root canals of beagle dogs, both Ag0.5Zn3-MCSNs and Ag0.5Zn10-MCSNs demonstrated strong preventive effects against E. faecalis infection. The Ag-Zn-Ca-Si mesoporous nanoparticles may develop into a new effective root canal disinfectant or root canal sealer.

Mesoporous calcium silicate nanoparticles for superficial dental tissue reconstruction, in vitro and in vivo

The underlying dentin could be exposed to a humid atmosphere filled with bacteria if the covering enamel layer is broken because of external chemical and physical conditions. Accordingly, some diseases like bacterial invasion and dentin hypersensitivity often occur, which impact the daily life of patients. The study is aimed at evaluating the occluding effects of mesoporous calcium silicate nanoparticles (MCSNs) on the dentinal tubules in vitro and in vivo, as well as the antibacterial property and drug delivery ability when loaded with chlorhexidine (CHX) in vitro. MCSNs were synthesized according to the standard protocol. After a series of complimentary evaluations in vitro and in vivo, it was found that MCSNs and CHX–MCSNs could continually form apatite-like enamel layers on the exposed dentinal tubules and significantly reduced dentin permeability both in vitro and in vivo. Besides, MCSN and CHX–MCSN possessed low cytotoxicity in vitro, and only mild pulp inflammation was observed in two MCSNs containing groups in vivo. In addition, MCSN loaded with CHX released CHX sustainably and revealed a significant antibacterial effect against E. faecalis in vitro. Therefore, the results suggest that MCSN could be used as a promising biomaterial to occlude the dentinal tubules and carry antibiotics for avoiding further pulp infection.

MCSNs could be used as a promising biomaterial for occluding the dentinal tubules in vitro and in vivo. Also, the outstanding drug delivery and antibacterial properties enable it to carry antibiotics easily for inhibiting deeper pulp infection.

Fabrication of nanoparticles for bone regeneration: new insight into applications of nanoemulsion technology

Introducing synthetic bone substitutes into the clinic was a major breakthrough in the regenerative medicine of bone. Despite many advantages of currently available bone implant materials such as biocompatiblity and osteoconductivity, they still suffer from relatively poor bioactivity, osteoinductivity and osteointegration. These properties can be effectively enhanced by functionalization of implant materials with nanoparticles such as osteoinductive hydroxyapatite nanocrystals, resembling inorganic part of the bone, or bioactive polymer nanoparticles providing sustained delivery of pro-osteogenic agents directly at implantation site. One of the most widespread techniques for fabrication of nanoparticles for bone regeneration applications is nanoemulsification. It allows manufacturing of nanoscale particles (<100 nm) that are injectable, 3D-printable, offer high surface-area-to-volume-ratio and minimal mass transport limitations. Nanoparticles obtained by this technique are of particular interest for biomedical engineering due to fabrication procedures requiring low surfactant concentrations, which translates into reduced risk of surfactant-related in vivo adverse effects and improved biocompatibility of the product. This review discusses nanoemulsion technology and its current uses in manufacturing of nanoparticles for bone regeneration applications. In the first section, we introduce basic concepts of nanoemulsification including nanoemulsion formation, properties and preparation methods. In the next sections, we focus on applications of nanoemulsions in fabrication of nanoparticles used for delivery of drugs/biomolecules facilitating osteogenesis and functionalization of bone implants with special emphasis on biomimetic hydroxyapatite nanoparticles, synthetic polymer nanoparticles loaded with bioactive compounds and bone-targeting nanoparticles. We also highlight key challenges in formulation of nanoparticles via nanoemulsification and outline potential further improvements in this field.

Simvastatin decreases the silver resistance of E. faecalis through compromising the entrapping function of extracellular polymeric substances against silver

Enterococcus faecalis (E. faecalis) is a Gram-positive bacterium closely related to many refractory infections of human and shows the resistant ability against the antibacterial effects of silver. Simvastatin is a semisynthetic compound derived from lovastatin and a hydroxymethyl glutaryl coenzyme A(HMG-COA) reductase inhibitor showing certain inhibitive effects on bacteria. The main purpose of this study was to establish and characterize the Ag⁺/silver nanoparticles (AgNPs)-resistant E. faecalis, and further evaluate the function of extracellular polymeric substances (EPS) in the silver resistance and the effect of simvastatin on the silver-resistance of E. faecalis. The results showed that the established silver-resistant E. faecalis had strong resistance against both Ag⁺ and AgNPs and simvastatin could decrease the silver-resistance of both original and Ag⁺/AgNPs-resistant E. faecalis. The Transmission electron microscopy (TEM), High-angle annular dark-field (HAADF) and mapping images showed that the silver ions or particles aggregated and confined in the EPS on surface areas of the cell membrane when the silver-resistant E. faecalis were incubated with Ag⁺ or AgNPs. When the simvastatin was added, the silver element was not confined in the EPS and entered the bacteria. These findings may indicate that the silver resistance of E. faecalis was derived from the entrapping function of EPS, but simvastatin could compromise the function of EPS to decrease the silver resistant ability of E. faecalis.

Efficacy and potential use of novel sustained release fillers as intracanal medicaments against Enterococcus faecalis biofilm in vitro

Background

Enterococcus faecalis is a bacterium frequently isolated after failed root canal therapy. This study analyzed the antibacterial and antibiofilm effects in vitro of sustained-release fillers (SRF) containing cetylpyridinium chloride (CPC) against vancomycin resistant E. faecalis.

Methods

First, the solidification capability was tested by introducing liquid SRF into phosphate buffered saline, followed by 30 s of vortexing. The antimicrobial effects of SRF-CPC against static monospecies biofilms were analyzed with a metabolic assay. Inhibition of biofilm formation was tested by exposing daily refreshed E. faecalis suspensions to SRF-CPC for 9 weeks. To evaluate the effects of SRF-CPC against preformed biofilms, biofilms were grown for 1, 3 and 7 days, and then treated with SRF-CPC for 24 h. Biofilm kill time was tested by applying SRF-CPC to a 3-day-old biofilm and measuring its viability at different time points. All experiments were compared to Placebo SRFs and to untreated control biofilms. Data were analyzed with two-way ANOVA followed by Tukey’s test. Results were considered significant at P < 0.05.

Results

The liquid SRF solidified within seconds and no structural changes were observed after 30 s of vortexing at maximum speed. SRF-CPC inhibited E. faecalis biofilm formation for 7 weeks and significantly reduced its viability in weeks 8 and 9. Mature biofilms grown for 1, 3 and 7 days were destructed by SRF-CPC in less than 24 h. Fifty percent of a 3-day-old biofilm was destructed in 2 h and complete destruction occurred in less than 12 h. (P < 0.05 in all cases, compared to SRII-Placebo).

Conclusions

SRF-CPC’s physical properties and long-lasting anti-biofilm effects make it a promising coadjuvant medication for endodontic therapy.

Electronic supplementary material

The online version of this article (10.1186/s12903-019-0879-1) contains supplementary material, which is available to authorized users.

Sustained-Release Fillers for Dentin Disinfection: An Ex Vivo Study

Enterococcus faecalis is the most commonly recovered species from failed root canal treatments. In this study, we tested the capability of a novel intracanal sustained-release filler (SRF) containing cetylpyridinium chloride (CPC) to disinfect dentinal tubules of segmented human tooth specimens. Human dental root specimens were infected with E. faecalis V583 for 3 weeks in a static environment. The tested intracanal medicaments were SRF-CPC and calcium hydroxide (CH). Each medicament was introduced into the canal of the dental specimen and incubated for 7 days. The bacteriological samples were taken by shaving the dentine surrounding the root canal with dental burs ranging in size from ISO 014-020. The obtained dentine powder was collected in test tubes containing phosphate-buffered saline, sonicated, and plated on agar plates. Colony-forming units were counted after 48 h of incubation. Random specimens were also examined under confocal laser scanning microscopy and scanning electron microscopy. A statistical difference was found in the bacterial counts obtained from all layers of infected dentin between the control and the SRF-CPC groups. CH reduced bacterial viability significantly only in the first layer of the infected dentin, up to 150 μm into the dentinal tubules. CLSM images showed that SRF-CPC killed most bacteria throughout the infected dentin up to 700 μm of penetration. SEM images demonstrated the adhesion ability of SRF-CPC to the dentinal wall. In conclusion, SRF-CPC is a potential intracanal medicament for disinfecting dentinal tubules.

Preparation of a novel bone wax with modified tricalcium silicate cement and BGs

Amino-grafted and vaterite-contained tricalcium silicate cement (A-V-C₃S) was composited with 58S bioglass/chitosan/carboxy methyl cellulose (BG/CS/CMC, referred as BGs) to surmount the non-absorbability and infection problems of traditional bone wax. Its material, bioactive, biocompatible and antibacterial properties were systematically characterized. The results revealed that A-V-C₃S/BGs possessed self-setting, injectable, mechanical and degradable abilities. A-V-C₃S/BGs (1:1 g/g) was optimum owing to its higher compressive strength (9.91 MPa) and lower pH value (7.6 to 8.1) in the test groups. In vitro immersion experiment demonstrated that A-V-C₃S/BGs had good hydroxyapatite formation ability, and its excellent cell adhesion, low cytotoxicity and superior cell proliferation were verified by mouse embryonic osteoblast precursor cells in cell tests. Compared with A-V-C₃S, antibacterial experiment illustrated the significantly enhanced antibacterial property of A-V-C₃S/BGs to Staphylococcus aureus and Escherichia coli.

PLGA submicron particles containing chlorhexidine, calcium and phosphorus inhibit Enterococcus faecalis infection and improve the microhardness of dentin

Enterococcus faecalis (E. faecalis), a Gram-positive facultative anaerobe, is reported to take responsibility for a large portion of refractory root canal infections and root canal re-infections of human teeth. Chlorhexidine is a strong bactericide against E. faecalis but cannot infiltrate into dentinal tubules. On the other hand, a common negative effect of root canal medicaments is the decrease of dentin microhardness. In this study, poly(D,L-lactic-co-glycolide) (PLGA) submicron particles were applied as delivery carriers to load and release the chlorhexidine as well as calcium and phosphorus. The release profiles, antibacterial ability against E. faecalis, infiltration ability into dentinal tubules, biocompatibility and effects on dentin microhardness of these particles were investigated. Results revealed that encapsulated chemicals could be released in a sustained manner from the particles. The particles also exhibited excellent biocompatibility on MC3T3-E1 cells and significant antimicrobial property against E. faecalis. On dentin slices, the particles could be driven into dentinal tubules by ultrasonic activiation and inhibit E. faecalis colonization. Besides, dentin slices medicated with the particles displayed an increase in microhardness. In conclusion, PLGA submicron particles carrying chlorhexidine, calcium and phosphorus could be developed into a new intra-canal disinfectant for dental treatments.

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Nano-carrier based drug delivery systems for sustained antimicrobial agent release from orthopaedic cementous material

Total joint replacement (TJR), such as hip and knee replacement, is a popular procedure worldwide. Prosthetic joint infections (PJI) after this procedure have been widely reported, where treatment of such infections is complex with high cost and prolonged hospital stay. In cemented arthroplasties, the use of antibiotic loaded bone cement (ALBC) is a standard practice for the prophylaxis and treatment of PJI. Recently, the development of bacterial resistance by pathogenic microorganisms against most commonly used antibiotics increased the interest in alternative approaches for antimicrobial delivery systems such as nanotechnology. This review summarizes the efforts made to improve the antimicrobial properties of PMMA bone cements using nanotechnology based antibiotic and non-antibiotic delivery systems to overcome drawbacks of ALBC in the prophylaxis and treatment of PJIs after hip and knee replacement.