Recent advances and perspectives in efforts to reduce the production and application cost of microbial flocculants

Enhanced consolidation and removal of accumulated flocculants in dredged soil via leaching with vacuum preloading

The vacuum preloading coupling flocculation treatment is a widely employed method for reinforcing soils with high water content in practical construction. However, uneven distribution and accumulation of flocculants pose significant damage to the soil environment and result in uneven soil consolidation, leading to severe issues in subsequent soil development and exploitation. To address these concerns, an evolved leaching with vacuum method is developed for facilitating soil consolidation while preventing the accumulation of flocculant in the soil. In this study, five model tests are conducted in which FeCl3 is chosen as the typical flocculant to promote soil consolidation, and deionized water is used for leaching. The final discharged water, settlement, water content and penetration resistance of soil are obtained to evaluate the soil reinforcement effect, while the flocculant removal effect is evaluated by the Fe3+ content in the filtrate and soil. The comprehensive reinforcement and flocculant removal effect show that this method is extremely effective compared to traditional vacuum preloading. The two leaching is clarified as the best choice, resulting in a 22% decrease in the soil water content and a 25% in soil penetration resistance, meanwhile a 12.8% removal rate of the flocculant. The test results demonstrate that leaching with vacuum preloading can contribute to promoting soil consolidation and reducing the accumulation of flocculant in the soil, ensuring the safe and eco-friendly use of the soil for future applications. The conclusions obtained are of significant theoretical value and technical support for practical construction and sustainable development.

Fractionation of Extracellular Polymeric Substances by Aqueous Three-Phase Partitioning Systems

Extracellular polymeric substances (EPS) are natural polymers secreted by microorganisms and represent a key chemical for the development of a range of circular economy applications. The production of EPS comes with notable challenges such as downstream processing. In this work, a three-phase partitioning (TPP) system was investigated as a fractionation technique for the separation of polysaccharides and proteins, both present in the EPS culture broth. The effect of the type of phase-forming compounds (alcohol, polymer, or ionic liquid, in combination with salt) and its concentration were evaluated and compared to the results previously obtained with model systems. The recyclability of phase-forming compounds used to form the fractionation platform was assessed by ultrafiltration. The best fractionation of EPS was achieved using a TPP system composed of 23 wt % ethanol and 25% K3C6H5O7 as 82% EPS-PS partitioned to the salt-rich/bottom phase, and 76% EPS-PN was recovered as an interfacial precipitate, which could be readily resolubilized in water. This represented an increase of 1.24 and 2.83-fold in the purity of EPS-PS and EPS-PN, respectively, in relation to the initial feed concentration. Finally, high recovery yields of phase-forming compounds (>99%) and fractionated EPS (>80%) were obtained using ultrafiltration/diafiltration (UF/DF) as the regeneration technique. The substantial fractionation yields, selectivity, and recyclability of the phase-forming compounds confirm the potential of TPP systems in combination with UF/DF as the separation method for real biopolymer mixtures. Key contributions of this study include the demonstration of the applicability of a readily scalable and cost-effective separation technique for the fractionation of EPS from real EPS-containing broths, while also the limitations of prescreening with model systems became clear through the observed deviating trends between model system studies and real broth studies.

Bioflocculation characteristics of bound extracellular polymers substances from Pseudomonas sp. XD-3 and behavior of polysaccharides

This study aimed to investigate the bioflocculation characteristics of bound extracellular polymers substances (B-EPS), which were extracted from Pseudomonas sp. XD-3. The flocculation efficiency of B-EPS achieved about 80%- 95% with an initial pH of 4-7, kaolin concentrations of 3-7 g L-1, temperature of 25-100 ℃ and B-EPS dosage of 9-105 mg L-1. The bioflocculation process of B-EPS conformed to pseudo-second-order kinetic mode, suggesting that the bioflocculation belonged to chemical adsorption process. Enzymatic hydrolysis experiments demonstrated that both polysaccharides and proteins were active components for bioflocculation. The polysaccharides were irregular aggregates with rough and porous surfaces and contained hydroxyl and carboxyl groups, which helped to promote bridging effect. Ribose, glucose and galactose were the main monosaccharides of polysaccharides. The molecular weight of the polysaccharides was relatively small, but the relatively loose configuration exposed more ion bridging sites, thus promoting the bioflocculation. Optimizing the ingredients of culture medium and culture time for B-EPS were effective strategies to increase the yield of flocculation active components. When the conditions were 10% of 2 g L-1 KH2PO4 + 5 g L-1 K2HPO4, 0.05% of Tween-80, citrate as carbon source and 32-48 h of culture time, both proteins and polysaccharides in B-EPS were significantly improved. This study gives an in-deep understanding on the flocculation characteristics of a novel bioflocculant from Pseudomonas sp. XD-3, which is conducive to the widespread application of bioflocculation.

Characterization and bioactivity analysis of a heteropolysaccharide purified from Paenibacillus edaphicus strain UJ1

Many polysaccharides produced by Paenibacillus spp. have attractive properties, such as rheological modification and immunomodulation. However, properties of P. edaphicus polysaccharides are not understood sufficiently. Here, the polysaccharide (PUM) was obtained from P. edaphicus strain UJ1 by batch fermentation, and the chemical characteristics, rheological and anti-inflammatory properties of PUM and its sulfate derivative (PUM-S) were investigated. The results indicated that PUM was a typical shear-thinning biopolymer with an estimated weight average molecular weight of 2.45 × 10⁷ Da. PUM molecule consisted of D-Man, D-GlcA, D-Glc, D-Gal, and L-Fuc with the molar ratio of 3.00:1.07:3.21:0.81:0.76. It had the backbone → 3)-β-D-Man-(1 → 3)-β-D-Glc-(1 → 3)-β-D-Man-(1 → 3)β-D-Glc-(1 → 4)-β-D-GlcA-(1 → 3)-β-D-Man-(1 → and two side chains, namely, pyruvoyl-Glc-(1→ and β-L-Fuc-(1 → 3)-β-D-Gal-(1→. Moreover, PUM-S was prepared by SO₃-pyridine method and had the weight average molecular weight of 1.42 × 10⁵ Da. The bioactivity of PUM and PUM-S was analyzed in vitro in RAW 264.7 cells. The results indicated that both PUM and PUM-S facilitated cell proliferation at 50-500 μg/mL. Besides, PUM-S showed potential anti-inflammatory effect in the LPS-induced cells. According to transcription and molecular dynamics analyses, PUM-S expressed its activity probably by interacting with the Toll-like receptor 4. In general, P. edaphicus produced a polysaccharide with new chemical structure and promising rheological and bioactive properties.

Isolation of a Marine Bacterium and Application of Its Bioflocculant in Wastewater Treatment

Bioflocculation has become the method of choice in wastewater treatment because of its effectiveness, environmental friendliness and innocuousness to humans. In this study, the bioflocculant-producing bacterium was isolated and its bioflocculant was used in wastewater treatment. The isolate was identified by 16S rRNA gene sequencing analysis. Its culture conditions (inoculum size, carbon and nitrogen sources, pH, temperature and time) were optimised using the one-factor-at-a-time assay. The cytotoxicity of the bioflocculant was assessed on human colorectal adenocarcinoma cells (Caco2) by tetrazolium-based colorimetric method. The ability of the bioflocculant to reduce biochemical oxygen demand (BOD) and chemical oxygen demand (COD) in wastewater was evaluated using Jar test. The bacterium was identified as Bacillus subtilis CSM5 and the maximum flocculating activity of 92% was observed when fructose and urea were used as nutrients and the culture conditions were adjusted to 30 °C, pH 9, 160 rpm and 72 h of incubation. Caco2 exhibited 90% viability when the highest bioflocculant concentration of 200 µg/µL was used. The reduction of BOD and COD was achieved at 59 ± 3.1 and 75 ± 0.4%, respectively. In conclusion, B. subtilis CSM5 is a good candidate for bioflocculant production and its bioflocculant has good potential for use in wastewater treatment.

Sludge dewaterability enhancement under low temperature condition with cold-tolerant Bdellovibrio sp. CLL13

The dewatering performance of waste activated sludge (WAS) is generally deteriorated under low temperature due to the increase of viscosity, which would exacerbate the difficulties in sludge treatment and disposal. In this study, the cold-tolerant Bdellovibrio sp. CLL13 was successfully screened for efficient sludge biolysis, and it dramatically improved the sludge dewaterability while no significant biolysis effects were observed for the mesophilic BALO strain at 12 °C. The reduction rates of the sludge capillary suction time (CST), the specific resistance of filtration (SRF), the sludge dry weight, and the fecal coliform bacteria concentration at the optimal reaction time of 14 h were 40.1 ± 0.2%, 69.6 ± 0.7%, 7.7 ± 0.4%, and 78.5 ± 0.4%, respectively, when the mixed liquid suspended solids (MLSS) content was between 10.8 and 29.6 g/L, the input dosage of CLL13 was 8.8 × 10⁶ PFU/mL sludge, and the DO level was 1.2 mg/L. Meanwhile, the viscosity reduction rate, the relative hydrophobicity increasement rate, and the bound water reduction rate were 20.3 ± 1.2%, 6.9 ± 0.7%, and 29.4 ± 1.0%, respectively. The ratios of protein content to polysaccharides content in the extracellular polymeric substances (EPS) decreased significantly. In addition, the degradation of the macromolecular substances in EPS and the increase of the soluble chemical oxygen demand, the total nitrogen, the total phosphorus, and the lactate dehydrogenase levels were observed. Therefore, the cold-tolerant CLL13 induced the sludge biolysis and compromised the negative effects of low temperature on the sludge dewatering performance, which should be beneficial for the efficient WAS biolysis treatment application in the near future under low temperature.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.