Cell-free osteochondral scaffolds provide a substantial clinical benefit in the treatment of osteochondral defects at a minimum follow-up of 5 years

Subchondral bone: An emerging target for the treatment of articular surface lesions of the knee

Purpose

When dealing with the health status of the knee articular surface, the entire osteochondral unit has gained increasing attention, and in particular the subchondral bone, which plays a key role in the integrity of the osteochondral unit. The aim of this article was to discuss the current evidence on the role of the subchondral bone.

Methods

Experts from different geographical regions were involved in performing a review on highly discussed topics about the subchondral bone, ranging from its etiopathogenetic role in joint degeneration processes to its prognostic role in chondral and osteochondral defects, up to treatment strategies to address both the subchondral bone and the articular surface.

Discussion

Subchondral bone has a central role both from an aetiologic point of view and as a diagnostic tool, and its status was found to be relevant also as a prognostic factor in the follow-up of chondral treatment. Finally, the recognition of its importance in the natural history of these lesions led to consider subchondral bone as a treatment target, with the development of osteochondral scaffolds and procedures to specifically address osteochondral lesions.

Conclusion

Subchondral bone plays a central role in articular surface lesions from different points of view. Several aspects still need to be understood, but a growing interest in subchondral bone is to be expected in the upcoming future towards the optimization of joint preservation strategies.

Level of Evidence

Level V, expert opinion.

Arthroscopic Implantation of a Cell-Free Bilayer Scaffold for the Treatment of Knee Chondral Lesions: A 2-Year Prospective Study

OBJECTIVE

The main objective of this study is to assess the safety and clinical efficacy of a cell-free bilayer scaffold (MaioRegen Chondro+ by Fin-Ceramica) in patients affected by chondral knee lesions of different origin and localization.

DESIGN

Thirty-one patients with focal chondral lesions of the knee were arthroscopically treated with MaioRegen Chondro+. All patients were prospectively evaluated for a minimum of 2 years using the International Knee Documentation Committee (IKDC) Questionnaire and the Tegner Activity Scale. Cartilage repair was assessed based on the Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART) 2.0 score at 12 months. Follow-up at 36 months was available for 25 out of 31 patients.

RESULTS

From baseline to 6-, 12-, and 24-month follow-up, IKDC score significantly improved by 19.5 ± 7.27 (95% confidence interval [CI]: 16.9-22.2, P < 0.001), 30.8 ± 7.63 (95% CI: 28.0-33.6, P < 0.001), and 36.2 ± 8.00 points (95% CI: 33.3-39.2, P < 0.001), respectively. Tegner scores documented a substantial clinical improvement as early as 12 months after surgery (change of -0.6 ± 0.62; 95% CI: -0.8 to -0.4, P < 0.001), reaching the preinjury values. There was a statistically significant increase in the MOCART scores (P < 0.001). Comparable results were observed regardless of preintervention demographic characteristics, lesion site or etiology, or the number of treated sites. Notably, the significant clinical benefit was maintained in a subset of patients who reached 3-year follow-up. No adverse events were reported in the entire analyzed population.

CONCLUSION

MaioRegen Chondro+ is a safe and effective device for the treatment of knee chondral lesions, enabling a significant clinical improvement for at least 2 years.

Sex does not influence the long-term outcome of matrix-assisted autologous chondrocyte transplantation

PURPOSE

Regenerative techniques for articular cartilage lesions demonstrated heterogeneous clinical results. Several factors may influence the outcome, with sex being one of the most debated. This study aimed at quantifying the long-term influence of sex on the clinical outcome obtained with a regenerative procedure for knee chondral lesions.

METHODS

Matrix-assisted autologous chondrocyte transplantation (MACT) was used to treat 235 knees which were prospectively evaluated with the International Knee Documentation Committee (IKDC), EuroQol visual analogue scale, and Tegner scores at 14-year mean follow-up. A multilevel analysis was performed with the IKDC subjective scores standardised according to the age/sex category of each patient and/or the selection of a match-paired subgroup to compare homogeneous men and women patients.

RESULTS

At 14 years, men and women showed a failure rate of 10.7% and 28.8%, respectively (p < 0.0005). An overall improvement was observed in both sexes. Women had more patellar lesions and men more condylar lesions (p = 0.001), and the latter also presented a higher preinjury activity level (p < 0.0005). Men had significantly higher IKDC subjective scores at all follow-ups (at 14 years: 77.2 ± 18.9 vs. 62.8 ± 23.1; p < 0.0005). However, the analysis of homogeneous match-paired populations of men and women, with standardised IKDC subjective scores, showed no differences between men and women (at 14 years: -1.6 ± 1.7 vs. -1.9 ± 1.6).

CONCLUSION

Men and women treated with MACT for knee chondral lesions presented a significant improvement and stable long-term results. When both sexes are compared with homogeneous match-paired groups, they have similar results over time. However, women present more often unfavourable lesion patterns, which proved more challenging in terms of long-term outcome after MACT.

LEVEL OF EVIDENCE

Level II.

Modulating design parameters to drive cell invasion into hydrogels for osteochondral tissue formation

Background

The use of acellular hydrogels to repair osteochondral defects requires cells to first invade the biomaterial and then to deposit extracellular matrix for tissue regeneration. Due to the diverse physicochemical properties of engineered hydrogels, the specific properties that allow or even improve the behaviour of cells are not yet clear. The aim of this study was to investigate the influence of various physicochemical properties of hydrogels on cell migration and related tissue formation using in vitro, ex vivo and in vivo models.

Methods

Three hydrogel platforms were used in the study: Gelatine methacryloyl (GelMA) (5% wt), norbornene hyaluronic acid (norHA) (2% wt) and tyramine functionalised hyaluronic acid (THA) (2.5% wt). GelMA was modified to vary the degree of functionalisation (DoF 50% and 80%), norHA was used with varied degradability via a matrix metalloproteinase (MMP) degradable crosslinker and THA was used with the addition of collagen fibrils. The migration of human mesenchymal stromal cells (hMSC) in hydrogels was studied in vitro using a 3D spheroid migration assay over 48h. In addition, chondrocyte migration within and around hydrogels was investigated in an ex vivo bovine cartilage ring model (three weeks). Finally, tissue repair within osteochondral defects was studied in a semi-orthotopic in vivo mouse model (six weeks).

Results

A lower DoF of GelMA did not affect cell migration in vitro (p ​= ​0.390) and led to a higher migration score ex vivo (p ​< ​0.001). The introduction of a MMP degradable crosslinker in norHA hydrogels did not improve cell infiltration in vitro or in vivo. The addition of collagen to THA resulted in greater hMSC migration in vitro (p ​= ​0.031) and ex vivo (p ​< ​0.001). Hydrogels that exhibited more cell migration in vitro or ex vivo also showed more tissue formation in the osteochondral defects in vivo, except for the norHA group. Whereas norHA with a degradable crosslinker did not improve cell migration in vitro or ex vivo, it did significantly increase tissue formation in vivo compared to the non-degradable crosslinker (p ​< ​0.001).

Conclusion

The modification of hydrogels by adapting DoF, use of a degradable crosslinker or including fibrillar collagen can control and improve cell migration and tissue formation for osteochondral defect repair. This study also emphasizes the importance of performing both in vitro and in vivo testing of biomaterials, as, depending on the material, the results might be affected by the model used.The translational potential of this article: This article highlights the potential of using acellular hydrogels to repair osteochondral defects, which are common injuries in orthopaedics. The study provides a deeper understanding of how to modify the properties of hydrogels to control cell migration and tissue formation for osteochondral defect repair. The results of this article also highlight that the choice of the used laboratory model can affect the outcome. Testing hydrogels in different models is thus advised for successful translation of laboratory results to the clinical application.

Marine-Inspired Approaches as a Smart Tool to Face Osteochondral Regeneration

The degeneration of osteochondral tissue represents one of the major causes of disability in modern society and it is expected to fuel the demand for new solutions to repair and regenerate the damaged articular joints. In particular, osteoarthritis (OA) is the most common complication in articular diseases and a leading cause of chronic disability affecting a steady increasing number of people. The regeneration of osteochondral (OC) defects is one of the most challenging tasks in orthopedics since this anatomical region is composed of different tissues, characterized by antithetic features and functionalities, in tight connection to work together as a joint. The altered structural and mechanical joint environment impairs the natural tissue metabolism, thus making OC regeneration even more challenging. In this scenario, marine-derived ingredients elicit ever-increased interest for biomedical applications as a result of their outstanding mechanical and multiple biologic properties. The review highlights the possibility to exploit such unique features using a combination of bio-inspired synthesis process and 3D manufacturing technologies, relevant to generate compositionally and structurally graded hybrid constructs reproducing the smart architecture and biomechanical functions of natural OC regions.

Recent strategies of collagen-based biomaterials for cartilage repair: from structure cognition to function endowment

Collagen, characteristic in biomimetic composition and hierarchical structure, boasts a huge potential in repairing cartilage defect due to its extraordinary bioactivities and regulated physicochemical properties, such as low immunogenicity, biocompatibility and controllable degradation, which promotes the cell adhesion, migration and proliferation. Therefore, collagen-based biomaterial has been explored as porous scaffolds or functional coatings in cell-free scaffold and tissue engineering strategy for cartilage repairing. Among those forming technologies, freeze-dry is frequently used with special modifications while 3D-printing and electrospinning serve as the structure-controller in a more precise way. Besides, appropriate cross-linking treatment and incorporation with bioactive substance generally help the collagen-based biomaterials to meet the physicochemical requirement in the defect site and strengthen the repairing performance. Furthermore, comprehensive evaluations on the repair effects of biomaterials are sorted out in terms of in vitro, in vivo and clinical assessments, focusing on the morphology observation, characteristic production and critical gene expression. Finally, the challenge of biomaterial-based therapy for cartilage defect repairing was summarized, which is, the adaption to the highly complex structure and functional difference of cartilage.

Graphical abstract

3D Printed Multiphasic Scaffolds for Osteochondral Repair: Challenges and Opportunities

Osteochondral (OC) defects are debilitating joint injuries characterized by the loss of full thickness articular cartilage along with the underlying calcified cartilage through to the subchondral bone. While current surgical treatments can provide some relief from pain, none can fully repair all the components of the OC unit and restore its native function. Engineering OC tissue is challenging due to the presence of the three distinct tissue regions. Recent advances in additive manufacturing provide unprecedented control over the internal microstructure of bioscaffolds, the patterning of growth factors and the encapsulation of potentially regenerative cells. These developments are ushering in a new paradigm of 'multiphasic' scaffold designs in which the optimal micro-environment for each tissue region is individually crafted. Although the adoption of these techniques provides new opportunities in OC research, it also introduces challenges, such as creating tissue interfaces, integrating multiple fabrication techniques and co-culturing different cells within the same construct. This review captures the considerations and capabilities in developing 3D printed OC scaffolds, including materials, fabrication techniques, mechanical function, biological components and design.

Combinations of Hydrogels and Mesenchymal Stromal Cells (MSCs) for Cartilage Tissue Engineering-A Review of the Literature

Cartilage offers limited regenerative capacity. Cell-based approaches have emerged as a promising alternative in the treatment of cartilage defects and osteoarthritis. Due to their easy accessibility, abundancy, and chondrogenic potential mesenchymal stromal cells (MSCs) offer an attractive cell source. MSCs are often combined with natural or synthetic hydrogels providing tunable biocompatibility, biodegradability, and enhanced cell functionality. In this review, we focused on the different advantages and disadvantages of various natural, synthetic, and modified hydrogels. We examined the different combinations of MSC-subpopulations and hydrogels used for cartilage engineering in preclinical and clinical studies and reviewed the effects of added growth factors or gene transfer on chondrogenesis in MSC-laden hydrogels. The aim of this review is to add to the understanding of the disadvantages and advantages of various combinations of MSC-subpopulations, growth factors, gene transfers, and hydrogels in cartilage engineering.