Removal of heavy metal chromium from tannery effluent using ultrafiltration membrane

CeO2@PU sandwiched in chitosan and cellulose acetate layer as Cs-CeO2@PU-CA triple-layered membrane for chromium removal

The single or blended polymer membrane lacks a few advantages based on the durability of the membrane. The novel triple-layered sandwich membrane Cs-CeO₂@PU-CA membrane is cast through the phase inversion technique for chromium removal. This approach involves an arrangement of the top layer as chitosan which acts as a protective layer, and the sandwich layer of CeO₂@PU membrane which acts as source for stability, and a supportive layer of cellulose acetate is arranged accordingly. The incorporation of cerium oxide nanoparticles into the polyurethane can create pores on the surface of the membrane due to the high aspect ratio of cerium oxide. The triple-layered arrangement shows higher porosity via water contact angle, the network of pores present on the membrane which is visible through morphology, and also the intermediate sandwich layer CeO₂@PU provided with better mechanical strength which would be significant for changes achieved in adsorption technique. The batch adsorption was carried out with various ppm of Cr(VI) solution. The effect of pH, contact time, initial concentration, and temperature were analyzed and optimized for determining efficiency of chromium removal. Furthermore, the suitable adsorption isotherm and kinetics of the system were also determined for better fit via Langmuir, Freundlich, Temkin, and Sips along with pseudo-first-order and pseudo-second-order. The efficiency in adsorption is due to the prominent presence of hydroxyl, carboxyl, and hydrophilic group in the prepared membrane. Thus, the resultant prepared membrane can act as a potential chromium removal substrate.

Removal of hazardous ions from aqueous solutions: Current methods, with a focus on green ion flotation

Hazardous ions, like those of heavy metals, cause significant health and environmental problems when they are discharged into water resources naturally or through various industrial processes. Removing these ions from water is of significant importance in the provision of high-quality water for drinking and agricultural usage. This work discusses current techniques that are frequently used for the removal of heavy-metal ions from aqueous solutions by absorption, particularly the use of biodegradable surfactants in ion flotation. Certain new surfactants promise high efficiency in their use in the ion-flotation process and in their application in industrial-water treatment to remove heavy metals. As an example, this work demonstrates the high efficiency of surfactants based on an amino-acid (L-cysteine) in removing a range of heavy-metal ions in a simple, single-stage ion-flotation process. High foaming ability, the ability to operate in various temperatures and pHs, decomposing into natural products and high binding affinity for heavy-metal ions make the cysteine-based surfactants a highly suitable compound to replace current commercial surfactants in ion- and froth-flotation processes. Removal of particular ions can also be achieved in ion flotation; a suitable choice of parameters, such as pH and surfactant concentration, favours the surfactant binding to those ions. Further intensive work is required to develop an optimal process to recover valuable elements from waste solutions.

Green Blends Based on Ionic Liquids with Improved Performance for Membrane Technology: Perspectives for Environmental Applications

Present research was directed towards the development of new high-performance and cost-effective polysulfone membranes (PSFQ) by introducing ionic liquids (ILs—Cyphos 101 IL and Aliquat 336) into their matrix. Variation of ILs was performed with the aim to find the one that brings new properties and improves the functionality and selectivity of PSFQ membranes in ultrafiltration processes. Based on the obtained results of the rheological study, we established the compatibility of compounds and optimal content of the used ILs, namely 3 wt% and 15 wt% Cyphos 101 IL and compositions varying between 3 and 15 wt % Aliquat 336. Results indicated that the ILs acted as plasticizers when they were added to the system, a helpful aspect in processing membranes used in water decontamination. The efficiency and performance of the membranes were evaluated by their use in the treatment of diclofenac (DCF)-containing waters. Membranes obtained from PSFQ/Aliquat 336 solution containing 15 wt% IL exhibited a 97% removal degree of DCF in the treatment process of 50 mL solution containing 3 mg/L DCF. The separation efficiency was kept constant for four filtration/cleaning cycles. The results indicated an improvement in membrane performance as the amount of IL in their structure increased, which confirms the potential for application in water treatment processes.

Removal of Contaminants from Water by Membrane Filtration: A Review

Drinking water sources are increasingly subject to various types of contamination due to anthropogenic factors and require proper treatment to remove disease-causing agents. Public drinking water systems use different treatment methods to provide safe and quality drinking water to populations. However, they are ineffective in removing contaminants that are considered a danger to the environment and therefore to humans. Several alternative treatment processes have been proposed, such as membrane filtration, as final purification methods. This paper aims to summarize the type of pollutant compounds, filtration processes, and membranes that have been most studied in this area with particular emphasis on how the modification of membranes, either the manufacturing process or the incorporation of nanomaterials, influences their performance.

Process intensification through waste fly ash conversion and application as ceramic membranes: A review

Improper disposal of huge quantities of fly ash generated by thermal power plants and few other industries contributes to both air and water pollution, and therefore, recent advancements in research are focused toward utilizing this waste material in fabricating useful membranes. This article presents an overview of various methods used to fabricate fly ash-based membranes and critical parameters affecting the same. Fly ash-based membranes also act as the support for fabricating composite membranes and therefore, different means of coating the support membranes are discussed in this paper. Among various methods of membrane fabrication, extrusion method can be considered for bulk production of membranes, which is a pre-requisite for industrial implementation. The article also throws light on a wide range of wastewater that have been successfully treated using these fly ash-based ceramic membranes. However, the use of these membranes should be avoided in acidic solutions as it may cause leaching of heavy metals present in fly ash, causing health hazards. Most of these membranes function on the basis of size exclusion principle, whereas membranes with charge-based separation are also well known. Both of these types of membranes are discussed in this work. Utilization of fly ash-based membranes in separation processes not only reduce the cost associated with the process, but will also intensify the process through various other means such as reduced energy consumption, environmental safety and so on. Thus, the main focus of this review is to present the readers with development and important future directions in this research topic.

Green Reduction of Graphene Oxide using Kaffir Lime Peel Extract (Citrus hystrix) and Its Application as Adsorbent for Methylene Blue

Green reduction of graphene oxide (GO) by phytochemicals was explored using the aqueous extract of kaffir lime peels. The research methods included preparation of extracts, preparation of GO, preparation and characterization of reduced-GO (RGO) using Fourier Transform Infrared (FTIR), X-ray diffraction (XRD), and UV-Vis spectroscopy, as well as methylene blue (MB) adsorption test using RGO. The RGO characterization showed that GO was successfully reduced by a C=C group restoration. The MB adsorption kinetics profile in RGO is more suitable for the pseudo-second-order model, whereas for the adsorption isotherm it is more suitable for the Langmuir model with a maximum adsorption capacity (q_max) of 276.06 mg/g at room temperature. The best ratio of GO: kaffir lime peel extract used to prepare RGO was at a ratio of 1: 2. Based on the ΔG, ΔH, and ΔS values, the adsorption of RGO-MB was defined as spontaneous and endothermic process. The results promise the potential application of RGO derived via green route to remove cationic dye in wastewater.

Surfactant-assisted hydrothermal synthesis of rGO/SnIn4S8 nanosheets and their application in complete removal of Cr(vi)

To solve the problem of contamination of hexavalent chromium (Cr(vi)), visible-light-driven graphene-based ternary metal chalcogenide nanosheets (rGO/SnIn₄S₈) were synthesized via a one-pot surfactant-assisted hydrothermal method for the photoreduction of Cr(vi). Characterizations demonstrated that SnIn₄S₈ nanosheets were uniformly distributed on the surface of rGO and the as-synthesized nanosheets exhibited excellent photocatalytic activity under visible light. In addition, the effects of pH, concentration of critic acid, holes and electron scavengers on the reduction of Cr(vi) were systematically investigated. It was found that 50 mg L⁻¹ of Cr(vi) could be completely removed within 30 min at pH 2 when citric acid served as a hole scavenger. Kinetic studies showed that the photocatalytic reduction of Cr(vi) processes obeyed the pseudo first order model. Further study indicated that the Cr(iii) species was immediately adsorbed onto the surface of the rGO/SnIn₄S₈ nanosheets after photocatalytic reduction of Cr(vi). Additionally, recycling results suggested that rGO/SnIn₄S₈ nanosheets possessed high recycle ability and stability after repeated use (5 times). This effective and promising work might provide a new strategy for the photoreduction of Cr(vi) and complete removal of chromium from effluent through the novel photocatalyst rGO/SnIn₄S₈.

Fabrication of visible-light-responsive photocatalyst (rGO/SnIn₄S₈) for photoreduction of Cr(vi) and adsorption of Cr(iii).