Removing atherosclerotic plaque created using high cholesterol diet in rabbit using ultrasound

Investigating the potential of catheter-assisted pulsed focused ultrasound ablation for atherosclerotic plaques

BACKGROUND

Atherosclerosis is a condition in which an adhesive substance called plaque accumulates over time inside the arteries. Plaque buildup results in the constriction of arteries, causing a shortage of blood supply to tissues and organs. Removing atherosclerotic plaques controls the development of acute ischemic stroke and heart diseases. It remains imperative for positive patient outcomes.

PURPOSE

This study sought to develop a minimally invasive technique for removing arterial plaques by applying focused ultrasound (FUS) energy on the metal surface of a nitinol catheter wire to induce inertial cavitation. The induced cavitation can deplete plaque mechanically inside the arteries, leading towards improved recanalization of blood vessels.

METHODS

The enhanced cavitation effect induced by combining FUS with a metal catheter was first verified by exposing agar phantom gels with or without a 0.9-mm diameter nitinol wire to an acoustic field produced by a 0.5-MHz FUS transducer. The phenomenon was further confirmed in pork belly fat samples with or without a 3-mm diameter nitinol catheter wire. Cavitation was monitored by detecting the peaks of emitted ultrasound signals from the samples using a passive cavitation detector (PCD). Cavitation threshold values were determined by observing the jump in the peak amplitude of signals received by the PCD when the applied FUS peak negative pressure (PNP) increased. To simulate arterial plaque removal, FUS with or without a catheter was used to remove tissues from pork belly fat samples and the lipid cores of human atherosclerotic plaque samples using 2500-cycle FUS bursts at 10% duty cycle and a burst repetition rate of 20 Hz. Treatment outcomes were quantified by subtracting the weight of samples before treatment from the weight of samples after treatment. All measurements were repeated 5 times (n = 5) unless otherwise indicated, and paired t-tests were used to compare the means of two groups. A p-value of <0.05 will be considered significant.

RESULTS

Our results showed that with a nitinol wire, the cavitation threshold in agar phantoms was reduced to 2.6 MPa from 4.3 MPa PNP when there was no nitinol wire in the focal region of FUS. For pork belly fat samples, cavitation threshold values were 1.0 and 2.0 MPa PNP, with and without a catheter wire, respectively. Pork belly fat tissues and lipid cores of atherosclerotic plaques were depleted at the interface between a catheter and the samples at 2 and 4 MPa FUS PNP, respectively. The results showed that with a catheter wire in the focal region of a 3-min FUS treatment session, 24.7 and 25.6 mg of lipid tissues were removed from pork belly fat and human atherosclerotic samples, respectively. In contrast, the FUS-only group showed no reduction in sample weight. The differences between FUS-only and FUS-plus-catheter groups were statistically significant (p < 0.001 for the treatment on pork belly samples, and p < 0.01 for the treatment on human atherosclerotic samples).

CONCLUSION

This study demonstrated the feasibility of catheter-assisted FUS therapy for removing atherosclerotic plaques.

A feasibility study on removing lipid deposition in atherosclerotic plaques with ultrasound-assisted laser ablation

Objective. Atherosclerosis is the buildup of fats, cholesterol, and other substances on the inner walls of arteries. It can affect arteries of heart, brain, arms, legs, pelvis and kidney, resulting in ischemic heart disease, carotid artery disease, peripheral artery disease and chronic kidney disease. Laser-based treatment techniques like laser atherectomy can be used to treat many common atherosclerostic diseases. However, the use of laser-based treatment remains limited due to the high risk of complications and low efficiency in removing atherosclerostic plaques as compared with other treatment methods. In this study, we developed a technology that used high intensity focused ultrasound to assist laser treatment in the removal of the lipid core of atherosclerotic plaques.Approach. The fundamental mechanism to disrupt atherosclerostic plaque was to enhance the mechanical effect of cavitation during laser/ultrasound therapy. To promote cavitation, spatiotemporally synchronized ultrasound bursts of 2% duty cycle at 0.5 MHz and nanosecond laser pulses at 532 nm wavelength were used. Experiments were first performed on pig belly fat samples to titrate ultrasound and laser parameters. Then, experiments were conducted on human plaque samples, where the lipid depositions of the plaques were targeted.Main results. Our results showed that fat tissue could be removed with an ultrasound peak negative pressure (PNP) of 2.45 MPa and a laser radiant exposure as low as 3.2 mJ mm^-2. The lipid depositions on the atherosclerostic plaques were removed with laser radiant exposure of 16 mJ mm^-2in synchronizing with an ultrasound PNP of 5.4 MPa. During all the experiments, laser-only and ultrasound-only control treatments at the same energy levels were not effective in removing the lipid.Significance. The results demonstrated that the addition of ultrasound could effectively reduce the needed laser power for atherosclerotic plaque removal, which will potentially improve treatment safety and efficiency of current laser therapies.

Investigating atherosclerotic plaque phantoms for ultrasound therapy

PURPOSE

The aim of the proposed study was to conduct a feasibility study using a flat rectangular (2 × 10 mm2) transducer operating at 4.0 MHz for creating thermal lesions in an arterial atherosclerotic plaque phantom. The proposed method can be used in the future for treating atherosclerotic plaques in human arteries.

MATERIALS AND METHODS

The flat rectangular transducer was firstly assessed in agar/silica evaporated milk phantom, polyacrylamide phantom and freshly excised turkeytissue phantom. Then, the same transducer was assessed in an arterial atherosclerotic plaque phantom which was created in the laboratory with a very low cost. The recipe of the atherosclerotic plaque phantom was 4% w/v agar, 1% w/v gypsum, 2% w/v butter and 93% water. The amount of plaque removal was evaluated visually and using an X-Ray system.

RESULTS

It was shown that the flat rectangular transducer can create thermal lesions on the agar/silica evaporated milk phantom, polyacrylamide phantom and in excised tissue. The size of the lesions matches the geometry of the transducer. Moreover, this transducer destroyed 27.1% of the atherosclerotic plaque phantom with 8 W acoustical power and 30 s duration.

CONCLUSIONS

This feasibility study demonstrated that atherosclerotic plaque can be destroyed using a very small flat rectangular (2 × 10 mm2) transducer in a very small time interval of 30 s. In future clinical trials the transducer will be incorporated in a catheter which will be inserted intravascular (1-3 mm) wide and can be used to treat atherosclerotic plaques in the coronary arteries.

Evaluation of a small flat rectangular therapeutic ultrasonic transducer intended for intravascular use

BACKGROUND

The aim of the proposed study was to evaluate the performance of a flat rectangular (2×10mm²) transducer operating at 4MHz. The intended application of this transducer is intravascular treatment of thrombosis and atherosclerosis.

METHODS

The transducer's thermal capabilities were tested in two different gel phantoms. MR thermometry was used to demonstrate the thermal capabilities of this type of transducer.

RESULTS

Temperature measurements demonstrated that this simple and small transducer adequately produced high temperatures, which can be utilized for therapeutic purposes. These high temperatures were confirmed using thermocouple and MR measurements. Pulsed ultrasound in combination with thrombolytic drugs and microbubbles was utilized to eliminate porcine thrombi.

CONCLUSIONS

The proposed transducer has the potentials to treat atherosclerotic lesions using the thermal properties of ultrasound, since high temperatures can be achieved in less than 5s. The results revealed that the destruction of thrombi using pulsed ultrasound requires long exposure time and high microbubble dosage.