Host-microbiome interactions regarding peri-implantitis and dental implant loss

Tissue-Safe Low-Temperature Plasma Treatment for Effective Management of Mature Peri-Implantitis Biofilms on Titanium Surfaces

The unique screw-shape design and microstructure of implants pose a challenge for mechanical debridement in removing biofilms. Biofilms exhibit increased resistance to antimicrobials relative to single planktonic cells, emphasizing the need for effective biofilm removal during periodontal therapy for peri-implantitis treatment. To tackle this issue, our team evaluated the effectiveness of low-temperature plasma (LTP) for disinfecting titanium discs contaminated with multispecies biofilms associated with peri-implantitis, specifically focusing on biofilms matured for 14 and 21 days as well as biofilms that had formed on StraumannⓇ Ti-SLA implants for 21 days. The biofilms included Actinomyces naeslundii, Porphyromonas gingivalis, Streptococcus oralis, and Veillonella dispar, which were grown in anaerobic conditions. These biofilms were subjected to LTP treatment for 1, 3, and 5 min, using distances of 3 or 10 mm from the LTP nozzle to the samples. Control groups included biofilms formed on Ti discs or implants that received no treatment, exposure to argon flow at 3 or 10 mm of distance for 1, 3, or 5 min, application for 1 min of 14 μg/mL amoxicillin, 140 μg/mL metronidazole, or a blend of both, and treatment with 0.12% chlorhexidine (CHX) for 1 min. For the implants, 21-day-old biofilms were treated with 0.12% CHX 0.12% for 1 min and LTP for 1 min at a distance of 3 mm for each quadrant. Biofilm viability was assessed through bacterial counting and confocal laser scanning microscopy. The impact of LTP was investigated on reconstituted oral epithelia (ROE) contaminated with P. gingivalis, evaluating cytotoxicity, cell viability, and histology. The results showed that a 1 min exposure to LTP at distances of 3 or 10 mm significantly lowered bacterial counts on implants and discs compared to the untreated controls (p < 0.017). LTP exposure yielded lower levels of cytotoxicity relative to the untreated contaminated control after 12 h of contamination (p = 0.038), and cell viability was not affected by LTP (p ≥ 0.05); thus, LTP-treated samples were shown to be safe for tissue applications, with low cytotoxicity and elevated cell viability post-treatment, and these results were validated by qualitative histological analysis. In conclusion, the study's results support the effectiveness of 1 min LTP exposure in successfully disinfecting mature peri-implantitis multispecies biofilms on titanium discs and implants. Moreover, it validated the safety of LTP on ROE, suggesting its potential as an adjunctive treatment for peri-implantitis.

Oral Microbiome Research in Biopsy Samples of Oral Potentially Malignant Disorders and Oral Squamous Cell Carcinoma and Its Challenges

This study aims to evaluate the potential benefits and challenges of integrating oral microbiome research into the clinical management of oral potentially malignant disorders (OPMD) and oral squamous cell carcinoma (OSCC). The oral microbiome has gained significant attention for its role in the pathogenesis and progression of these conditions, with emerging evidence suggesting its value as a diagnostic and prognostic tool. By critically analyzing current evidence and methodological considerations, this manuscript examines whether microbiome analysis in biopsy samples can aid in the early detection, prognosis, and management of OPMD and OSCC. The complexity and dynamic nature of the oral microbiome require a multifaceted approach to fully understand its clinical utility. Based on this review, we conclude that studying the oral microbiome in this context holds significant promise but also faces notable challenges, including methodological variability and the need for standardization. Ultimately, this manuscript addresses the question, “Should such research be undertaken, given the intricate interactions of various factors and the inherent obstacles involved?”, and also emphasizes the importance of further research to optimize clinical applications and improve patient outcomes.

Efficacy of mechanical debridement with adjunct antimicrobial photodynamic therapy against peri-implant subgingival oral yeasts colonization: A systematic review and meta-analysis

BACKGROUND

It is hypothesized that mechanical debridement (MD) with adjunct antimicrobial photodynamic therapy (aPDT) is more efficient in reducing peri-implant subgingival yeasts colonization (SYC) than MD alone. The aim of the present systematic review and meta-analysis was to evaluate randomized controlled trials (RCTs) that assessed the efficacy of MD with and without adjunct aPDT towards the reduction in peri-implant SYC.

METHODS

The focused question was "Is MD with adjunct aPDT more effective then MD alone in reducing peri-implant SYC?" Indexed databases were searched without time and language restrictions until February 2024. The Population/Patients, Intervention, Control, Outcome (PICO) strategy was adopted. The literature search was performed using the preferred reporting items for systematic reviews and meta-analysis guidelines. The risk of bias (RoB) was assessed using the Cochrane RoB tool.

RESULTS

Three randomized controlled trials with a follow-up duration of 90 days were included and processed for data extraction. In one study, all participants were male and in the remaining two studies, males and females were included. One study showed that peri-implant MD with adjunct aPDT is more effective in reducing SYC than MD alone. In another study, there was no significant difference in SYC following MD with or without adjunct aPDT. In one study, the role of peri-implant MD with adjunct aPDT remained unclear due to missing data. The overall RoB was high and low in one and two studies, respectively.

CONCLUSION

The role of MD with or without adjunct aPDT in reducing peri-implant SYC remains debatable.

Unraveling the Applicability of LbL Coatings for Drug Delivery in Dental Implant-Related Infection Treatment

Peri-implantitis is an inflammatory condition caused by bacterial biofilms adhered on dental implant surfaces that cause progressive tissue destruction from the host's inflammatory response. The adverse effects of peri-implantitis progression can go beyond just losing the implant. This highlights the importance of implementing strategies to stabilize disease in the short term. Layer-by-layer (LbL) assembly is a promising avenue in the field of peri-implantitis management due to its applicability with a variety of substances, in addition to being an easy, versatile, and flexible process for multilayer formation to act directly in the affected site. In this Review, our objective is to offer comprehensive chemical and biological insights into the LbL system, clarifying its specific application as antimicrobial coatings, with concern for the physical site and purpose. Additionally, we delve deeper into the concepts of onset and progression of peri-implantitis, aiming to elucidate the precise indications for employing the LbL system as a coating for implant abutments in peri-implantitis treatment. Finally, we correlate the chemical composition of the LbL system with its functionality while also addressing the challenges posed by the uncontrolled environment of the oral cavity, which ultimately restricts its clinical applicability.

Role of immune dysregulation in peri-implantitis

Peri-implantitis, a complex condition that can lead to dental implant failure, is characterized by inflammatory destruction resulting from immune dysregulation. Oral microbial dysbiosis and foreign body stimulation are the main factors contributing to such dysregulation, impairing immune cell function and triggering an inflammatory response. Immune dysregulation plays a critical role in the pathophysiology of peri-implantitis, impacting the balance of T cell subsets, the production of inflammatory factors, and immune-related molecular signaling pathways. Understanding the relationship between immune dysregulation and peri-implantitis is crucial for developing targeted strategies for clinical diagnosis and individualized treatment planning. This review explores the similarities and differences in the immune microenvironment of oral bacterial infections and foreign body rejection, analyzes the relevant molecular signaling pathways, and identifies new key targets for developing innovative immunotherapeutic drugs and effective and personalized treatment modalities for peri-implantitis. Additionally, it addresses the challenges and potential directions for translating immunotherapy into clinical practice for peri-implantitis, offering insights that bridge the gaps in current literature and pave the way for future research.

Experimental peri-implantitis induces neuroinflammation: An exploratory study in rats

PURPOSE

Cumulating evidence supports the close association between periodontal diseases, neuroinflammation and neurodegenerative pathologies, except for peri-implantitis (PI). Thus, this study explored the association between experimental PI and neuropathological changes in the rat brain.

MATERIALS AND METHODS

After bilateral first molars extraction, experimental PI was induced at titanium implants placed in the maxillae by lipopolysaccharide injections and ligature placement. Following 28-weeks of disease progression, the maxillae and brains were retrieved from 6 rats. Healthy brains from 3 rats were used as control. Brains were analyzed by immunohistochemistry to detect signs of neuroinflammation (interleukin (IL)-6 and tumor necrosis factor (TNF)-α)), microglial activation (IBA-1) and astrogliosis (GFAP). To explore signs of neurodegeneration, hematoxylin/eosin and Nissl stainings were used. Also, four different antibodies against amyloid beta (Aβ 1-42) were tested.

RESULTS

Chronic PI lesions showed peri-implant bone resorption accompanied by large inflammatory infiltrates. IL-6+ and TNF-α+ cells were found within the CA1 and Dentate Gyrus regions of the hippocampus of the PI-affected group, while almost no immune-positivity was detected in the control (p < 0.05). Detection of activated GFAP+ microglia and IBA-1+ astrocytes surface were significantly higher at the CA areas, and cerebral cortex of the PI-affected group, in comparison with control (p < 0.05). Shrunk neurons with pyknotic nuclei were inconsistently found among the PI-affected group, and these were almost not detected in control. No positive Aβ reactivity was detected in any of the samples.

CONCLUSION

Chronic experimental PI lesions led to an increased detection of IL-6 and TNF-α, GFAP+ microgliosis and IBA-1+ astrocytosis, and in some cases, neurodegeneration, in the rat brain.

Potential role of metal nanoparticles in treatment of peri-implant mucositis and peri-implantitis

Peri-implantitis (PI), a pathological condition associated with plaque, affects the tissues around dental implants. In addition, peri-implant mucositis (PIM) is a precursor to the destructive inflammatory PI and is an inflammation of the soft tissues surrounding the dental implant. It is challenging to eradicate and regulate the PI treatment due to its limited effectiveness. Currently, there is a significant interest in the development and research of additional biocompatible materials to prevent the failure of dental implants. Nanotechnology has the potential to address or develop solutions to the significant challenge of implant failure caused by cytotoxicity and biocompatibility in dentistry. Nanoparticles (NPs) may be used as carriers for the release of medicines, as well as to make implant coatings and supply appropriate materials for implant construction. Furthermore, the bioactivity and therapeutic efficacy of metal NPs in peri-implant diseases (PID) are substantiated by a plethora of in vitro and in vivo studies. Furthermore, the use of silver (Ag), gold (Au), zinc oxide, titanium oxide (TiO2), copper (Cu), and iron oxide NPs as a cure for dental implant infections brought on by bacteria that have become resistant to several medications is the subject of recent dentistry research. Because of their unique shape-dependent features, which enhance bio-physio-chemical functionalization, antibacterial activity, and biocompatibility, metal NPs are employed in dental implants. This study attempted to provide an overview of the application of metal and metal oxide NPs to control and increase the success rate of implants while focusing on the antimicrobial properties of these NPs in the treatment of PID, including PIM and PI. Additionally, the study reviewed the potential benefits and drawbacks of using metal NPs in clinical settings for managing PID, with the goal of advancing future treatment strategies for these conditions.

A carboxymethyl-resistant starch/polyacrylic acid semi-IPN hydrogel with excellent adhesive and antibacterial properties for peri-implantitis prevention

Hydrogels possess inherent characteristics that render them promising for the prevention of peri-implantitis. Nonetheless, hydrogels with singular network structures are incapable of concurrently achieving the desired adhesion and mechanical properties. In this work, a carboxymethyl resistant starch/polyacrylic acid semi-interpenetrating (CMRS/PAA semi-IPN) hydrogel was successfully prepared in one step. Its morphology, structure, mechanical properties, and adhesion properties were systematically assessed, which revealed a homogeneously porous structure with a commendable mechanical strength of 67.317 kPa and an adhesion strength of 63 kPa. Ciprofloxacin (Cip) was loaded in the CMRS/PAA hydrogel via in situ compounding. The in vitro kinetic study of drug release shows that the slow drug release efficiency exceeds 90 % in the weakly acidic microenvironment at the infection site after 72 h, indicating enhanced antimicrobial properties. The Cip-loaded hydrogel also exhibits a remarkable bacterial inhibition rate exceeding 99 % against the pathogenic bacterium P. gingivalis and good cytocompatibility and hemocompatibility in vitro. In summary, the current work explored a novel solution and direction for the development of anti-infective medical materials applicable to dental implants.

Nicotine promotes pathogenic bacterial growth and biofilm formation in peri-implant

Introduction. Peri-implantitis is a plaque-associated disease that leads to implant loss and arises from bacterial biofilms on the surface of the implant. Smoking is a risk factor for peri-implantitis and impedes treatment effectiveness. Additionally, aryl hydrocarbon receptor (AHR), IL-6, and IL-22 levels are related to peri-implantitis.Aim. We aimed to investigate the effects of nicotine on inflammatory response, bacterial growth and biofilm formation.Hypothesis/Gap Statement. We hypothesized that nicotine promoted pathogenic bacterial growth and biofilm formation, thereby aggravating inflammation.Methodology. The expression of AHR, IL-6 and IL-22 was measured in peri-implant sulci fluid using quantitative PCR and Western blot analyses. The cementum was incubated with bacterial suspension including Porphyromonas gingivalis, Streptococcus sanguinis and Fusobacterium nucleatum and treated with 100, 200, 250 and 300 µg ml-1 nicotine, and then, the absorbance and number of colony-forming units were detected. Biofilm formation was evaluated using the tissue culture plate method and safranin O staining. Carbohydrates and proteins were measured by the phenol-sulfuric acid method and the bicinchoninic acid method, respectively.Results. The results indicated that smoking increased the levels of AHR, IL-6 and IL-22. Functionally, nicotine promoted the growth of P. gingivalis, S. sanguinis and F. nucleatum. Additionally, it promoted the biofilm formation of these bacteria and increased the contents of carbohydrates and proteins.Conclusion. Nicotine promoted bacterial growth and biofilm build-up, suggesting that smoking may aggravate the progression of peri-implantitis.

Peri-Implantitis-Associated Microbiota before and after Peri-Implantitis Treatment, the Biofilm "Competitive Balancing" Effect: A Systematic Review of Randomized Controlled Trials

This systematic review of RCTs aimed to characterize short- and long-term changes in peri-implantitis-associated microbiota (total biofilm microbial load and predominant pathogens' counts) following (any) peri-implantitis treatment in systemically healthy, non-smoking, partially/totally edentulous adults. The study protocol, compliant with the PRISMA statement, was registered on PROSPERO (CRD42024514521) before the literature search. Data from 11 RCTs, assessed through the ROBINS-2 tool, were qualitatively synthesized. No data were retrieved on total edentulism, healthy peri-implant/periodontal sites, treated mucositis, gingivitis, and periodontitis sites. Shortly after treatment, Prevotella intermedia, Fusobacterium nucleatum, and Peptostreptococcus micros prevailed, indicating early colonization, as after implant placement. After both surgical and non-surgical approaches, although not eradicated, the peri-implant total biofilm load, red- and orange-complex species, and Aggregatibacter actinomycetemcomitans counts generally decreased for up to about three months. However, one month after treatment, red-complex species and Prevotella intermedia increased, likely due to persistent tissue-invasive bacteria, unresolved pathological conditions (high probing depth values) favoring anaerobiosis and dysbiosis, and a qualitatively and quantitatively decreased biofilm community, competing and balancing the predominant pathogens (biofilm "competitive balancing" effect), thus allowing recolonization by more virulent bacteria. Red-complex bacteria gradually leveled off to baseline at the six- and twelve-month follow-ups. Fusobacterium nucleatum remained almost unchanged after treatment.

The Oral Microbiome of Peri-Implant Health and Disease: A Narrative Review

Peri-implantitis disease has increased significantly over the last years, resulting in increased failure of implants. Many factors may play a role in implant complications and failure, including ones related to the oral microbiota. This literature review aims to summarize the current knowledge of microbiome of implants in health and disease, focusing not only on the presence/absence of specific microbiota or on their relative abundance, but also on their phenotypic expression and their complex relationships with the host. The authors examined the MEDLINE database and identified key topics about peri-implant oral microbiome in health and disease. The peri-implant microbiome differs from that of the tooth, both in health and disease, as they are structurally and chemically different. The adhesion and formation of the peri-implant biofilm can be affected by the surface energy, topography, wettability, and electrochemical charges of the implant surface. In addition, the morphogenesis of the tissues surrounding the dental implant also differs from the tooth, making the dental implant more susceptible to bacterial infection. This interplay between the microbiome and the host immune system in peri-implant infections still needs to be elucidated.

The influence of two distinct surface modification techniques on the clinical efficacy of titanium implants: A systematic review and meta-analysis

PURPOSE

To compare the effectiveness of anodized and sandblasted large-grit acid-etched surface modification implants in clinical applications.

METHODS

This systematic review has been registered at PROSPERO (CRD42023423656). A systematic search was performed using seven databases. The meta-analysis was performed using the RevMan 5.4 program and Stata 17.0 software. An analysis of the risk of bias in the included studies was conducted using the Cochrane Handbook for Systematic Reviews of Interventions and the Newcastle-Ottawa scale.

RESULTS

A comprehensive analysis of 16 studies, which collectively encompassed a total of 2768 implants, was finished. Following a five years follow-up, the meta-analysis showed that the cumulative survival rate of implants was lower in the anodized group compared to the sandblasted large-grit acid-etched group (RR, 3.47; 95 % confidence interval [CI], 1.23 to 9.81; P = 0.02). Furthermore, the anodized group and the sandblasted large-grit acid-etched group had similar marginal bone loss over the one to three years follow-up period. However, it was observed that the marginal bone loss increased at the five years follow-up period in the anodized group in comparison to the sandblasted large-grit acid-etched group (SMD, 2.98; 95 % CI, 0.91 to 5.06; P = 0.005). In terms of biological complications, plaque index, bleeding on probing, and probing pocket depth, we found no statistically significant differences between the anodized and sandblasted large-grit acid-etched group.

CONCLUSIONS

The sandblasted large-grit acid-etched group exhibited higher implants cumulative survival rate and less marginal bone loss compared to the anodized group. Moreover, both groups demonstrated similar incidences of biological complications, plaque index, bleeding on probing, and probing pocket depth, suggesting overall equivalence in these aspects.

Analysis of Peri-Implantitis Photothermal Therapy Effect According to Laser Irradiation Location and Angle: A Numerical Approach

In recent years, dental implants have become increasingly popular around the world. However, if the implant is not properly managed, inflammation may occur, and the implant itself may need to be removed. Peri-implantitis is a common inflammation that occurs in dental implants, and various laser treatments have recently been studied to eliminate it. In this study, the situation of removing peri-implantitis using photothermal therapy, one of the various laser treatments, was analyzed theoretically and numerically. The temperature distribution in the tissue for various laser irradiation locations, angles, and power was calculated based on heat transfer theory, and the degree of thermal damage to tissue was analyzed using the Arrhenius damage integral. In addition, the thermally damaged region ratio of inflamed and normal tissue was analyzed using the Arrhenius thermal damage ratio and normal tissue Arrhenius thermal damage ratio to confirm the trend of treatment results for each treatment condition. The results of the study showed that if only the thermal damage to the inflamed tissue is considered, the laser should be angled vertically, and the laser should be applied to the center of the inflamed tissue rather than close to the implant. However, if the thermal damage to the surrounding normal tissue is also considered, it was found that the laser should be applied at 1.0 mm from the right end of the inflamed tissue for maximum effect. This will allow for more accurate clinical treatment of peri-implantitis in the future.

Microbiome of diseased and healthy implants-a comprehensive microbial data analysis

Objective

The purpose of this systematic bioinformatics analysis was to describe the compositions and differences in submucosal microbial profiles of peri-implants' diseases and healthy implant.

Material and methods

PubMed, Embase, ETH Z, Scopus, CNKI, and Wanfang databases were searched to screen relevant literature on the analysis of peri-implant microflora based on the sequencing analysis technique of 16S ribosomal RNA (16S rRNA) gene. High-throughput sequencing of the 16S rRNA gene of microorganisms from healthy implants, peri-implant mucositis, and peri-implantitis was downloaded from the screened articles. EasyAmplicon and Usearch global algorithm were used to match the reads from each dataset to a full length of 16S rRNA or ITS gene sequence. The microorganisms based on the Human Oral Microbiome Database (HOMD) were re-classified, and the microbial diversity, flora composition, and differential species of the samples were re-analyzed, including taxonomic classification and alpha and beta diversity calculations. The co-occurrence network was also re-analyzed.

Results

A total of seven articles with 240 implants were included. Among them, 51 were healthy implants (HI), 43 were in the peri-implant mucositis (PM) group, and 146 were in the peri-implantitis (PI) group. A total of 26,483 OTUs were obtained, and 877 microorganisms were annotated. The alpha diversity including Chao1 (healthy implants, 121.04 ± 92.76; peri-implant mucositis, 128.21 ± 66.77; peri-implantitis, 131.15 ± 84.69) and Shannon (healthy implants, 3.25 ± 0.65; peri-implant mucositis, 3.73 ± 0.61; peri-implantitis, 3.53 ± 0.67) of the samples from the three groups showed a significant difference. The beta diversity of the three samples was statistically different among groups. The genera of Treponema and Fretibacterium were significantly more abundant in the PI group than in the other two groups, and the genus of Streptococcus was more abundant in the HI group. The relative abundance of Porphyromonas in the peri-implantitis group was 6.1%. The results of the co-occurrence network showed differences in the network topology among the three groups of samples. The most connected three genera in the healthy implants were Halomonas, Fusobacterium, and Fretibacterium. The most connected three genera in peri-implant mucositis were Alistipes, Clostridia UCG-014, and Candidatus Saccharimonas. The most connected three genera in the peri-implantitis group were Lachnoanaerobaculum, Fusobacterium, and Atopobium. The betweenness of Porphvromonas gingivalis (red complex) in the PI group (7,900) was higher than in the HI group (23).

Conclusions

The community compositions of peri-implant submucosal microorganisms were significantly different in healthy implants, peri-implant mucositis, and peri-implantitis. The submucosal microbial communities in peri-implantitis were characterized by high species richness and diversity compared with the healthy implants; the relative abundance of red complex, some members of the yellow complex, and some novel periodontal pathogens was higher in the peri-implantitis and peri-implant mucositis groups than in the healthy implant group. The core flora of the co-occurrence network of healthy implants, peri-implant mucositis, and peri-implantitis varied considerably. The peri-implantitis site presented a relative disequilibrium microbial community, and Porphyromonas may play an important role in the co-occurrence network.

Guided Plasma Application in Dentistry-An Alternative to Antibiotic Therapy

Cold atmospheric plasma (CAP) is a promising alternative to antibiotics and chemical substances in dentistry that can reduce the risk of unwanted side effects and bacterial resistance. AmbiJet is a device that can ignite and deliver plasma directly to the site of action for maximum effectiveness. The aim of the study was to investigate its antimicrobial efficacy and the possible development of bacterial resistance. The antimicrobial effect of the plasma was tested under aerobic and anaerobic conditions on bacteria (five aerobic, three anaerobic (Gram +/-)) that are relevant in dentistry. The application times varied from 1 to 7 min. Possible bacterial resistance was evaluated by repeated plasma applications (10 times in 50 days). A possible increase in temperature was measured. Plasma effectively killed 106 seeded aerobic and anaerobic bacteria after an application time of 1 min per 10 mm2. Neither the development of resistance nor an increase in temperature above 40 °C was observed, so patient discomfort can be ruled out. The plasma treatment proved to be effective under anaerobic conditions, so the influence of ROS can be questioned. Our results show that AmbiJet efficiently eliminates pathogenic oral bacteria. Therefore, it can be advocated for clinical therapeutic use.

Metabolic profiling of peri-implant crevicular fluid in peri-implantitis

OBJECTS

This study aims to explore the etiology of peri-implantitis by comparing the metabolic profiles in peri-implant crevicular fluid (PICF) from patients with healthy implants (PH) and those with peri-implantitis (PI).

MATERIALS AND METHODS

Fifty-six patients were enrolled in this cross-sectional study. PICF samples were collected and analyzed using both non-targeted and targeted metabolomics approaches. The relationship between metabolites and clinical indices including probing depth (PD), bleeding on probing (BOP), and marginal bone loss (MBL) was examined. Additionally, submucosal microbiota was collected and analyzed using 16S rRNA gene sequencing to elucidate the association between the metabolites and microbial communities.

RESULTS

Significant differences in metabolic profiles were observed between the PH and PI groups, with 179 distinct metabolites identified. In the PI group, specific amino acids and fatty acids were significantly elevated compared to the PH group. Organic acids including succinic acid, fructose-6-phosphate, and glucose-6-phosphate were markedly higher in the PI group, showing positive correlations with mean PD, BOP, and MBL. Metabolites that increased in the PI group positively correlated with the presence of Porphyromonas and Treponema and negatively with Streptococcus and Haemophilus.

CONCLUSIONS

This study establishes a clear association between metabolic compositions and peri-implant condition, highlighting enhanced metabolite activity in peri-implantitis. These findings open avenues for further research into metabolic mechanisms of peri-implantitis and their potential therapeutic implications.

The Integration of Advanced Drug Delivery Systems into Conventional Adjuvant Therapies for Peri-Implantitis Treatment

Despite the high success rates of dental implants, peri-implantitis is currently the most common complication in dental implantology. Peri-implantitis has an inflammatory nature, it is associated with the accumulation of plaque in the peri-implant tissues, and its evolution can be progressive depending on various factors, comorbidities, and poor oral health. Prophylaxis and different treatment methods have been widely discussed in recent decades, and surgical and non-surgical techniques present both advantages and disadvantages. In this work, a literature review of different studies on the application of adjuvant treatments, such as local and systemic antibiotics and antiseptic treatments, was conducted. Positive outcomes have been found in the short (up to one year after treatment) and long term (up to ten years after treatment) with combined therapies. However, there is still a need to explore new therapies based on the use of advanced drug delivery systems for the effective treatment of peri-implantitis in the long term and without relapses. Hence, micro- and nanoparticles, implants, and injectable hydrogels, among others, should be considered in future peri-implantitis treatment with the aim of enhancing overall therapy outcomes.

A sono-responsive antibacterial nanosystem co-loaded with metformin and bone morphogenetic protein-2 for mitigation of inflammation and bone loss in experimental peri-implantitis

Background

Dental implants have become an increasingly popular option for replacing missing teeth, and the prevalence of peri-implantitis has also increased, which is expected to become a public health problem worldwide and cause high economic and health burdens. This scenario highlights the need for new therapeutic options to treat peri-implantitis.

Methods

In this study, we proposed a novel sono-responsive antibacterial nanosystem co-loaded with metformin (Met) and bone morphogenetic protein-2 (BMP-2) to promote efficacy in treating peri-implantitis. We introduced the zeolitic imidazolate framework-8 (ZIF-8) as a carrier for hematoporphyrin monomethyl ether (HMME) to enhance the antibacterial effect of sonodynamic antibacterial therapy and tested its reactive oxygen species (ROS) production efficiency and bactericidal effect in vitro. Afterward, HMME-loaded ZIF-8, BMP-2-loaded polylactic acid-glycolic acid (PLGA), and Met were incorporated into gelatin methacryloyl (GelMA) hydrogels to form HMME@ZIF-8/Met/BMP-2@PLGA/GelMA composite hydrogels, and the biocompatibility of which was determined in vitro and in vivo. A bacterial-induced peri-implantitis model in the maxilla of rats was established to detect the effects of the composite hydrogels with adjunctive use of ultrasound on regulating inflammation and promoting bone tissue repair in vivo.

Results

The results indicated that HMME@ZIF-8 with ultrasound stimulation demonstrated more better ROS production efficiency and antimicrobial efficacy. The composite hydrogels had good biocompatibility. Ultrasound-assisted application of the composite hydrogels reduced the release of the inflammatory factors IL-6 and TNF-α and reduced bone loss around the implant in rats with bacterial-induced peri-implantitis.

Conclusion

Our observations suggest that HMME@ZIF-8 may be a new good sonosensitizer material for sonodynamic antibacterial therapy. The use of HMME@ZIF-8/Met/BMP-2@PLGA/GelMA composite hydrogels in combination with ultrasound can provide a novel option for treating peri-implantitis in the future.

Zinc- and Fluoride-Releasing Bioactive Glass as a Novel Bone Substitute

Bioglass 45S5, a silica-based glass, has pioneered a new field of biomaterials. Bioglass 45S5 promotes mineralization through calcium ion release and is widely used in the dental field, including toothpaste formulations. However, the use of Bioglass 45S5 for bone grafting is limited owing to the induction of inflammation, as well as reduced degradation and ion release. Phosphate-based glasses exhibit higher solubility and ion release than silica-based glass. Given that these glasses can be synthesized at low temperatures (approximately 1,000°C), they can easily be doped with various metal oxides to confer therapeutic properties. Herein, we fabricated zinc- and fluoride-doped phosphate-based glass (multicomponent phosphate [MP] bioactive glass) and further doped aluminum oxide into the MP glass (4% Al-MP glass) to overcome the striking solubility of phosphate-based glass. Increased amounts of zinc and fluoride ions were detected in water containing the MP glass. Doping of aluminum oxide into the MP glass suppressed the striking dissolution in water, with 4% Al-MP glass exhibiting the highest stability in water. Compared with Bioglass 45S5, 4% Al-MP glass in water had a notably reduced particle size, supporting the abundant ion release of 4% Al-MP glass. Compared with Bioglass 45S5, 4% Al-MP glass enhanced the osteogenesis of mouse bone marrow-derived mesenchymal stem cells. Mouse macrophages cultured with 4% Al-MP glass displayed enhanced induction of anti-inflammatory M2 macrophages and reduced proinflammatory M1 macrophages, indicating M2 polarization. Upon implanting 4% Al-MP glass or Bioglass 45S5 in a mouse calvarial defect, 4% Al-MP glass promoted significant bone regeneration when compared with Bioglass 45S5. Hence, we successfully fabricated zinc- and fluoride-releasing bioactive glasses with improved osteogenic and anti-inflammatory properties, which could serve as a promising biomaterial for bone regeneration.

Graphene oxide/ε-poly-L-lysine self-assembled functionalized coatings improve the biocompatibility and antibacterial properties of titanium implants

The construction of an antibacterial biological coating on titanium surface plays an important role in the long-term stability of oral implant restoration. Graphene oxide (GO) has been widely studied because of its excellent antibacterial properties and osteogenic activity. However, striking a balance between its biological toxicity and antibacterial properties remains a significant challenge with GO. ε-poly-L-lysine (PLL) has broad-spectrum antibacterial activity and ultra-high safety performance. Using Layer-by-layer self-assembly technology (LBL), different layers of PLL/GO coatings and GO self-assembly coatings were assembled on the surface of titanium sheet. The materials were characterized using scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and contact angle test. The antibacterial properties of Porphyromonas gingivalis (P.g.) were analyzed through SEM, coated plate experiment, and inhibition zone experiment. CCK-8 was used to determine the cytotoxicity of the material to MC3T3 cells, and zebrafish larvae and embryos were used to determine the developmental toxicity and inflammatory effects of the material. The results show that the combined assembly of 20 layers of GO and PLL exhibits good antibacterial properties and no biological toxicity, suggesting a potential application for a titanium-based implant modification scheme.

Association analysis between CD14 gene polymorphisms and peri-implantitis susceptibility in a Chinese population

OBJECTIVE

The goal of the study was to examine the genetic correlation of cluster of differentiation 14 (CD14) gene polymorphisms with peri-implantitis (PI) predisposition in a Chinese Han population.

METHODS

In the case-control study, blood samples were collected from PI patients and healthy individuals (n = 120/group), who were admitted to the Affiliated Hospital of Yangzhou University from 2021 to 2023. One-way analysis of variance (ANOVA) was applied to compare differences of continuous variables among different groups. Genotype and allele distributions of CD14 gene rs2569190 and rs2915863 polymorphisms were analyzed between groups via χ2 test.

RESULTS

A high percentage of rs2569190 GG genotype or G allele carriers were identified in PI group compared with control group (p < .01). Rs2569190 GG genotype carriers had high risk to develop PI (odds ratio: 2.545, 95% confidence interval: 1.257-5.156, p = .009). The rs2569190 AA genotype carriers had the lowest values of gingival index, plaque index, calculus index, peri-implant pocket depth, and clinical attachment level, which were the highest in cases with GG genotype.

CONCLUSION

Rs2569190 polymorphism of CD14 gene was significantly associated with PI predisposition in the Chinese Han population, and the GG genotype and G allele were risk factors for the development of PI.

Biofouling on titanium implants: a novel formulation of poloxamer and peroxide for in situ removal of pellicle and multi-species oral biofilm

Eradicating biofouling from implant surfaces is essential in treating peri-implant infections, as it directly addresses the microbial source for infection and inflammation around dental implants. This controlled laboratory study examines the effectiveness of the four commercially available debridement solutions '(EDTA (Prefgel®), NaOCl (Perisolv®), H2O2 (Sigma-Aldrich) and Chlorhexidine (GUM® Paroex®))' in removing the acquired pellicle, preventing pellicle re-formation and removing of a multi-species oral biofilm growing on a titanium implant surface, and compare the results with the effect of a novel formulation of a peroxide-activated 'Poloxamer gel (Nubone® Clean)'. Evaluation of pellicle removal and re-formation was conducted using scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy to assess the surface morphology, elemental composition and chemical surface composition. Hydrophilicity was assessed through contact angle measurements. The multi-species biofilm model included Streptococcus oralis, Fusobacterium nucleatum and Aggregatibacter actinomycetemcomitans, reflecting the natural oral microbiome's complexity. Biofilm biomass was quantified using safranin staining, biofilm viability was evaluated using confocal laser scanning microscopy, and SEM was used for morphological analyses of the biofilm. Results indicated that while no single agent completely eradicated the biofilm, the 'Poloxamer gel' activated with 'H2O2' exhibited promising results. It minimized re-contamination of the pellicle by significantly lowering the contact angle, indicating enhanced hydrophilicity. This combination also showed a notable reduction in carbon contaminants, suggesting the effective removal of organic residues from the titanium surface, in addition to effectively reducing viable bacterial counts. In conclusion, the 'Poloxamer gel + H2O2' combination emerged as a promising chemical decontamination strategy for peri-implant diseases. It underlines the importance of tailoring treatment methods to the unique microbial challenges in peri-implant diseases and the necessity of combining chemical decontaminating strategies with established mechanical cleaning procedures for optimal management of peri-implant diseases.

Indian Society of Periodontology Good Clinical Practice Recommendations for Peri-implant Care

Current implant therapy is a frequently employed treatment for individuals who have lost teeth, as it offers functional and biological advantages over old prostheses. Concurrently, active exploration of intervention strategies aims to prevent the progression of peri-implant diseases and manage the existing peri-implant tissue damage. Indian Society of Periodontology has recognized the need for systematic documents to update the everyday clinical practice of general dental practitioners and has provided evidence-based consensus documents, namely good clinical practice recommendations from time to time to raise the oral health-related awareness and standards of oral health-care delivery across the country. The current clinical practice recommendations focused on peri-implant care to bridge the gap between academic theory and clinical practice by compiling evidence-based suggestions for preventing and treating peri-implant diseases. Twenty-eight subject experts across the country prepared these recommendations after a thorough literature review and group discussions. The document has been prepared in three sections covering peri-implant health and maintenance, peri-implant mucositis, and peri-implantitis. It will be a quick and concise reference for oral implant practitioners in patient management. The guidelines provide distinct definitions, signs, and symptoms, treatment required; recall visit specifications for plausible clinical case situations, and home-care recommendations regarding maintaining peri-implant health. The document advocates combined efforts of oral implant practitioners and the population at large with evidence-based, integrated, and comprehensive peri-implant care. By providing accessible, applicable guidance, these guidelines would empower dental professionals to uphold the well-being of implant patients and ensure the long-term success of implant therapy.

Comparison of Malondialdehyde Levels among Patients with Sandblasted Acid-Etched and Anodized Surface Dental Implants: A Prospective Clinical Study

Inflammation that occur as a part of body's response to implant-tissue contact can result in oxidative stress. Therefore, exploring the oxidative stress around different surface treated dental implants is essential to improve the performance of implants. The purpose of this study was to detect and measure the level of malondialdehyde (MDA), oxidative stress marker among patients with sandblasted acid-etched and anodized surface dental implants. In this prospective clinical study, 78 patients who had undergone implant placement for missing single posterior tooth in mandible using sandblasted acid-etched and anodized surface dental implants during August 2019 - December 2019 were enrolled according to strict inclusion and exclusion criteria and were categorized into Group 1: SLA (n = 27), Group 2: SLActive (n = 26), Group 3: TiUnite (n = 25) based on the surface modification of the implants. Peri-implant crevicular fluid (PICF) was collected and MDA was quantified using ELISA kit at 3 months and 1 year. Statistical analysis was performed using one-way ANOVA, followed by Tukey's HSD post hoc. For intragroup comparison, paired t-test was used. MDA levels in group 3 implants was significantly higher than groups 1 and 2 (P ≤ 0.05). On pairwise comparison, there was a statistically significant difference between the groups at baseline (P ≤ 0.05) and 1-year follow-up (P ≤ 0.05). Intragroup comparison showed that there was a statistically significant difference from baseline in all the three groups (P ≤ 0.05). MDA level in peri-implant crevicular fluid was high around TiUnite dental implant as compared to SLA and SLActive implants.

How Can Imbalance in Oral Microbiota and Immune Response Lead to Dental Implant Problems?

Dental implantology is one of the most dynamically developing fields of dentistry, which, despite developing clinical knowledge and new technologies, is still associated with many complications that may lead to the loss of the implant or the development of the disease, including peri-implantitis. One of the reasons for this condition may be the fact that dental implants cannot yield a proper osseointegration process due to the development of oral microbiota dysbiosis and the accompanying inflammation caused by immunological imbalance. This study aims to present current knowledge as to the impact of oral microflora dysbiosis and deregulation of the immune system on the course of failures observed in dental implantology. Evidence points to a strong correlation between these biological disturbances and implant complications, often stemming from improper osseointegration, pathogenic biofilms on implants, as well as an exacerbated inflammatory response. Technological enhancements in implant design may mitigate pathogen colonization and inflammation, underscoring implant success rates.

Exploring the potential of a newly developed pectin-chitosan polyelectrolyte composite on the surface of commercially pure titanium for dental implants

Pectin and chitosan are natural polysaccharides obtained from fruit peels and exoskeletons of crustaceans and insects. They are safe for usage in food products and are renewable and biocompatible. They have further applications as wound dressings, body fat reduction, tissue engineering, and auxiliary agents in drug delivery systems. The healing process is usually long and painful. Adding a new material such as a pectin-chitosan composite to the implant surface or body would create unique biological responses to accelerate healing and delivery of target-specific medication at the implant site. The present study utilized the electrospraying process to create pectin-chitosan polyelectrolyte composite (PCPC) coatings with various ratios of 1:1, 2:1, 1:2, 1:3, and 3:1 on commercially pure titanium substrates. By means of FESEM, AFM, wettability, cross-cut adhesion, and microhardness were assessed the PCPC coatings' physical and mechanical properties. Subsequently, the antibacterial properties of the coating composite were assessed. AFM analysis revealed higher surface roughness for group 5 and homogenous coating for group 1. Group 3 showed the lowest water contact angle of 66.7° and all PCPC coatings had significantly higher Vickers hardness values compared to the control uncoated CpTi samples. Groups 3 and 4 showed the best adhesion of the PCPC to the titanium substrates. Groups 3, 4, and 5 showed antibacterial properties with a high zone of inhibitions compared to the control. The PCPC coating's characteristics can be significantly impacted by using certain pectin-chitosan ratios. Groups 3 (1:2) and 4 (1:3) showed remarkable morphological and mechanical properties with better surface roughness, greater surface strength, improved hydrophilicity, improved adhesion to the substrate surface, and additionally demonstrated significant antibacterial properties. According to the accomplished in vitro study outcomes, these particular PCPC ratios can be considered as an efficient coating for titanium dental implants.

In-vitro polymicrobial oral biofilm model represents clinical microbial profile and disease progression during implant-related infections

AIM

Clinically relevant in-vitro biofilm models are essential and valuable tools for mechanistically dissecting the etiopathogenesis of infectious diseases and test new antimicrobial therapies. Thus, the aim of this study was to develop and test a clinically relevant in-vitro oral polymicrobial biofilm model that mimics implant-related infections in terms of microbial profile.

METHODS AND RESULTS

For this purpose, 24-well plate system was used to model oral biofilms, using three different microbial inoculums to grow in-vitro biofilms: (1) human saliva from periodontally healthy patients; (2) saliva as in inoculum 1 + Porphyromonas gingivalis strain; and (3) supra and subgingival biofilm collected from peri-implant sites of patients diagnosed with peri-implantitis. Biofilms were grown to represent the dynamic transition from an aerobic to anaerobic community profile. Subsequently, biofilms were collected after each phase and evaluated for microbiological composition, microbial counts, biofilm biomass, structure, and susceptibility to chlorhexidine (CHX). Results showed higher live cell count (P < .05) for biofilms developed from patients' biofilm inoculum, but biomass volume, dry weight, and microbiological composition were similar among groups (P > .05). Interestingly, according to the checkerboard DNA-DNA hybridization results, the biofilm developed from stimulated human saliva exhibited a microbial composition more similar to the clinical subgingival biofilm of patients with peri-implantitis, with proportions of the main pathogens closer to those found in the disease. In addition, biofilm developed using saliva as inoculum was shown to be susceptible to CHX with significant reduction in bacteria compared with biofilms without exposure to CHX (P < .05).

CONCLUSION

The findings suggested that the in-vitro polymicrobial biofilm developed from human saliva as inoculum is a suitable model and clinically relevant tool for mimicking the microbial composition of implant-related infections.

State-of-the-art polyetheretherketone three-dimensional printing and multifunctional modification for dental implants

Polyetheretherketone (PEEK) is a high-performance thermoplastic polymer with an elastic modulus close to that of the jawbone. PEEK has the potential to become a new dental implant material for special patients due to its radiolucency, chemical stability, color similarity to teeth, and low allergy rate. However, the aromatic main chain and lack of surface charge and chemical functional groups make PEEK hydrophobic and biologically inert, which hinders subsequent protein adsorption and osteoblast adhesion and differentiation. This will be detrimental to the deposition and mineralization of apatite on the surface of PEEK and limit its clinical application. Researchers have explored different modification methods to effectively improve the biomechanical, antibacterial, immunomodulatory, angiogenic, antioxidative, osteogenic and anti-osteoclastogenic, and soft tissue adhesion properties. This review comprehensively summarizes the latest research progress in material property advantages, three-dimensional printing synthesis, and functional modification of PEEK in the fields of implant dentistry and provides solutions for existing difficulties. We confirm the broad prospects of PEEK as a dental implant material to promote the clinical conversion of PEEK-based dental implants.

Salivary pellicle modulates biofilm formation on titanium surfaces

OBJECTIVES

The present study aimed to evaluate the potential of the salivary pellicle (SP) formed on titanium (Ti) surfaces to modulate the formation of a biofilm composed of Streptococcus gordonii, Actinomyces naeslundii, Fusobacterium nucleatum, and Porphyromonas gingivalis.

MATERIALS AND METHODS

Ti substrates were incubated for 2 h with a pool of saliva samples obtained from 10 systemically and periodontally healthy subjects. Enamel substrates were included as a biological reference. Scanning electron microscopy (SEM) and Raman spectroscopy analysis were used to analyze the formation of the salivary pellicle. After the SP formation, the surfaces were incubated for 12 h with a mix of Streptococcus gordonii, Actinomyces naeslundii, Fusobacterium nucleatum, and Porphyromonas gingivalis. The number of bacterial cells attached to each surface was determined by the XTT assay while bacterial viability was analyzed by fluorescence microscopy using the LIVE/DEAD® BacLightTM kit.

RESULTS

The SEM and Raman spectroscopy analysis confirmed the presence of a salivary pellicle formed on the tested surfaces. Regarding the biofilm formation, the presence of the SP decreases the number of the bacterial cells detected in the test surfaces, compared with the uncover substrates. Even more, the SP-covered substrates showed similar bacterial counts in both Ti and enamel surfaces, meaning that the physicochemical differences of the substrates were less determinant than the presence of the SP. While on the SP-uncover substrates, differences in the bacterial adhesion patterns were directly related to the physicochemical nature of the substrates.

CONCLUSIONS

The salivary pellicle was the main modulator in the development of the biofilm consisting of representative oral bacteria on the Ti substrates.

CLINICAL RELEVANCE

The results of this study provide valuable information on the modulatory effect of the salivary pellicle on biofilm formation; such information allows us to understand better the events involved in the formation of oral biofilms on Ti dental implants.

SVep1, a temperate phage of human oral commensal Streptococcus vestibularis

Introduction

Bacteriophages play a vital role in the human oral microbiome, yet their precise impact on bacterial physiology and microbial communities remains relatively understudied due to the limited isolation and characterization of oral phages. To address this gap, the current study aimed to isolate and characterize novel oral phages.

Methods

To achieve this, oral bacteria were isolated using a culture-omics method from 30 samples collected from healthy individuals. These bacteria were then cultured in three different types of media under both aerobic and anaerobic conditions. The samples were subsequently subjected to full-length 16S rRNA gene sequencing for analysis. Subsequently, we performed the isolation of lytic and lysogenic phages targeting all these bacteria.

Results

In the initial step, a total of 75 bacterial strains were successfully isolated, representing 30 species and 9 genera. Among these strains, Streptococcus was found to have the highest number of species. Using a full-length 16S rRNA gene similarity threshold of 98.65%, 14 potential novel bacterial species were identified. In the subsequent phase, a temperate phage, which specifically targets the human oral commensal bacterium S. vestibularis strain SVE8, was isolated. The genome of S. vestibularis SVE8 consists of a 1.96-megabase chromosome, along with a 43,492-base pair prophage designated as SVep1. Annotation of SVep1 revealed the presence of 62 open reading frames (ORFs), with the majority of them associated with phage functions. However, it is worth noting that no plaque formation was observed in S. vestibularis SVE8 following lytic induction using mitomycin C. Phage particles were successfully isolated from the supernatant of mitomycin C-treated cultures of S. vestibularis SVE8, and examination using transmission electron microscopy confirmed that SVep1 is a siphovirus. Notably, phylogenetic analysis suggested a common ancestral origin between phage SVep1 and the cos-type phages found in S. thermophilus.

Discussion

The presence of SVep1 may confer immunity to S. vestibularis against infection by related phages and holds potential for being engineered as a genetic tool to regulate oral microbiome homeostasis and oral diseases.

Identification of immunological bioprocesses involved in peri-implantitis using weighted gene co-expression network analysis

BACKGROUND

Peri-implantitis is an irreversible infectious disease that occurs with high incidence. Exploring the immune responses of peri-implantitis is key to developing targeted treatment strategies. However, there is limited research on the immune response of peri-implantitis.

METHODS

This study performed a weighted gene co-expression network analysis to identify the peri-implantitis related gene network and conducted a functional enrichment analysis of the gene network. Thereafter, the candidate hub genes were selected by constructing a protein-protein interaction network and drawing an upset plot. The hub genes were identified through their significant associations with disease condition and validated using quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis. Using the gene set variation analysis, the hub genes were further used to explore infiltrating immunocytes and immune factors in peri-implantitis. Finally, the immunocytes and immune factor related hub genes were intersected to obtain the therapeutic target, which was validated using histological staining.

RESULTS

The peri-implantitis related gene network was enriched in innate and adaptive immune response. Subsequently, interleukin (IL)1B, IL10, ITGAM, ITGB1, STAT3, and TLR4 were identified as hub genes. Plasmacytoid dendritic cells, macrophages, myeloid-derived suppressor cells, natural killer T cells, and immature B cells were positively and significantly related to the hub genes IL1B, TLR4, ITGAM, and ITGB1 (correlation coefficient > 0.80). While immune factors CXCL10, IL6, and CXCL12 and hub genes IL10 and IL1B held the highest degree in the immune factors network. IL1B may be a promising therapeutic target.

CONCLUSION

This study provides new insights into the hub genes, immunocytes, and immune factors underlying peri-implantitis immunological bioprocess.

Bacterial Biofilm Formation on Biomaterials and Approaches to Its Treatment and Prevention

Bacterial biofilms can cause widespread infection. In addition to causing urinary tract infections and pulmonary infections in patients with cystic fibrosis, biofilms can help microorganisms adhere to the surfaces of various medical devices, causing biofilm-associated infections on the surfaces of biomaterials such as venous ducts, joint prostheses, mechanical heart valves, and catheters. Biofilms provide a protective barrier for bacteria and provide resistance to antimicrobial agents, which increases the morbidity and mortality of patients. This review summarizes biofilm formation processes and resistance mechanisms, as well as the main features of clinically persistent infections caused by biofilms. Considering the various infections caused by clinical medical devices, we introduce two main methods to prevent and treat biomaterial-related biofilm infection: antibacterial coatings and the surface modification of biomaterials. Antibacterial coatings depend on the covalent immobilization of antimicrobial agents on the coating surface and drug release to prevent and combat infection, while the surface modification of biomaterials affects the adhesion behavior of cells on the surfaces of implants and the subsequent biofilm formation process by altering the physical and chemical properties of the implant material surface. The advantages of each strategy in terms of their antibacterial effect, biocompatibility, limitations, and application prospects are analyzed, providing ideas and research directions for the development of novel biofilm infection strategies related to therapeutic materials.

Sitagliptin attenuates Porphyromonas gingivalis virulence and inflammatory response in macrophage on titanium

BACKGROUND

In peri-implantitis, Porphyromonas gingivalis and macrophage play important roles. The aim of this study was to detect the attenuating effect of an anti-diabetic drug sitagliptin on Porphyromonas gingivalis virulence and inflammatory response in macrophage on titanium discs.

MATERIALS AND METHODS

Porphyromonas gingivalis and macrophage were cultured on titanium discs. Antibacterial and antibiofilm activities of sitagliptin were assessed and the morphology of Porphyromonas gingivalis was observed by SEM. Bacterial early adhesion, aggregation, hemolysis and Porphyromonas gingivalis virulence factors mRNA expression were assessed to preliminarily investigate the mechanisms of action. Flow cytometry assay, qRT-PCR assay and ELISA were used to assess the anti-inflammatory effect of sitagliptin on Porphyromonas gingivalis lipopolysaccharide-stimulated macrophage.

RESULTS

The present study demonstrated the inhibiting effect of sitagliptin on the growth, biofilm and virulence factors of Porphyromonas gingivalis and the protective effect on the Porphyromonas gingivalis lipopolysaccharide-induced polarization in macrophage. And we also confirmed the anti-inflammatory effect of sitagliptin on the secretion of inflammation-related factors in macrophage.

CONCLUSIONS

Sitagliptin possesses the attenuating effect on Porphyromonas gingivalis virulence and inflammatory response in Porphyromonas gingivalis lipopolysaccharide-stimulated macrophage on titanium.

Docosahexaenoic Acid-Loaded Nanostructured Lipid Carriers for the Treatment of Peri-Implantitis in Rats

Being the most common cause of implant failure, peri-implantitis is defined as a pathological condition associated with the occurrence of peri-implant plaque, characterized by peri-implant mucosal inflammation and progressive loss of the supporting bone tissue attributed to the persistence of pro-inflammatory cytokines. Docosahexaenoic acid (DHA), which is a type of omega-3 polyunsaturated fatty acid, is generally used for the treatment of many inflammatory diseases. However, a suitable form for dosing and its therapeutic effect on peri-implantitis remain unclear. In this study, a novel nanostructured lipid carrier (NLC) loaded with squalene and DHA was fabricated (DHA-loaded NLC). The encapsulation efficiency and drug loading efficiency values of the DHA-loaded NLC were 78.13% ± 1.85% and 28.09% ± 0.48%, respectively. The release of DHA was gradual and steady until 144 h. In addition, the free-radical-scavenging rate of DHA-loaded NLC (0.57 ± 0.03) was much higher than that of sole DHA (0.17 ± 0.003). By inhibiting nuclear factor-κB p65 nuclear translocation, DHA-loaded NLC prevented the activation of nuclear factor-κB downstream inflammatory pathways and exerted anti-inflammatory effects on macrophages. Moreover, DHA-loaded NLC showed better effects on preventing alveolar bone resorption of rat peri-implantitis model than sole DHA. Hence, DHA-loaded NLC enhanced the anti-inflammatory bioavailability of DHA, offering a novel approach for the treatment of peri-implantitis.

The progress in titanium alloys used as biomedical implants: From the view of reactive oxygen species

Titanium and Titanium alloys are widely used as biomedical implants in oral and maxillofacial surgery, due to superior mechanical properties and biocompatibility. In specific clinical populations such as the elderly, diabetics and patients with metabolic diseases, the failure rate of medical metal implants is increased significantly, putting them at increased risk of revision surgery. Many studies show that the content of reactive oxygen species (ROS) in the microenvironment of bone tissue surrounding implant materials is increased in patients undergoing revision surgery. In addition, the size and shape of materials, the morphology, wettability, mechanical properties, and other properties play significant roles in the production of ROS. The accumulated ROS break the original balance of oxidation and anti-oxidation, resulting in host oxidative stress. It may accelerate implant degradation mainly by activating inflammatory cells. Peri-implantitis usually leads to a loss of bone mass around the implant, which tends to affect the long-term stability and longevity of implant. Therefore, a great deal of research is urgently needed to focus on developing antibacterial technologies. The addition of active elements to biomedical titanium and titanium alloys greatly reduce the risk of postoperative infection in patients. Besides, innovative technologies are developing new biomaterials surfaces conferring anti-infective properties that rely on the production of ROS. It can be considered that ROS may act as a messenger substance for the communication between the host and the implanted material, which run through the entire wound repair process and play a role that cannot be ignored. It is necessary to understand the interaction between oxidative stress and materials, the effects of oxidative stress products on osseointegration and implant life as well as ROS-induced bactericidal activity. This helps to facilitate the development of a new generation of well-biocompatible implant materials with ROS responsiveness, and ultimately prolong the lifespan of implants.