Palm oil mill effluent as a low-cost substrate for bioflocculant production by Bacillus marisflavi NA8

Cellulase production by Aspergillus fumigatus A4112 and the potential use of the enzyme in cooperation with surfactant to enhance floating oil recovery and methane production from palm oil mill effluent

This research performed cellulase production by Aspergillus fumigatus A4112 and evaluated its potential use in palm oil mill effluent (POME) hydrolysis to recover oil simultaneously with the generation of fermentable sugar useful for biofuel production under non-sterilized conditions. Empty fruit bunch (EFB) without pretreatment was used as carbon source. The combination of nitrogen sources facilitated CMCase production. The maximum activity (3.27 U/mL) was obtained by 1.0 g/L peptone and 1.5 g/L (NH4)2SO4 and 20 g/L EFB at 40 °C for 7 days. High level of FPase activity (39.51 U/mL) was also obtained. Interestingly, the enzyme retained its cellulase activities more than 60% at ambient temperature over 15 days. In enzymatic hydrolysis, Triton X-100 was an effective surfactant to increase total oil recovery in the floating form. High yield of reducing sugar (50.13 g/L) and 21% (v/v) of floating oil was recoverable at 65 °C for 48 h. Methane content of the raw POME increased from 41.49 to 64.94% by using de-oiled POME hydrolysate which was higher than using the POME hydrolysate (59.82%). The results demonstrate the feasibility of the constructed process for oil recovery coupled with a subsequent step for methane yield enhancement in biogas production process that benefits the palm oil industry.

Statistical Optimization for Cost-Effective Production of Yeast-Bacterium Cell-Bound Lipases Using Blended Oily Wastes and Their Potential Applications in Biodiesel Synthesis and Wastewater Bioremediation

Oily wastes have been widely used to produce lipases, but there is insufficient knowledge on their use to efficiently produce cell-bound lipases (CBLs). This research aimed to optimize yeast–bacterium CBLs production using blended oily wastes by statistical optimization and their potential applications in biodiesel production and wastewater bioremediation. The co-culture of Magnusiomyces spicifer AW2 and Staphylococcus hominis AUP19 produced CBLs as high as 4709 U/L with cell biomass of 23.4 g/L in a two-fold diluted palm oil mill effluent (POME) added by 2.08% (v/v) waste frying oil, 1.72.0% (w/v) ammonium sulfate, 0.1% (w/v) Gum Arabic as an emulsifier (initial pH at 7.0) within 24 h. The CBLs were successfully applied as whole-cell biocatalysts to produce biodiesel through esterification and transesterification with 76% and 87% yields, respectively. Direct application of CBLs for bioremediation of heat-treated various POME concentrations achieved 73.3% oil and grease removal and 73.6% COD removal within 3 days. This study has shown that the blended oily wastes medium was suitable for low-cost production of yeast–bacterium CBLs and their potential applications in solvent-free biodiesel production and wastewater bioremediation. These strategies may greatly contribute to economical green biofuel production and waste biotreatment.

Production of a bioflocculant from Enterobacter sp. P3 using brewery wastewater as substrate and its application in fracturing flowback water treatment

A novel bioflocculant (BW-P3) was produced by a strain of Enterobacter sp. P3 using brewery wastewater as substrate and was further applied to remove the colored substance of fracturing flowback water. The optimum conditions for bioflocculant production were specified by the response surface methodology as COD of brewery wastewater 1487.77 mg/L, glucose 8.94 g/L and initial pH 7.09, under which a bioflocculant yield of 1.274 g/L could be reached. The BW-P3 consists of 79.12% polysaccharides and 15.63% protein. Results show that BW-P3 has a high molecular weight (921 kDa) and contains functional groups (hydroxyl, amino, carbonyl, and acylamino) that likely contribute to flocculation. When using the BW-P3 to flocculate fracturing flowback water, the optimal dosage was 1 g/L BW-P3 with addition of 100 mg/L polymeric aluminum chloride as coagulant aid, and treated under 50 °C at pH 7. Under the optimal condition, the removal rates of chroma and suspended solids (SS) of the fracturing flowback water could reach 85% and 52%, respectively.

Production of a bioflocculant from Klebsiella sp. OS-1 using brewery wastewater as a source

This study evaluated the potential of bioflocculant production from a Klebsiella strain using brewery wastewater as nutrients. The bioflocculant named OS-1B produced by Klebsiella sp. OS-1 exhibited a good flocculating activity to kaolin clay suspension (around 95%), when the diluted brewery wastewater with 7.2 mg/L total nitrogen and 1013 mg/L COD_Cr was used as a nitrogen source. Glucose (15 g/L) is the most favorable carbon source for Klebsiella sp. OS-1 in bioflocculant production from brewery wastewater. The yielded bioflocculant is pH tolerant and thermally stable, suggesting its good industrial potential. OS-1B mainly comprises polysaccharide (69.4%) and protein (24.5%). Fourier-transform infrared spectra indicate the presence of hydroxyl, carboxyl, esters and amino groups in the bioflocculant molecules. Combined with the results of zeta potential measurements, bridging is suggested as the main flocculation mechanism for OS-1B flocculation with kaolin. Overall, brewery wastewater can be used as a substrate to produce bioflocculants.

Recent advances in polysaccharide bio-based flocculants

Natural polysaccharides, derived from biomass feedstocks, marine resources, and microorganisms, have been attracting considerable attention as benign and environmentally friendly substitutes for synthetic polymeric products. Besides many other applications, these biopolymers are rapidly emerging as viable alternatives to harmful synthetic flocculating agents for the removal of contaminants from water and wastewater. In recent years, a great deal of effort has been devoted to improve the production and performance of polysaccharide bio-based flocculants. In this review, current trends in preparation and chemical modification of polysaccharide bio-based flocculants and their flocculation performance are discussed. Aspects including mechanisms of flocculation, biosynthesis, classification, purification and characterization, chemical modification, the effect of physicochemical factors on flocculating activity, and recent applications of polysaccharide bio-based flocculants are summarized and presented.