Using flow technologies to direct the synthesis and assembly of materials in solution

The rise of continuous flow biocatalysis – fundamentals, very recent developments and future perspectives

Very recent developments in the field of biocatalysis in continuously operated systems. Special attention on the future perspectives in this key emerging technological area ranging from process analytical technologies to digitalization.

Experimental Studies of Ethyl Acetate Saponification Using Different Reactor Systems: The Effect of Volume Flow Rate on Reactor Performance and Pressure Drop

Microreactors intensify chemical processes due to improved flow regimes, mass and heat transfer. In the present study, the effect of the volume flow rate on reactor performance in different reactors (the T-shaped reactor, the interdigital microreactor and the chicane microreactor) was investigated. For this purpose, the saponification reaction in these reactor systems was considered. Experimental results were verified using the obtained kinetic model. The reactor system with a T-shaped reactor shows good performance only at high flow rates, while the experimental setups with the interdigital and the chicane microreactors yield good performance throughout the whole range of volume flow rates. However, microreactors exhibit a higher pressure drop, indicating higher mechanical flow energy consumption than seen using a T-shaped reactor.

Ultrafast synthesis of zeolites: breakthrough, progress and perspective

An ultrafast route was established to synthesize industrially important zeolites in several minutes, which represents a breakthrough in the field of zeolite synthesis.

Designs of continuous-flow pharmaceutical crystallizers: developments and practice

This review of recent research advances in continuous-flow crystallization includes a five-step general design procedure, generally applicable process intensification strategies, and practical insights.

Micro Droplet Formation towards Continuous Nanoparticles Synthesis

In this paper, micro droplets are generated in a microfluidic focusing contactor and then they move sequentially in a free-flowing mode (no wall contact). For this purpose, two different micro-flow glass devices (hydrophobic and hydrophilic) were used. During the study, the influence of the flow rate of the water phase and the oil phase on the droplet size and size distribution was investigated. Moreover, the influence of the oil phase viscosity on the droplet size was analyzed. It was found that the size and size distribution of the droplets can be controlled simply by the aqueous phase flow rate. Additionally, 2D simulations to determine the droplet size were performed and compared with the experiment.

Addressing the viscosity challenge: ultrafast, stable-flow synthesis of zeolites with an emulsion method

Combined with a pipe-in-pipe system, the emulsion method can overcome the viscosity challenge, leading to the continuous flow synthesis of zeolites.

Flow Bioreactors as Complementary Tools for Biocatalytic Process Intensification

Biocatalysis has widened its scope and relevance since new molecular tools, including improved expression systems for proteins, protein and metabolic engineering, and rational techniques for immobilization, have become available. However, applications are still sometimes hampered by low productivity and difficulties in scaling up. A practical and reasonable step to improve the performances of biocatalysts (including both enzymes and whole-cell systems) is to use them in flow reactors. This review describes the state of the art on the design and use of biocatalysis in flow reactors. The encouraging successes of this enabling technology are critically discussed, highlighting new opportunities, problems to be solved and technological advances.