Preparation of injectable hydrogel with near-infrared light response and photo-controlled drug release

Magnetic multilayer hydrogel oral microrobots for digestive tract treatment

Oral administration is a convenient drug delivery method in our daily lives. However, it remains a challenge to achieve precise target delivery and ensure the efficacy of medications in extreme environments within the digestive system with complex environments. This paper proposes an oral multilayer magnetic hydrogel microrobot for targeted delivery and on-demand release driven by a gradient magnetic field. The inner hydrogel shells enclose designated drugs and magnetic microparticles. The outer hydrogel shells enclose the inner hydrogel shells, magnetic microparticles, and pH neutralizers. The drug release procedure is remotely implemented layer-by-layer. When the required gradient magnetic field is applied, the outer hydrogel shells are destroyed to release their inclusions. The enclosed pH neutralizers scour the surrounding environment to avoid damaging drugs by the pH environment. Subsequently, the inner hydrogel shells are destroyed to release the drugs. A set of experiments are conducted to demonstrate the wirelessly controllable target delivery and release in a Petri dish and biological tissues. The results demonstrated attractive advantages of the reported microrobot in microcargo delivery with almost no loss, remote controllable release, and drug protection by the pH neutralizers. It is a promising approach to advance next-generation precision oral therapies in the digestive system.

Injectable Hydrogels: A Paradigm Tailored with Design, Characterization, and Multifaceted Approaches

Biomaterials denoting self-healing and versatile structural integrity are highly curious in the biomedicine segment. The injectable and/or printable 3D printing technology is explored in a few decades back, which can alter their dimensions temporarily under shear stress, showing potential healing/recovery tendency with patient-specific intervention toward the development of personalized medicine. Thus, self-healing injectable hydrogels (IHs) are stunning toward developing a paradigm for tissue regeneration. This review comprises the designing of IHs, rheological characterization and stability, several benchmark consequences for self-healing IHs, their translation into tissue regeneration of specific types, applications of IHs in biomedical such as anticancer and immunomodulation, wound healing and tissue/bone regeneration, antimicrobial potentials, drugs, gene and vaccine delivery, ocular delivery, 3D printing, cosmeceuticals, and photothermal therapy as well as in other allied avenues like agriculture, aerospace, electronic/electrical industries, coating approaches, patents associated with therapeutic/nontherapeutic avenues, and numerous futuristic challenges and solutions.

A Soft Capsule for Magnetically Driven Drug Delivery Based on a Hard-Magnetic Elastomer Foam

Drug delivery systems based on porous soft biomaterials have been widely reported because of stimuli-responsive drug release and their inherent reservoirs for drug storage. Especially, magnetic-responsive porous soft biomaterials achieve rapid and real-time control of drug release due to the magnetic field-triggered large deformation. However, the drug release profiles of these materials are difficult to predict and repeat, which restrict them from releasing drugs in the required dosage. Here, we report a soft capsule based on a flexible hard-magnetic elastomer foam (HEF) for magnetically controlled on-demand drug delivery. The HEF capsule contains an inner HEF and an outer elastomer shell. The HEF exhibits low elastic modulus (10 kPa) and highly interconnected pores (81% interconnected pores). Benefitting from the novel precompressed magnetization, the compressive deformation of HEF reaches 66%. Thus, an adjustable drug release rate ranging from 0.02 to 1.7 mL/min in the HEF capsule is achieved. The deformation-triggered drug release profiles of the HEF capsule under the magnetic field are accurately predicted, allowing 85% accuracy in drug dosage regulation and more than 90% maximum cumulative drug release. Especially, the HEF capsule is proven capable of acting as a soft robot to perform magnetically driven drug delivery in a human stomach model. HEF can potentially serve as a soft robot for biomedical applications in the human body.

Coupling fermentation of glutamic acid and γ-polyglutamic acid and preparation of poly(amino acid) superabsorbent polymers

γ-polyglutamic acid (γ-PGA) is a biomarker that can be directly obtained by microbial fermentation. Poly(amino acid) superabsorbent polymers (SAPs) were prepared with purified γ-PGA as raw material and ethylene glycol diglycidyl ether (EGDGE) as a cross-linking agent. However, γ-PGA fermentation broth has a high viscosity, requires complex extraction and separation processes, and entails high energy consumption, resulting in the high cost of poly (amino acid) SAPs. Therefore, the coupling fermentation processes of glutamate polyglutamic acid, the process of using glutamate fermentation broth instead of pure glutamate powder for fermentation, and the process of treating the fermentation broth under conditions of centrifugation, UV irradiation, and high temperature, were studied. The results showed that the yield of γ-PGA after centrifugation decreased by 5%, but it did not affect the synthesis of hydrogels, and the addition of γ-PGA fermentation broth had a significant effect on the performance of γ-PGA-co-PASP SAPs. The proposed method not only helps avoid the separation of complex γ-PGA fermentation broth and reduces the cost, but it also helps improve the performance of the super-absorbent resin, which has great application potential.

The State of the Art of Natural Polymer Functionalized Fe3O4 Magnetic Nanoparticle Composites for Drug Delivery Applications: A Review

Natural polymers have received a great deal of interest for their potential use in the encapsulation and transportation of pharmaceuticals and other bioactive compounds for disease treatment. In this perspective, the drug delivery systems (DDS) constructed by representative natural polymers from animals (gelatin and hyaluronic acid), plants (pectin and starch), and microbes (Xanthan gum and Dextran) are provided. In order to enhance the efficiency of polymers in DDS by delivering the medicine to the right location, reducing the medication's adverse effects on neighboring organs or tissues, and controlling the medication's release to stop the cycle of over- and under-dosing, the incorporation of Fe3O4 magnetic nanoparticles with the polymers has engaged the most consideration due to their rare characteristics, such as easy separation, superparamagnetism, and high surface area. This review is designed to report the recent progress of natural polymeric Fe3O4 magnetic nanoparticles in drug delivery applications, based on different polymers' origins.

Inducible plasmid copy number control for synthetic biology in commonly used E. coli strains

The ability to externally control gene expression has been paradigm shifting for all areas of biological research, especially for synthetic biology. Such control typically occurs at the transcriptional and translational level, while technologies enabling control at the DNA copy level are limited by either (i) relying on a handful of plasmids with fixed and arbitrary copy numbers; or (ii) require multiple plasmids for replication control; or (iii) are restricted to specialized strains. To overcome these limitations, we present TULIP (TUnable Ligand Inducible Plasmid): a self-contained plasmid with inducible copy number control, designed for portability across various Escherichia coli strains commonly used for cloning, protein expression, and metabolic engineering. Using TULIP, we demonstrate through multiple application examples that flexible plasmid copy number control accelerates the design and optimization of gene circuits, enables efficient probing of metabolic burden, and facilitates the prototyping and recycling of modules in different genetic contexts.

Application of Hydrogels as Carrier in Tumor Therapy: A Review

Cancer is one of the most intractable diseases in the world because of its high recurrence rate, high metastasis rate and high lethality rate. Traditional chemotherapy, radiotherapy and surgery have unsatisfactory therapeutic effects and cause many severe side effects at the same time. Hydrogel is a new type of biomaterial with the advantages of good biocompatibility and easy degradation, which can be used as a carrier of functional nanomaterials for tumor therapy. Herein, we represent the progress of hydrogels with different skeletons and their application as carrier in tumor treatment. The hydrogels are listed as polyethylene glycol-based hydrogels, chitosan-based hydrogels, peptide-based hydrogels, hyaluronic acid-based hydrogels, steroid-based hydrogels and other hydrogels by skeletons, and their properties, modifications and toxicities were introduced. Some representative applications of combined hydrogels with nanomaterial for chemotherapy, photodynamic therapy, photothermal therapy, sonodynamic therapy, chemodynamic therapy and synergistic therapy are highlighted.

Characterization of pH-responsive high molecular-weight chitosan/poly (vinyl alcohol) hydrogel prepared by gamma irradiation for localizing drug release

pH-sensitive hydrogels prepared by gamma irradiation find promising biological applications, partially, in the field of localized drug liberation. Herein, optimal conditions for fabricating high-molecular-weight chitosan/polyvinyl alcohol hybrid hydrogels using gamma irradiation at 10, 25, and 30 kGy were investigated by studying the water uptake behavior, the pore size on the surface, and thermal stability. Furthermore, the crosslinking mechanism of irradiated hydrogels was examined via solid-state 13C NMR spectrum. The swelling ratio of the gamma-irradiated CS/PVA hydrogel was pH-dependent; particularly, the hybrid hydrogel exhibited high swelling ratios under acidic conditions than those under basic conditions due to the protonation of amino groups on CS-backbone in acidic environments. In addition, amoxicillin was used as a model drug in the in vitro drug release investigations in pH-simulated gastric fluid and deionized water at 37 °C. To identify the drug release mechanism, several kinetic models composing zero-order, first-order, Higuchi, Hixson-Crowell, and Korsmeyer-Peppas models were used. The findings suggested that drug release is mediated by a non-Fickian transport mechanism.

Self-Healing Injectable Hydrogels for Tissue Regeneration

Biomaterials with the ability to self-heal and recover their structural integrity offer many advantages for applications in biomedicine. The past decade has witnessed the rapid emergence of a new class of self-healing biomaterials commonly termed injectable, or printable in the context of 3D printing. These self-healing injectable biomaterials, mostly hydrogels and other soft condensed matter based on reversible chemistry, are able to temporarily fluidize under shear stress and subsequently recover their original mechanical properties. Self-healing injectable hydrogels offer distinct advantages compared to traditional biomaterials. Most notably, they can be administered in a locally targeted and minimally invasive manner through a narrow syringe without the need for invasive surgery. Their moldability allows for a patient-specific intervention and shows great prospects for personalized medicine. Injected hydrogels can facilitate tissue regeneration in multiple ways owing to their viscoelastic and diffusive nature, ranging from simple mechanical support, spatiotemporally controlled delivery of cells or therapeutics, to local recruitment and modulation of host cells to promote tissue regeneration. Consequently, self-healing injectable hydrogels have been at the forefront of many cutting-edge tissue regeneration strategies. This study provides a critical review of the current state of self-healing injectable hydrogels for tissue regeneration. As key challenges toward further maturation of this exciting research field, we identify (i) the trade-off between the self-healing and injectability of hydrogels vs their physical stability, (ii) the lack of consensus on rheological characterization and quantitative benchmarks for self-healing injectable hydrogels, particularly regarding the capillary flow in syringes, and (iii) practical limitations regarding translation toward therapeutically effective formulations for regeneration of specific tissues. Hence, here we (i) review chemical and physical design strategies for self-healing injectable hydrogels, (ii) provide a practical guide for their rheological analysis, and (iii) showcase their applicability for regeneration of various tissues and 3D printing of complex tissues and organoids.

Lactic acid production from food waste hydrolysate by Lactobacillus pentosus: Focus on nitrogen supplementation, initial sugar concentration, pH, and fed-batch fermentation

Lactic acid production from food waste via fermentation is environmentally sustainable. However, the characteristics of food waste fermentation to produce lactic acid are not well understood due to the complexity of food waste. This study aims to understand the effects of key variables on the characteristics of food waste fermentation to maximize lactic acid production. Food waste was enzymatically hydrolyzed and fermented by Lactobacillus pentosus. Key fermentation variables, including nitrogenous nutrient supplementation, initial sugar concentration, and pH, were investigated in batch fermentation to unveil their effects on fermentation titer, yield, and productivity. The results showed that supplementation of 0.25% (w/v%) yeast extract and peptone to the food waste fermentation media significantly improved fermentation titer and productivity, but further increase in the supplementation level did not improve fermentation. Increasing the initial sugar concentration from 40 g/L to 100 g/L increased the fermentation titer from 41.0 g/L to 93.0 g/L and productivity from 0.34 g/L/h to 0.76 g/L/h. pH 6.0 was the optimal pH for the fermentation. At the optimal conditions, food waste fermentation resulted in the highest fermentation titer, yield, and productivity of 106.7 g/L, 1.12 g/g, and 3.09 g/L/h, respectively. The high fermentation yield of 1.12 g/g might be explained by the extra lactic acid production from unidentified compounds in food waste hydrolysates. By applying fed-batch fermentation, the lactic acid concentration reached 157.0 g/L with a yield and overall productivity of 0.92 g/g and 2.0 g/L/h, respectively. Based on the mass balance, a total of 251 kg lactic acid was produced from 1000 kg food waste. PRACTICAL APPLICATION: Food waste is one of the largest municipal solid wastes in the US, and most food waste ends up in landfills, causing significant economic losses and environmental concerns. In this study, we developed a fermentation process to convert food waste into biorenewable lactic acid and demonstrated that food waste is a superior feedstock for fermentation due to its embedded nutrients. Moreover, due to the embedded nutrients in food waste, the supplementation of yeast extract and peptone to fermentation can be reduced by over 50%, which can reduce the operating cost of lactic acid fermentation on an industrial scale.

Recent Advances of Stimuli-Responsive Polysaccharide Hydrogels in Delivery Systems: A Review

Hydrogels obtained from natural polymers have received widespread attention for their excellent biocompatible property, nontoxicity, easy gelation, and functionalization. Polysaccharides can regulate the gut microbiota and improve the intestinal microenvironment, thus exerting the healthy effect of intestinal immunity. In an active substance delivery system, the extent and speed of the substance reaching its target are highly dependent on the carrier. Thus, the smart active substance delivery systems are gradually increasing. The smart polysaccharide-hydrogels possess the ability in response to external stimuli through changing their volume phase and structure, which are applied in various fields. Natural polysaccharide-based hydrogels possess excellent characteristics of environmental friendliness, good biocompatibility, and abundant sources. According to the response type, natural polysaccharide-based hydrogels are usually divided into stimulus-responsive hydrogels, including internal response (pH, temperature, enzyme, redox) and external response (light, electricity, magnetism) hydrogels. The delivery system based on polysaccharides can exert their effects in the gastrointestinal tract. At the same time, polysaccharides may also take part in regulating the brain signals through the microbiota-gut-brain axis. Therefore, natural polysaccharide-hydrogels are considered as promising biomaterials, which can be designed as delivery systems for regulating the gut-brain axis. This article reviews the research advance of stimulus-responsive hydrogels, which focus on the types, response characteristics, and applications for polysaccharide-based smart hydrogels as delivery systems.

Sulfobetaine polymers for effective permeability into multicellular tumor spheroids (MCTSs)

Multicellular tumor spheroids (MCTSs) are attractive for drug screening before animal tests because they emulate an in vivo microenvironment. The permeability of the MCTSs and tumor tissues towards the candidate drugs is not sufficient even though the drugs can penetrate monolayer cultured cells; therefore, nanocarriers are required to enhance permeability and deliver drugs. In this study, we prepared zwitterionic polymers of sulfobetaine methacrylates and (meth)acrylamides with or without hydroxy groups between the zwitterions to serve as highly permeable nanocarriers. In the sulfobetaine polymers, poly(2-hydroxy-3-((3-methacrylamidopropyl)dimethylammonio)propane-1-sulfonate), P(OH-MAAmSB), the hydroxy group containing methacrylamide polymer exhibited little cytotoxicity and membrane translocation ability against monolayer cultured cells. Moreover, the excellent permeability of the hepatocyte MCTS enabled P(OH-MAAmSB) to permeate it and reach the center region (∼325 μm in diameter) at approximately 150 s, although poly(trimethyl-2-methacroyloxyethylammonium), a cationic polymer, penetrated just 1 to 2 layers from the periphery. The superior permeability of P(OH-MAAmSB) might be due to its good solubility and side chain conformation. P(OH-MAAmSB) is a promising nanocarrier with membrane translocation and permeability.

Smart near infrared-responsive nanocomposite hydrogels for therapeutics and diagnostics

Nanocomposite (NC) hydrogels are emerging biomaterials that possess desirable and defined properties and functions for therapeutics and diagnostics. Particularly, nanoparticles (NPs) are employed as stimulus-transducers in NC hydrogels to facilitate the treatment process by providing controllable structural change and payload release under internal and external simulations. Among the various external stimuli, near-infrared (NIR) light has attracted considerable interest due to its minimal photo-damage, deep tissue penetration, low auto-fluorescence in living systems, facile on/off switch, easy remote and spatiotemporal control. In this study, we discuss four types of transducing nanomaterials used in NIR-responsive NC hydrogels, including metal-based nanoparticles, carbon-based nanomaterials, polydopamine nanoparticles (PDA NPs), and upconversion nanoparticles (UCNPs). This review provides an overview of the current progress in NIR-responsive NC hydrogels, focusing on their preparation, properties, applications, and future prospects.

Facilitated and Controlled Strontium Ranelate Delivery Using GCS-HA Nanocarriers Embedded into PEGDA Coupled with Decortication Driven Spinal Regeneration

BACKGROUND AND PURPOSE

Strontium ranelate (SrR) is an oral pharmaceutical agent for osteoporosis. In recent years, numerous unwanted side effects of oral SrR have been revealed. Therefore, its clinical administration and applications are limited. Hereby, this study aims to develop, formulate, and characterize an effective SrR carrier system for spinal bone regeneration.

METHODS

Herein, glycol chitosan with hyaluronic acid (HA)-based nanoformulation was used to encapsulate SrR nanoparticles (SrRNPs) through electrostatic interaction. Afterward, the poly(ethylene glycol) diacrylate (PEGDA)-based hydrogels were used to encapsulate pre-synthesized SrRNPs (SrRNPs-H). The scanning electron microscope (SEM), TEM, rheometer, Fourier-transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS) were used to characterize prepared formulations. The rabbit osteoblast and a rat spinal decortication models were used to evaluate and assess the developed formulation biocompatibility and therapeutic efficacy.

RESULTS

In vitro and in vivo studies for cytotoxicity and bone regeneration were conducted. The cell viability test showed that SrRNPs exerted no cytotoxic effects in osteoblast in vitro. Furthermore, in vivo analysis for new bone regeneration mechanism was carried out on rat decortication models. Radiographical and histological analysis suggested a higher level of bone regeneration in the SrRNPs-H-implanted groups than in the other experimental groups.

CONCLUSION

Local administration of the newly developed formulated SrR could be a promising alternative therapy to enhance bone regeneration in bone-defect sites in future clinical applications.

Utilizing Edible Agar as a Carrier for Dual Functional Doxorubicin-Fe3O4 Nanotherapy Drugs

The purpose of this study was to use agar as a multifunctional encapsulating material to allow drug and ferromagnetism to be jointly delivered in one nanoparticle. We successfully encapsulated both Fe3O4 and doxorubicin (DOX) with agar as the drug carrier to obtain DOX-Fe3O4@agar. The iron oxide nanoparticles encapsulated in the carrier maintained good saturation of magnetization (41.9 emu/g) and had superparamagnetism. The heating capacity test showed that the specific absorption rate (SAR) value was 18.9 ± 0.5 W/g, indicating that the ferromagnetic nanoparticles encapsulated in the gel still maintained good heating capacity. Moreover, the magnetocaloric temperature could reach 43 °C in a short period of five minutes. In addition, DOX-Fe3O4@agar reached a maximum release rate of 85% ± 3% in 56 min under a neutral pH 7.0 to simulate the intestinal environment. We found using fluorescent microscopy that DOX entered HT-29 human colon cancer cells and reduced cell viability by 66%. When hyperthermia was induced with an auxiliary external magnetic field, cancer cells could be further killed, with a viability of only 15.4%. These results show that agar is an efficient multiple-drug carrier, and allows controlled drug release. Thus, this synergic treatment has potential application value for biopharmaceutical carrier materials.

Inhibitory effect of caffeic acid on advanced glycation end product-induced renal fibrosis in vitro: A potential therapeutic target

Advanced glycation end products (AGEs) are formed from amino acids and reducing sugars through nonenzymatic Maillard reaction. AGEs are known to induce oxidative stress, which may cause fibrosis or cancer. In this study, we investigated the protective effect of caffeic acid (CA) on AGE-mediated kidney epithelial to mesenchymal transition (EMT) in human HK-2 cells. Exposure to 100 µg/mL of AGEs by kidney epithelial cells raised the production of reactive oxygen species by 5.2-fold and decreased levels of glutathione. In addition, cardamonin, a β-catenin inhibitor, was used to determine the signaling pathway for β-catenin in which cardamonin inhibited the AGEs-induced translocation of β-catenin into the nucleus, resulting in an inhibition of the EMT process. Similarly, our findings showed that, close to the control level, CA treatment decreased AGE-mediated oxidative stress, loss of E-cadherin expression, and overexpression of α-smooth muscle actin and fibronectin by inactivation of the β-catenin pathway. Furthermore, AGE treatment enhanced the expression of collagen type I (1.99-fold) as well as the activity of metalloproteinases 2 (1.86-fold) and 9 (2.79-fold), but such increase was inhibited by the pretreatment of CA. In conclusion, this study determined the inhibitory effect of CA on AGE-induced β-catenin signaling, which prevented the occurrence of EMT in kidney epithelial cells. This suggests that CA may be a potential target for AGE-induced renal fibrosis. PRACTICAL APPLICATION: Exposure of kidney epithelial cells to advanced glycation end products (AGEs) leads to a rise in reactive oxygen species and a decrease in glutathione, thereby increasing oxidative stress that may cause fibrosis. However, treatment of kidney cells with caffeic acid (CA) prior to their exposure to AGEs lowers oxidative stress and decreases fibrosis. This research reveals the beneficial influence of CA on renal fibrosis in laboratory-cultured kidney cells (in vitro), which makes CA a potential therapeutic target for AGE-induced fibrosis.

Parametric optimization and kinetic study of l-lactic acid production by homologous batch fermentation of Lactobacillus pentosus cells

Parametric optimization always plays important roles in bioengineering systems to obtain a high product yield under the proper conditions. The parametric conditions of lactic acid production by homologous batch fermentation of Lactobacillus pentosus cells was optimized by the Box-Behnken design. The highest l-lactic acid yield was obtained as 0.836 ± 0.003 g/g glucose with the productivity of 0.906 ± 0.003 g/(L × H) under the optimum conditions of 34.7 °C, pH 6.2, 148 rpm agitation speed, and 9.3 g/L nitrogen source concentration determined by quadratic response surface with high accuracy. The adequate kinetic models of cell growth rate, lactic production rate, and glucose consumption rate were also established to describe the fermentation behavior of L. pentosus cells with the correlation coefficients of 09985, 0.9990, and 0.9989, respectively.