How coronal alignment affects distal femoral anatomy: an MRI-based comparison of varus and valgus knees

Surgical epicondylar axis is not orthogonal to the femoral mechanical knee axis in valgus knees with primary osteoarthritis: Three-dimensional analysis according to knee coronal alignment in 112 patients

BACKGROUND

During total knee arthroplasty (TKA), most surgeons align the femoral component along the surgical epicondylar axis (SEA) considering it as orthogonal to the femoral mechanical axis. However, it is still unclear how SEA coronal alignment varies according to the native coronal knee alignment. The main goal of this study was to analyze the SEA orientation according to the native coronal knee morphotype.

METHODS

A total of 112 patients underwent a three-dimensional (3D) -planning-based TKA. The SEA was then determined by locating the epicondyles on 3D models. The 3D femoral and tibial mechanical axes were marked and the femoral (FMA) and tibial (TMA) mechanical angles were measured. The native HKA angle was measured as FMA + TMA. The SEA orientation angles were measured in the coronal (SEA-α) and axial (SEA-β) plane. SEA orientation was compared between the valgus, neutral, and varus knees.

RESULTS

The mean SEA-α angle was 90.2 ± 3° and the mean axial SEA-β angle was 92.2 ± 1.3°. The SEA-α angle was significantly higher in the valgus group compared with the neutral group (92.3 ± 2.9°, 90 ± 2.9°, P = 0.0009) whereas there was no significant difference in the SEA-α angle between the varus and the neutral group (89.7 ± 2.3°, 90 ± 2.9°, P = 0.32).

CONCLUSIONS

In contrast to the neutral and varus knees, the SEA was not orthogonal to the femoral mechanical axis in patients undergoing TKA for primary osteoarthritis. Our results suggest adapting the coronal alignment of the femoral component during TKA, while maintaining an average 2° valgus in valgus knees. By contrast, with varus and neutral knees, our data support the use of a mechanical alignment.

Correlation of short knee and full-length X-rays in evaluating coronal plane alignment in total knee arthroplasty

Background

Coronal alignment after total knee arthroplasty (TKA) would influence the implant survival. Coronal alignment could be measured on short and full-length X-rays. The goal of the current study was to assess the correlation of short and full-length X-rays to accurate prediction of the true Hip-Knee-Ankle alignment after TKA in the Iranian population.

Methods

Lateral distal femoral and medial proximal tibial angles, FTA, HKA, in 180 Iranian patients (243 knees without extra-articular deformities) were measured and compared on short and full-length standing X-rays of primary TKA pre/postoperatively.

Results

The correlation between the preoperative FTA-short and FTA-long, FTA-short and HKA, and FTA-long and HKA values in degrees were fair, good and good (r = 0.64) (r = 0.73), (r = 0.76), respectively. This correlation for postoperative aMPTA and mMPTA (r = 0.73), and FTA-short and HKA (r = 0.76) values were good and significant (P = 0.001). Also, assessing coronal alignment based on short and full-length measurements would result in varying pre/postoperative alignments (varus, neutral and valgus).

Conclusion

Full length X-rays could not be replaced by short knee X-rays to asses true coronal alignment in TKA; considerable portion of our cases were missorted as varus, neutral or valgus based on the FTA versus the HKA. Intraoperative fixed 5° valgus angle cut of distal femur did not result in postoperative favorable neutral alignment in all cases.

Level of evidence

IV.

Analysis of Gender Differences in the Rotational Alignment of the Distal Femur in Kinematically Aligned and Mechanically Aligned Total Knee Arthroplasty

To compare the angle between the external rotation references of the femoral components in the axial plane by gender and lower limb alignment in Korean patients with osteoarthritis (OA). Magnetic resonance (MR) images of 1273 patients were imported into a modeling software and segmented to develop three-dimensional femoral bony and cartilaginous models. The surgical transepicondylar axis (sTEA), posterior condylar axis (PCA), the kinematically aligned axis (KAA), and anteroposterior axis were used as rotational references in the axial plane for mechanically aligned (MA) TKA. The relationship among axes were investigated. Among 1273 patients, 942 were female and 331 were male. According to lower limb alignment, the varus and valgus knee groups comprised 848 and 425 patients, respectively. All measurements, except PCA-sTEA, differed significantly between men and women; all measurements, except PCA-sTEA, did not differ significantly between the varus and valgus knee groups. In elderly Korean patients with OA, rotational alignment of the distal femur showed gender differences, but no differences were seen according to lower limb alignment. The concern for malrotation of femoral components during kinematically aligned TKA is less in Koreans than in Caucasians and relatively less in women than in men. In MA TKA, malrotation of the femoral components can be avoided by setting different rotational alignments for the genders.

Gender-Based Quantitative Analysis of the Grand Piano Sign in Mechanically Aligned Total Knee Arthroplasty in Asians

In mechanically aligned (MA) total knee arthroplasty (TKA), the grand piano sign helps surgeons to further ensure the proper external rotation of the femoral component. The goal of this study was to determine the sex-related differences in the shape of the anterior resection surface using 3D magnetic resonance imaging (MRI) models. MRI scans were performed on 267 consecutive patients (202 women and 65 men) with osteoarthritis who underwent TKA in order to reconstruct a 3D model. Virtual anterior condylar resection was performed based on the surgical transepicondylar axis (sTEA), Whiteside's line (WSL), and flexion-extension axis (FEA). On the anterior resection surface, both lateral length (LatL) and medial length (MedL) were measured, and the ratio between the two (MedL/LatL) was calculated. The mediolateral width of the distal femur (ML) and anterior resection surface (M'L') were measured, and the ratio between the M'L' and ML (M'L'/ML) was calculated. Both the lateral deviation (LD) and the ratio between LD and ML (LD/ML) were also determined. Morphological classification of the anterior resection surface was conducted based on the presence of a definite medial peak. When based on the sTEA or WSL, the MedL/LatL of female subjects was significantly greater than that of male subjects (p < 0.001 and p < 0.05, respectively). The MedL/LatL of the FEA was consistently larger than that obtained using the sTEA or WSL. Among female subjects, the MedL/LatL of the sTEA was significantly greater than that of the WSL, although this was not the case in either the total study population or the male subjects alone. When based on the sTEA, the M'L'/ML was statistically greater in the female subjects (p < 0.01). The LD was greater in the male subjects (p < 0.01), but there was no difference between the male and female subjects when comparing the LD/ML (p = 0.93). The proportion of double- and single-peak types was not significantly different between the sexes (p = 0.196). Surgeons should be aware that the shape of the anterior resection surface may differ depending on the sex of the patient. The results of this study provide more consistent surgical outcomes as well as fundamental anatomical data for designing suitable prostheses applicable to the Korean population.

Coronal and axial alignment relationship in Caucasian patients with osteoarthritis of the knee

Individualized pre-operative assessment of the patterns of the lower extremity anatomy and deformities in patients undergoing total knee arthroplasty seems essential for a successful surgery. In the present study, we investigated the relationship among the coronal alignment and the rotational profile of the lower extremities in the Caucasian population with end-stage knee osteoarthritis. We conducted a prospective study of 385 knees that underwent a pre-operative three-dimensional computed tomography-based model. The lower extremity alignment was determined (mechanical tibiofemoral or hip-knee-ankle angle, supplementary angle of the femoral lateral distal angle, and proximal medial tibial angle). For each case, the femoral distal rotation (condylar twist angle), the femoral proximal version, and the tibial torsion were determined. As the coronal alignment changed from varus to valgus, the femoral external rotation increased (r = 0.217; p < 0.0005). As the coronal alignment changed from varus to valgus, the external tibial torsion increased (r = 0.248; p < 0.0005). No correlation was found between the global coronal alignment and the femoral version. The present study demonstrates a linear relationship between the coronal alignment and the rotational geometry of the distal femur. This correlation also occurs with the tibial torsion. Perhaps outcomes of total knee arthroplasty surgery might be improved by addressing these deformities as well.

Medio-Lateral and Flexion-Extension Gap Imbalances in Mechanically Aligned Total Knee Arthroplasty Using Measured Resection Technique in Korean Patients: 3D Simulation

Background: It is well known that the measured resection (MR) technique in mechanically aligned (MA) total knee arthroplasty (TKA) generates significant gap imbalances, but little is known about whether this applies to the knees of Asian patients. The aim of this study was to evaluate the medio-lateral and flexion-extension gap imbalances and to find the most optimal posterior femoral condyle resection method for operating on the knees of Asian patients. Methods: In total, 738 magnetic resonance imaging (MRI) scans of consecutive patients who underwent TKA were obtained. Four posterior femoral condylar resection methods were used: alignment by the surgical transepicondylar axis (TEA), Whiteside’s line (WSL), 3° external rotation to the posterior condylar axis (PCA), and flexion-extension axis (FEA). Results: For the medial compartments, there were significant differences between the flexion and extension gaps in the varus knee group in all four methods, but there were no differences between the flexion and extension gaps in the valgus knee group. For the lateral compartment, all the methods showed significant differences except for WSL of the valgus knee group and FEA of the varus knee group. Conclusions: In Asian patients, the use of the MA MR technique inevitably leads to medio-lateral or flexion-extension imbalances. Therefore, surgeons should consider which methods can minimize imbalances and choose the best method within the technically possible range.

Distal femoral valgus cut angles unreliable in total knee arthroplasty

We hypothesized that valgus distal femoral cut angle made using a conventional cutting guide would be reproducible in a Sawbone model, regardless of training level. 3°, 5°, or 7° valgus cuts were made on lower extremity Sawbone specimens and were measured with radiographic imaging. 66 patient radiographs were also analyzed to compare pre and post-operative femoral cut angles, and VR12 measurements from each patient were collected. All femoral cuts deviated significantly from target cuts. Also, pre-TKA valgus angles showed no correlation with the angles post-TKA, and final cut angle did not correlate with functional outcomes at 1 year post-surgery.