Toxicity characteristics of sewage treatment effluents and potential contribution of micropollutant residuals

The Importance of Humic Substances in Transporting "Chemicals of Emerging Concern" in Water and Sewage Environments

In this study, we examined the sorption of selected "chemicals of emerging concern" (CEC) on humic substances commonly found in water and municipal wastewater. These were ibuprofen, diclofenac, caffeine, carbamazepine, estrone, triclosan, bisphenol A, and isoproturon. The humic substances (HSs) were synthetic and not contaminated by the tested organic substances. The elemental composition and content of mineral micropollutants, gravimetric curves, and the IR spectrum of HSs were determined. We determined a relationship between the process efficiency and the characteristics of a sorbent and sorbate using the properties of organic substances sorbed on HSs. This relationship was confirmed by sorption tests on the HS complex, i.e., the HS-organic micropollutant. It has been shown that the given complexes have a greater affinity for hydrophobic surfaces than hydrophilic surfaces. To confirm the nature of the sorbent surfaces, we determined their zeta potential dependence on the pH of the solution. Studies have shown that HSs are carriers of both mineral substances and CEC in water and sewage environments.

Characterization of Slaughterhouse Wastewater and Development of Treatment Techniques: A Review

Commercialization in the meat-processing industry has emerged as one of the major agrobusiness challenges due to the large volume of wastewater produced during slaughtering and cleaning of slaughtering facilities. Slaughterhouse wastewater (SWW) contains proteins, fats, high organic contents, microbes, and other emerging pollutants (pharmaceutical and veterinary residues). It is important to first characterize the wastewater so that adequate treatment techniques can be employed so that discharge of this wastewater does not negatively impact the environment. Conventional characterization bulk parameters of slaughterhouse wastewater include pH, color, turbidity, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total organic carbon (TOC), total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), and coliform counts. Characterization studies conducted have revealed the effects of the pollutants on microbial activity of SWW through identification of toxicity of antibiotic-resistant strains of bacteria. Due to the high-strength characteristics and complex recalcitrant pollutants, treatment techniques through combined processes such as anaerobic digestion coupled with advanced oxidation process were found to be more effective than stand-alone methods. Hence, there is need to explore and evaluate innovative treatments and techniques to provide a comprehensive summary of processes that can reduce the toxicity of slaughterhouse wastewater to the environment. This work presents a review of recent studies on the characterization of SWW, innovative treatments and technologies, and critical assessment for future research.

Rhodosporidium toruloides and Tetradesmus obliquus Populations Dynamics in Symbiotic Cultures, Developed in Brewery Wastewater, for Lipid Production

In this work, primary brewery wastewater (PBWW) and secondary brewery wastewater (SBWW) separately, or mixed at the ratios of 1:1 (PBWW:SBWW) and 1:7 (PBWW:SBWW), with or without supplementation with sugarcane molasses (SCM), were used as culture media for lipid production by a mixed culture of the oleaginous yeast Rhodosporidium toruloides NCYC 921 and the microalgae Tetradesmus obliquus (ACOI 204/07). Flow cytometry was used to understand the dynamics of the two micro-organisms during the mixed cultures evolution, as well as to evaluate the physiological states of each micro-organism, in order to assess the impact of the different brewery effluent media composition on the microbial consortium performance. Both brewery wastewaters (primary and secondary) without supplementation did not allow R. toruloides heterotrophic growth. Nevertheless, all brewery wastewater media, with and without SCM supplementation, allowed the microalgae growth, although the yeast was the dominant population. The maximum total biomass concentration of 2.17 g L^-1 was achieved in the PBWW mixed cultivation with 10 g L^-1 of SCM. The maximum lipid content (14.86% (w/w DCW)) was obtained for the mixed culture developed on SBWW supplemented with 10 g L^-1 of SCM. This work demonstrated the potential of using brewery wastewater supplemented with SCM as a low-cost culture medium to grow R. toruloides and T. obliquus in a mixed culture for brewery wastewater treatment with concomitant lipid production.

Assessment of effluents quality through ecotoxicological assays: evaluation of three wastewater treatment plants with different technologies

The water quality of the effluents is mainly focused on physicochemical and microbiological parameters. However, the ecotoxicological assessments are crucial to ensure an effective water quality of the effluents. This work aims to assess the ecotoxicity of effluents originated from WWTPs with different wastewater treatment technologies. For that, effluent samples from three WWTPs with different treatment processes were seasonally collected. Physicochemical parameters were determined, the toxicity towards daphnia, protozoan, and microalgae organisms was evaluated, and data correlated. Toxicity assays showed different susceptibility of the organisms to the effluents and that toxicity is dependent on the season and wastewater treatment technology. No toxicity was observed to daphnia in winter and spring, but ~100% of mortality was observed in effluent from WWTP A in summer. Growth inhibition was observed for both protozoan and microalgae for all effluents and in all seasons with highest values in spring in WWTP C (~80%) for the protozoan while the highest microalgae growth inhibition percentage was observed for WWTP B in both spring (~80%) and summer (~80%). These results show that effluents might have negative impacts into their receiving water systems and highlight that a global assessment of effluent quality should include ecotoxicological assays to complement physicochemical and microbiological data for an operative environmental management of wastewater treatment plants.

Rationale for the Combined Use of Biological Processes and AOPs in Wastewater Treatment Tasks

This paper aims to form a unified concept of the integrated use of different wastewater treatment methods to form a resistant biological treatment stage of technological systems under the influence of such toxic factors as antibiotics and surfactants. The processes of mechanical treatment, ozonation, UV irradiation, and electrolytic anodic oxidation were implemented in an electrotechnological wastewater treatment facility. Wastewater treatment quality was determined by the concentration of nitrogen compounds in aqueous solutions according to the method of Lurie. Biodiagnostics of the investigated activated sludge via surfactant action was carried out at polyethylene oxide concentrations of 10, 30, and 50 mg/dm3. As a result of experiments on wastewater treatment after aquaculture, an improvement in the reduction of pollutants only by the indicator “nitrate concentration” was determined: by 20% after anodic oxidation, and by 15% after photolysis. At almost all surfactant concentrations studied, the activated sludge was not completely recovered, which was expressed in a decrease in its quantity and in the inability to aggregate flakes of activated sludge. The diameter of the growth retardation of the standard disk with antibiotic (amoxiclav) by the accumulative culture of activated sludge was 17.3 ± 2 mm at a concentration of 4 mg/dm3 and 31.3 ± 3 mm at a concentration of 6 mg/dm3. In the process of studying the state of the activated sludge’s biocenosis under the influence of such toxicants, several regularities were revealed. The directions of using combined approaches of water treatment and wastewater treatment were defined. The structural model of treatment facilities using aerobic and anaerobic bioprocesses together with advanced oxidative technologies was substantiated.

Beef cattle feedlot surface water containing multi-class agrochemicals elicits physiological and behavioral responses among Daphnia pulex

Despite increasing public concern about air and water pollution risks posed by concentrated animal feeding operation areas (CAFOs), there is little information about bioavailability and ecosystem impacts of agrochemicals used to increase productivity. In this study, we investigated the toxicity of wastewaters originating from beef cattle feeding operation on Daphnia pulex. Specifically, we assessed lethal and chronic sublethal exposure effects using various endpoints including survival, oxygen consumption, morphology, reproduction, and swimming behavior. Exposure assessments (acute and chronic) were performed with ten (10) surface water samples collected from on-site retention ponds designated as A, B, C, D, E, F, G, H, I, and R (reference site). Surface water samples were diluted to yield five concentrations (stock, 1 × , 2 × , 3 × , and 4 ×) as treatments and deionized water was used as control. Results showed site-specific and concentration-related effects on toxicity endpoints. Among treatments, significant (p < 0.05) increase in mortality rate (for A, E, F, and H) and decreasing total body length and width (for B, C, D, and G) of D. pulex were observed with increasing wastewater concentration. However, treatments did not have significant effect on swimming behavior (average speed) after exposure to the wastewater samples from all sites except for site E. Evidence from this study suggested that surface waters near beef cattle feed yards affected physiological responses in D. pulex and therefore may similarly affect organisms in the surrounding aquatic ecosystems.