Comparison of methodologies used to determine aromatic lignin unit ratios in lignocellulosic biomass

Exploiting lignin-based nanomaterials for enhanced anticancer therapy: A comprehensive review and future direction

Lignin, a renewable and abundant natural polymer, has emerged as a promising candidate for anticancer therapy due to its unique properties and biocompatibility. This review provides a comprehensive overview of recent advancements in the utilization of lignin-based nanomaterials for enhancing anticancer drug delivery and therapeutic outcomes. A detailed examination of the literature reveals several synthesis methods, including nanoprecipitation, microemulsion, and solvent exchange, which produce lignin nanoparticles with improved drug solubility and bioavailability. The anticancer mechanisms of lignin nanoparticles, such as the generation of reactive oxygen species (ROS), induction of apoptosis, and enhanced cellular uptake, are also explored. Lignin nanoparticles loaded with drugs like curcumin, doxorubicin, camptothecin, and resveratrol have demonstrated the ability to improve drug efficacy, selectively target cancer cells, overcome multidrug resistance, and minimize toxicity in both in vitro and in vivo studies. These nanoparticles have shown significant potential in suppressing tumor growth, inducing cell death through apoptotic pathways, and enhancing the synergistic effects of combination therapies, such as chemo-phototherapy. Future research directions include optimizing lignin nanoparticle formulations for clinical applications, refining targeted delivery mechanisms to cancer cells, and conducting thorough biocompatibility and toxicity assessments. Overall, this review highlights the significant progress made in utilizing lignin-based nanomaterials for cancer therapy and outlines promising areas for further exploration in this rapidly evolving field.

Capability lignin from Acacia crassicarpa black liquor as an environmentally benign antibacterial agent to produce antibacterial and hydrophobic textiles

Recently, the growing health awareness of society on the utilization of fabrics has led to an increasing demand for natural-based antibacterial textiles. Lignin, a generous polyphenol compound in nature, is capable of preventing bacterial growth; in particular, it dwells bacteria closely together on human skin, such as Staphylococcus epidermidis, Bacillus subtilis, Propionibacterium acnes, and Staphylococcus aureus. However, the antibacterial properties of lignin are limited by factors such as the lignin concentration, source, and type of bacteria. This study aimed to evaluate the potency of lignin as an antibacterial agent for textiles. Moreover, the thermal properties and wettability of the textile after lignin coating were also investigated. This study showed that lignin isolation methods significantly contributed to the inhibition of bacterial growth in the clear zone diameter. In addition, the lignin structure, lignin concentration, and type of bacteria had notably different antibacterial effects. SEM images showed that lignin was successfully coated on the fiber, and the antibacterial textile was successfully fabricated with clear zones in the range of 0.1-0.5 cm against four different bacteria. Lignin did not significantly improve the thermal stability of the textile, as proven by the TGA results. After the HDTMS coating by dispersion method, the wettability of the lignin-textile improved to that of the hydrophobic material, with a contact angle greater than 119.05° with excellent antibacterial properties (clear zone of 0.1-0.43 cm).

Quantitative and Structural Characterization of Native Lignin in Hardwood and Softwood Bark via Solid-State NMR Spectroscopy

A major factor limiting bark's industrial use is its greater recalcitrance compared to wood. While lignin is widely recognized as a significant contributor, precise characterization of lignin in bark remains sparse, presenting a crucial gap that impedes understanding of its impact. In this study, we employed advanced solid-state nuclear magnetic resonance (NMR) spectroscopy to analyze bark samples from various species, including willow, poplar, and pine. We established and verified that lignin methoxy peak at 56 ppm serves as a reliable quantitative metric to assess lignin content, with which we calculated the lignin contents in bark are significantly reduced by more than 70% compared to those in wood. Furthermore, in situ characterization revealed significant reduction of β-ether linkage in bark lignin across species, revealing a more condensed and resistant structural configuration. Our results have substantially advanced our comprehension of the composition and structure of native lignin in tree bark.

Atomistic, macromolecular model of the Populus secondary cell wall informed by solid-state NMR

Plant secondary cell walls (SCWs) are composed of a heterogeneous interplay of three major biopolymers: cellulose, hemicelluloses, and lignin. Details regarding specific intermolecular interactions and higher-order architecture of the SCW superstructure remain ambiguous. Here, we use solid-state nuclear magnetic resonance (ssNMR) measurements to infer refined details about the structural configuration, intermolecular interactions, and relative proximity of all three major biopolymers within air-dried Populus wood. To enhance the utility of these findings and enable evaluation of hypotheses in a physics-based environment in silico, the NMR observables are articulated into an atomistic, macromolecular model for biopolymer assemblies within the plant SCW. Through molecular dynamics simulation, we quantitatively evaluate several variations of atomistic models to determine structural details that are corroborated by ssNMR measurements.

Production and characterization of starch-lignin based materials: A review

In their pristine state, starch and lignin are abundant and inexpensive natural polymers frequently considered green alternatives to oil-based and synthetic polymers. Despite their availability and owing to their physicochemical properties; starch and lignin are not often utilized in their pristine forms for high-performance applications. Generally, chemical and physical modifications transform them into starch- and lignin-based materials with broadened properties and functionality. In the last decade, the combination of starch and lignin for producing reinforced materials has gained significant attention. The reinforcing of starch matrices with lignin has received primary focus because of the enhanced water sensitivity, UV protection, and mechanical and thermal resistance that lignin introduces to starch-based materials. This review paper aims to assess starch-lignin materials' production and characterization technologies, highlighting their physicochemical properties, outcomes, challenges, and opportunities. First, this paper describes the current status, sources, and chemical modifications of lignin and starch. Next, the discussion is oriented toward starch-lignin materials and their production approaches, such as blends, composites, plasticized/crosslinked films, and coupled polymers. Special attention is given to the characterization methods of starch-lignin materials, focusing on their advantages, disadvantages, and expected outcomes. Finally, the challenges, opportunities, and future perspectives in developing starch-lignin materials, such as adhesives, coatings, films, and controlled delivery systems, are discussed.

Impact of Extraction Method on the Structure of Lignin from Ball-Milled Hardwood

Understanding the structure of hardwoods can permit better valorization of lignin by enabling the optimization of green, high-yield extraction protocols that preserve the structure of wood biopolymers. To that end, a mild protocol was applied for the extraction of lignin from ball-milled birch. This made it possible to understand the differences in the extractability of lignin in each extraction step. The fractions were extensively characterized using 1D and 2D nuclear magnetic resonance spectroscopy, size exclusion chromatography, and pyrolysis-gas chromatography-mass spectrometry. This comprehensive characterization highlighted that lignin populations extracted by warm water, alkali, and ionic liquid/ethanol diverged in structural features including subunit composition, interunit linkage content, and the abundance of oxidized moieties. Moreover, ether- and ester-type lignin-carbohydrate complexes were identified in the different extracts. Irrespective of whether natively present in the wood or artificially formed during extraction, these complexes play an important role in the extractability of lignin from ball-milled hardwood. Our results contribute to the further improvement of lignin extraction strategies, for both understanding lignin as present in the lignocellulosic matrix and for dedicated lignin valorization efforts.

Extraction and Characterization of Acidolysis Lignin from Turkey Oak (Quercus cerris L.) and Eucalypt (Eucalyptus camaldulensis Dehnh.) Wood from Population Stands in Italy

Acidolysis lignins from the species Quercus cerris L. and Eucalyptus camaldulensis Dehnh. were isolated and characterized using high pressure size exclusion chromatography (HP-SEC), Fourier-transform (FTIR) infrared spectroscopy, analytical pyrolysis-gas chromatography-mass spectrometry (Py-GCMS), and two-dimensional heteronuclear single quantum coherence (2D HSQC) NMR spectroscopy. The acidolysis lignins from the two different species varied in chemical composition and structural characteristics, with Q. cerris L. lignin having a higher S/G ratio and higher molar mass averages with a bimodal molar mass distribution. The different analytical techniques FTIR spectroscopy, Py-GCMS, and 2D NMR spectroscopy provided consistent results regarding the S/G ratio of the lignins from the two wood species. Based on the determined high S/G ratio of both oak and eucalypt lignin, the two wood sources could be promoted as substrates for efficient lignin isolation in modern forest biorefineries in order to develop innovative lignin-based value-added biorefinery products.

Selective Electrochemical Degradation of Lignosulfonate to Bio-Based Aldehydes

A sustainable electrochemical pathway for degradation and thermal treatment of technical lignosulfonate is presented. This approach is an opportunity to produce remarkable quantities of low molecular weight compounds, such as vanillin and acetovanillone. For the electrochemical degradation, a simple two-electrode arrangement in aqueous media is used, which is also easily scalable. The oxidation of the biopolymer occurs at the anode whereas hydrogen is evolved at the cathode. The subsequent thermal treatment supports the degradation of the robust chemical structure of lignosulfonates. With optimized electrolytic conditions, vanillin could be obtained in 9.7 wt% relative to the dry mass of lignosulfonate used. Aside from vanillin, by-products such as acetovanillone or vanillic acid were observed in lower yields. A new and reliable one-pot, two-step degradation of different technically relevant lignosulfonates is established with the advantages of using electrons as an oxidizing agent, which results in low quantities of reagent waste.

Optimizing chemistry at the surface of prodrug-loaded cellulose nanofibrils with MAS-DNP

Studying the surface chemistry of functionalized cellulose nanofibrils at atomic scale is an ongoing challenge, mainly because FT-IR, NMR, XPS and RAMAN spectroscopy are limited in sensitivity or resolution. Herein, we show that dynamic nuclear polarization (DNP) enhanced ¹³C and ¹⁵N solid-state NMR is a uniquely suited technique to optimize the drug loading on nanocellulose using aqueous heterogenous chemistry. We compare the efficiency of two conventional coupling agents (DMTMM vs EDC/NHS) to bind a complex prodrug of ciprofloxacin designed for controlled drug release. Besides quantifying the drug grafting, we also evidence the challenge to control the concurrent prodrug adsorption and to optimize washing procedures. We notably highlight the presence of an unexpected prodrug cleavage mechanism triggered by carboxylates at the surface of the cellulose nanofibrils.

Lignin recovery from cocoa bean shell using microwave-assisted extraction and deep eutectic solvents

Lignin is the second most abundant natural polymer after cellulose, and valorisation of lignin-rich streams has attracted increasing attention recently. This paper presents a novel and sustainable method to recover lignin from Cocoa Bean Shells (CBS) using Deep Eutectic Solvents (DES) and microwaves. A DES containing p-toluenesulfonic acid, choline chloride and glycerol (2:1:1 M ratio) was selected based on its dielectric properties. Under 200 W microwave power, the optimum yield of 95.5 % lignin was achieved at 130 °C and 30 min. DES-extracted lignin exhibited unique structural characteristics including larger particle sizes (242.5 µm D50 size), structural diversity (410.4 µm D90-D10 size) and H/G sub-unit ratio (71.9 %) compared with commercial Kraft lignin (77.2 µm, 157.9 µm and 0.1 % respectively), indicating the potential of DES in the modification and upgrading of lignin for novel value-added products.

Physicochemical properties of lignin nanoparticles from softwood and their potential application in sustainable pre-harvest bagging as transparent UV-shielding films

Technical lignin can be mainly obtained as a waste by-product from pulp industry, and it exhibits unique properties including ultraviolet adsorption, biodegradable, antibacterial, and antioxidant which can be utilized for bioplastic applications. However, common limitations of technical lignin for plastic applications are compatibility mainly due to poor interfacial adhesion, relatively large particle size and impurity. In this study lignin nanoparticles from softwood (S-LNPs) were successfully produced through a continuous-green-scalable antisolvent precipitation and the suitability of S-LNPs for fabrication of bio-composite polybutylene succinate (PBS) films using conventional blown film extrusion was examined. The attained S-LNPs showed lower ash content, higher phenolic content and higher lignin content compared to pristine softwood kraft lignin (S-lignin). Rheological property including shear viscosity and melt-flow index was determined. The obtained PBS/S-LNP composite films showed improved tensile modulus, higher water vapor transmission rate and excellent UV-shielding ability compared to neat PBS and PBS/S-lignin films. Accelerated weathering testing was conducted to replicate outdoor conditions. Degradation indices including carbonyl, vinyl and hydroxyl of the weathered PBS/lignin composites were evaluated for photo-oxidative stability. The S-LNPs as multifunctional bio-additives in biodegradable composite film exhibited superior performances of transparency, UV-absorption and stiffness with high photo-oxidative stability suitable for outdoor applications.

Towards efficient enzymatic saccharification of pretreated lignocellulose: Enzyme inhibition by lignin-derived phenolics and recent trends in mitigation strategies

Lignocellulosic biorefinery based on its sugar-platform has been considered as an efficient strategy to replace fossil fuel-based refinery. In the bioconversion process, pretreatment is an essential step to firstly open up lignocellulose cell wall structure and enhance the accessibility of carbohydrates to hydrolytic enzymes. However, various lignin and/or carbohydrates degradation products (e.g. phenolics, 5-hydroxymethylfurfural, furfural) also generated during pretreatment, which severely inhibit the following enzymatic hydrolysis and the downstream fermentation process. Among them, the lignin derived phenolics have been considered as the most inhibitory compounds and their inhibitory effects are highly dependent on the source of biomass and the type of pretreatment strategy. Although liquid-solid separation and subsequent washing can remove the lignin derived phenolics and other inhibitors, this is undesirable in the realistic industrial application where the whole slurry of pretreated biomass need to be directly used in the hydrolysis process. This review summarizes the phenolics formation mechanism for various commonly applied pretreatment methods and discusses the key factors that affect the inhibitory effect of phenolics on cellulose hydrolysis. In addition, the recent achievements on the rational design of inhibition mitigation strategies to boost cellulose hydrolysis for sugar-platform biorefinery are also introduced. This review also provides guidance for rational design detoxification strategies to facilitate whole slurry hydrolysis which helps to realize the industrialization of lignocellulose biorefinery.

Indirect organogenesis for high frequency shoot regeneration of two cultivars of Sansevieria trifasciata Prain differing in fiber production

Sansevieria trifasciata is used as an indoor plant, in traditional medicine and as a fiber source. Here we characterized fibers of two of varieties of S. trifasciata, Lorentii and Hahnii, and report a protocol for their propagation based on indirect shoot organogenesis. Structural and ribbon fibers were scattered within leaf parenchyma when viewed with confocal laser scanning microscopy. Chemical analysis of the fibers by mass spectrometry and high-performance chromatography revealed higher contents of cellulose and xylose in Lorentii than in Hahnii and significant differences for total lignin between both. A protocol for de novo shoot production was then developed using leaf explants. Time-course histological analyses showed that the first events of transdifferentiation were triggered preferentially in cells surrounding fibers and vascular bundles. Callogenesis and shoot performances were quantified for both varieties, and 2,4-D at 2 and 3 mg·L^-1 yielded the best results for primary calli induction and fresh calli mass. The length, number, and mass of shoots produced did not differ significantly between the two cultivars. The fast morphogenic response of S. trifasciata to in vitro culture may be useful for mass propagation or other biotechnological purposes such as metabolite production.

Solid-State NMR Investigations of Extracellular Matrixes and Cell Walls of Algae, Bacteria, Fungi, and Plants

Extracellular matrixes (ECMs), such as the cell walls and biofilms, are important for supporting cell integrity and function and regulating intercellular communication. These biomaterials are also of significant interest to the production of biofuels and the development of antimicrobial treatment. Solid-state nuclear magnetic resonance (ssNMR) and magic-angle spinning-dynamic nuclear polarization (MAS-DNP) are uniquely powerful for understanding the conformational structure, dynamical characteristics, and supramolecular assemblies of carbohydrates and other biomolecules in ECMs. This review highlights the recent high-resolution investigations of intact ECMs and native cells in many organisms spanning across plants, bacteria, fungi, and algae. We spotlight the structural principles identified in ECMs, discuss the current technical limitation and underexplored biochemical topics, and point out the promising opportunities enabled by the recent advances of the rapidly evolving ssNMR technology.

Durable Modification of Wood by Benzoylation-Proof of Covalent Bonding by Solution State NMR and DOSY NMR Quick-Test

A convenient, broadly applicable and durable wood protection was recently published by Kaufmann and Namyslo. This procedure efficiently allows for esterification of wood hydroxyl groups with (1H-benzotriazolyl)-activated functionalized benzoic acids. The result of such wood-modifying reactions is usually monitored by an increase in mass of the wood material (weight percent gain value, WPG) and by infrared spectroscopy (IR). However, diagnostic IR bands suffer from overlap with naturally occurring ester groups, mainly in the hemicellulose part of unmodified wood. In contrast to known NMR spectroscopy approaches that use the non-commonly available solid state techniques, herein we present solution state NMR proof of the covalent attachment of our organic precursors to wood. The finding is based on a time-efficient, non-uniformly sampled (NUS) solution state 1H,13C-HMBC experiment that only needs a tenth of the regular recording time. The appropriate NMR sample of thoroughly dissolved modified wood was prepared by a mild and non-destructive method. The 2D-HMBC shows a specific cross-signal caused by spin-spin coupling over three bonds from the ester carbonyl carbon atom to the α-protons of the esterified wood hydroxyl groups. This specific coupling pathway requires a covalent bonding as a conditio sine qua non. An even more rapid test to monitor the covalent bonding was achieved with an up-to-date diffusion-ordered spectroscopy sequence (Oneshot-DOSY) based on 1H or 19F as the sensitive nucleus. The control experiment in a series of DOSY spectra gave a by far higher D value of (1.22 ± 0.06)∙10-10 m2∙s-1, which is in accordance with fast diffusion of the "free" and thus rapidly moving small precursor molecule provided as its methyl ester. In the case of a covalent attachment to wood, a significantly smaller D value of (0.12 ± 0.01)∙10-10 m2∙s-1 was obtained.