Cellulose polymers with β-amino ester pendant group: design, synthesis, molecular docking and application in adsorption of toxic metals from wastewater

Adsorption of Methylene Blue Dye and Analysis of Two Clays: A Study of Kinetics, Thermodynamics, and Modeling with DFT, MD, and MC Simulations

The purpose of this research was to learn more about the primary and secondary properties of Moroccan natural clay in an effort to better investigate innovative adsorbents and gain access to an ideal adsorption system. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis (SEM-EDX) and X-ray fluorescence were employed for identification. SEM revealed clay grains, including tiny particles and unevenly shaped sticks. First- and second-order rate laws, representing two distinct kinetic models, were applied in the kinetic approach. Adsorption of dye MB onto natural clay was studied, and the results agreed with the 2 s order model. The significant correlation coefficients support the inference that the adsorption process was governed by the Langmuir model. Subsequent DFT analyses demonstrated that the methylene blue dye's HOMO and LUMO surfaces are dispersed across most of the dye's components, pointing to a strong interaction with the clay. To determine how the dye might be adsorbed onto the clay, we employed quantum descriptors to locate its most nucleophilic and electrophilic centers. Endothermic reactions are evident during the MB adsorption process on clay, as indicated by the positive values of ΔH0 and ΔS0 (70.49 kJ mol-1of RC and 84.19 kJ mol-1 of OC and 10.45 J mol-1 K-1 of RC and 12.68 mol-1 K-1 of OC, respectively). Additionally dye molecules on the adsorbent exhibit a higher order of distribution than in the solution, indicating that the adsorption process is spontaneous.

Porous polyvinyl fluoride coated cellulose beads for efficient removal of Cd(II) from phosphoric acid

In order to enhance the removal of cadmium from phosphoric acid, it is imperative to explore novel resources that may be utilized for the development of highly effective and environmentally sustainable adsorbents. Cellulose beads are composed of naturally occurring polysaccharide fibers and find extensive utilization across several industrial sectors and applications. Within this framework, this research paper presents a green and simple method for producing porous cellulose beads using date palm fibers as the preferred raw material. The innovation lies in immersing the obtained cellulose beads in a Polyvinyl fluoride (PVDF)/N,N-dimethylformamide (DMF) suspension as a coating polymer with different concentrations (2.5, 5, 10 %) to maintain their stability in an acidic environment. The surface of cellulose/PVDF beads were subjected to multiple characterizations like Fourier transform infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), size distribution then pH stability confirming that the coating has been perfectly achieved and conserved well the shape of the beads. The coated cellulose/PVDF-2.5 % underwent evaluation by the process of batch adsorption experiments while different parameters were varied including contact time (5, 10, 20, 30, 60, 90 min), temperature (25, 35, 45 and 55 °C), and adsorbent mass (20, 40, 60, 80 and 100 mg). The obtained ICP data showed that the adsorption rate of Cd (II) from phosphoric acid medium decreased while increasing both temperature from 25 to 55 °C and contact time from 5 to 90 min while adding more adsorbent dosage from 20 to 100 mg enhanced the removal percentage. The cellulose/PVDF-2.5 % was more effective with an adsorption capacity equal to 3.4998 mg/g at optimal conditions including 25 °C as the temperature after 5 min as contact time and by adding a mass 100 mg of the biosorbent while the pH = 2 of the solution is maintained the same. The examined material's adsorption processes proved to be exothermic and non-spontaneous, and it proved that the pseudo-second-order model provided the best match for the cellulose/PVDF-2.5 % beads kinetics data. Furthermore, the cellulose beads exhibited exceptional reusability for up to four repeated cycles without undergoing desorption. The present study offers a viable approach for producing environmentally sustainable biomass-derived adsorbents. Additionally, the study validates the potential of cellulose/PVDF beads as an intriguing material for phosphoric acid decadmiation.

Biopolymers as a Potential Alternative for the Retention of Pollutants from Vinasse: An In Silico Approach

Vinasse, a waste from the bioethanol industry, presents a crucial environmental challenge due to its high organic matter content, which is difficult to biodegrade. Currently, no sustainable alternatives are available for treating the amount of vinasse generated. Conversely, biopolymers such as cellulose, carboxymethylcellulose, and chitosan are emerging as an interesting alternative for vinasse control due to their flocculating capacity against several organic compounds. This study seeks to determine the thermodynamic behavior of in silico interactions among three biopolymers (cellulose, carboxymethylcellulose, and chitosan) regarding 15 organic compounds found in vinasse. For this, the Particle Mesh Ewald (PME) method was used in association with the Verlet cutoff scheme, wherein the Gibbs free energy (ΔG) was calculated over a 50 ns simulation period. The findings revealed that cellulose showed a strong affinity for flavonoids like cyanidin, with a maximum free energy of -84 kJ/mol and a minimum of -55 kJ/mol observed with phenolic acids and other flavonoids. In contrast, chitosan displayed the highest interactions with phenolic acids, such as gallic acid, reaching -590 kJ/mol. However, with 3-methoxy-4-hydroxyphenyl glycol (MHPG), it reached an energy of -70 kJ/mol. The interaction energy for flavonoid ranged from -105 to -96 kJ/mol. Finally, carboxymethylcellulose (CMC) demonstrated an interaction energy with isoquercetin of -238 kJ/mol, while interactions with other flavonoids were almost negligible. Alternatively, CMC exhibited an interaction energy of -124 kJ/mol with MHPG, while it was less favorable with other phenolic acids with minimal interactions. These results suggest that there are favorable interactions for the interfacial sorption of vinasse contaminants onto biopolymers, indicating their potential for use in the removal of contaminants from the effluents of the bioethanol industry.

Synthesis of hydroxyapatite/polyethylene glycol 6000 composites by novel dissolution/precipitation method: optimization of the adsorption process using a factorial design: DFT and molecular dynamic

In this work, we presented a synthesis of a composite based on HAp and PEG 6000 using a new method of synthesis dissolution precipitation to be applied for application of wastewater purification from toxic metal ions. Multiple characterization methods were used to analyze the morphology and the structure of the well-prepared compounds including FT-IR, Raman, XRD, XPS, TGA and SEM were used to conduct a composite analysis. The adsorption effectiveness of this analysis towards Pb2+ and various other hazardous metal ions found in sewage was assessed. Batch experiments were conducted to optimize the various operational parameters including adsorbent dose, temperature, pH, contact time, and initial concentration. The Langmuir isotherm was used to fit the data, and it predicted monolayer adsorption with a maximum capacity of 67 mg g-1 for HAP PEG600 and 60 mg g-1 for HAp. A pseudo-second-order equation fits the adsorption process well (0.961-0.971). The thermodynamic data support the spontaneous metal bonding to the composite receptor sites. Theoretical calculations showed that the interaction strength is very strong and gets stronger when the PEG6000 is deprotonated. The results presented here are supported by evidence acquired from experiments. Theoretical computation using Monte Carlo (MC) and Molecular Dynamic (MD) simulation models showed excellent affinity of prepared foams for the model ion Pb2+ with highly negative adsorption energy values indicating vigorous interactions of Pb2+ with the adsorbate surfaces.

Application of Taguchi method, response surface methodology, DFT calculation and molecular dynamics simulation into the removal of orange G and crystal violet by treated biomass

In this work, the efficiency of the treated plant Carpobrotus edulis (TPCE) as an effective biosorbent for removing the orange G (OG) and crystal violet (CV) dyes from aqueous solution was investigated. TPCE was characterized by FT-IR, Ss, pHz and SEM-EDX. The influence of parameters such as bioadsorbent dose, contact time, initial concentration, temperature and pH was tested using Taguchi experimental design (TED) with L8 orthogonal array (five parameters in two levels). The initial concentration, bioadsorbent dose and contact time are the main parameters for the removal of CV and OG dyes, while the effects of pH and temperature are minimal. The maximum removal efficiency of dyes under optimal operating conditions was 97.93 % and 92.68 %, respectively. which at the optimal conditions of 3 g/L, pH 10, 20 mg/L, 35 °C, 5 min and 15 g/L, pH 4, 20 mg/L, 35 °C, 60 min for CV and OG dyes, respectively. The results of response surface methodology (RSM) and analysis of variance (ANOVA) showed that the initial concentration Ci of CV dye was the most significant factor in the adsorption efficiency with a contribution of 51.56 %. On the other hand, the OG bioadsorbent dose is the most important factor in adsorption efficiency with a percentage contribution of 56.41 %. The Density Functional Tight Binding (DFTB) method shows that dyes strongly bind the adsorbent surface. Monte Carlo and molecular dynamics simulations show significant interactions between dye and adsorbent surface. The reusability of biomaterial indicated that the adsorption performance dropped very slightly up to five cycles.

Removal of cadmium and lead ions from aqueous solutions by novel dolomite-quartz@Fe3O4 nanocomposite fabricated as nanoadsorbent

The elimination of heavy metal ion contaminants from residual waters is critical to protect humans and the environment. The natural clay (dolomite and quartz) based composite Fe₃O₄ nanoparticles (DQ@Fe₃O₄) has been largely explored for this purpose. Experimental variables such as temperature, pH, heavy metal concentration, DQ@Fe₃O₄ dose, and contact time were optimized in details. The DQ@Fe₃O₄ nanocomposite was found to achieve maximum removals of 95.02% for Pb²⁺ and 86.89% for Cd²⁺, at optimal conditions: pH = 8.5, adsorbent dose = 2.8 g L^-1, the temperature = 25 °C, and contact time = 140 min, for 150 mg L^-1 heavy metal ion initial concentration. The Co-precipitation of dolomite-quartz by Fe₃O₄ nanoparticles was evidenced by SEM-EDS, TEM, AFM, FTIR, XRD, and TGA analyses. Further, the comparison to the theoretical predictions, of the adsorption kinetics, and at the equilibrium, of the composite, revealed that they fit, respectively to, the pseudo-second-order kinetic, and Langmuir isotherm. These both models were found to better describe the metal binding onto the DQ@Fe₃O₄ surface. This suggested a homogenous monolayer sorption dominated by surface complexation. Additionally, thermodynamic data have shown that the adsorption of heavy metal ions is considered a spontaneous and exothermic process. Moreover, Monte Carlo (MC) simulations were performed in order to elucidate the interactions occurring between the heavy metal ions and the DQ@Fe₃O₄ nanocomposite surface. A good correlation was found between the simulated and the experimental data. Moreover, based on the negative values of the adsorption energy (Eads), the adsorption process was confirmed to be spontaneous. In summary, the as-prepared DQ@Fe₃O₄ can be considered a low-cost-effective heavy metals adsorbent, and it has a great potential application for wastewater treatment.

Cellulose based polyurethane with amino acid functionality: Design, synthesis, computational study and application in wastewater purification

Contamination in water is due to various environmental pollutants from natural and anthropogen activities. To remove toxic metals from contaminated water, we developed a novel adsorbent in foam form based on an olive industry waste material. The foam synthesis involved oxidation of cellulose extracted from the waste to dialdehyde, functionalization of the cellulose dialdehyde with an amino acid group, reacting the functionalized cellulose with hexamethylene diisocyanate and p-phenylene diisocyanate to produce the target polyurethanes Cell-F-HMDIC and Cell-F-PDIC, respectively. The optimum condition for lead(II) adsorption by Cell-F-HMDIC and Cell-F-PDIC were determined. The foams show the ability to quantitatively remove most of metal ions present in a real sample of sewage. The kinetic and thermodynamic studies confirmed a spontaneous metal ion binding to the foams with a second pseudo-order adsorption rate. The adsorption study revealed it obeys the Langmuir isotherm model. The experimental Qe values of both foams Cell-F-PDIC and Cell-F-HMDIC were 2.1929 and 2.0345 mg/g, respectively. Monte Carlo (MC) and Dynamic (MD) and simulations showed excellent affinity of both foams for lead ions with high adsorption negative energy value indicating vigorous interactions of Pb(II) with the adsorbent surface. The results indicate the usefulness of the developed foam in commercial applications. ENVIRONMENTAL IMPLICATION: Elimination of metal ions from contaminated environments is important for a number of reasons. They are toxic to humans via interaction with biomolecules, resulting in disruption of the metabolism and biological activities of many proteins. They are toxic to plants. Industrial effluents and/or wastewater discharged from production processes, contain a considerable amount of metal ions. In this work, the use of naturally produced materials, such as olive waste biomass, as adsorbents for environmental remediation has received great attention. This biomass represents unused resources and presents serious disposal problems. We demonstrated that such materials are capable of selectively adsorbing metal ions.

Multifunctional cobalt oxide nanocomposites for efficient removal of heavy metals from aqueous solutions

In this study, co-precipitation synthesis of natural clay (NC) with Co₃O₄ nanoparticles (NPs) is carried out to elaborate the super NC@Co₃O₄ nanocomposites with admirable salinity confrontation, environmental stability and reusability, to eliminate heavy metal pollution such as toxic Pb(II) and Cd(II) ions. The advantages of using the NC@Co₃O₄ adsorbent are easy synthesis and biocompatibility. In addition, NC@Co₃O₄ can keep an excellent adsorption capacity by taking into account various environmental parameters such as the pH solution, NC@Co₃O₄ dose, adsorption process time and the initial heavy metals concentration. Furthermore, FTIR, XRD, TGA, SEM-EDS, TEM and AFM analyses were performed to confirm NC@Co₃O₄ nanocomposites synthesis and characterisation. The adsorption efficiencies of Pb(II) and Cd(II) ions by NC@Co₃O₄ nanocomposites were demonstrated to be up to 86.89% and 82.06% respectively. Regarding the adsorption from water onto the NC@Co₃O₄ nanocomposites, kinetics data were well fitted with PSO kinetic model, whereas a good agreement was found between the equilibrium adsorption and theoretical Langmuir isotherm model leading to maximum adsorption capacities of 55.24 and 52.91 mg/g, for Pb(II) and Cd(II) respectively. Monte Carlo (MC) simulations confirmed the spontaneous of this adsorption based on the negative values of E_ads. The MC simulations were performed to highlight the interactions occurring between heavy metal ions and the surface of NC@Co₃O₄ nanocomposites, these were well correlated with the experimental results. Overall the study showed that NC@Co₃O₄ nanoadsorbents have strongly versatile applications and are well designed for pollutant removal from wastewater due to their unique adsorptive properties.