Effect of polysulfonate resins and direct compression fillers on multiple-unit sustained-release dextromethorphan resinate tablets

Development of Dipeptide N–acetyl–L–cysteine Loaded Nanostructured Carriers Based on Inorganic Layered Hydroxides

N–acetyl–L–cysteine (NAC), a derivative of the L–cysteine amino acid, presents antioxidant and mucolytic properties of pharmaceutical interest. This work reports the preparation of organic-inorganic nanophases aiming for the development of drug delivery systems based on NAC intercalation into layered double hydroxides (LDH) of zinc–aluminum (Zn2Al–NAC) and magnesium–aluminum (Mg2Al–NAC) compositions. A detailed characterization of the synthesized hybrid materials was performed, including X-ray diffraction (XRD) and pair distribution function (PDF) analysis, infrared and Raman spectroscopies, solid-state 13carbon and 27aluminum nuclear magnetic resonance (NMR), simultaneous thermogravimetric and differential scanning calorimetry coupled to mass spectrometry (TG/DSC–MS), scanning electron microscopy (SEM), and elemental chemical analysis to assess both chemical composition and structure of the samples. The experimental conditions allowed to isolate Zn2Al–NAC nanomaterial with good crystallinity and a loading capacity of 27.3 (m/m)%. On the other hand, NAC intercalation was not successful into Mg2Al–LDH, being oxidized instead. In vitro drug delivery kinetic studies were performed using cylindrical tablets of Zn2Al–NAC in a simulated physiological solution (extracellular matrix) to investigate the release profile. After 96 h, the tablet was analyzed by micro-Raman spectroscopy. NAC was replaced by anions such as hydrogen phosphate by a slow diffusion-controlled ion exchange process. Zn2Al–NAC fulfil basic requirements to be employed as a drug delivery system with a defined microscopic structure, appreciable loading capacity, and allowing a controlled release of NAC.

Palatability and physical properties of potassium-binding resin RDX7675: comparison with sodium polystyrene sulfonate

Background

Hyperkalemia is a potentially life-threatening condition that patients with heart failure or chronic kidney disease, especially those taking renin–angiotensin–aldosterone system inhibitors, are at high risk of developing. Sodium polystyrene sulfonate (SPS), a current treatment, binds potassium within the gastrointestinal tract to reduce potassium absorption. However, poor palatability limits its long-term use. RDX7675, a novel potassium binder in development for the treatment of hyperkalemia, is a calcium salt of a reengineered polystyrene sulfonate-based resin designed to have enhanced palatability. Here, the physical properties and palatability of RDX7675 and SPS are compared.

Methods

RDX7675 and SPS particle sizes were measured using wet dispersion laser diffraction. Palatability was assessed in a randomized, crossover, healthy volunteer study with two visits. At visit 1 (open label), volunteers evaluated high-viscosity, intermediate-viscosity, and water-reconstituted formulations of RDX7675 (all vanilla flavor), and an equivalent reconstituted SPS (Resonium A^®). At visit 2 (single-blind), volunteers evaluated RDX7675 as a high-viscosity formulation in vanilla, citrus, and mint flavors, and as intermediate-viscosity, low-viscosity, and reconstituted formulations in citrus flavor. Volunteers used a “sip and spit” technique to rate overall acceptability and seven individual characteristics from 1 (“dislike everything”) to 9 (“like extremely”).

Results

RDX7675 particles were smaller than SPS particles, with a narrower size range (RDX7675, 80%, 14–52 µm; SPS, 11.3–124.2 µm), and had a smooth, spherical shape, in contrast to the shard-like SPS particles. Reconstituted RDX7675 was considered superior to SPS for five of the seven palatability characteristics and for overall acceptability (median, visit 1: reconstituted RDX7675, 5.0; SPS, 4.0). High-viscosity vanilla was the most highly rated RDX7675 formulation (median overall acceptability, visit 2: 7.0).

Conclusion

The smaller, more uniformly shaped, spherical particles of RDX7675 resulted in improved palatability over SPS when reconstituted in water. The overall results are promising for future patient acceptability of RDX7675 treatment.

Comparison of clinical efficacy and safety of clopidogrel resinate with clopidogrel bisulfate in patients undergoing percutaneous coronary intervention

OBJECTIVE

A new polymeric salt form of clopidogrel, clopidogrel resinate (CR), is a resinate complex of the (+)-clopidogrel optical isomer wherein the (+)-clopidogrel isomer binds to a water-soluble cation exchange resin via sulfonic acid groups. CR was approved for marketing by the Korean Food and Drug Administration based on a Phase I bioequivalence study. However, no data are available regarding its impact on adverse clinical outcomes in patients undergoing percutaneous coronary intervention (PCI).

METHODS

Clopidogrel bisulfate (CB) was used exclusively from January 2004 through April 2010, after which CR was exclusively administered from May 2010 through September 2011, in 8 centers. We categorized the overall population (N = 10,487) into two groups according to the prescribed clopidogrel type: CB (n = 9,127) or CR (n = 1,360). To minimize the covariate imbalance and confounding in comparing CB and CR, we used a multivariable Cox proportional hazard regression model and the propensity score (PS) method to identify a 1:1 matched cohort (n = 2,470). We compared cumulative adverse outcomes during a 1-year follow-up after PCI in the overall population and in the PS-matched cohort.

RESULTS

In the overall population, there is no difference in the 1-year cumulative event rates between the two groups (CB : CR) : composite of any death, nonfatal myocardial infarction or stroke (6.0 % vs. 6.0 %, adjusted HR, 0.82; 95 % CI, 0.61-1.11, p = 0.57), stent thrombosis (0.4 % vs. 0.2 %; adjusted HR, 0.40; 95 % CI, 0.09-1.72, p = 0.31), and bleeding (0.9 % vs. 0.6 %; adjusted HR, 0.67; 95 % CI, 0.28-1.58, p = 0.22). In the PS-matched cohort, the overall findings were consistent.

CONCLUSIONS

In this large real-world PCI population, CR was as effective and as safe as CB in preventing adverse clinical outcomes.

Comparison of antiplatelet effect and tolerability of clopidogrel resinate with clopidogrel bisulfate in patients with coronary heart disease (CHD) or CHD-equivalent risks: a phase IV, prospective, double-dummy, parallel-group, 4-week noninferiority trial

BACKGROUND

Clopidogrel resinate is a resinate complex of (+)-clopidogrel optical isomer, wherein the (+)-clopidogrel isomer binds to a water-soluble cation exchange resin via sulfonic acid groups. It was approved by the Korean Food and Drug Administration on the basis of a Phase I study that demonstrated the bioequivalence of clopidogrel resinate and clopidogrel bisulfate. However, there are no available data regarding efficacy and tolerability in patients with vascular disease.

OBJECTIVE

The goal of this study was to investigate the antiplatelet efficacy and tolerability of clopidogrel resinate in patients with coronary heart disease (CHD) or CHD-equivalent risks.

METHODS

This study was a Phase IV, randomized, double-blind, double-dummy, parallel-group, noninferiority trial. We prospectively recruited patients in 10 centers between March 2008 and July 2008. Patients who had documented CHD or CHD-equivalent risks were randomly assigned to 1 of 3 groups: group A, aspirin (100 mg) + clopidogrel bisulfate placebo + clopidogrel resinate placebo; group B, aspirin (100 mg) + clopidogrel bisulfate placebo + clopidogrel resinate (75 mg); or group C, aspirin (100 mg) + clopidogrel bisulfate (75 mg) + clopidogrel resinate placebo. The primary outcome was the percent P2Y(12) inhibition after medication, assessed by using a point-of-care assay. If the 1-sided 90% upper confidence limit for the difference was less than the prespecified delta value (-5.7), clopidogrel resinate would be considered noninferior to clopidogrel bisulfate. The secondary outcome, the prevalence of adverse events (AEs) associated with study medications, was assessed at each visit by direct interview.

RESULTS

A total of 314 patients (mean [SD] age, 62.2 [9.0] years; male 63.7%; weight, 67.3 [13.6] kg [range, 45-102 kg]; all Asian) were enrolled, and 287 patients finished the study (group A, n = 97; group B, n = 90; and group C, n = 100). Eight patients took no study medications and were excluded from the tolerability and efficacy analyses. Nineteen patients discontinued the study because of protocol violation (n = 15), adverse events (n = 3), or voluntary withdrawal (n = 1) and were excluded from the efficacy analysis. There were no significant differences in baseline clinical characteristics among the groups except for the frequency of a history of CHD (group A, 85.4%; group B, 73.0%; and group C, 88.3%; P = 0.01). Patients treated with either type of clopidogrel showed significant inhibition (mean [SD]) of P2Y(12) (group A, -5.9% [15.1%]; group B, 23.4% [21.9%]; and group C, 19.5% [23.8%]; P < 0.001). Differences between clopidogrel resinate and clopidogrel bisulfate in the inhibition of P2Y(12) did not exceed the predetermined value for inferiority (P for noninferiority, 0.02; 90% CI, -0.9 to 10.3). In the tolerability analysis, there was no mortality during the study period and no significant differences between groups in the frequency of AEs and serious AEs (AEs: group A, 33.0%; group B, 26.0%; and group C, 23.3% [P = 0.27]; serious AEs: group A, 1.0%; group B, 3.0%; and group C, 1.0% [P = 0.42]). One patient in group B underwent coronary stent implantation for treatment of stable angina.

CONCLUSIONS

In this small, selected Asian patient population, differences in the platelet inhibition efficacies of clopidogrel resinate and clopidogrel bisulfate did not exceed the predetermined limits for noninferiority. The differences in tolerability between the 2 drugs did not reach statistical significance.

Effect of a pharmaceutical cationic exchange resin on the properties of controlled release diphenhydramine hydrochloride matrices using Methocel K4M or Ethocel 7cP as matrix formers

This work was aimed at evaluating the effect of a pharmaceutical cationic exchange resin (Amberlite IRP-69) on the properties of controlled release matrices using Methocel K4M (HPMC) or Ethocel 7cP (EC) as matrix formers. Diphenhydramine hydrochloride (DPH), which was cationic and water soluble, was chosen as a model drug. HPMC- and EC-based matrices with varying amounts (0-40%w/w) of resin incorporation were prepared by a direct compression. Matrix properties including diameter, thickness, hardness, friability, surface morphology and drug release were evaluated. The obtained matrices were comparable in diameter and thickness regardless of the amount of resin incorporation. Increasing the incorporated resin decreased the hardness of HPMC- and EC-based matrices, correlating with the degree of rupturing on the matrix surfaces. The friability of HPMC-based matrices increased with increasing the incorporated resin, corresponding to their decreased hardness. In contrast, the EC-based matrices showed no significant change in friability in spite of decreasing hardness. The incorporated resin differently influenced DPH release from HPMC- and EC-based matrices in deionized water. The resin further retarded DPH release from HPMC-based matrices due to the gelling property of HPMC and the ion exchange property of the resin. In contrast, the release from EC-based matrices initially increased because of the disintegrating property of the resin, but thereafter declined due to the complex formation between released drug and dispersed resin via the ion exchange process. The release in ionic solutions was also described. In conclusion, the incorporated resin could alter the release and physical properties of matrices.