Three-dimensional volumetric evaluation of the different mandibular segments using CBCT in patients affected by juvenile idiopathic arthritis: a cross-sectional study

Assessing the Volume of the Head of the Mandibular Condyle Using 3T-MRI-A Preliminary Trial

Due to potentially harmful exposure to X-rays, condylar growth in response to orthodontic treatment is poorly studied. To overcome this limitation, here, the authors have proposed high-resolution MRI as a viable alternative to CBCT for clinical 3D assessment of TMJ. A male subject underwent both MRI and CBCT scans. The obtained three-dimensional reconstructions of the TMJ were segmented and superimposed by a semiautomatic algorithm developed in MATLAB R2022a. The condylar geometries were reconstructed using dedicated software for image segmentation. Two geometrical parameters, i.e., the total volume and surface of the single condyle model, were selected to quantify the intraclass and interclass variability from the mean of each DICOM series (CBCT and MRI). The final comparison between the reference standard model of CBCT and 3T MRI showed that the former was more robust in terms of reproducibility, while the latter reached a higher standard deviation compared to CBCT, but these values were similar between the operators and clinically not significant. Within the inherent limitation of image reconstruction on MRI scans due to the current lower resolution of this technique, the method proposed here could be considered as a nucleus for developing future completely automatic AI algorithms, owing to its great potential and satisfactory consistency among different times and operators.

Temporomandibular Joint Space in Mandibular Prognathism

This study compared the temporomandibular joint (TMJ) space between patients with normal and prognathic mandibles. The study included a total of 68 Korean individuals, and the TMJ space was measured using computed tomography. Patients with normal SNB values (normal mandible) were classified into Group 1. Patients with high SNB values (prognathic mandibles) were categorized into Group 2. The TMJ space was defined as the distance between the condylar process and the mandibular fossa, and it was significantly different between Groups 1 and 2 (1.94±0.07 mm versus 1.50±0.05 mm, P< 0.01). This study confirmed that the TMJ space in patients with prognathic mandibles is narrower than that in patients with normal mandibles.

Appraisal of the Accuracy and Reliability of Cone-Beam Computed Tomography and Three-Dimensional Printing for Volumetric Mandibular Condyle Measurements of a Human Condyle

Background This study aims to evaluate the accuracy of volumetric measurements of three-dimensional (3D)-printed human condyles from cone-beam computed tomography (CBCT) in comparison to physical condyles using a water displacement test. Methodology A sample of 22 dry condyles was separated from the mandibular body by disc, mounted on a base made of casting wax, and scanned using the SCANORA (Scanora 3DX, Soredex, Finland) CBCT scanner. Subsequently, the projection data were reconstructed with the machine-dedicated OnDemand 3D (Cybermed Co., Seoul, Korea). The Standard Tessellation Language file was prepared for 3D printing using chitubox slicing software v1.9.1. Frozen water-washable gray resin was used for 3D printing. All condyles were printed using the same parameters and the same resin. The volumetric measurements were then performed using a customized modified pycnometer based on water volume and weight displacement. Volumetric measures were performed for both the physical human condyles and the 3D-printed replicas and the measurements were then compared. Results The volume of dry condyles using the water displacement method showed an average (±SD) of 1.925 ± 0.40 cm3. However, the volume of 3D-printed replicas using the water displacement method showed an average (±SD) of 2.109 ± 0.40 cm3. The differences in measurements were insignificant (p > 0.05), as revealed by an independent t-test. Conclusions Highly precise, accurate, and reliable CBCT for volumetric mandibular condyle was applied for measurements of a human condyle and 3D-printed replica. The modified pycnometer for volumetric measurements presented an excellent volumetric measure based on a simple water displacement device. The tested modified pycnometer can be applied in volumetric measurements in both 3D-printed and mandibular condyle. For best accuracy, the highest scanning resolution possible should be used. As it directly handles irregularly shaped solid objects in a non-destructive manner with a high level of precision and reliability, this 3D scanning approach may be seen as a superior alternative to the current measurement methods.

Comparison of the skeletal, dentoalveolar, and periodontal changes after Ni-Ti leaf spring expander and rapid maxillary expansion: a three-dimensional CBCT based evaluation

BACKGROUND

The aim of the present study was twofold:(1) three-dimensionally evaluate the quantitative skeletal and dentoalveolar changes after Ni-Ti leaf spring expander (leaf expander) and rapid maxillary expansion (RME) in mixed dentition patients;(2) analyze the modifications of the buccal alveolar bone plate of the maxillary first permanent molars.

METHODS

Patients who underwent CBCT scans before and after maxillary expansion were randomly selected from the records archived at the Department of Biomedical Surgical and Dental Sciences, University of Milan, Italy. Inclusion criteria were the following: no systemic disease or syndromes; maxillary transverse deficiencies (difference between the upper intermolar width and the lower intermolar width of at least 3 mm and/or clinical need based on radiographic evaluation), early mixed dentition with ages between 7 to 10 years old; cervical vertebra maturation stage (CVMS) 1 or 2; no pathologic periodontal status; skeletal class I or II; maxillary expander cemented on the upper second deciduous molars. Exclusion criteria were the following: patients with pubertal or post-pubertal stage of development (CVMS 3-6); late deciduous or late mixed dentition, impossibility to use the second primary molar as anchorage; skeletal class III malocclusion; craniofacial syndromes; patients unable to be followed during the treatment period. Twenty-three patients treated with Leaf Expander, 11 males (mean age 7.8 ± 0.6 years) and 12 females (mean age 8.1 ± 0.8 years), met the inclusion criteria and constituted the case group. Twenty-four (control group) treated with conventional RME, 12 males (mean age 8.4 ± 0.9 years) and 12 females (mean age 8.1 ± 0.7 years). The paired-sample T test was used for intra-group comparison to evaluate the difference between before (T1) and after (T2) maxillary expansion. Independent sample t-test was computed to perform between groups comparison of the skeletal, dentoalveolar, and periodontal changes.

RESULTS

The Leaf Expander and RME group showed a significant increase between T1 and T2 for most of the skeletal and dentoalveolar variables. Concerning the skeletal variables only the RME demonstrated a significant increase at the level of the posterior nasal (PNW) and apical base width (PABW) and maxillary mid-alveolar width (MMW). Despite this, when compare with the Leaf Expander, the RME group exhibited a statistically larger width increase for only two skeletal parameters: PNW (p = 0.03) and MMW (p = 0.02). No significant changes at the periodontal level were found in either group.

CONCLUSIONS

According to the current research, the authors confirm the effectiveness of the Leaf Expander and RME to produce similar skeletal and dentoalveolar effects in mixed dentition subjects. Moreover, the devices anchored to deciduous teeth did not reduce the thickness and height of the buccal bone at the level of the maxillary permanent first molars in either of the two groups.

A Comparison of the Condyle and Articular Eminence in Asian Juvenile Idiopathic Osteoarthritis Patients with Unilateral and Bilateral TMJ Involvement: A Retrospective Case-Control Study

This study compared the condylar volume, length, and articular eminence (AE) characteristics of normal individuals to those with unilateral and bilateral juvenile idiopathic osteoarthritis (JOA). The 116 patients were divided into four groups: Control (n = 16), affected condyle of unilateral JOA (Aff-Uni) (n = 36), non-affected condyle of JOA (NonAff-uni) (n = 36), and bilateral JOA (Bilateral) (n = 28). The differences in condyle volume and length and AE were analyzed using ANOVA and Bonferroni post-hoc tests. The results showed that Bilateral had a significantly different condylar volume, especially in the condylar head (p < 0.01), specifically the middle, anterior, and medial parts (p < 0.05). Condylar length also differed among the groups, with differences observed between the control group and the other three groups, as well as between the bilateral group and the other three groups (p < 0.01). AE total volume differed between the control group and Aff-Uni. In the detailed comparison, Aff-Uni and NonAff-Uni were smaller than the control group in the posterior, lateral, and medial sections (p < 0.05). In conclusion, depending on the involvement of unilateral or bilateral JOA, there were differences in condylar volume and AE when compared to the normal control group. Therefore, a prognosis should be evaluated by distinguishing between patients with unilateral and bilateral JOA.

A Scoping Review of the Use of Pioglitazone in the Treatment of Temporo-Mandibular Joint Arthritis

Thiazolidinediones (TZDs) are a group of diabetes medications currently being investigated for anti-arthritis effectiveness, one of which is pioglitazone. The purpose of this scoping review is to evaluate the potential use of pioglitazone in the treatment of temporomandibular joint (TMJ) arthritis. The criteria of eligibility were studies with the diagnosis of arthritis and pioglitazone treatment with a change in any inflammation index as an outcome. Of the 1169 records initially identified following the selection process, two animal studies and four clinical studies were included in the review. Improvements from the baseline were observed in each treatment group for each inflammation indicator. The results of the animal studies on the temporomandibular joints and on patients with rheumatoid and psoriatic arthritis indicate that the drug in question may have potential to treat arthritis, including within the temporomandibular joint.

Analysis of the Volumetric Asymmetry of the Mandibular Condyles Using CBCT

Objectives

The aim of this study was to analyse volumetric asymmetries between the right and left condyles in relation to age, gender, and dental status.

Materials and methods

A retrospective analysis of 150 cone beam computed tomography (CBCT) scans was conducted. A single investigator performed the volumetric analysis of the CBCT scans using Vesalius 3D software. The volumetric data were analysed in relation to the gender, age, and dental status.

Results

The mean right condylar volume was significantly higher (P < .01) than the left condylar volume. Right and left condylar volumes were significantly higher (P < .01) in male study participants when compared to female study participants. There was no significant difference (P = .47) in the volumetric asymmetry between the male and female study participants. The volumetric asymmetry was significantly higher (P < .01) in the older age groups when compared to the younger age groups. The volumetric asymmetry was significantly higher (P < .01) in the partially and completely edentulous patients when compared to the dentate study participants. The condylar volume on the side having a partially edentulous area was significantly lower than the condylar volume of the contralateral dentate side (P < .001).

Conclusions

The volumetric asymmetry between the right and left condyle significantly increases with age and edentulousness. The result of the study encourages the clinicians to perform volumetric evaluation of the condyles in cases of radiographically evident condylar asymmetries to obtain a more accurate diagnosis.

Cone Beam Computerized Tomographic Analysis of Collum Angle of the Maxillary Central Incisors in Different Types of Malocclusion: Comparative Assessment in Saudi, Jordan and Egypt Subpopulation

Background: The collum angle (CA) is an extremely significant for patients who are undergoing orthodontic, dental implant restoration, prosthodontic and periodontic treatments. Aim and Objectives: To determine and compare the mean CA for maxillary central incisor in different types of malocclusion utilizing 3D Cone Beam Computerized Tomography (CBCT) images. The additional objectives were to determine and compare the mean CA for maxillary central incisor based upon the demographic characteristics among Saudi, Jordan and Egypt subpopulation and to test for significant differences in the CA of maxillary central incisor with different molar malocclusions. Methodology: A total of 400 CBCT images were included from the radiology archive at the College of Dentistry, Jouf University (Sakaka, Saudi Arabia). The CBCT images were divided into four groups based upon molar classifications. The selected records were used for the measurement of CA of maxillary central incisor using the measurement tool built into 3D:OnDemand software. Statistical analysis was done using independent t test and ANOVA to examine the differences between gender and races. Results: The mean CA for Class II div 2 exhibited significantly higher crown-root variation as compared other groups (p < 0.0001). Males sample showed greater value of CA for each group as compared to the females and this difference was statistically significant for all the groups other than for Class I (p < 0.05). The post hoc pairwise comparisons between the races showed statistically insignificant findings (p > 0.05). Significant difference was found on pairwise comparisons among different malocclusion groups other than for group Class I/Class II div 1 (p < 0.05). Conclusion: The CA of Class II div 2 group was the greatest as compared to other malocclusion groups. Males sample showed greater value of CA for each group as compared to the females and this difference was statistically significant for all the groups other than for Class I. Statistically insignificant difference was noted for the mean CA among different races whereas significant difference was found on pairwise comparisons among different malocclusion groups other than for group Class I/Class II div 1.

Incidental Finding in Pre-Orthodontic Treatment Radiographs of an Aural Foreign Body: A Case Report

The presence of foreign bodies in the external auditory canal of young patients may cause, if left untreated, severe permanent damage to the adjacent anatomical structures, and infections. A 10-year-old patient with an intellectual disability underwent orthodontic evaluation. An aural radiopaque finding was visible in the lateral cephalogram and in the orthopantomography. The patient’s mother reported that her son never showed any ear discomfort, except for a mild hearing impairment that was never investigated. The patient was referred to an ear, nose and throat (ENT) specialist that removed the foreign body located in the left external auditory meatus. The careful evaluation of dental radiographs, including pre-orthodontic and interim orthodontic radiographs, may help to identify silent incidental findings that may otherwise lead to severe complications if left untreated.

A CBCT based analysis of the correlation between volumetric morphology of the frontal sinuses and the facial growth pattern in caucasian subjects. A cross-sectional study

Background

The aim of this study was to evaluate the relationship between frontal sinus shape and facial growth pattern.

Methods

The three-dimensional examination was carried out by means of 80 CBCT scans selected from a sample of 1247 records of patients treated, for different reason, at the Department of Biomedical Surgical and Dental Sciences at University of Milan, Fondazione IRCCS Ca’ Granda, Ospedale Maggiore Policlinico Milan. The sample (age ranges between 12 and 40 years) was divided according to gender and age in four groups (12-17, 18-20, 21-30, 31-40). Left and right frontal sinus volume (VOL), surface (SUP) and linear maximum width (XMAX), depth (ZMAX) and height (YMAX) were calculated using Mimics Research 17.0 (Materialise N.V., Leuven, Belgium). Cephalometric analysis has been performed for all subjects to categorize the patients depending on their facial growth pattern. Univariate and multivariate regression analysis were performed to investigate any association of frontal sinuses measurements (height, width, depth, volume and surface) and cephalometric variables. P value < 0.05 was considered statistically significant.

Results

A total of 160 frontal sinuses were measures in 80 patients: 40 men and 40 women, average age of 23.5 ±14.6. Globally the frontal sinuses had the following average dimensions: volumes of 9055.8 ± 6505 mm³ and surfaces of 3820.3 ± 2125 mm². The statistical analysis showed that frontal sinus volume was statistically significant (p=0.003) greater for male (11,425 mm³) than female (6597.5 mm³). Similarly, the surface showed to be greater in men than in women (p=0.005). No correlation between age and frontal sinuses characteristics has been found. A statistically significant (p<0.05) increase of frontal sinus depth, surface and volume was correlated with SNB angle. In addition, frontal sinus volume increased in subjects with greater anterior skeletal dimension values and with a superior length of the cranial base. Furthermore, a decrease of ANB has been found related to an increase in frontal sinus volume (p=0.04).

Conclusions

The present study showed a correlation between frontal sinuses dimensions and craniofacial aspects, despite the inter-individual variability of their morphology. The results suggested that young adults in whom the frontal sinuses have reached their maximum size, while vertical growth continues, a larger frontal sinus may be associated with future vertical growth.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13005-022-00308-3.