Preparation, optimization and swelling study of carboxymethyl sago starch (CMSS)-acid hydrogel

Fabrication of all-starch-based hydrogels as eco-friendly water-absorbent resin: Structure and swelling behaviors

Water-absorbent resin has gained wide applications due to the capability in absorbing and retaining substantial amounts of water, while it's a challenge to fabricate a full biobased water-absorbent resin with excellent biodegradability and eco-friendliness. In this study, starch was sulfonated (SS) and crosslinked with epichlorohydrin to fabricate all-starch-based hydrogels (SSH) as water-absorbent resin with advantages of intrinsic biodegradability and low cost. The results confirmed that the hydrogen atoms of -OH groups in starch chains were partially replaced by -SO3- and the substitution degree (DS) of SS reached 0.008-0.344. By controlling DS and gelation process of SS, the swelling ratio (Qe) of SSH was improved in distilled water, reaching 244.47 g/g for samples prepared using SS with medium DS (SSMDSH). SSMDSH showed relatively loose network structure with low cross-linking density and large pore size. Meanwhile, -SO3- groups on SSMDSH chains facilitated strong ion-dipole interactions with water molecules, resulting in an increase in content of non-freezing bound water within hydrogels and thus improvement in water absorption capacity. Besides, SSH showed desired fertilizer absorption performance and complete biodegradability in α-amylase solution, which made it to be a promising candidate in agricultural fields as eco-friendly water-absorbent resin.

Development and characterization of pH responsive sodium alginate hydrogel containing metal-phenolic network for anthocyanin delivery

Favorable hydrogels can be used as a material to deliver bioactive molecules and improve the stability of bioactive substances, while their safety needs to be improved. In this study, protocatechuic acid (PCA) and Fe3+ were rapidly self-assembled to form a metal-phenolic network under different pH conditions, and then sodium alginate (SA) was added to prepare the SA/PCA/Fe hydrogel without adding other chemical reagents. The structural characteristic of SA/PCA/Fe hydrogel was characterized by infrared spectroscopy, X-ray diffraction analysis and scanning electron microscopy. The results showed that the structures of SA/PCA/Fe hydrogels prepared at different pH values were significantly different. The texture analysis, water-holding measurement and rheological analysis indicated that the SA/PCA/Fe hydrogel showed higher gel strength, water holding capacity and storage modulus. Thermogravimetric analysis illuminated that the SA/PCA/Fe hydrogel enhanced the thermal stability of free anthocyanins through encapsulating anthocyanins. Moreover, in vitro simulated digestion experiment revealed that SA/PCA/Fe hydrogel could control the release of anthocyanins in the simulated gastrointestinal tract. To sum up, this present study might provide a safer and feasible way for the delivery of bioactive substances.

Fir sawdust as a low-cost and easily recyclable adsorbent: efficient removal of Pb(II), Cu(II), and Zn(II) contaminants from wastewater

The main pollution sources of heavy metals are the arbitrary discharge of industrial wastewater and waste residues, which cause serious harm to the water environment, soil environment, and human health. In this study, following the principle of waste utilization, a gel adsorbent (AA-SW-AMPS) was prepared by microwave-assisted chemical cross-linking using fir sawdust as raw material. A scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and swelling dynamic experiments were used to investigate the microstructure, reaction mechanism, and water absorption performance of AA-SW-AMPS. The N₂ adsorption-desorption curve shows that the porous structure of AA-SW-AMPS creates 240.75 cm²/g of specific surface area to enable excellent heavy-metal sorption. It was determined by adsorption experiments that the optimal adsorption state was when the dosage of AA-SW-AMPS was 5 g/L, the pH of the solution was 5, the adsorption time was 45 min, and the initial heavy metal ion concentration was 250 mg/L. In addition, the adsorption mechanism was investigated using adsorption dynamics, adsorption isotherm, and Materials Studio simulation. The results show that the maximum adsorption capacities of AA-SW-AMPS for Pb(II), Cu(II), and Zn(II) were 253.49 mg/g, 237.29 mg/g, and 232.15 mg/g, respectively, and the adsorption mechanism is monolayer chemisorption. The adsorbent showed great potential in removing heavy metals from wastewater.

Recent Development of Atmospheric Water Harvesting Materials: A Review

The lack of freshwater has been threatening many people who are living in Africa, the Middle East, and Oceania, while the discovery of freshwater harvesting technology is considered a promising solution. Recent advances in structured surface materials, metal-organic frameworks, hygroscopic inorganic compounds (and derivative materials), and functional hydrogels have demonstrated their potential as platform technologies for atmospheric water (i.e., supersaturated fog and unsaturated water) harvesting due to their cheap price, zero second energy requirement, high water capture capacity, and easy installation and operation compared with traditional water harvesting methods, such as long-distance water transportation, seawater desalination, and electrical dew collection devices in rural areas or individual-scale emergent usage. In this contribution, we highlight recent developments in functional materials for "passive" atmospheric water harvesting application, focusing on the structure-property relationship (SPR) to illustrate the transport mechanism of water capture and release. We also discuss technical challenges in the practical applications of the water harvesting materials, including low adaptability in a harsh environment, low capacity under low humidity, self-desorption, and insufficient solar-thermal conversion. Finally, we provide insightful perspectives on the design and fabrication of atmospheric water harvesting materials.

Preparation and Hydrogelling Performances of a New Drilling Fluid Filtrate Reducer from Plant Press Slag

Plant press slag (PPS) containing abundant cellulose and starch is a byproduct in the deep processing of fruits, cereals, and tuberous crops products. PPS can be modified by using caustic soda and chloroacetic acid to obtain an inexpensive and environmentally friendly filtrate reducer of drilling fluids. The optimum mass ratio of m_NaOH:m_MCA:m_PPS is 1:1:2, the optimum etherification temperature is 75 °C, and the obtained product is a natural mixture of carboxymethyl cellulose and carboxymethyl starch (CMCS). PPS and CMCS are characterized by using X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric, X-ray photoelectron spectroscopy, and elemental analysis. The filtration loss performance of CMCS is stable before and after hot-rolling aging at 120 °C in 4.00% NaCl and saturated NaCl brine base slurry. The minimum filtration loss value of CMCS is 5.28 mL/30 min at the dosage of 1.50%. Compared with the commercial filtrate reducers with a single component, i.e., carboxymethyl starch (CMS) and low viscosity sodium carboxymethyl cellulose (LV-CMC), CMCS have a better tolerance to high temperature of 120 °C and high concentration of NaCl. The filtration loss performance of low-cost CMCS can reach the standards of LV-CMC and CMS of the specification of water-based drilling fluid materials in petroleum industry.

Efficacy study of genotype-matched Newcastle disease virus vaccine formulated in carboxymethyl sago starch acid hydrogel in specific-pathogen-free chickens vaccinated via different administration routes

Background

The commercially available Newcastle disease (ND) vaccines were developed based on Newcastle disease virus (NDV) isolates genetically divergent from field strains that can only prevent clinical disease, not shedding of virulent heterologous virus, highlighting the need to develop genotype-matched vaccines

Objectives

This study examined the efficacy of the NDV genotype-matched vaccine, mIBS025 strain formulated in standard vaccine stabilizer, and in carboxymethyl sago starch-acid hydrogel (CMSS-AH) following vaccination via an eye drop (ED) and drinking water (DW).

Methods

A challenge virus was prepared from a recent NDV isolated from ND vaccinated flock. Groups of specific-pathogen-free chickens were vaccinated with mIBS025 vaccine strain prepared in a standard vaccine stabilizer and CMSS-AH via ED and DW and then challenged with the UPM/NDV/IBS362/2016 strain.

Results

Chickens vaccinated with CMSS-AH mIBS025 ED (group 2) developed the earliest and highest Hemagglutination Inhibition (HI) NDV antibody titer (8log₂) followed by standard mIBS025 ED (group 3) (7log₂) both conferred complete protection and drastically reduced virus shedding. By contrast, chickens vaccinated with standard mIBS025 DW (group 5) and CMSS-AH mIBS025 DW (group 4) developed low HI NDV antibody titers of 4log₂ and 3log₂, respectively, which correspondingly conferred only 50% and 60% protection and continuously shed the virulent virus via the oropharyngeal and cloacal routes until the end of the study at 14 dpc.

Conclusions

The efficacy of mIBS025 vaccines prepared in a standard vaccine stabilizer or CMSS-AH was affected by the vaccination routes. The groups vaccinated via ED had better protective immunity than those vaccinated via DW.

Preparation and Optimization of Water-Soluble Cationic Sago Starch with a High Degree of Substitution Using Response Surface Methodology

Modification and characterizations of cationic sago starch with 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHPTAC) prepared via etherification reaction was reported in this study. The optimization of cationic sago starch modification was performed by utilizing the combination of response surface methodology and central composite design (RSM/CCD). The effect of each variable and the interaction between the three variables, the concentration of CHPTAC, concentration of the catalyst NaOH, and the reaction times on the degree of substitution (DS) of the product were investigated and modeled. Moderate conditions were employed and a water-soluble cationic sago starch with high DS value was obtained. Based on RSM, the highest DS = 1.195 was obtained at optimum conditions: 0.615 mol of CHPTAC concentration (CHPTAC/SS = 5), 30% w/v NaOH, and 5 h reaction time, at 60 °C reaction temperature. Furthermore, the cationic sago starch was characterized using Fourier transform infrared spectroscopy, FTIR, X-ray diffraction, XRD, and field emission scanning electron microscopy, FESEM.

Crosslinked Carboxymethyl Sago Starch/Citric Acid Hydrogel for Sorption of Pb2+, Cu2+, Ni2+ and Zn2+ from Aqueous Solution

In the present study, CMSS (carboxymethyl sago starch)-based hydrogel was synthesized by crosslinking with citric acid via esterification and then applied as a metal sorbent to overcome excessive heavy metal pollution. The CMSS/CA (carboxymethyl sago starch/citric acid) hydrogel was characterized by Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The absorption band at 1726 cm⁻¹ was observed in the FT-IR spectrum of CMSS/CA hydrogel and indicated ester bonds formed. Further findings show that the cross-linkages in the CMSS/CA hydrogel increased the thermal stability of CMSS and various sizes of pores were also shown in the SEM micrograph. Conversely, the removal of heavy metals was analyzed using Inductively Coupled Plasma-Optic Emission Spectra (ICP-OES). The effects of the pH of the metal solution, contact time, initial concentration of the metal ions and temperature on the sorption capacity were investigated. Under optimum condition, the sorption capacity of Pb²⁺, Cu²⁺, Ni²⁺ and Zn²⁺ onto CMSS/CA hydrogel were 64.48, 36.56, 16.21, 18.45 mg/g, respectively. The experiments demonstrated that CMSS/CA hydrogel has high selectivity towards Pb²⁺ in both non-competitive and competitive conditions. In conclusion, the CMSS/CA hydrogel as a natural based heavy metal sorption material exhibited a promising performance, especially in the sorption of Pb²⁺ for wastewater treatment.