Characterization and optimization of endogenous lipid accumulation in Chlorella vulgaris SDEC-3M ability to rapidly accumulate lipid for reversing nightly lipid loss

Biochemical and Antioxidant Characteristics of Chlorococcum oleofaciens (Chlorophyceae, Chlorophyta) under Various Cultivation Conditions

The functional state of enrichment cultures of the Chlorophycean strain Chlorococcum oleofaciens CAMU MZ-Ch4 under various cultivation conditions was studied. Experiments with different aeration conditions, cultivation durations, and nitrogen and phosphorus concentrations in the medium were carried out to evaluate the growth dynamics of the strain and its biochemical characteristics. The contents of chlorophylls, carotenoids, proteins, lipids, retinol, α-tocopherol, ascorbic acid, phenolic compounds, lipid peroxidation products, antioxidant enzymes (glutathione peroxidase, catalase, superoxide dismutase), and succinate dehydrogenase activity were measured. The lipid content on the fully supplemented Bold's basal medium increased to 381.03 mg g-1 dry weight at the late stationary growth phase. This value is 1.3-2.8 times higher than in other experiments. The use of aeration was associated with an increased content of proteins at 283.56 mg g-1 and of carotenoids at 2.12 mg g-1. Also, cultures at the early stationary growth phase with aeration showed the ability to accumulate phenolic compounds and ascorbic acid in amounts up to 0.32 mg g-1 and 0.19 mg g-1. The 74-day-old cultures had the highest contents of retinol (0.16 mg g-1) and α-tocopherol (0.68 mg g-1). Growth in nitrogen- and phosphorus-depleted media increased catalase and superoxide dismutase activity. A comprehensive analysis of all data showed that the antioxidant defence system is stress-resistant and flexible under varying aeration conditions and nitrogen and phosphorus availabilities. Thus, the strain CAMU MZ-Ch4 can be considered a potential producer of lipids, pigments, proteins, and vitamins under various culturing conditions.

Turning food waste to microbial lipid towards a superb economic and environmental sustainability: An innovative integrated biological route

With the drastic growth of the economic and population, the global energy requirement is on the rise, and massive human and material resources have been put into the development of alternative and renewable energy sources. Biodiesel has been recognized as a green and sustainable alternative energy, but the raw materials-associated source and cost makes it difficult to achieve large-scale commercial production. Microbial lipids (ML) produced by oleaginous microbes have attracted more and more topics as feedstocks for biodiesel production because of their unique advantages (fast growth cycle, small footprint and so on). However, there are still many problems and challenges ahead towards commercialization of ML-based biodiesel, especially the cost of feedstock for ML production. Food waste (FW) rich in organic matters and nutrients is an excellent and almost zero-cost feedstock for ML production. However, current biological routes of FW-based ML production have some defects, which make it impossible to achieve full industrialization at present. Therefore, this review intends to provide a critical and comprehensive analysis of current biological routes of FW-based ML production with the focus on the challenges and solutions forward. The biological routes towards future FW-based ML production must be able to concurrently achieve economic feasibility and environmental sustainability. On this condition, an innovative integrated biological route for FW-based ML production has thus been put forward, which is also elucidated on its economic and environmental sustainability. Moreover, the prospective advantages, limitations and challenges for future scale-up of FW-based ML production have also been outlined, together with the perspectives and directions forward.

Convergent community structure of algal-bacterial consortia and its effects on advanced wastewater treatment and biomass production

Microalgal-bacterial consortium is an effective way to meet increasingly stringent standards in wastewater treatment. However, the mechanism of wastewater removal effect has not been properly explained in community structure by phycosphere. And little is known about that the concept of macroecology was introduced into phycosphere to explain the phenomenon. In the study, the algal-bacterial consortia with different ratios of algae and sludge were cultured in same aerobic wastewater within 48 h in photobioreactors (PSBRs). Community structure at start and end was texted by metagenomic analysis. Bray-Curtis similarities analysis based on microbial community showed that there was obvious convergent succession in all consortia, which is well known as "convergence" in macroecology. The result showed that Bray-Curtis similarities at End (overall above 0.88) were higher than these at Start (almost less than 0.66). In terms of community structure, the consortium with 5:1 ratio at Start are the more similar with the consortia at End by which the maximum removal of total dissolved nitrogen (TDN, 73.69%), total dissolved phosphorus (TDP, 94.40%) and NH3-N (93.26%) in wastewater treatment process and biomass production (98.2%) higher than other consortia, according with climax community in macroecology with the highest resource utilization than other communities. Therefore, the macroecology can be introduced into phycosphere to explain the consortium for advanced wastewater treatment and optimization community structure. And the study revealed a novel insight into treatment effect and community structure of algal-bacterial consortia for advanced wastewater treatment, a new idea for to shortening the culture time of consortium and optimize predicting their ecological community structure and predicting ecological community.

Characterization and RNA-seq transcriptomic analysis of a Scenedesmus obliqnus mutant with enhanced photosynthesis efficiency and lipid productivity

Microalgae have received significant attention as potential next-generation microbiologic cell factories for biofuels. However, the production of microalgal biofuels is not yet sufficiently cost-effective for commercial applications. To screen higher lipid-producing strains, heavy carbon ion beams are applied to induce a genetic mutant. An RNA-seq technology is used to identify the pathways and genes of importance related to photosynthesis and biofuel production. The deep elucidation of photosynthesis and the fatty acid metabolism pathway involved in lipid yield is valuable information for further optimization studies. This study provided the photosynthetic efficiency and transcriptome profiling of a unicellular microalgae, Scenedesmus obliqnus mutant SO120G, with enhanced lipid production induced by heavy carbon ion beams. The lipid yield (52.5 mg L⁻¹) of SO120G mutant were enhanced 2.4 fold compared with that of the wild strain under the nitrogen deficient condition. In addition, the biomass and growth rate were 57% and 25% higher, respectively, in SO120G than in the wild type, likely owing to an improved maximum quantum efficiency (F_v/F_m) of photosynthesis. As for the major pigment compositions, the content of chlorophyll a and carotenoids was higher in SO120G than in the wild type. The transcriptome data confirmed that a total of 2077 genes with a change of at least twofold were recognized as differential expression genes (DEGs), of which 1060 genes were up-regulated and 1017 genes were down-regulated. Most of the DEGs involved in lipid biosynthesis were up-regulated with the mutant SO120G. The expression of the gene involved in the fatty acid biosynthesis and photosynthesis of SO120G was upregulated, while that related to starch metabolism decreased compared with that of the wild strain. This work demonstrated that heavy-ion irradiation is an promising strategy for quality improvement. In addition, the mutant SO120G was shown to be a potential algal strain for enhanced lipid production. Transcriptome sequencing and annotation of the mutant suggested the possible genes responsible for lipid biosynthesis and photosynthesis, and identified the putative target genes for future genetic manipulation and biotechnological applications.

Investigating the potential use of an oleaginous bacterium, Rhodococcus opacus PD630, for nano-TiO2 remediation

The occurrence of titanium dioxide nanoparticles (nTiO₂), in the effluents released from wastewater treatment plants, has raised concerns. The fate of nTiO₂ and their potential impact on organisms from different ecosystems are widely investigated. For the first time, in this work, we report the responses of an oleaginous bacteria Rhodococcus opacus PD630, belonging to an ecologically important genus Rhodococcus to environmentally relevant concentrations of nTiO_2, under dark and UV light conditions. We observed a dose-dependent increase in nTiO₂ uptake by the bacteria that reached a maximum of 1.4 mg nTiO₂ (g cell)^-1 under mid-log UV exposure, corresponding to 97% uptake. The nTiO₂ induced oxidative stress in bacteria that increased from 25.1 to a maximum of 100.3, 44.1, and 51.7 μmol ^.OH (g cell)^-1 under dark, continuous, and mid-log UV, respectively. However, nTiO₂ did not affect bacterial viability. Further, due to oxidative stress, the triacylglycerol (biodiesel) content from bacteria increased from 30% to a maximum of 54% CDW. Based on our findings, we propose an application of R. opacus PD 630 in nTiO₂ remediation due to their high nTiO₂ uptake and resistance.

Comparative assessment of pretreatment strategies for production of microalgae-based biodiesel from locally isolated Chlorella homosphaera

The yield and quality of lipids extracted from microalgal biomass are critical factors in the production of microalgae-based biodiesel. The green microalga Chlorella homosphaera, isolated from Beira Lake, Colombo, Sri Lanka was employed in the present study to identify the effect of chlorophyll removal and cell disruption methods on lipid extraction yield, fatty acid methyl ester (FAME) profile and quality parameters of biodiesel; including cetane number (CN), iodine value (IV), degree of unsaturation (DU) and high heating value (HHV). In the first section of this study, chlorophyll was removed from dry microalgae biomass prior to lipid extraction. Through the analysis of FAME profiles, it was observed that chlorophyll removal yielded biodiesel of enhanced quality, albeit with a lipid loss of 44.2% relative to the control. In the second section of the study, mechanical cell disruption strategies including grinding, autoclaving, water bath heating and microwaving were employed to identify the most effective method to improve lipid recovery from chlorophyll-removed microalgae biomass. Autoclaving (121 °C, 20 min sterilization time, total time 2 h) was the most effective cell disruption technique of the methods tested, in terms of lipid extraction yield (39.80%) and also biodiesel quality. Moreover, it was observed that employing cell disruption subsequent to chlorophyll removal has a significant impact on the FAME profile of microalgae-based biodiesel, and consequently served to increase HHV and CN although IV and DU did not vary significantly.