Lipid productivity in limnetic Chlorella is doubled by seawater added with anaerobically digested effluent from kitchen waste

Treatment of compound pollution in simulated livestock and poultry wastewater by algae-bacteria symbiosis system

Livestock and poultry breeding wastewater contains a large number of heavy metals and antibiotics; the volume is huge, and it is difficult to treat, which causes serious pollution of the environment. Some studies have shown that symbiotic systems can effectively improve the efficiency of sewage treatment, but there is still a lack of research on the treatment of livestock and poultry wastewater. This experiment not only provides a more in-depth discussion of previous studies, but also demonstrates the feasibility of symbiotic treatment of livestock and poultry wastewater and explores the survival mode and operation mechanism of algal and bacterial symbiosis. The results show that the presence of bacteria greatly promoted the growth of microalgae, with production of 0.50-0.59 g/L biomass and 17.5% lipid content. Lipid levels in the algae from the symbiotic system were 1.3 times higher than for the system of pure algae, which is attributed to the bacteria releasing extracellular substances to promote their own growth and providing small molecules of organic matter and other essential elements which can be used by microalgae. In addition, during the removal of complex pollutants in the symbiotic system we found that the main contributor to the removal of heavy metal ions was the adsorption by Chlorella, while the decomposition of antibiotics mainly originated from bacteria. Furthermore, in the context of this experiment was obtained the highest removal rate of SM2 reached 28.8%, while the removal rate of Cu(II) reached 60.6%-66.7%. The technology of symbiotic treatment of wastewater from livestock and poultry breeding fills a gap and lays a theoretical foundation for the improvement of wastewater treatment.

Application of a microalga, Tetradesmus obliquus PF3, for NO and CO2 removal from actual flue gas via cultivating in wastewater

Greenhouse gas (GHG) emissions, particularly anthropogenic emissions, are the primary drivers of climate change. The cultivation of microalgae represents a highly promising strategy for mitigating atmospheric GHG levels. The growth characteristics and GHG mitigation capabilities of Tetradesmus obliquus PF3 were investigated in domestic wastewater at a thermal power plant. The maximum cell density and productivity were 1.52 ± 0.01 g L-1 and 0.33 ± 0.01 g L-1 day-1, respectively. Utilizing a serial configuration of two reactors, the elimination efficiency of NO and CO2 attained values of 78 ± 4% and 14 ± 4%, respectively. NO concentration at the outlet was less than 24.6 ± 2.9 mg m-3, meeting the latest Chinese discharge limits. Besides, the recovery efficiency of NO and CO2 increased to 77 ± 8% and 2.24 ± 0.04%, respectively, compared to that of the single reactor (40 ± 3%, 0.9 ± 0.0%). A removal efficiency of over 90% was achieved for TN and TP in domestic wastewater. The concentrations of COD (76.5 mg L-1), NH4+-N (0.9 mg L-1), TN(6.31 mg L-1), and TP (0.35 mg L-1) in effluent were below the thresholds of 100 mg L-1, 25 mg L-1, none data, and 3 mg L-1, respectively, complying with the Chinese Discharge Standard (Class II criteria set forth) for Municipal Wastewater Treatment Plants Pollutants. The harvested biomass exhibited a high content of carbohydrates and proteins, making it a viable feedstock for biofuels and bio-fertilizers. Our results demonstrate that Tetradesmus obliquus PF3-based flue gas treatment technology can simultaneously realize GHG removal, wastewater bio-remediation, and biomass recovery.

Improving salt-tolerant artificial consortium of Bacillus amyloliquefaciens for bioconverting food waste to lipopeptides

High-salt content in food waste (FW) affects its resource utilization during biotransformation. In this study, adaptive laboratory evolution (ALE), gene editing, and artificial consortia were performed out to improve the salt-tolerance of Bacillus amyloliquefaciens for producing lipopeptide under FW and seawater. High-salt stress significantly decreased lipopeptide production in the B. amyloliquefaciens HM618 and ALE strains. The total lipopeptide production in the recombinant B. amyloliquefaciens HM-4KSMSO after overexpressing the ion transportor gene ktrA and proline transporter gene opuE and replacing the promoter of gene mrp was 1.34 times higher than that in the strain HM618 in medium containing 30 g/L NaCl. Lipopeptide production under salt-tolerant consortia containing two strains (HM-4KSMSO and Corynebacterium glutamicum) and three-strains (HM-4KSMSO, salt-tolerant C. glutamicum, and Yarrowia lipolytica) was 1.81- and 2.28-fold higher than that under pure culture in a medium containing FW or both FW and seawater, respectively. These findings provide a new strategy for using high-salt FW and seawater to produce value-added chemicals.

Responses of Chlorella vulgaris to the native bacteria in real wastewater: Improvement in wastewater treatment and lipid production

Alga-bacterium interaction can improve wastewater treatment efficiency. To unravel the mystery of the interaction between microalgae and bacteria in wastewater, mono-cultures and co-cultures of Chlorella vulgaris and native bacteria in pretreated biochemical wastewater from landfill leachate were investigated. The results showed that the microalgae selected dominant commensal bacteria, creating a further reduction in species richness for the co-culture, which in turn aids in the dominant commensal bacteria's survival, thereby enhancing algal and bacterial metabolic activity. Strikingly, the lipid productivity of Chlorella in co-culture - namely 41.5 mg/L·d - was 1.4 times higher than in algal monoculture. Additionally, pollutant removal was enhanced in co-cultures, attributed to the bacterial community associated with pollutants' degradation. Furthermore, this study provides an important advance towards observations on the migration and transformation pathways of nutrients and metals, and bridges the gap in algal-bacterial synergistic mechanisms in real wastewater, laying the theoretical foundation for improving wastewater treatment.

Wastewater treatment with algal based membrane bioreactor for the future: Removing emerging containments

The difficulty of developing pollutants in aquatic ecosystems and their potential effects on animals and plants have been raised. Sewage effluent can seriously harm a river's plant and animal life by reducing the water's oxygen content. Due to their increasing use and poor elimination in traditional municipal wastewater treatment plants (WWTPs), pharmaceuticals are one of the developing pollutants that have the potential to penetrate aquatic ecosystems. Due to undigested pharmaceuticals and their metabolites, which constitute a significant class of potentially hazardous aquatic pollutants. Using an algae-based membrane bioreactor (AMBR), the primary objective of this research was to eliminate emerging contaminants (ECs) identified in municipal wastewater. The first part of this research covers the basics of growing algae, an explanation of how they work, and how they remove ECs. Second, it develops the membrane in the wastewater, explains its workings, and uses the membrane to remove ECs. Finally, an algae-based membrane bioreactor for removing ECs is examined. As a result, daily algal production using AMBR technology might range from 50 to 100 mg/Liter. These kinds of machines are capable of nitrogen and phosphorus removal efficiencies of 30-97% and 46-93%, respectively.

The role of microtubules in microalgae: promotion of lipid accumulation and extraction

BACKGROUND

Microtubules in cells are closely related to the growth and metabolism of microalgae. To date, the study of microalgal microtubules has mainly concentrated on revealing the relationship between microtubule depolymerization and synthesis of precursors for flagellar regeneration. While information on the link between microtubule depolymerization and biosynthesis of precursors for complex organic matter (such as lipid, carbohydrate and protein), is still lacking, a better understanding of this could help to achieve a breakthrough in lipid regulation. With the aim of testing the assumption that microtubule disruption could regulate carbon precursors and redirect carbon flow to promote lipid accumulation, Chlorella sorokiniana SDEC-18 was pretreated with different concentrations of oryzalin.

RESULTS

Strikingly, microalgae that were pretreated with 1.5 mM oryzalin accumulated lipid contents of 41.06%, which was attributed to carbon redistribution induced by microtubule destruction. To promote the growth of microalgae, two-stage cultivation involving microtubule destruction was employed, which resulted in the lipid productivity being 1.44 times higher than that for microalgae with routine single-stage cultivation, as well as yielding a desirable biodiesel quality following from increases in monounsaturated fatty acid (MUFA) content. Furthermore, full extraction of lipid was achieved after only a single extraction step, because microtubule destruction caused removal of cellulose synthase and thereby blocked cellulose biosynthesis.

CONCLUSIONS

This study provides an important advance towards observation of microtubules in microalgae through immunocolloidal gold techniques combined with TEM. Moreover, the observation of efficient lipid accumulation and increased cell fragility engendered by microtubule destruction has expanded our knowledge of metabolic regulation by microtubules. Finally, two-stage cultivation involving microtubule destruction has established ideal growth, coupling enhanced lipid accumulation and efficient oil extraction; thus gaining advances in both applied and fundamental research in algal biodiesel production.

Biotechnological Approaches for Biomass and Lipid Production Using Microalgae Chlorella and Its Future Perspectives

Heavy reliance on fossil fuels has been associated with increased climate disasters. As an alternative, microalgae have been proposed as an effective agent for biomass production. Several advantages of microalgae include faster growth, usage of non-arable land, recovery of nutrients from wastewater, efficient CO₂ capture, and high amount of biomolecules that are valuable for humans. Microalgae Chlorella spp. are a large group of eukaryotic, photosynthetic, unicellular microorganisms with high adaptability to environmental variations. Over the past decades, Chlorella has been used for the large-scale production of biomass. In addition, Chlorella has been actively used in various food industries for improving human health because of its antioxidant, antidiabetic, and immunomodulatory functions. However, the major restrictions in microalgal biofuel technology are the cost-consuming cultivation, processing, and lipid extraction processes. Therefore, various trials have been performed to enhance the biomass productivity and the lipid contents of Chlorella cells. This study provides a comprehensive review of lipid enhancement strategies mainly published in the last five years and aimed at regulating carbon sources, nutrients, stresses, and expression of exogenous genes to improve biomass production and lipid synthesis.

Assessing the prospects of Zygnema heydrichii, a filamentous Chlorophyte, as a biodiesel feedstock

This research aimed to investigate the suitability of the filamentous microalga Zygnema heydrichii as a biodiesel feedstock. Under ambient culture conditions, biomass yield, lipid content, and fatty acid composition were measured. The effects of nutrient deprivation, pH, and salinity on biomass and lipid production were also investigated. Z. heydrichii under nutrient-enriched medium showed specific growth rate (µ) 0.31 day^-1 and lipid content 14.75% DW. The most abundant fatty acids were C16:0, C18:1, C18:2 and C18:3, all of which are considered appropriate for biodiesel production. Nitrogen and phosphorus depletion from the growth medium further increased lipid content to 21.45% and 15.35% DW, respectively. The N depletion of the medium remarkably increased TAG content of the culture. Z. heydrichii possess great ability to grow in salty water (40 Mm NaCl). A low-cost, semi-continuous outdoor culture yielded biomass and lipid productivity of 0.208 g day^-1and 0.038 g L^-1 day^-1, respectively.

Microalgae Chlorella vulgaris and Scenedesmus dimorphus co-cultivation with landfill leachate for pollutant removal and lipid production

In this study, landfill leachate was pre-treated with NaClO, and then diluted to 5%, 10% and 15% for microalgae growth of Chlorella vulgaris and Scenedesmus dimorphus in the mono- and co-culture modes to investigate the nutrient removal and growth characteristics of microalgae. The results revealed that landfill leachate with the 10% dilution rate was conducive for microalgae growth and exhibited robust biomass growth and the highest nutrient removal efficiency. The co-culture biomass in 10% landfill leachate achieved 0.266 g/L within 10 days and demonstrated the improved nutrient utilisation efficiency of microalgae. In addition, the chemical oxygen demand, ammonia nitrogen, total nitrate and total phosphorus removal efficiencies accordingly reached 81.0%, 80.1%, 72.1% and 86.0% in 10% landfill leachate. Meanwhile, both the enzyme activity and fluorescence parameters proved that the cell activity of co-culture was higher than that of mono-culture.

Biochemical wastewater from landfill leachate pretreated by microalgae achieving algae's self-reliant cultivation in full wastewater-recycling chain with desirable lipid productivity

Heightened awareness of additional pretreatment for wastewater, has driven studies towards building a full wastewater-recycling chain wherein the wastewater pretreatment is performed by microalgae themselves. We applied biochemical wastewater from landfill leachate with added K₂HPO₄ (BWLL + P) directly to microalgal cultivation. The results showed that the pretreatment provided by the 1st cultivation reduced suspended solids by nearly half, greatly boosting microalgal growth, which thus yielded 1.06 g/L of dry mass and 87.06 mg/L·d of biomass productivity. From the 2nd to the 4th cultivation, lipid accumulation in BWLL + P was 1.12-1.27 times and 1.95-2.36 times higher than in BG11 and BWLL, respectively, mainly attributed to the comfortable environment engendered by the microalgal pretreatment and the organic carbon in the wastewater. Strikingly, the biodiesel production fed with BWLL + P could save 99% of the cost compared with in BG11. In combination, our pioneering full wastewater-recycling chain achieved microalgae's self-reliant cultivation, with wastewater nourishment.

Establishment of a resource recycling strategy by optimizing isobutanol production in engineered cyanobacteria using high salinity stress

BACKGROUND

Isobutanol is an attractive biofuel with many advantages. Third-generation biorefineries that convert CO₂ into bio-based fuels have drawn considerable attention due to their lower feedstock cost and more ecofriendly refining process. Although autotrophic cyanobacteria have been genetically modified for isobutanol biosynthesis, there is a lack of stable and convenient strategies to improve their production.

RESULTS

In this study, we first engineered Synechococcus elongatus for isobutanol biosynthesis by introducing five exogenous enzymes, reaching a production titer of 0.126 g/L at day 20. It was then discovered that high salinity stress could result in a whopping fivefold increase in isobutanol production, with a maximal in-flask titer of 0.637 g/L at day 20. Metabolomics analysis revealed that high salinity stress substantially altered the metabolic profiles of the engineered S. elongatus. A major reason for the enhanced isobutanol production is the acceleration of lipid degradation under high salinity stress, which increases NADH. The NADH then participates in the engineered isobutanol-producing pathway. In addition, increased membrane permeability also contributed to the isobutanol production titer. A cultivation system was subsequently developed by mixing synthetic wastewater with seawater to grow the engineered cyanobacteria, reaching a similar isobutanol production titer as cultivation in the medium.

CONCLUSIONS

High salinity stress on engineered cyanobacteria is a practical and feasible biotechnology to optimize isobutanol production. This biotechnology provides a cost-effective approach to biofuel production, and simultaneously recycles chemical nutrients from wastewater and seawater.

A novel nanoemulsion-based microalgal growth medium for enhanced biomass production

BACKGROUND

Microalgae are well-established feedstocks for applications ranging from biofuels to valuable pigments and therapeutic proteins. However, the low biomass productivity using commercially available growth mediums is a roadblock for its mass production. This work describes a strategy to boost algal biomass productivity by using an effective CO₂ supplement.

RESULTS

In the present study, a novel nanoemulsion-based media has been tested for the growth of freshwater microalgae strain Chlorella pyrenoidosa. Two different nanoemulsion-based media were developed using 1% silicone oil nanoemulsion (1% SE) and 1% paraffin oil nanoemulsion (1% PE) supplemented in Blue-green 11 media (BG11). After 12 days of cultivation, biomass yield was found highest in 1% PE followed by 1% SE and control, i.e., 3.20, 2.75, and 1.03 g L^-1, respectively. The chlorophyll-a synthesis was improved by 76% in 1% SE and 53% in 1% PE compared with control. The respective microalgal cell numbers for 1% PE, 1% SE and control measured using the cell counter were 3.00 × 10⁶, 2.40 × 10⁶, and 1.34 × 10⁶ cells mL^-1. The effective CO₂ absorption tendency of the emulsion was highlighted as the key mechanism for enhanced algal growth and biomass production. On the biochemical characterization of the produced biomass, it was found that the nanoemulsion-cultivated C. pyrenoidosa had increased lipid (1% PE = 26.80%, 1% SE = 23.60%) and carbohydrates (1% PE = 17.20%, 1% SE = 18.90%) content compared to the control (lipid = 18.05%, carbohydrates = 13.60%).

CONCLUSIONS

This study describes a novel nanoemulsion which potentially acts as an effective CO₂ supplement for microalgal growth media thereby increasing the growth of microalgal cells. Further, nanoemulsion-cultivated microalgal biomass depicts an increase in lipid and carbohydrate content. The approach provides high microalgal biomass productivity without altering morphological characteristics like cell shape and size as revealed by field emission scanning electron microscope (FESEM) images.

Inclined algal biofilm photobioreactor (IABPBR) for cost-effective cultivation of lipid-rich microalgae and treatment of seawater-diluted anaerobically digested effluent from kitchen waste with the aid of phytohormones

Previous study has demonstrated that freshwater can be replaced with seawater for dilution of feed to algal production and wastewater treatment, but high harvest cost in suspended-growth systems is still a troublesome limitation for large-scale production. Therefore, a novel inclined algal biofilm photobioreactor (IABPBR) was constructed for algal bioproduct production and treatment of seawater-diluted anaerobically digested effluent (SA) in this study. Fluffy polyester was selected as the best carrier for the algal biofilm among ten discarded materials. With the help of phytohormones, the viability of SDEC-18 was clearly enhanced and an algal biomass productivity of 5.66 g/m²/d was achieved. The SDEC-18 biofilm provided removal capacities of 0.65, 0.25 and 3.31 g/m²/d for TN, TP and COD. Phytohormones clearly enhanced the lipid biosynthesis, with an extraordinary lipid productivity of 3.98 g/m²/d being achieved. Moreover, an automatic harvesting system was designed for the efficient harvesting process during large-scale production.

Treatment of anaerobically digested effluent from kitchen waste using combined processes of anaerobic digestion-complete nitritation-ANAMMOX based on reflux dilution

In this study, an anaerobically digested effluent from kitchen waste with high concentrations of chemical oxygen demand (COD) and ammonia nitrogen was treated using combined processes of anaerobic digestion (AD), complete nitritation (CN), and anaerobic ammonium oxidation (ANAMMOX). The COD and nitrogen removal efficiency of each treatment unit were investigated. The feasibility of using the final treatment effluent to dilute the original wastewater was also discussed. Findings showed that as a pretreatment step, AD resulted in the decline in biodegradability and increase in NH 4 + - N concentration. CN was successfully and stably achieved for 106 days with an average nitritation rate of 95% by maintaining the dissolved oxygen at 2-3 mg/L and hydraulic retention time of 24 hr under 30 ± 1°C. High NH 4 + - N and NO 2 - - N . removal efficiencies of over 88% and 96% were attained in the following ANAMMOX reactor. The reflux of ANAMMOX-treated effluent for the dilution of raw wastewater or an influent of CN and ANAMMOX ensured the stable operation of the combined system. PRACTITIONER POINTS: Anaerobic digestion effluent of kitchen waste had low COD/ NH 4 + - N ratio and poor biodegradability. Stable and efficient nitritation was realized by controlling DO, HRT and TEMP. High NH 4 + - N and NO 2 - -N removal efficiency were obtained by ANAMMOX process. Average nitrogen removal rate of 0.94 kg N/m³ /day were obtained by ANAMMOX. Reflux dilution with the effluent guaranteed the system's successful operation.

Potential of Chlorella vulgaris culture for waste treatment from anaerobic biomass biodigestion at the Piaszczyna (Poland) integrated facility

Many strains of microalgae are potentially useful for industrial purposes. Microalgal biomass and microalgae-derived substances are becoming valuable products with a widening range of applications including biofuels and human food. In this study, the possibility of using the methane waste from biomass biodigestion in the cultivation of Chlorella vulgaris biomass with simultaneous waste treatment was investigated. The methane waste from biomass biodigestion was obtained from a multifunctional facility (Piaszczyna, Poland) producing bioethanol from plant biomass with several steps to reuse the wastes, heat, and carbon dioxide. The growth and biomass yield, as well as photosynthetic performance of C. vulgaris on diluted waste, were similar to the results obtained on the standard mineral medium. The cultivation of C. vulgaris was the waste, treatment step that significantly reduced chemical oxygen demand. The results indicated that the waste contained micro- and macronutrients sufficient to sustain the growth of C. vulgaris cell culture up to 2 g of dry biomass per liter of culture. The results contributed to the development of the waste treatment step in the Piaszczyna facility that allowed for a further decrease in emissions and may lead to development of microalgae biomass-based products in the facility portfolio.

Comprehensive evaluation of a cost-effective method of culturing Chlorella pyrenoidosa with unsterilized piggery wastewater for biofuel production

BACKGROUND

The utilization of Chlorella for the dual goals of biofuel production and wastewater nutrient removal is highly attractive. Moreover, this technology combined with flue gas (rich in CO₂) cleaning is considered to be an effective way of improving biofuel production. However, the sterilization of wastewater is an energy-consuming step. This study aimed to comprehensively evaluate a cost-effective method of culturing Chlorella pyrenoidosa in unsterilized piggery wastewater for biofuel production by sparging air or simulated flue gas, including algal biomass production, lipid production, nutrient removal rate and the mutual effects between algae and other microbes.

RESULTS

The average biomass productivity of C. pyrenoidosa reached 0.11 g L^-1 day^-1/0.15 g L^-1 day^-1 and the average lipid productivity reached 19.3 mg L^-1 day^-1/30.0 mg L^-1 day^-1 when sparging air or simulated flue gas, respectively. This method achieved fairish nutrient removal efficiency with respect to chemical oxygen demand (43.9%/55.1% when sparging air and simulated flue gas, respectively), ammonia (98.7%/100% when sparging air and simulated flue gas, respectively), total nitrogen (38.6%/51.9% when sparging air or simulated flue gas, respectively) and total phosphorus (42.8%/60.5% when sparging air or simulated flue gas, respectively). Culturing C. pyrenoidosa strongly influenced the microbial community in piggery wastewater. In particular, culturing C. pyrenoidosa enriched the abundance of the obligate parasite Vampirovibrionales, which can result in the death of Chlorella.

CONCLUSION

The study provided a comprehensive evaluation of culturing C. pyrenoidosa in unsterilized piggery wastewater for biofuel production. The results indicated that this cost-effective method is feasible but has considerable room for improving. More importantly, this study elucidated the mutual effects between algae and other microbes. In particular, a detrimental effect of the obligate parasite Vampirovibrionales on algal biomass and lipid production was found.

Simultaneous nutrition removal and high-efficiency biomass and lipid accumulation by microalgae using anaerobic digested effluent from cattle manure combined with municipal wastewater

BACKGROUND

Microalgae as a viable biodiesel feedstock show great potential to approach the challenges of energy shortage and environment pollution, but their economic feasibility was seriously hampered by high production cost. Thus, it is in urgent need to reduce the cost of cultivation and improve the biomass and lipid production of microalgae. In this work, anaerobic digestion effluent from cattle manure combined with municipal wastewater was used as a cost-effective medium for cultivating microalgae and expected to obtain high biomass. The pretreatment of anaerobic digested effluent containing dilution rate, sterilization and nutrient optimization was investigated. Then, initial pH and light intensity for algal growth, lipid production and wastewater purification were optimized in this study.

RESULTS

Scenedesmus sp. could grow rapidly in 10% anaerobic digestion effluent from cattle manure combined with secondary sedimentation tank effluent without sterilization. Optimum nutrient additives for higher biomass were as follows: glucose 10 g/L, NaNO₃ 0.3 g/L, K₂HPO₄·3H₂O 0.01 g/L, MgSO₄·7H₂O 0.075 g/L and trace element A5 solution 1 mL/L. Biomass of 4.65 g/L and lipid productivity of 81.90 mg/L/day were achieved during 7-day cultivation accompanying over 90% of COD, NO₃ ^--N, NH₄ ⁺-N, and 79-88% of PO₄ ^3--P removal with optimized initial pH of 7.0 and light intensity of 5000 l×. The FAME profile in ADEC growth medium consisted in saturated (39.48%) and monounsaturated (60.52%) fatty acids with the 16- to 18-chain-length fatty acids constituting over 98% of total FAME.

CONCLUSIONS

This study proves the potential of anaerobic digested effluent combined with municipal wastewater for microalgae culture, and provides an effective avenue for simultaneous microalgal lipid production and treatment of two kinds of wastewater.

Decolorization and degradation analysis of Disperse Red 3B by a consortium of the fungus Aspergillus sp. XJ-2 and the microalgae Chlorella sorokiniana XJK

Disperse Red 3B, an anthraquinone dye, was decolorized by a consortium, which was constituted of the fungus (Aspergillus sp. XJ-2) and the microalgae (Chlorella sorokiniana XJK). The consortium performed better than the single system in terms of decolorization and nutrient removal simultaneously in the simulated wastewater of Dispersed Red 3B. The decolorization rate could reach 98.09% by the consortium under the optimized conditions. The removal rate of COD (Chemical Oxygen Demand), TP (Total Phosphorus), and ammonia nitrogen reached 93.9%, 83.9% and 87.6%. Also, the consortium could tolerate higher salt and dye concentration than the single system did. In this co-cultural system, the lignin peroxidase and manganese peroxidase enzyme activities contributed to the degradation of Disperse Red 3B, which reached 86.7 U L⁻¹ and 122.5 U L⁻¹. The result of fermentation liquid analysis with UV-vis, FTIR and GC-MS showed that the colored functional group of the dye was broken and the Dispersed Red 3B was degraded into small molecular compounds with low toxicity. It was suggested that degradation plays a major role during the color removal process. The consortium exhibited greater potential in terms of color removal and water pollutant removal than the separate system did.

The consortium of fungi and microalgae exhibited simultaneous removal of color, nutrients and COD in simulated wastewater.

An Overview of Current Pretreatment Methods Used to Improve Lipid Extraction from Oleaginous Micro-Organisms

Microbial oils, obtained from oleaginous microorganisms are an emerging source of commercially valuable chemicals ranging from pharmaceuticals to the petroleum industry. In petroleum biorefineries, the microbial biomass has become a sustainable source of renewable biofuels. Biodiesel is mainly produced from oils obtained from oleaginous microorganisms involving various upstream and downstream processes, such as cultivation, harvesting, lipid extraction, and transesterification. Among them, lipid extraction is a crucial step for the process and it represents an important bottleneck for the commercial scale production of biodiesel. Lipids are synthesized in the cellular compartment of oleaginous microorganisms in the form of lipid droplets, so it is necessary to disrupt the cells prior to lipid extraction in order to improve the extraction yields. Various mechanical, chemical and physicochemical pretreatment methods are employed to disintegrate the cellular membrane of oleaginous microorganisms. The objective of the present review article is to evaluate the various pretreatment methods for efficient lipid extraction from the oleaginous cellular biomass available to date, as well as to discuss their advantages and disadvantages, including their effect on the lipid yield. The discussed mechanical pretreatment methods are oil expeller, bead milling, ultrasonication, microwave, high-speed and high-pressure homogenizer, laser, autoclaving, pulsed electric field, and non-mechanical methods, such as enzymatic treatment, including various emerging cell disruption techniques.