Hydrodynamic cavitation for lignocellulosic biomass pretreatment: a review of recent developments and future perspectives

Hydrodynamic cavitation-assisted acid pretreatment and fed-batch simultaneous saccharification and co-fermentation for ethanol production from sugarcane bagasse using immobilized cells of Scheffersomyces parashehatae

A new alternative for hydrodynamic cavitation-assisted pretreatment of sugarcane bagasse was proposed, along with a simultaneous saccharification and co-fermentation (SSCF) process performed in interconnected columns. Influential variables in the pretreatment were evaluated using a statistical design, indicating that an ozone flow rate of 10 mg min-1 and a pH of 5.10 resulted in 86 % and 72 % glucan and xylan hydrolysis yields, respectively, in the subsequent enzymatic hydrolysis process. Under these optimized conditions, iron sulfate (15 mg L-1) was added to assess Fenton pretreatment, resulting in glucan and xylan hydrolysis yields of 92 % and 71 %, respectively, in a material pretreated for 10 min. In SSCF, ethanol volumetric productivities of 0.33 g L-1 h-1 and of 0.54 g L-1 h-1 were obtained in batch and fed-batch operation modes, achieving 26 g L-1 of ethanol in 48 h in the latter mode.

Pretreatment of herbal waste using sonication

The effect of hydrodynamic cavitation (HC) and the manner it affects the biodegradability of herbal waste suspended on municipal wastewater subjected to mechanical pre-treatment was examined in this paper. The HC was performed at an optimal inlet pressure equal to 3.5 bar and with the cavitation number of 0.11; the number of recirculation passes through the cavitation zone amounted to 30.5. The BOD₅/COD ratio was enhanced by more than 70% between the 5th and 10th minute of the process, indicating the enhanced biodegradability of herbal waste shortly. Fiber component analysis, FT-IR/ATR, TGA and SEM analysis were conducted to check the findings and to demonstrate changes in the chemical and morphological structure of herbal waste. It confirmed that hydrodynamic cavitation visibly influenced the herbal composition and their structural morphology, decreased hemicellulose, cellulose and lignin content, but did not form the by-products affecting the subsequent biological treatment of herbal waste.

Mitigation of carbon steel biocorrosion using a green biocide enhanced by a nature-mimicking anti-biofilm peptide in a flow loop

Biocorrosion, also called microbiologically influenced corrosion (MIC), is a common operational threat to many industrial processes. It threatens carbon steel, stainless steel and many other metals. In the bioprocessing industry, reactor vessels in biomass processing and bioleaching are prone to MIC. MIC is caused by biofilms. The formation and morphology of biofilms can be impacted by fluid flow. Fluid velocity affects biocide distribution and MIC. Thus, assessing the efficacy of a biocide for the mitigation of MIC under flow condition is desired before a field trial. In this work, a benchtop closed flow loop bioreactor design was used to investigate the biocide mitigation of MIC of C1018 carbon steel at 25 °C for 7 days using enriched artificial seawater. An oilfield biofilm consortium was analyzed using metagenomics. The biofilm consortium was grown anaerobically in the flow loop which had a holding vessel for the culture medium and a chamber to hold C1018 carbon steel coupons. Peptide A (codename) was a chemically synthesized cyclic 14-mer (cys-ser-val-pro-tyr-asp-tyr-asn-trp-tyr-ser-asn-trp-cys) with its core 12-mer sequence originated from a biofilm dispersing protein secreted by a sea anemone which possesses a biofilm-free exterior. It was used as a biocide enhancer. The combination of 50 ppm (w/w) THPS (tetrakis hydroxymethyl phosphonium sulfate) biocide + 100 nM (180 ppb by mass) Peptide A resulted in extra 1-log reduction in the sulfate reducing bacteria (SRB) sessile cell count and the acid producing bacteria (APB) sessile cell count compared to 50 ppm THPS alone treatment. Furthermore, with the enhancement of 100 nM Peptide A, extra 44% reduction in weight loss and 36% abatement in corrosion pit depth were achieved compared to 50 ppm THPS alone treatment.

From pomiculture waste to biotechnological raw material: efficient transformation using ligninosomes and cellulosomes from Pleurotus spp

The goal of this study was to determine the capacity of Pleurotus spp. lignocellulosome to transform frequent pomiculture residues (grapevine-, plum-, and raspberry sawdust) into raw materials for biotechnological processes. All three lignocellulosics induced the synthesis of ligninolytic and cellulolytic enzymes in the tested species. Laccase was dominant in the ligninolytic cocktail, with a maximum activity of 40,494.88 U L-1 observed after the cultivation of P. pulmonarius on grapevine sawdust. Grapevine sawdust also proved to be the optimal substrate for the synthesis of versatile peroxidases especially in P. eryngii (1010.10 U L-1), while raspberry sawdust favored the production of Mn-dependent peroxidase in P. pulmonarius (479.17 U L-1). P. pulmonarius was the dominant cellulolytic agent and raspberry sawdust was optimal for the synthesis of xylanases, and endo- and exo-cellulases (15,746.35 U L-1, 9741.56 U L-1, and 836.62 U L-1), while grapevine sawdust mostly induced β-glucosidase activity (166.11 U L-1). The degree of residues delignification was more substrate- than species-dependent, ranging between 6.44 and 23.72% after the fermentation of grapevine and raspberry sawdust with P. pulmonarius. On the other hand, the lowest level of cellulose consumption was also observed on raspberry sawdust after the cultivation of P. eryngii, which together with high delignification also induced the highest selectivity index (1.27). The obtained results show the exceptional lignocellulolytic potential of Pleurotus spp. enzyme cocktails which opens up many possibilities for their application in numerous biotechnological processes.