Modification and comparison of three Gracilaria spp. agarose with methylation for promotion of its gelling properties

Enhanced mechanical properties and biocompatibility of hydroxyapatite scaffolds by magnesium and titanium oxides for bone tissue applications

Significant attention has been devoted to bioactive implants for bone tissue applications, particularly composite scaffolds based on hydroxyapatite (HaP). This study explores the effects of Magnesium and Titanium oxides on the characteristics of HaP-based composite (HMT) scaffolds. The ceramic nanopowders were synthesized using in situ sol-gel, and then the scaffolds were fabricated by gel-casting technique, followed by heat treatment at 1200 °C. The thermal, microstructural, and structural properties of the samples were investigated by different characterization techniques. It was observed that the formation of the MgTiO3 phase in the composite scaffold was likely the key factor contributing to the improved mechanical properties. Finally, to evaluate bioactivity and biodegradability, scaffolds were immersed in simulated body fluid (SBF) buffer and analyzed by Field Emission Scanning Electron Microscopy (FESEM), and the viability of human fibroblast cells was assessed using the MTT assay. The composite scaffolds containing the MgTiO3 phase showed greater HaP layer formation on the scaffold surface, indicating enhanced biocompatibility.

Micromechanical Indentation Platform for Rapid Analysis of Viscoelastic Biomolecular Hydrogels

The advent of biomedical applications of soft bioinspired materials has entailed an increasing demand for streamlined and expedient characterization methods meant for both research and quality control objectives. Here, a novel measurement system for the characterization of biological hydrogels with volumes as low as 75 µL was developed. The system is based on an indentation platform equipped with micrometer drive actuators that allow the determination of both the fracture points and Young's moduli of relatively stiff polymers, including agarose, as well as the measurements of viscosity for exceptionally soft and viscous hydrogels, such as DNA hydrogels. The sensitivity of the method allows differentiation between DNA hydrogels produced by rolling circle amplification based on different template sequences and synthesis protocols. In addition, the polymerization kinetics of the hydrogels can be determined by time-resolved measurements, and the apparent viscosities of even more complex DNA-based nanocomposites can be measured. The platform presented here thus offers the possibility to characterize a broad variety of soft biomaterials in a targeted, fast, and cost-effective manner, holding promises for applications in fundamental materials science and ensuring reproducibility in the handling of complex materials.

Application of photocrosslinked gelatin, alginate and dextran hydrogels in the in vitro culture of testicular tissue

Testicular tissue culture in vitro is considered an important tool for the study of spermatogenesis and the treatment of male infertility. Although agarose hydrogel is commonly used in testicular tissue culture, the efficiency of spermatogenesis in vitro is limited. In this study, testicular tissues from adult mice were cultured using a gas-liquid interphase method based on agarose (Agarose), gelatin methacryloyl (GelMA), alginate methacryloyl (AlgMA), dextran methacryloyl (DexMA), and mixture GelMA-Agarose, AlgMA-Agarose, and DexMA-Agarose hydrogels, respectively, for 32 days in vitro. The integrity of the seminiferous tubules, the density and proportions of spermatogonia, spermatocytes, Sertoli cells, and testosterone concentrations were quantified and compared between groups. Properties of different hydrogels including compression modulus, Fourier Infrared Spectroscopy (FITR) spectra, pore size, water absorption, and water retention were tested to investigate how biochemical and physical properties of hydrogels affect the results of testicular tissue culture. The results indicate that testicular tissues cultured on AlgMA exhibited the highest seminiferous tubule integrity rate (0.835 ± 0.021), the presence of a high density of spermatocytes (2107.627 ± 232.082/mm2), and a high proportion of SOX9-positive well-preserved seminiferous tubules (0.473 ± 0.047) compared to all remaining experimental groups on day 32. This may be due to the high water content of AlgMA reducing the toxic effect of oxygen on testicular tissue. In the later period of culture, testicular tissues cultured on DexMA, not DexMA-Agarose, produced significantly more testosterone (18.093 ± 3.302 ng/mL) than the other groups, suggesting that DexMA is friendly to Leydig cells. Our study provides a new idea for the optimization of the gas-liquid interphase method for achieving in vitro spermatogenesis, facilitating the future achievement of efficient in vitro spermatogenesis in more species, including humans.

Antimicrobial Activity of Artemisia dracunculus Oil-Loaded Agarose/Poly(Vinyl Alcohol) Hydrogel for Bio-Applications

In this study, the potential use of Artemisia dracunculus essential oil in bio-applications was investigated. Firstly, the phytochemicals from Artemisia dracunculus were analyzed by different methods. Secondly, the Artemisia dracunculus essential oil was incorporated into the hydrogel matrix based on poly(vinyl alcohol) (PVA) and agar (A). The structural, morphological, and physical properties of the hydrogel matrix loaded with different amounts of Artemisia dracunculus essential oil were thoroughly investigated. FTIR analysis revealed the successful loading of the essential oil Artemisia dracunculus into the PVA/A hydrogel matrix. The influence of the mechanical properties and antimicrobial activity of the PVA/A hydrogel matrix loaded with different amounts of Artemisia dracunculus was also assessed. The antimicrobial activity of Artemisia dracunculus (EO Artemisia dracunculus) essential oil was tested using the disk diffusion method and the time-kill assay method after entrapment in the PVA/A hydrogel matrices. The results showed that PVA/agar-based hydrogels loaded with EO Artemisia dracunculus exhibited significant antimicrobial activity (log reduction ratio in the range of 85.5111-100%) against nine pathogenic isolates, both Gram-positive (S. aureus, MRSA, E. faecalis, L. monocytogenes) and Gram-negative (E. coli, K. pneumoniae, S. enteritidis, S. typhimurium, and A. salmonicida). The resulted biocompatible polymers proved to have enhanced properties when functionalized with the essential oil of Artemisia dracunculus, offering opportunities and possibilities for novel applications.

Synthesis, characterization and potential applications for oxidized agarose

The knowledge of agarose (AG) oxidation using periodate as oxidizer has not been systematically explored. This paper synthesized oxidized agarose (OAG) using solid-sate and solution reaction methods; the reaction mechanism and the properties of OAG samples were systematically evaluated. Chemical structure analysis disclosed that the aldehyde group and carboxyl group contents in all OAG samples are extremely low. Meanwhile, crystallinity, dynamic viscosity and molecular weight of OAG samples is lower than that of the original AG. Reaction temperature, time and sodium periodate dosage are inversely proportional to the decline of the gelling temperature (Tg) and melting temperature (Tm); and the Tg and Tm for the OAG sample obtained are even 19 °C and 22 °C lower than that of the original AG. The as-synthesized OAG samples all possess excellent cytocompatibility and blood compatibility; and can promote the proliferation and migration of fibroblast cells. Last but not least, the gel strength, hardness, cohesiveness, springiness and chewiness of the OAG gel can be effectively regulated via oxidation reaction. In conclusions, both solid and solution oxidation can regulate the physical properties of OAG and enlarge its potential applications in wound dressing, tissue engineering and food areas.

Osmotic Pressure Enables High-Yield Assembly of Giant Vesicles in Solutions of Physiological Ionic Strengths

Giant unilamellar vesicles (GUVs) are micrometer-scale minimal cellular mimics that are useful for bottom-up synthetic biology and drug delivery. Unlike assembly in low-salt solutions, assembly of GUVs in solutions with ionic concentrations of 100-150 mM Na/KCl (salty solutions) is challenging. Chemical compounds deposited on the substrate or incorporated into the lipid mixture could assist in the assembly of GUVs. Here, we investigate quantitatively the effects of temperature and chemical identity of six polymeric compounds and one small molecule compound on the molar yields of GUVs composed of three different lipid mixtures using high-resolution confocal microscopy and large data set image analysis. All the polymers moderately increased the yields of GUVs either at 22 or 37 °C, whereas the small molecule compound was ineffective. Low-gelling temperature agarose is the singular compound that consistently produces yields of GUVs of greater than 10%. We propose a free energy model of budding to explain the effects of polymers in assisting the assembly of GUVs. The osmotic pressure exerted on the membranes by the dissolved polymer balances the increased adhesion between the membranes, thus reducing the free energy for bud formation. Data obtained by modulating the ionic strength and ion valency of the solution shows that the evolution of the yield of GUVs supports our model's prediction. In addition, polymer-specific interactions with the substrate and the lipid mixture affects yields. The uncovered mechanistic insights provide a quantitative experimental and theoretical framework to guide future studies. Additionally, this work shows a facile means for obtaining GUVs in solutions of physiological ionic strengths.

Synthesis of Gentamicin-Immobilized Agar with Improved Antibacterial Activity

To develop agar derivatives with good antibacterial activity and decreased gelling and melting temperatures, two agar–gentamycin conjugates with 9.20% and 12.68% gentamicin immobilized were fabricated by oxidation, Schiff base and reduction reaction, and characterized by a Fourier Transform Infrared Spectrometer, ¹H nuclear magnetic resonance and an elemental analyzer. It was found that the modifications changed the intermolecular interactions, leading to decreased gelling and melting temperatures for the oxidized agar and slightly increased gelling and melting temperatures for agar–gentamycin conjugates. Further studies of antimicrobial properties showed that the two agar–gentamycin conjugates possessed good antibacterial activity, which was positively correlated with the dosage and the immobilization rate of gentamicin. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of agar–gentamycin conjugates with higher immobilization rates of gentamicin against Escherichia coli were 39.1 μg/mL and 156.2 μg/mL, respectively, and the MICs and MBCs against Staphylococcus aureus were 19.5 μg/mL and 78.1 μg/mL, respectively. A biofilm test indicated that certain concentrations of agar–gentamycin conjugate could effectively inhibit the biofilm formation of Escherichia coli and Staphylococcus aureus. In summary, agar–gentamycin conjugates possess good antibacterial activities and may be applied as a new kind of antibacterial material.

Activation of galactose utilization by the addition of glucose for the fermentation of agar hydrolysate using Lactobacillus brevis ATCC 14869

OBJECTIVE

To investigate the application of carbon catabolite repression (CCR) relaxed Lactobacillus brevis ATCC 14869 in the utilization of agar hydrolysate to produce bioethanol and lactic acid through fermentation.

RESULTS

As a single carbon source, galactose was not metabolized by L. brevis. However, L. brevis consumed galactose simultaneous to glucose and ceased cell growth after depletion of glucose. For complete use of galactose from agar hydrolysis, glucose need to be periodically replenished into the growth medium. Overall, L. brevis successfully used agar hydrolysate and produced 17.2 g/L of ethanol and 31.9 g/L of lactic acid. The maximum specific cell growth rate on galactose and glucose mixture was the same with the glucose-only medium at 0.12 h^-1. The molar product yields from glucose for lactic acid and ethanol were 1.02 and 0.95 respectively, equal to values obtained from the simultaneous utilization of glucose and galactose.

CONCLUSION

In contribution to the ongoing efforts to utilize marine biomass, the relaxed CCR in Lactobacillus brevis ATCC 14869 was herein exploited to produce bioethanol and lactic acid from red seaweed hydrolysates.

Hydrogel-Forming Algae Polysaccharides: From Seaweed to Biomedical Applications

With the increasing growth of the algae industry and the development of algae biorefinery, there is a growing need for high-value applications of algae-extracted biopolymers. The utilization of such biopolymers in the biomedical field can be considered as one of the most attractive applications but is challenging to implement. Historically, polysaccharides extracted from seaweed have been used for a long time in biomedical research, for example, agarose gels for electrophoresis and bacterial culture. To overcome the current challenges in polysaccharides and help further the development of high-added-value applications, an overview of the entire polysaccharide journey from seaweed to biomedical applications is needed. This encompasses algae culture, extraction, chemistry, characterization, processing, and an understanding of the interactions of soft matter with living organisms. In this review, we present algae polysaccharides that intrinsically form hydrogels: alginate, carrageenan, ulvan, starch, agarose, porphyran, and (nano)cellulose and classify these by their gelation mechanisms. The focus of this review further lays on the culture and extraction strategies to obtain pure polysaccharides, their structure-properties relationships, the current advances in chemical backbone modifications, and how these modifications can be used to tune the polysaccharide properties. The available techniques to characterize each organization scale of a polysaccharide hydrogel are presented, and the impact on their interactions with biological systems is discussed. Finally, a perspective of the anticipated development of the whole field and how the further utilization of hydrogel-forming polysaccharides extracted from algae can revolutionize the current algae industry are suggested.

Thermoresponsive polysaccharides with tunable thermoresponsive properties via functionalisation with alkylamide groups

Polysaccharides have been used widely in many industries, from food technology and mining to cosmetics and biomedical applications. Over recent years there has been growing interest in the development of responsive polysaccharides with unique and switchable properties, particularly systems that display lower-critical solution temperatures (LCSTs). Therefore, in this study we aimed to investigate a novel strategy that would allow the conversion of non-responsive polysaccharides into thermoresponsive polysaccharides with tuneable LCSTs. Through the functionalisation of dextran with alkylamide groups (isopropyl amide, diethyl amide, piperidinyl and diisobutyl amide) using a carbodiimide coupling approach in conjunction with amic acid derivatives, we prepared a library of novel dextrans with various degrees of substitution (DS), which were characterised via nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The alkylamide-functionalised dextrans were found to have good solubility in aqueous solutions, with the exception of those having a high DS of large hydrophobic substituents. Determination of the thermoresponsive characteristics of the polymer solutions via UV-vis spectroscopy revealed that the LCST of the alkylamide-functionalised dextrans was highly dependent on the type of alkylamide group and the DS and could be tuned over a large range (5-35 °C). Above the LCST, all of the thermoresponsive alkylamide-functionalised dextrans formed colloidal dispersions with particles sizes ranging from 400 -600 nm, as determined by dynamic light scattering (DLS). In addition, the polymers were found to exhibit a fast and reversible phase transition in solution with narrow hysteresis (∼ 1-5 °C). Finally, the injectability and biocompatibility of the novel thermoresponsive dextrans was confirmed in vivo via subcutaneous and intracranial ventricle injections, with no local or systemic toxicity noted over a 14 d period. Overall, the alkylamide-functionalised dextrans display interesting thermoresponsive properties and trends that may make them useful in biomedical applications, such as drug-delivery.

Polymer-Coated Magnetite Nanoparticles for Protein Immobilization

Since their discovery, magnetic nanoparticles (MNPs) have become materials with great potential, especially considering the applications of biomedical sciences. A series of works on the preparation, characterization, and application of MNPs has shown that the biological activity of such materials depends on their size, shape, core, and shell nature. Some of the most commonly used MNPs are those based on a magnetite core. On the other hand, synthetic biopolymers are used as a protective surface coating for these nanoparticles. This review describes the advances in the field of polymer-coated MNPs for protein immobilization over the past decade. General methods of MNP preparation and protein immobilization are presented. The most extensive section of this article discusses the latest work on the use of polymer-coated MNPs for the physical and chemical immobilization of three types of proteins: enzymes, antibodies, and serum proteins. Where possible, the effectiveness of the immobilization and the activity and use of the immobilized protein are reported. Finally, the information available in the peer-reviewed literature and the application perspectives for the MNP-immobilized protein systems are summarized as well.

Agarose, Alginate and Chitosan Nanostructured Aerogels for Pharmaceutical Applications: A Short Review

In this short review, drug delivery systems, formed by polysaccharide-based (i.e., agarose, alginate, and chitosan) aerogels, are analyzed. In particular, the main papers, published in the period 2011-2020 in this research field, have been investigated and critically discussed, in order to highlight strengths and weaknesses of the traditional production techniques (e.g., freeze-drying and air evaporation) of bio-aerogels with respect to supercritical CO₂ assisted drying. Supercritical CO₂ assisted drying demonstrated to be a promising technique to produce nanostructured bio-aerogels that maintain the starting gel volume and shape, when the solvent removal occurs at negligible surface tension. This characteristic, coupled with the possibility of removing also cross-linking agent residues from the aerogels, makes these advanced devices safe and suitable as carriers for controlled drug delivery applications.

Agarose-based biomaterials for advanced drug delivery

Agarose is a prominent marine polysaccharide representing reversible thermogelling behavior, outstanding mechanical properties, high bioactivity, and switchable chemical reactivity for functionalization. As a result, agarose has received particular attention in the fabrication of advanced delivery systems as sophisticated carriers for therapeutic agents. The ever-growing use of agarose-based biomaterials for drug delivery systems resulted in rapid growth in the number of related publications, however still, a long way should be paved to achieve FDA approval for most of the proposed products. This review aims at a classification of agarose-based biomaterials and their derivatives applicable for controlled/targeted drug delivery purposes. Moreover, it attempts to deal with opportunities and challenges associated with the future developments ahead of agarose-based biomaterials in the realm of advanced drug delivery. Undoubtedly, this class of biomaterials needs further advancement, and a lot of critical questions have yet to be answered.

Rheology of partially and totally oxidized red seaweed galactans

Agarose and κ-carrageenan were oxidized using (2,2,6,6-tetramethylpiperidinyl)oxy (TEMPO) in the presence of NaOCl and NaBr. Products with several degrees of oxidation were structurally characterized. The mechanical spectra were determined: derivatives with a medium to high degree of oxidation give rise to polysaccharides that behave like dilute solutions in water, whereas those with a degree of oxidation close to 20 % keep the gelling properties with a different thermo-rheological response towards pH (6.5 or 4.0) and counterions (K⁺ or Ca²⁺) in comparison with the native polysaccharides. For instance, they showed a marked dependence on the presence of calcium ions, observed in the increase of thermal stability and dynamic elastic component (G') value, due to the known interaction of this divalent cation with the carboxylate groups. In this sense, these derivatives with low oxidation degrees have proven to be not only thermosensitive, like the native polysaccharide, but also pH- and calcium-sensitive.

Current Trends on Seaweeds: Looking at Chemical Composition, Phytopharmacology, and Cosmetic Applications

Seaweeds have received huge interest in recent years given their promising potentialities. Their antioxidant, anti-inflammatory, antitumor, hypolipemic, and anticoagulant effects are among the most renowned and studied bioactivities so far, and these effects have been increasingly associated with their content and richness in both primary and secondary metabolites. Although primary metabolites have a pivotal importance such as their content in polysaccharides (fucoidans, agars, carragenans, ulvans, alginates, and laminarin), recent data have shown that the content in some secondary metabolites largely determines the effective bioactive potential of seaweeds. Among these secondary metabolites, phenolic compounds feature prominently. The present review provides the most remarkable insights into seaweed research, specifically addressing its chemical composition, phytopharmacology, and cosmetic applications.

Physiological effects of nitrogen deficiency and recovery on the macroalga Gracilariopsis lemaneiformis (Rhodophyta)

Algal metabolites are the most promising feedstocks for bio-energy production. Gracilariopsis lemaneiformis seems to be a good candidate red alga for polysaccharide production, especially relating to the agar production industry. Nitrogen deficiency is an efficient environmental pressure used to increase the accumulation of metabolites in algae. However, there are no studies on the physiological effects of G. lemaneiformis in response to nitrogen deficiency and its subsequent recovery. Here we integrated physiological data with molecular studies to explore the response strategy of G. lemaneiformis under nitrogen deficiency and recovery. Physiological measurements indicated that amino acids and protein biosynthesis were decreased, while endogenous NH₄⁺ and soluble polysaccharides levels were increased under nitrogen stress. The expression of key genes involved in these pathways further suggested that G. lemaneiformis responded to nitrogen stress through up-regulation or down-regulation of genes related to nitrogen metabolism, and increased levels of endogenous NH₄⁺ to complement the deficiency of exogenous nitrogen. Consistent with the highest accumulation of soluble polysaccharides, the gene encoding UDP-glucose pyrophosphorylase, a molecular marker used to evaluate agar content, was dramatically up-regulated more than 4-fold compared to the relative expression of actin after 4 d of nitrogen recovery. The present data provide important information on the mechanisms of nutrient balance in macroalgae.