Aesthetic outcomes of inframammary fold recreation in two-stage, implant-based, breast reconstruction

The fascial structure of the breast: New findings on the anatomy of the inframammary fold

The inframammary fold defines the shape and structure of the breast, especially in women. As the inframammary fold is placed between the fifth and sixth ribs, the ligaments or fascia are thought to attach from these ribs. However, the previous literature on what structures constitute the inframammary fold does not provide sufficient knowledge for reconstructing the natural form of the fold. This study aimed to clarify the structure that involves the inframammary fold. Ten sides of five formalin-fixed, adult Asian cadaveric breasts were studied. Upon dissection of the breast, including the ribs, the fat lobules were removed while preserving the septal structures under the microscope. The fascial structures were observed grossly and radiographically. A multilayered fascial structure was noted from the dermis near the inframammary fold, anchored to the deep fascia of the pectoralis major muscle mainly at the height of the fourth rib and partially of the fifth rib, from the outside of the nipple to the linea axillaris media, where the fold could be clearly observed. Additionally, the fat lobules around the inframammary fold were subdivided by thin septa closer to the dermis, and they fused posteriorly and upward to form this fascial structure. The inframammary fold was not formed by an adhesion directly under the sixth rib, but by the skin "hanging" from the height of the fourth and fifth ribs due to the multilayered fascial structure that repeatedly fused and dissociated and the changes in the size of the fat lobules. This new anatomical finding may help in inframammary fold reconstruction.

A Simple and Scarless Method for Inframammary Fold Correction Using a Barbed Suture

Background:

In the typical procedure for secondary correction of the inframammary fold (IMF) following breast reconstruction, a large incision is often required, and this increases surgical invasiveness. The “drawstring method” is a simple procedure for recreating a smooth IMF. We modified the drawstring method and developed an essentially scarless method for IMF correction from small stab incisions.

Methods:

Patients at our hospital who presented with IMF ptosis or loss of definition after breast reconstruction and required IMF correction, as well as those who requested IMF recreation for the contralateral breast, during the period spanning May 2016 to June 2019 were considered for this study. We collected and analyzed demographic data, as well as complications and postoperative outcomes.

Results:

The new method was performed on 20 patients, with the following breakdown: IMF recreation after breast reconstruction with a deep inferior epigastric artery perforator flap (11 patients), IMF recreation after breast reconstruction with a breast implant (2 patients), IMF recreation after breast reconstruction with fat graft (5 patients), and IMF recreation for the contralateral breast (2 patients). Overcorrection of the IMF stabilized by 2–3 months postoperatively, resulting in a smooth and well-defined IMF. For non–breast implant cases, the implant volume increased at the lower pole. Slack in the suture was observed in only 2 patients of the deep inferior epigastric artery perforator group and in 1 patient of the breast implant group after 6 months postoperatively.

Conclusions:

Our new method allows for the recreation of an essentially scarless, smooth, and well-defined IMF. IMF definition can be adjusted by altering the depth of the barbed suture. Since this method can be performed under local anesthesia, it offers the benefits of reducing medical costs and physical burden on patients.

Inframammary fold subcutaneous cushion assessment using MRI (magnetic resonance imaging)

Background

The inframammary fold (IMF) is one of the most important elements in the determination of the aesthetic of the female breast. During mastectomies, it is important to preserve the subcutaneous portion nearby the IMF, attempting that, this preservation will greatly facilitate reconstruction allowing more satisfying aesthetic results. The aim of the present study is to evaluate the thickness of the subcutaneous IMF cushion using magnetic resonance imaging (MRI) acquisition images.

Methods

We have gauged the right breast IMF subcutaneous cushion from patients (all the cases without previous surgery in this topography) who were submitted to MRI in a diagnosis radiology center, between January and February of 2017. MRI images were analyzed in T1 fat saturated sequences. The assessment of the fold cushion was realized in the projection of axial measurements in sagittal plane.

Results

Among the 50 evaluated patients, the median measure of breast base was 9.91 cm. The median measure of the subcutaneous IMF cushion assessment in the sagittal projection of the breast base meridian was 2.40 cm (varying from 1.34 to 4.05 cm, with percentile 5% of 1.51 cm and percentile 95% of 3.55 cm).

Conclusions

Other studies indicate the negligible amount of breast tissue and the low incidence of neoplasia in this topography, the preservation of the IMF seems feasible. The measurements of the IMF thickness, evaluated by MRI in this study, provide reference values for maintaining a desirable inframammary crease.

Efficacy of STRATAFIX in Inframammary Fold Recreation in Autologous Breast Reconstruction

Supplemental Digital Content is available in the text.

Breast reconstruction of an unusual configuration using two paranemic implants

Implant-based breast reconstruction can be performed using a choice of various types of breast implants. However, cases where the breast shapes are unsuitable for implant-based reconstruction method are occasionally encountered. We present two patients with wide trunks who underwent breast reconstruction using an unusual configuration that involved a latissimus dorsi myocutaneous flap combined with two paranemic implants.

DIEP Flap Breast Reconstruction in Patients with Breast Ptosis: 2-Stage Reconstruction Using 3-Dimensional Surface Imaging and a Printed Mold

Background:

Autologous breast reconstruction can be performed for breasts with ptosis to a certain extent, but if patients desire to correct ptosis, mastopexy of the contralateral breast is indicated. However, accurate prediction of post-mastopexy breast shape is difficult to make, and symmetrical breast reconstruction requires certain experience. We have previously reported the use of three-dimensional (3D) imaging and printing technologies in deep inferior epigastric artery perforator (DIEP) flap breast reconstruction. In the present study, these technologies were applied to the reconstruction of breasts with ptosis.

Methods:

Eight breast cancer patients with ptotic breasts underwent two-stage unilateral DIEP flap breast reconstruction. In the initial surgery, tissue expander (TE) placement and contralateral mastopexy are performed simultaneously. Four to six months later, 3D bilateral breast imaging is performed after confirming that the shape of the contralateral breast (post-mastopexy) is somewhat stabilized, and a 3D-printed breast mold is created based on the mirror image of the shape of the contralateral breast acquired using analytical software. Then, DIEP flap surgery is performed, where the breast mold is used to determine the required flap volume and to shape the breast mound.

Results:

All flaps were engrafted without any major perioperative complications during both the initial and DIEP flap surgeries. Objective assessment of cosmetic outcome revealed that good breast symmetry was achieved in all cases.

Conclusions:

The method described here may allow even inexperienced surgeons to achieve reconstruction of symmetrical, non-ptotic breasts with ease and in a short time. While the requirement of two surgeries is a potential disadvantage, our method will be particularly useful in cases involving TEs, i.e., delayed reconstruction or immediate reconstruction involving significant skin resection.

A New Criterion for the Application of 2-Stage Implant-Only Breast Reconstruction Using a Classification Based on the Rostrocaudal Distance Along the Chest Wall Between the Lowest Point of the Breast and Inframammary Fold

Objective: It is generally difficult to achieve symmetry in implant-only breast reconstruction with ptosis, and it remains unclear what quantitative criterion may be applied in cases of breast ptosis regarding the application of this modality. Our study aimed to suggest a criterion for obtaining good aesthetic outcomes and a symmetrical inframammary fold that is well-fitting for the brassiere in implant-only breast reconstruction after simple mastectomy. Methods: We classified into 3 groups 50 consecutive patients who underwent implant-only breast reconstruction that created an inframammary fold using a modified internal method after simple mastectomy. The classification was based on the rostrocaudal distance along the chest wall between the lowest point of the breast the and the inframammary fold on the contralateral side (Dc, in millimeters). Thereafter, we compared this distance on the reconstructed side (Dr, in millimeters), Dc-Dr, and projection of the implant (Pi, in centimeters) between the groups and investigated the correlation between Dr and lower (Pi < 5.0 cm) and higher Pi (Pi ≥ 5.0 cm). Results: Dr was similar to Dc in groups 1 and 2 (0 ≤ Dc < 10 mm, 40/50 [80%]); however, Dr was significantly lesser than Dc in group 3 (Dc ≥ 10 mm, 10/50 [20%]). In addition, we found significant positive correlations between Dr and lower Pi and between Dr and higher Pi. Conclusions: A Dc below 10 mm may be a good indication for implant-only breast reconstruction. Furthermore, the modality may be applied where Dc is 7 mm or less in cases with lower Pi and where Dc is 13 mm or less in cases with higher Pi.

The Inframammary Fold (IMF): A Poorly Appreciated Landmark in Prosthetic/Alloplastic Breast Aesthetic and Reconstructive Surgery-Personal Experience

The inframammary fold (IMF) is the most critical visual landmark that affects final aesthetic outcome of augmentation mammoplasty and even post-mastectomy alloplastic breast reconstruction. Unfortunately, structural integrity of this landmark is greatly overlooked and very often neglected. Excessive undermining of the lower breast pole with aggressive disruption/lowering and subsequent poor reconstitution of the IMF scaffold combined with imbalanced implant-tissue dynamics may result in downward implant displacement with creep bottoming and upward tilt of the nipples. The current report reviews the experience of the senior author (BA) over 30 years in breast aesthetic and reconstructive surgery with IMF reconstruction and fixation to the chest wall at the inferior border of the implant. Illustrative cases are presented.

LEVEL OF EVIDENCE V

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .