Application of the ATP assay to rapidly assess cleanliness of spacecraft surfaces: a path to set a standard for future missions

In Situ Real-Time Monitoring for Aseptic Drilling: Lessons Learned from the Atacama Rover Astrobiology Drilling Studies Contamination Control Strategy and Implementation and Application to the Icebreaker Mars Life Detection Mission

In 2019, the Atacama Rover Astrobiology Drilling Studies (ARADS) project field-tested an autonomous rover-mounted robotic drill prototype for a 6-Sol life detection mission to Mars (Icebreaker). ARADS drilled Mars-like materials in the Atacama Desert (Chile), one of the most life-diminished regions on Earth, where mitigating contamination transfer into life-detection instruments becomes critical. Our Contamination Control Strategy and Implementation (CCSI) for the Sample Handling and Transfer System (SHTS) hardware (drill, scoop and funnels) included out-of-simulation protocol testing (out-of-sim) for hardware decontamination and verification during the 6-Sol simulation (in-sim). The most effective five-step decontamination combined safer-to-use sterilants (3%_hydrogen-peroxide-activated 5%_sodium-hypochlorite), and in situ real-time verification by adenosine triphosphate (ATP) and Signs of Life Detector (SOLID) Fluorescence Immunoassay for characterization hardware bioburden and airborne contaminants. The 20- to 40-min protocol enabled a 4-log bioburden reduction down to <0.1 fmoles ATP detection limit (funnels and drill) to 0.2-0.7 fmoles (scoop) of total ATP. The (post-cleaning) hardware background was 0.3 to 1-2 attomoles ATP/cm2 (cleanliness benchmark background values) equivalent to ca. 1-10 colony forming unit (CFU)/cm2. Further, 60-100% of the in-sim hardware background was ≤3-4 bacterial cells/cm2, the threshold limit for Class <7 aseptic operations. Across the six Sols, the flux of airborne contaminants to the drill sites was ∼5 and ∼22 amoles ATP/(cm2·day), accounting for an unexpectedly high Fluorescence Intensity (FI) signal (FI: ∼6000) against aquatic cyanobacteria, but negligible anthropogenic contribution. The SOLID immunoassay also detected microorganisms from multiple habitats across the Atacama Desert (anoxic, alkaline/acidic microenvironments in halite fields, playas, and alluvial fans) in both airborne and post-cleaning hardware background. Finally, the hardware ATP background was 40-250 times lower than the ATP in cores. Similarly, the FI peaks (FImax) against the microbial taxa and molecular biomarkers detected in the post-cleaned hardware (FI: ∼1500-1600) were 5-10 times lower than biomarkers in drilled sediments, excluding significant interference with putative biomarker found in cores. Similar protocols enable the acquisition of contamination-free materials for ultra-sensitive instruments analysis and the integrity of scientific results. Their application can augment our scientific knowledge of the distribution of cryptic life on Mars-like grounds and support life-detection robotic and human-operated missions to Mars.

Field-Based Planetary Protection Operations for Melt Probes: Validation of Clean Access into the Blood Falls, Antarctica, Englacial Ecosystem

Subglacial environments on Earth offer important analogs to Ocean World targets in our solar system. These unique microbial ecosystems remain understudied due to the challenges of access through thick glacial ice (tens to hundreds of meters). Additionally, sub-ice collections must be conducted in a clean manner to ensure sample integrity for downstream microbiological and geochemical analyses. We describe the field-based cleaning of a melt probe that was used to collect brine samples from within a glacier conduit at Blood Falls, Antarctica, for geomicrobiological studies. We used a thermoelectric melting probe called the IceMole that was designed to be minimally invasive in that the logistical requirements in support of drilling operations were small and the probe could be cleaned, even in a remote field setting, so as to minimize potential contamination. In our study, the exterior bioburden on the IceMole was reduced to levels measured in most clean rooms, and below that of the ice surrounding our sampling target. Potential microbial contaminants were identified during the cleaning process; however, very few were detected in the final englacial sample collected with the IceMole and were present in extremely low abundances (∼0.063% of 16S rRNA gene amplicon sequences). This cleaning protocol can help minimize contamination when working in remote field locations, support microbiological sampling of terrestrial subglacial environments using melting probes, and help inform planetary protection challenges for Ocean World analog mission concepts.

Microbial Transport by a Descending Ice Melting Probe: Implications for Subglacial and Ocean World Exploration

Ocean Worlds beneath thick ice covers in our solar system, as well as subglacial lakes on Earth, may harbor biological systems. In both cases, thick ice covers (>100 s of meters) present significant barriers to access. Melt probes are emerging as tools for reaching and sampling these realms due to their small logistical footprint, ability to transport payloads, and ease of cleaning in the field. On Earth, glaciers are immured with various abundances of microorganisms and debris. The potential for bioloads to accumulate around and be dragged by a probe during descent has not previously been investigated. Due to the pristine nature of these environments, minimizing and understanding the risk of forward contamination and considering the potential of melt probes to act as instrument-induced special regions are essential. In this study, we examined the effect that two engineering descent strategies for melt probes have on the dragging of bioloads. We also tested the ability of a field cleaning protocol to rid a common contaminant, Bacillus. These tests were conducted in a synthetic ice block immured with bioloads using the Ice Diver melt probe. Our data suggest minimal dragging of bioloads by melt probes, but conclude that modifications for further minimization and use in special regions should be made.

Planetary Protection Implementation and Verification Approach for the Mars 2020 Mission

The Mars 2020 Flight System comprises a Cruise Stage; Aeroshell; Entry, Descent, and Landing system; Perseverance rover; and the Ingenuity helicopter. The Perseverance rover was successfully delivered to Jezero Crater on February 18, 2021. Among its science objectives, Perseverance is meant to search for rocks that are capable of preserving chemical traces of ancient life, if it existed, and to core and cache rock and regolith samples. The Perseverance rover is gathering samples for potential return to Earth as part of a Mars Sample Return campaign. Thus, controlling the presence of Earth-sourced biological contamination is important to protect the integrity of the scientific results as well as to comply with international treaty and NASA requirements governing Planetary Protection prior to launch. An unprecedented campaign of sampling and environmental monitoring occurred, which resulted in over 16,000 biological samples collected throughout spacecraft assembly. Engineering design, microbial reduction measures, monitoring, and process controls enabled the mission to limit the total spore bioburden to 3.73 × 105 spores, which provided 25.4% margin against the required limit. Furthermore, the total spore bioburden of all landed hardware was 3.86 × 104, which provided 87% margin against the required limit. This manuscript outlines the Planetary Protection implementation approach and verification methodologies applied to the Mars 2020 flight system and its surrounding environments.

Metagenomic Methods for Addressing NASA's Planetary Protection Policy Requirements on Future Missions: A Workshop Report

Molecular biology methods and technologies have advanced substantially over the past decade. These new molecular methods should be incorporated among the standard tools of planetary protection (PP) and could be validated for incorporation by 2026. To address the feasibility of applying modern molecular techniques to such an application, NASA conducted a technology workshop with private industry partners, academics, and government agency stakeholders, along with NASA staff and contractors. The technical discussions and presentations of the Multi-Mission Metagenomics Technology Development Workshop focused on modernizing and supplementing the current PP assays. The goals of the workshop were to assess the state of metagenomics and other advanced molecular techniques in the context of providing a validated framework to supplement the bacterial endospore-based NASA Standard Assay and to identify knowledge and technology gaps. In particular, workshop participants were tasked with discussing metagenomics as a stand-alone technology to provide rapid and comprehensive analysis of total nucleic acids and viable microorganisms on spacecraft surfaces, thereby allowing for the development of tailored and cost-effective microbial reduction plans for each hardware item on a spacecraft. Workshop participants recommended metagenomics approaches as the only data source that can adequately feed into quantitative microbial risk assessment models for evaluating the risk of forward (exploring extraterrestrial planet) and back (Earth harmful biological) contamination. Participants were unanimous that a metagenomics workflow, in tandem with rapid targeted quantitative (digital) PCR, represents a revolutionary advance over existing methods for the assessment of microbial bioburden on spacecraft surfaces. The workshop highlighted low biomass sampling, reagent contamination, and inconsistent bioinformatics data analysis as key areas for technology development. Finally, it was concluded that implementing metagenomics as an additional workflow for addressing concerns of NASA's robotic mission will represent a dramatic improvement in technology advancement for PP and will benefit future missions where mission success is affected by backward and forward contamination.

Microbiome and Metagenome Analyses of a Closed Habitat during Human Occupation

This study provides the first assessment of monitoring cultivable and viable microorganisms on surfaces within a submerged, closed, analog habitat. The results of the analyses presented herein suggest that the surface material plays a role in microbial community structure, as the microbial populations differed between LDP and metal/glass surfaces. The metal/glass surfaces had less-complex community, lower bioburden, and more closely resembled the controls. These results indicated that material choice is crucial when building closed habitats, even if they are simply analogs. Finally, while a few species were associated with previously cultivated isolates from the International Space Station and MIR spacecraft, the majority of the microbial ecology of the submerged analog habitat differs greatly from that of previously studied analog habitats.

Microbial contamination during long-term confinements of space exploration presents potential risks for both crew members and spacecraft life support systems. A novel swab kit was used to sample various surfaces from a submerged, closed, analog habitat to characterize the microbial populations. Samples were collected from various locations across the habitat which were constructed from various surface materials (linoleum, dry wall, particle board, glass, and metal), and microbial populations were examined by culture, quantitative PCR (qPCR), microbiome 16S rRNA gene sequencing, and shotgun metagenomics. Propidium monoazide (PMA)-treated samples identified the viable/intact microbial population of the habitat. The cultivable microbial population ranged from below the detection limit to 10⁶ CFU/sample, and their identity was characterized using Sanger sequencing. Both 16S rRNA amplicon and shotgun sequencing were used to characterize the microbial dynamics, community profiles, and functional attributes (metabolism, virulence, and antimicrobial resistance). The 16S rRNA amplicon sequencing revealed abundance of viable (after PMA treatment) Actinobacteria (Brevibacterium, Nesternkonia, Mycobacterium, Pseudonocardia, and Corynebacterium), Firmicutes (Virgibacillus, Staphylococcus, and Oceanobacillus), and Proteobacteria (especially Acinetobacter) on linoleum, dry wall, and particle board (LDP) surfaces, while members of Firmicutes (Leuconostocaceae) and Proteobacteria (Enterobacteriaceae) were high on the glass/metal surfaces. Nonmetric multidimensional scaling determined from both 16S rRNA and metagenomic analyses revealed differential microbial species on LDP surfaces and glass/metal surfaces. The shotgun metagenomic sequencing of samples after PMA treatment showed bacterial predominance of viable Brevibacterium (53.6%), Brachybacterium (7.8%), Pseudonocardia (9.9%), Mycobacterium (3.7%), and Staphylococcus (2.1%), while fungal analyses revealed Aspergillus and Penicillium dominance.

IMPORTANCE This study provides the first assessment of monitoring cultivable and viable microorganisms on surfaces within a submerged, closed, analog habitat. The results of the analyses presented herein suggest that the surface material plays a role in microbial community structure, as the microbial populations differed between LDP and metal/glass surfaces. The metal/glass surfaces had less-complex community, lower bioburden, and more closely resembled the controls. These results indicated that material choice is crucial when building closed habitats, even if they are simply analogs. Finally, while a few species were associated with previously cultivated isolates from the International Space Station and MIR spacecraft, the majority of the microbial ecology of the submerged analog habitat differs greatly from that of previously studied analog habitats.